How To Reduce Size Of Primary Partition In Windows 7
Aug 18, 2012Can I reduce the size of primary partition with huge amount of memory like 500GB.
View 1 RepliesCan I reduce the size of primary partition with huge amount of memory like 500GB.
View 1 RepliesI am unable to reduce the size of my OS(C) partition to desired size. I've written my recovery disks in case of any problems.
The Shrink C box shows available shrink size is 0. I understand this is because there are unmovable files in the way. One post I saw said to disable system recovery. This is a brand new machine that I want to make dual boot Windows and linux. Want only about 80GB for Windows and 300 for linux. I also saw where someone suggested to use ghost program, then wipe C drive clean and reinstall Windows OS on smaller partition. Sounds drastic.
back to make my main partition (C: ) where I installed windows only 50gb big. What I wonder is, is it possible to decrease the second partition in size and move that extra size to the main partition without damaging data on both partitions?
View 5 Replies View RelatedI guess gmail won't allow 5 mb attachment. How do I make this smaller? I already compressed it.
View 5 Replies View RelatedYesterday I turned on my desktop PC and the desktop screen, all the icons and the toolbar was much larger than they have ever been before. I have searched the forums and they all say to change the screen resolution. I have checked this and it is 1024 x 768 and the dpi is 100% at 96. I have tried clicking the desktop and scrolling the mouse back too but nothing has worked. Another forum suggested upgrading the graphics driver which I did but that just made it worse so I uninstalled that. I also did a System Restore and that didn't work either.
View 5 Replies View RelatedI recently got an Acer 1810TZ with win 7 installed. My desktop runs win 2000 and the OS is currently less than 2.5Gb and I consider that bloated as originally it was more like 1.4Gb. I like to image and can easily put that on a dvd even without compressing the file.
On my new Acer the OS is taking up between 12 - 14Gb depending if I have a restore configured. I have partitioned the HD into several partitions. I only keep the OS and absolutely min stuff on my C drive and I have one partition dedicated to the page file only, 3Gb, and have all my programs etc installed on another partition. The recycle bin has also been reduced to 256mb on the C drive
Is there a way to significantly reduce the OS (C drive) to say less than 4Gb ?
I just built a PC and installed Win 7 ultimate on a 240GB SSD (223GB usable) and I noticed after the installation 153GB of the drive is already used which seems like a lot. This is a brand new drive so there shouldn't be anything else on there. I'd like to shrink the footprint a little bit in order to keep the drive from filling up. I have an additional 1 TB drive which I'm going to try to to store most everything on, but I'd like to try and free up the SSD as much as I can.
View 1 Replies View RelatedIn Windows7, how do you reduce the size of an icon on the desktop
View 1 Replies View Relatedhow do you set the screen size to 100%?
View 3 Replies View RelatedI have an HP Notebook. On Windows XP, at the bottom right on the Taskbar is an option for the screen size. 100%, 150%, 50% etc.I have a program which is too big for my Notebook screen. Are there any ways I can reduce the size of the text as in XP, so that the program fits my screen?There are a few buttons at the bottom of the program I need to get to but at present, I cant because it is too big for the screen.Any ideas how I reduce it to 50% or 75% as in Windows XP?
View 3 Replies View RelatedI had my friend Dell Laptop. He want me to create a two extra partitions in existing primary partition which is C:The HDD is 1TB in size.One hour ago I had used Dell data backup program and created recovery discs and then formatted the Laptop to factory default. I thought before formatting it will give me options to create a partitions but it did not had any option.
View 6 Replies View Relatedi dont have the blue colour window above my C drive in my computer
View 4 Replies View RelatedI'm trying to shrink my primary Windows partition because I want to create a partition to install Linux Mint on. Well, when I go into the Windows Disk Manager and try to shrink the partition, it doesn't let me shrink it more than 32MB. I need quite a bit more space than that.I've disabled System Restore, Hibernation, and the page file.After defragging, I had 200MB of space available to shrink with. That's not much of a step up.I also want to try to avoid third-party applications unless they're basically guaranteed to work. I've heard some horror stories about third-party partitioners completely ruining systems.
View 7 Replies View RelatedCan I reinstall W7 on just the partition it's residing in as long as I back up the registry and needed files from my profile? I've never done this before..
