i have Ubuntu dual booted with windows 7 32 bit, i am running out of space on my hard drive and am not using the 100 gigabytes i partitioned of for Ubuntu, i was hoping that someone might know how to change the partition size as i cant find out how to do it.
View 1 Repliesback to make my main partition (C: ) where I installed windows only 50gb big. What I wonder is, is it possible to decrease the second partition in size and move that extra size to the main partition without damaging data on both partitions?
View 5 Replies View RelatedI think I made a mistake, as when I partitioned my drive after I bought my laptop, I set my Windows partition(C to a much smaller size than usual (30gb). Now I see in the Computer section in win 7 64bit that the drive has like 3 gb of free space. Is that enough for running ? I would like to increase the size of this partition, but with the ordinary way, I can just lower the size, not increase it.
Also, I would like to change the menu and running language to English. Laptop is in German right now, I speak the language, but I`ve gotten used to having my software in English...
Lately on my IBM computer i have been hosting a minecraft server. I host this server using Mine OS Crux. This is a free linux operating system that lets anyone host a 24/7 minecraft server.
Just today i ran out of space on the partition it is running on. Partiton wizard looks at it as a "other" partiton. This prevents me from resizing it..
Can we change taskbar icons' size to a specific size other than two default windows defined sizes?
View 5 Replies View RelatedI deleted the ubuntu partition now windows wont boot. I have tried the recovery disk and tried "bootrec /fixmbr" but it didnt work.Now the win7 installation is not showing up in the recovery console.When I turn the laptop on I get "Insert System Disk in drive Press any key when ready".
View 5 Replies View RelatedI'm trying to load Windows 7Ultimate over an already installed Linux Ubuntu 10.10 os. Now, I am the opposite of a tech head...techno-phobe! I can not seem to get any response from the disk! How do I disable Ubuntu and load Windows . I don't mind loosing Ubuntu as all my files are saved to a flash drive thing.
View 3 Replies View RelatedSo the other day I decided that I wanted to try dual-booting Ubuntu 10.04 on my HP Pavilion dv7-4083cl Entertainment Notebook that already had Windows 7 Home Premium 64bit installed. I shrank the main (biggest) partition by 100Gigs and then installed Ubuntu 10.04 on that 100Gigs of unallocated space. All worked fine, except when I tried to boot Windows 7 from the grub menu, it would come up to the beginning Windows 7 animation and then it would crash. So, I downloaded a Windows 7 Recovery CD and tried a few of the tools there. I did not create a system recover image prior to my troubles, so I could not recover the easy way.
After that, I tried the Startup Repair tool, which did not work. I read somewhere to try that Startup Repair tool 2 or 3 times, which I did. The third time, it seemed to freeze; it was "working" for about 6 hours, at which point I decided that it was enough and shut down the PC. That was a mistake... From that point forward, I still could not boot into Windows, but also every time I tried to boot into Ubuntu, I had to perform a disk check, which always failed! After trying that a few times, I had had enough yet again and decided to just reinstall Ubuntu. The install seemed to work fine, but once I rebooted I could not boot into Ubuntu (or Windows 7). No matter what option I select from the grub menu (or if I push F11 to go into recovery partition), it gives me an error that says "Error: No such partition" and dumps me into a grub rescue prompt...
After releasing multiple bouts of turrets, I tried booting from my Ubuntu LiveUSB again (same one I installed Ubuntu with twice) and ran Gparted to look at my partitions. It only showed me the one 100Gig partition and said the remaining ~350Gigs were unallocated! So now I'm stuck with no bootable operating system (on my HD), and to top it off, HP just sent me their "official" recovery disks that are trying to reformat my HD and erase all my data...
I know there has to be a way to restore my partitions and replace the grub bootloader with the Windows 7 bootloader. At this point I don't care about Ubuntu at all. All of my data was on the Windows 7 partition (which I cannot access from Ubuntu to grab it).
I can provide any information that you need, but remember that I can only do so via either BIOS or by booting Ubuntu from the LiveUSB. I cannot access Windows 7. I also do not have a Windows 7 install disk as this was a refurbished HP laptop that I bought from Costco...
I'm preparing a fresh install of Win 7 Pro on a 2 disk system (90GB SSD and 1TB HDD). I'll be placing the OS/Apps on the SSD and Data and image restore files on HDD.Qs:1. If I allocate ~60GB for the OS/Apps partition, and actual storage of the OS/Apps is 35GB...what size partition do I need on the HDD to save this image file? I assume the compressed file will be 45-50% of original. Will I want to store multiple image files created over the course of time as apps are added and system is further optimized, and hence need a partition that is a multiple of the OS/App partition size? What do you do?2. Also, an 8GB RamDisk will serve as scratch disk space for some apps (RamDisk +) which can save an image of the session's writes upon shutdown. I plan to save this image to the 2nd HDD. Is it recommended that I save this to same partition that stores the OS/App image in Q #1 above,
View 9 Replies View Relatedi have a laptop which is emachines D525,when i bought it.. it have windows xp system.. last week ive change it to ubuntu. so i decided to change it to windows 7.i want to install windows 7 without cd.
