Recommended Partition Size For Windows 7 Ultimate?
Jan 15, 2013
I want to repartition my HDD which has a capacity of approximately 80 GB, but it is shown as 74.5 GB in windows disk management app. I have split the hard drive into 3 partitions of equal size each of 24.8 GB and installed windows 7 ultimate (32-bit) on one partition, and the other two are for my data (including documents, music, videos, pictures etc.). In my opinion, 24.8 GB partition is not enough for Windows 7 because it is the only OS that I use and as I install updates and service packs etc, it fills up gradually and leaving only a few GBs of free space left on the Win 7 partition.
I'm preparing a fresh install of Win 7 Pro on a 2 disk system (90GB SSD and 1TB HDD). I'll be placing the OS/Apps on the SSD and Data and image restore files on HDD.Qs:1. If I allocate ~60GB for the OS/Apps partition, and actual storage of the OS/Apps is 35GB...what size partition do I need on the HDD to save this image file? I assume the compressed file will be 45-50% of original. Will I want to store multiple image files created over the course of time as apps are added and system is further optimized, and hence need a partition that is a multiple of the OS/App partition size? What do you do?2. Also, an 8GB RamDisk will serve as scratch disk space for some apps (RamDisk +) which can save an image of the session's writes upon shutdown. I plan to save this image to the 2nd HDD. Is it recommended that I save this to same partition that stores the OS/App image in Q #1 above,
I was wondering how many Gigs is Windows 7 ultimate?Not how many ram and memory it takes up on the disk, but stand alone, how many gigs is the cd itself
I found out that the partition size exceeded the roughly 200Gig (approximately or less - from running Vista on two machines). I was not sure if the maximum partition size was dependent upon the operating system or the motherboard chip-set.I ended up crashing my original ATA 133 500 gig drive on the C: partition. The drive was an ATA drive and my plan is to install a Blu-Ray / DVD RW drive. Currently I have a DVD Read Write installed and it wouldn't hurt to keep both of the optical drives on the motherboard's ATA pins.This will delegate the 500 gig Maxtor drive to a USB backup or possibly for my PS3. This leaves the 1TB drive and a couple of questions.1) I intend to partition the 1TB drive in into 2 partitions. This is to prevent the loss of the entire partition (as what happened to the ATA drive) and protecting the second partition for downloads and backups. For a reasonable price I can add another (up to 8) SATA drive[s] and rather than use them to automatically copy the other SATA, I will add additional storage.(2) The mainboard was made for compatibility with Vista (another question). Am I correct in assuming that the MSI CoreCell(tm) nForce 570 Chipset board with an AM2 AMD Athlon(tm) 64/FX/X2 Processors and 2 Gig or ram will not operate properly (true multitasking) with Windows 7 Home Premium (64 bit) operating system. Am I better off waiting for a true i5 board?
I have installed Windows 7 as a VM in vmware player (recommended by an acquaintance) so I could then run Adobe Lightroom as a windowed application in OpenSuse, I rather stupidly (it now appears) created the VM with a 15GB drive. When working with more than a coupe of images at a time I get out of memory errors in the VM, presumably due to the lack of free space for temp files in Lightroom and swap file usage. Is there an easy way to increase the VM drive or would it be simpler to delete the VM and set it up again with a larger drive.
I would like to add a second hard drive to my hp pavilion p7-1027c desktop machine and would hate to buy a drive that is not used to its' full capacity
i have Ubuntu dual booted with windows 7 32 bit, i am running out of space on my hard drive and am not using the 100 gigabytes i partitioned of for Ubuntu, i was hoping that someone might know how to change the partition size as i cant find out how to do it.
I have a MSI K9N Platinum mainboard with 2-Gig of ram (chosen so that I can over-clock the board if I choose). I have the NVIDIA 570 Chipset with an AM2 AMD Athlon(tm) processor. I had it set up with a 128-Gig partition that I set up when I had Vista Professional (64-bit) installed. A year ago or so I upgraded to Windows 7 Home which worked out much better (even if the mainboard was pre-Windows 7). I installed a PNY Nvidia 210 video board (but am having some trouble getting the driver to work with Windows 7).
My main harddrive is a Maxtor 500-Gig ATA drive that is partitioned with 128-Gig for the C: drive which was the maximum I could use at the time with Vista Pro. I also have a 1TB SATA drive installed for data storage and another 1TB Seagate USB drive for media storage. There is also another 1TB backup drive (Maxtor) connected to my Fios Router.I am having problems with the 500-Gig ATA C: drive - bad sectors or corrupted data. I've isolated most of the data but can't remove it. I need to keep the computer up and working and have wasted enough time with the bad drive.