View 1 Replies View RelatedI am on my grandparents desktop, and they recently had me dual boot Windows 7 onto their Windows XP machine, and they now no longer need XP anymore. The XP partition is listed as a System, Healthy, Active, Primary partition. The 7 partition is listed as a Boot, Active, Healthy, Logical partition. How can I delete/format the XP partition and make the Windows 7 a primary partition? I have tried by using Disk Manager, and Eauseus Partition Manager, but it won't let me convert it to primary, or format the XP partition.
View 14 Replies View Relatedi had windows 7 OS in drive c . while i was partitioning drive c using disk management, disk 0 which has all recovery image drive c were converted to simple type.
View 5 Replies View RelatedI have two primary partitions and I want to delete one of the and completly expand the other. When i get in my computer/manage/disk management if i right click a partition it won`t let me le delete it or expand it. How can I have A SINGLE hard drive completly expanded ?
View 8 Replies View RelatedI want to format my D: drive to clear some space. Thing is my D: used to be my C: drive under XP when i was dual booting so its showing as an active primary partition and Windows 7 wont let me format it.
Ive tried deleting everything but some things are refusing to go (like the file boot which i assume is to do with dual booting).
I reach my limit and have 3 primary partition but I want to create one more. So is there any software or method to create a primary partition?
View 5 Replies View RelatedRunning out of space and I'd like to extend my primary (C) partition to the next drive (D) but in computer management D is listed as "Page file, Logical drive" and it will not allow me to delete it.
Would moving page file from D to E partition allow me to extend C into D? If so, how do I move page file in Windows 7 to another partition?
If I can't do this in Windows natively does someone have a suggestion on 3rd party software?
I have a new Laptop with Windows 7 Home edition (factory installed). It has only primary C: partition.
Is there any tweak to partition the HDD directly using windows without re-formatting the HDD
kay I am trying to make bootable USB so I can reinstall my Windows 7, but when I get to the step to create partition primary, it tells me there is insufficient space to do so. What's up with that? I really need to get my laptop back working before the 14th, because I am going up to my grandparents' house for the summer and would like to bring my laptop with me. I also don't want them to find out I broke it so...heh.Also, I've tried burning the ISO to a 4GB DVD disk with ImgBurn but every disk I do gives me an error, and I only have 3 DVDs left and I don't want to try again because I don't want to waste them. I actually just went out to buy this USB so I'm really upset that I'm having issues with it
View 3 Replies View RelatedAt the end of each semester, I typically restore my primary laptop (Asus G1S) to the factory default settings. I realize that this isn't technically necessary, but there's something psychologically pleasing about a freshly installed operating system. It's somewhat like returning to a hotel room in the afternoon after the maid has tidied up. The bed is made, the bathroom is stocked with clean towels, and the free water bottles have been replenished.
I'm currently downloading the Windows Seven installation files, and have been reading through various guides. Many writers recommend partitioning one's hard drive to permit a dual boot. However, since I've just restored my system completely, I would rather just turn the entire thing over to Windows 7 without any Vista remnants clogging up the machine. If things go south, I can always unpack the restore disks and revert to the factory default state.
Is this advisable and possible? Can I completely wipe out Windows Vista and turn my machine entirely over to Windows 7?
I just got my laptop back from Acer and they had given me a new hard drive. I restored a disk image backup that I had made from Acronis True Image. The backup seemed a little strange going in, but none the less it worked anyway. I then went to Disk Management to look at the setup and noticed that my primary partition is now listed as a Logical. I'm posting a screen shot of the partions and someone tell me if that looks right to them and if not how do I get my C drive back to Primary. As I said it boots ok but when I did the recovery with Acronis it didn't seem to go as smoothly as it should have.
View 9 Replies View RelatedHere's the scenario: I have a 1TB disk with several partitions on it.
#1: Primary partition with Vista on it.
#2: A 500GB primary partition used as storage/backup.
#3: A 50GB partition encrypted with Truecrypt, Logical drive
Now, I want to create a new Primary partition at the end of the drive, so I can install another copy of Windows 7. Notice my 500GB storage partition does not need to be Primary, but it is, and I cannot create any more Primary partitions. How can I change the storage partition to a logical drive, and have my new partition be Primary?
I noticed this problem when I tried to delete something off the drive, then I tried to run an antivirus scan and it gave me an error if incapacity to delete viruses due to a dirty disk and that I should run chkdsk.So I right clock on the drive and attempt check now. It tells me that it must first dismount the drive before it can do so and asks if I would like to force a dismount. To which I respond yes. Then, the window disappears and I hear no word or see no signs of any chkdsk happening. Naturally I reboot the terminal expecting fire-works and chemistry, but get greeted by the sound of windows starting up again.I have tried the administrator driven command prompt in this sequence. C:WindowsSystem32>chkdsk x:/f
response:
The type of file system is exFAT.