View 1 Replies View RelatedI have a dual Ubuntu 11.10 and Windows 7 Home Basic booting system on my laptop (VAIO, specs at the end). Each time I switch on my laptop, Ubuntu's GRUB first shows me the options as to which OS to boot from. The choices include Ubuntu and Windows 7. To install Ubuntu,I made a 25 GB unallocated volume on my hard disk. Recently, while updating Ubuntu to its latest version, my internet crashed and the download only partly succeeded. After that, I have never been able to use Ubuntu on my laptop. However, GRUB is still functioning; each time I switch on, I still see the options as to which OS to boot from. If I choose Windows 7, then I get the usual Windows 7 Booting screen.Basically, I now have 25GB of space lying unusable on my machine. I want to merge this with one of my other partitions. However, I fear that doing so would delete GRUB and make my laptop impossible to boot. What steps should I take? Is there any way whereby I can safely delete Ubuntu and change the boot sequence from GRUB to the Windows boot program? (I guess it is BOOTMGR.EXE)
View 1 Replies View RelatedI am thinking about dual-booting my system with Windows 7 as the main OS, and linux ubuntu as a secondary. I have a few questions:
1. How much space should I leave for ubuntu's partition?
2. How do I make a swap partition (or whatever it is called, for swapping files between OS's)?
3. Can I set it up to automatically boot into windows unless I am holding down a specific key, or something similar?
BTW, my HDD is ~500gb, but my current (factory) windows partition is 450gb.
I installed ubuntu. After that my windows 7 is at the bottom of the boot sequence. How I change it to first.
View 3 Replies View RelatedRecently I installed ubuntu 11.04. Now I have deleted the ubuntu partition using windows disk management. Now I can't boot the windows os! Even I tried the FIXMBR commands! Now it is showing 'BOOTMGR not found".
View 9 Replies View RelatedI deleted the Ubuntu 10.04 partition in windows computer management/disk management. Then i shut down the computer, upon booting up i was greeted with an grub error and unable to boot into windows. I used super grub disk, now windows boots up fine now. I'm left with this now, three other partitions and a 218gb of free space. How can i allocate my free space (218gb) to my C: drive? I right click my C: drive but the extend volume is grayed out. Only the Shrink volume is selectable.
View 3 Replies View RelatedI found out that the partition size exceeded the roughly 200Gig (approximately or less - from running Vista on two machines). I was not sure if the maximum partition size was dependent upon the operating system or the motherboard chip-set.I ended up crashing my original ATA 133 500 gig drive on the C: partition. The drive was an ATA drive and my plan is to install a Blu-Ray / DVD RW drive. Currently I have a DVD Read Write installed and it wouldn't hurt to keep both of the optical drives on the motherboard's ATA pins.This will delegate the 500 gig Maxtor drive to a USB backup or possibly for my PS3. This leaves the 1TB drive and a couple of questions.1) I intend to partition the 1TB drive in into 2 partitions. This is to prevent the loss of the entire partition (as what happened to the ATA drive) and protecting the second partition for downloads and backups. For a reasonable price I can add another (up to 8) SATA drive[s] and rather than use them to automatically copy the other SATA, I will add additional storage.(2) The mainboard was made for compatibility with Vista (another question). Am I correct in assuming that the MSI CoreCell(tm) nForce 570 Chipset board with an AM2 AMD Athlon(tm) 64/FX/X2 Processors and 2 Gig or ram will not operate properly (true multitasking) with Windows 7 Home Premium (64 bit) operating system. Am I better off waiting for a true i5 board?
View 1 Replies View Relatedwhat is the optimum partition size for windows 7 64 bit on a 1 TB hard drive?
View 1 Replies View RelatedI have installed Windows 7 as a VM in vmware player (recommended by an acquaintance) so I could then run Adobe Lightroom as a windowed application in OpenSuse, I rather stupidly (it now appears) created the VM with a 15GB drive. When working with more than a coupe of images at a time I get out of memory errors in the VM, presumably due to the lack of free space for temp files in Lightroom and swap file usage. Is there an easy way to increase the VM drive or would it be simpler to delete the VM and set it up again with a larger drive.