I want to use the SATA drive installed on the MSI mainboard. Can you tell me what the largest partition size I can have to install Windows 7 Home (assuming I can remove it from my main hard drive on this machine before or after to allow a new installation). I use the primary drive mostly for program installation although Windows 7 generally places all of the libraries on the same drive as a default. If it won't slow me down, I would like to use as much of the 1TB SATA drive as possible. Is there a maximum partition size that I need if I convert the SATA drive to replace the C: drive or boot drive?
This query is concerning how Win 7 Ultimate Scheduled Backup works.These are my needs.Often in the past, Windows 7 has become unstable in some way, such that different pgms including Windows Explorer, and other system tools become corrupt. I decide to re-install Win 7 Ultimate 32bit.I have an external 500Gb drive with an Acronis True Image Home 2009 full partition backup on it. The backup is a fully updated, fully game installed backup, and is way faster to use compared to the individual software installations. Since Windows 7 starts acting up about every 3-6 months for me, I replace it.Recently (last restore) I decided to let win Backup and Restore do a scheduled backup every 7 days. I let Win choose what to backup. I intend to let Win be THE backup to use to replace the OS when needed. I have always had problems running out of space where to let Win Backup to on some drives, so I dedicated a 443Gb partition to Backup only. This is on the other half of a 1Tb drive. (I know in some cases it is not wise to use the same drive, but I put all the important things on another physical drive) I have 4 drives, totaling about 3.8Tb. 2 have XP Pro, and 2 have Windows 7 Ultimate. The main C: is 487Gb, with 231Gb used space. The other half of it is N: 443Gb; on which the Backup is written to each week. The size of the backup is now 407.12Gb. The backup on N: is approaching TWICE the size of the used space on the C: drive! And within about a month there will be no more room.I want mainly to retain a pristine Operating System to reload, along with the basic games which are huge. This will save the time WHEN, not IF Windows 7 begins to fail again. (not saying it is a bad or weak OS, just that it fails for me for reasons needing replacement. If only it were as robust as XP has been in the past.)
1. How can I retain a PERFECT OS and games image to use as a basic unchanged original with Win Backup?
2. As Win gets corrupted, how can I know that the latest Backup I might want to restore from isn't corrupt?
3. Can Backup be set to not make redundant Backups that become so huge, yet maintain the original perfect OS and game set, such as a dated incremental backup that can be used to piece together a C: drive again?
4. How do I know that Backup isn't backing-up malware?
5. If I save the latest backup, and the first one, how big should each one actually be?
6. Can I get into the actual backup files individually to decide if I want to restore from them--the options are limited.
7. Win says that it will work "without taking up more than 30 percent of space on the backup disk". Out of a 443Gb drive letter, there is only 33Gb of space left. All done automatically.
8. Is the fact that there is a total of 4 OS's on this computer making the Backups so large? I would assume it is only doing the C: drive, as I would wish, yet something is getting copied over and over, likely. Again, possibility of the latest backup being corrupted is on my mind.
Short of cloning a new disk to replace the later corrupt one, updating it just prior to copying it over, the only other thing I can see doing is to only run the OS on the C: drive, making it easier to replace, yet that has many inherent problems with pgms not working after the OS is replaced, and needing to reinstall anyway.Sorry about the length of this inquiry, but you can see I need assistance.
I don't have a windows seven OS before so I don't know the size of it and all that. I'm going to get a Sager NP5160 soon and I plan to get WINDOWS 7 HOME PREMIUM 64 BIT as 2 partitions on my 320 GB Hard Drive.1. OS partition 2. All the other stuff like programs, files, etc.Can you recommend me a good size ?I plan to use this laptop for 5+ years and no hard drive upgrade!
Considering a self build project : Intel E5700 CPU 2 X 2 Gig Ram 1 TB SATA HDD. What would be the optimum partition size for the Windows 7 Home Premium 64bit OS
i tried to used pc disk clone x to clone my win7 to a smaller hard drive.now for some reason My Computer shows as 381 gig size instead of 682 gighere is a pic tried to make the partition a couple megs smaller to make it realize the actual size and its not working.
I wanna re-size my partition disks. I have C: and D:, I want to shrink C's volume, and extend D's, is it possible without a format? If so, how? (I don't care if it needed a 3rd party program).If I need to do a format to get this done, how to?
I was wondering what's a good size for a Windows 7 pagefile partition? I have Windows 7 installed on my primary drive (OS) and decided to make a 7GB pagefile partition on my secondary drive as I heard it is better to have the pagefile on a different hard drive. I have 6GB of memory installed if it makes any difference.