Volume Serial Number is 2C7E-22C5
C:WindowsSystem32>
then:
C:WindowsSystem32>chkdsk x:/r
response:
The type of the file system is exFAT.
Chkdsk cannot run because the volume is in use by another process. Chkdsk May run if this volume is dismounted first. ALL OPENED HANDLES TO THIS VOLUME WOULD THEN BE INVALID. Would you like to force a dismount on this volume? <Y/N>
response:
Volume dismounted. ALL opened handles to this volume are now invalid.
Volume Serial Number is 2C7E-22C5
C:WindowsSystem32>
then:
C:WindowsSystem32>chkdsk x:/r
[code]...
I have Windows XP64 and XP 2005 installed on adjacent partitions on an 80 GB IDE hard drive. I had been accustomed to using BIOS to choose the drive and EasyBCD to choose the OS. A few days ago I was unable to boot into this drive because I kept getting the error "NTLDR missing (press Ctrl-Alt-Del)." I tried using Microsoft's BCSetup2 (I think that's what it's called) but couldn't get a floppy disk to boot.
Being that there wasn't much on this hard drive, other than the Windows OS's, I decided to reinstall the Win64 on the first partition. I find now that EasyBCD does not install on my XP64, so evidently I must have had it installed on the XP MCE partition. I'm wondering now how I can go about accessing the MCE on that other partition, or finding or remaking the boot loader.
I want to add a new internal 1TB HDD with 2 partitions: 100GB for scratch disk space for Adobe CS, Autocad etc. and the remaining 900GB for User Data. My OS/Apps is on a 90GB SSD with no partitions. I have read the tutorial on creating a new partition but several questions remain unanswered..
1. should both the "S" partition ("S"cratch space) and "U" partition (User Data) be extended partitions, or should the "S" partition be Primary? If I desired to direct temp files here and possibly a 2nd pagefile...would that dictate primary or extended type? Is it OK to perform all these functions on this partition (scratch space, temp, pagefile?).
2. I want the "S" scratch disk partition to be on the outer edge of the drive so that it is the fastest. Do I create this partition 1st or 2nd?
3. Since I'm not installing an OS on this HDD, the 100MB "recovery" partition will not be created on this one? Would it be advantageous to have such a partition if the other SDD with OS/Apps fails?
4. Does the tutorial here still the correct steps for what I want to do?Partition or Volume - Create New
I have Intel X-25M 80 GB SSD. I want to install Windows 7 Pro x64, MS Office and other application on it.Should I create partition primary align=1024 or Create partition primary size=100 align=1024?
View 4 Replies View RelatedI have used a DOS utility called copywipe 1.14 to wipe a hard drive for a clean installation of windows 7. However, the utility has not only removed all data from the hard drive, it has also deleted the primary partition and master boot record as far as I am aware. create a primary partition on the hard disk and get it active and ready to accept an installation of Windows 7. I have a bootable USB stick with the windows 7 installation files and prefer to use this for the install as the DVD drive is working inconsistently.However, I think that I need a bootable USB stick with the FDISK and FORMAT programs on it before using the other USB stick with the windows installation, or at least that is my understanding? If my understanding is correct, how do I get a bootable USB stick with the FDISK and FORMAT programs onto it?
View 9 Replies View RelatedI'm currently running Win XP Pro. on dynamic disks with the system partition mirrored.I have a 20GB simple volume on one of the dynamic disks which I had intended to install a copy of Windows 7 Enterprise on, intending to dual-boot as I changed over from XP to 7, but it appears that you can't install Windows 7 on a dynamic disk as "setup cannot find a location for temporary files." According to Microsoft my only option is to revert the existing dynamic disk/s to basic - losing everything on it including my XP installation.Microsoft says not to mix volumes and partitions on the same disk, but a third party application called Dynamic Disk Converter claims to be able to change simple volumes back to primary partitions - though it isn't clear from the documentation if this can be done to just one volume out of several on a dynamic disk.My options appear to be:
1. Get another hdd for Windows 7.
2. Break the XP mirror and convert one dynamic disk back to basic for Windows 7 - losing my RAID protection
3. Ignore Microsoft's advice and see if Dynamic Disk Converter actually can convert a simple volume back to a primary partition, risking my whole installation.