View 3 Replies View RelatedI would like to add a second hard drive to my hp pavilion p7-1027c desktop machine and would hate to buy a drive that is not used to its' full capacity
View 2 Replies View RelatedIm using dell inspiron 1564.this is a dual boot system-(windows7 & ubuntu). Recently my system got affected by viruses. Even-though i have a working antivirus I get frequent pop-ups saying "threat detected". I'm tired with deleting those viruses. so decided to restore system from OEM partition to get rid of all those viruses. before installing ubuntu I had a single partition (c:), then i made it into two partitions one for ubuntu clean install. now if I restore my system to factory settings from OEM of windows7 will the partition of ubuntu get formatted or deleted?
View 1 Replies View RelatedI am working on windows 7 (64 bit ) . Can i have Ubuntu installed in another partition ? I tried to install ubuntu but unable to complete the process. Is it because Ubuntu works only on 32 bit ? or the installation CD corrupted ?
View 4 Replies View RelatedI want to repartition my HDD which has a capacity of approximately 80 GB, but it is shown as 74.5 GB in windows disk management app. I have split the hard drive into 3 partitions of equal size each of 24.8 GB and installed windows 7 ultimate (32-bit) on one partition, and the other two are for my data (including documents, music, videos, pictures etc.). In my opinion, 24.8 GB partition is not enough for Windows 7 because it is the only OS that I use and as I install updates and service packs etc, it fills up gradually and leaving only a few GBs of free space left on the Win 7 partition.
View 7 Replies View RelatedI have a MSI K9N Platinum mainboard with 2-Gig of ram (chosen so that I can over-clock the board if I choose). I have the NVIDIA 570 Chipset with an AM2 AMD Athlon(tm) processor. I had it set up with a 128-Gig partition that I set up when I had Vista Professional (64-bit) installed. A year ago or so I upgraded to Windows 7 Home which worked out much better (even if the mainboard was pre-Windows 7). I installed a PNY Nvidia 210 video board (but am having some trouble getting the driver to work with Windows 7).
My main harddrive is a Maxtor 500-Gig ATA drive that is partitioned with 128-Gig for the C: drive which was the maximum I could use at the time with Vista Pro. I also have a 1TB SATA drive installed for data storage and another 1TB Seagate USB drive for media storage. There is also another 1TB backup drive (Maxtor) connected to my Fios Router.I am having problems with the 500-Gig ATA C: drive - bad sectors or corrupted data. I've isolated most of the data but can't remove it. I need to keep the computer up and working and have wasted enough time with the bad drive.
I want to use the SATA drive installed on the MSI mainboard. Can you tell me what the largest partition size I can have to install Windows 7 Home (assuming I can remove it from my main hard drive on this machine before or after to allow a new installation). I use the primary drive mostly for program installation although Windows 7 generally places all of the libraries on the same drive as a default. If it won't slow me down, I would like to use as much of the 1TB SATA drive as possible. Is there a maximum partition size that I need if I convert the SATA drive to replace the C: drive or boot drive?
Can I reduce the size of primary partition with huge amount of memory like 500GB.
View 1 Replies View RelatedI want to increase my C Drive 20 GB size to 40GB. How is it possible.
View 4 Replies View RelatedIncrease partition size on C drive for windows 7 32-bit?
View 6 Replies View RelatedHow I can increase partition size on C drive for win 7 32 bit ?
View 1 Replies View RelatedI have a small query about this whole partitioning business. I'm trying to set up a partition so I can dual-boot Windows 7 and Ubuntu.
My computer came with a Dell Recovery partition and an OEM partition as well as the main C: drive, which are all primaries. I've created a new logical drive, which I've called Z:, with the idea being to install the Linux OS in that chunk of the drive.
My first question: First up, I've formatted it as "exFAT" - is this the same as FAT32?
Next question: can I divide this 'Z' into smaller chunks with different formats, or do they all have to be the same format? I was hoping to be able to format a small bit of the drive into a Linux file-system so that both OSs can be kept entirely separate from each other, but leave the bulk of it as FAT so that I can see my files with both OSs. If this is not possible, what would be the best way to achieve the desired result?
What is the recommended partition size for Windows 7 Home Premium?
View 18 Replies View RelatedI don't have a windows seven OS before so I don't know the size of it and all that.
I'm going to get a Sager NP5160 soon and I plan to get WINDOWS 7 HOME PREMIUM 64 BIT as 2 partitions on my 320 GB Hard Drive.1. OS partition 2. All the other stuff like programs, files, etc.Can you recommend me a good size ?I plan to use this laptop for 5+ years and no hard drive upgrade!
Considering a self build project : Intel E5700 CPU 2 X 2 Gig Ram 1 TB SATA HDD. What would be the optimum partition size for the Windows 7 Home Premium 64bit OS
View 8 Replies View Related