Is 7GB enough? I noticed the partition already gets filled up so I had to disable that annoying "hard drive disk space is low" balloon notifications that kept popping up.. people are getting away with having no pagefile so I figured 7GB would be more than enough?
I should add that I am not experiencing any blue screens of death or any problems despite the notifications popping up.
The hdd has two patitions named C and D (for recovery).Upgrading from Vista to Window 7, has rendered the 10 GB (partition D) too small. The partition C is 176 GB
I have used computer management in order to increase the c drive. I have used control panel, then system and security then administrative tools then computer management? From there I have shrunk the G drive. I need now to name the unallocated part of this drive in order to copy the files in the new G drives. After that I can increase the size of C drive.
In setting up my wife's computer, I allocated 30 gigs to the C: partition...probably a big mistake. I'd like to increase its size by about 100G, and I have shrunk the D: and E: partitions accordingly, using the Disk Management tool.
Now however I am stuck with two separate blocks of unallocated space, and apparently no way to expand the C: partition into that extra space. Is there any way this can be done within Windows 7 or do I have to seek out some additional software?
back to make my main partition (C: ) where I installed windows only 50gb big. What I wonder is, is it possible to decrease the second partition in size and move that extra size to the main partition without damaging data on both partitions?
I made a mistake when installing Windows 7 on a 150GB hard drive which previously had three partitions.I formatted all three and chose to install the OS to a 75 gb partition.
Everything installed ok but I am 75 GB down on hard disc space.
Is there any simple ways to amalgamate the other 75GB partition to give me back my original size of 150GB?
I am unable to reduce the size of my OS(C) partition to desired size. I've written my recovery disks in case of any problems.
The Shrink C box shows available shrink size is 0. I understand this is because there are unmovable files in the way. One post I saw said to disable system recovery. This is a brand new machine that I want to make dual boot Windows and linux. Want only about 80GB for Windows and 300 for linux. I also saw where someone suggested to use ghost program, then wipe C drive clean and reinstall Windows OS on smaller partition. Sounds drastic.
I think I made a mistake, as when I partitioned my drive after I bought my laptop, I set my Windows partition(C to a much smaller size than usual (30gb). Now I see in the Computer section in win 7 64bit that the drive has like 3 gb of free space. Is that enough for running ? I would like to increase the size of this partition, but with the ordinary way, I can just lower the size, not increase it.
Also, I would like to change the menu and running language to English. Laptop is in German right now, I speak the language, but I`ve gotten used to having my software in English...
I did a new build in Dec last year with Vista Ultimate on a WD 300 GB rapture drive. I partitioned the HD to 60 GB for the "C" drive thinking that I would not install "any" applications on the "C" drive. I would put the apps on the other partitions or another drive altogether. Games on the rapture drive, office productivity apps on another drive.
Apparently, some apps don't give the option to install anywhere else but the C drive. I can accept that but wish I had known that before partitioning.
I also created a "shared" folder on the desktop for moving large files from one networked PC to another. Well it didn't take long before the "C" drive was full. Raw Digital audio files are rather large and attempting to transfer files from one PC to the Vista Ult. PC choked the C drive.
In my next build I'm thinking it may be better to not partition the "C" drive at all. Give the operating system all 300 GB - room to breath for updates, etc.
Does anyone have any words of wisdom, thoughts, comments?
I've had a major crisis this morning using Acronis to reclaim an empty 8gb partition.The hdd from left to right, in disk manager was:8Gb Empty (formerly page file) || D:Data 210Gb Data || R:Recovery 80Gb Recovery Using Acronis I expanded the 210gb to include all the 8Gb so now it would be:D:Data 218Gb || R:Recovery 80Gb Recovery After the re-start, in Computer, it says I have D:Data 8Gb plus 80Gb Recovery.Acronis tells me I have D:Data 218Gb plus 80Gb Recovery Disk Manager tells me I have D:Data 8Gb AND D:Data 218Gb plus 80Gb Recovery.The 140Gb plus of files that where on the original D: when at 210Gb have disappeared.Recuva only recognises D: as 8GB.
I know that acer recovery partition topic was here often but not quite like mineecently my disk broke down and i could not boot up in any way possibleI could not see the disk on linux, and not on windowsI had there very important data so i without thinking used windows 7 rc dvd, i have run chkdsk c: /f to see if i can resurect the diskSo it worked it took me 14 hours to do it but i could log in to windows safe mode and copy all my dataNext step before sending my laptop to waranty would be to try recovery programm but it did not workI tried to do it with alt_F10 but it did not work either, showed me some strange screen with option to choose diskAfter that i used macrium reflect to see what is in the hidden partition and it is filled with 100MB of data, there is no image there
