Windows 7 Hangs On Fresh Install On SSD?
Mar 16, 2011
I'm putting together a HTPC using a ASUS E35M1-I Deluxe (AMD Zacate mobo/cpu combo), 30GB Kingston SSD, and 4Gb Crucial DDR3 1066.Problem is when I boot from the Windows install disk I get the "Windows is Loading Files" status bar but when it gets the end it just hangs there. Usually it boots right into the next Windows loading screen. So before I start troubleshooting I want to make sure there's nothing special I need to do with the SSD before installing Windows. Its a brand new drive but I'm pretty certain during the installation process there's a Format option. The Windows install disk was burned from an ISO using IMG Burn at 16x. Before I left for work I started another burn (with img verification) at 8x. But I'm not certain that will help. I've burned plenty of images at 16x speeds without issue.
View 7 Replies
ADVERTISEMENT
Oct 17, 2012
I recently got a PC that my office was getting rid of. The PC was in great shape and I was told it worked fine when they gave it to me. They ripped out the hard drive and gave me the machine. As soon as I got it, I put a brand new 2Tb Seagate HDD in. I also replaced the existing RAM (2x1Gb sticks) with 2x 2Gb sticks with the memory speed to match my motherboard. Finally I swapped out the ATI Radeon HD2900XT with a Nvidia Geforce GTX 460. There was a sound card (PCI) I removed as well as a redundant firewire port I unhooked from the Mobo. I then booted and peformed a fresh install of Windows 7 32bit Pro. Everything seemed to be going fine... until I tried to shut down. Windows would freeze on the Shutting Down screen. I mean freeze because the spinning circle would stop and the entire machine was unresponsive.
I read online that pre-Service Pack 1 Windows 7 didn't like multi-core processers and would have issues shutting down, so I updated to SP1 (along with a bunch of other updates). Now when I try to shut down, the Shutting Down screen disappears and the signal to the monitor ends, however the machine stays on. I can hear the fans running and see the lights to the PCI cards still on. Once again I have no option but to hold the power button until it shuts down. One extra note I double checked every driver and they are all up to day. Also when I boot in Safe Mode the PC shuts down fine and I have no problem restarting, just shutting down...
View 5 Replies
View Related
Aug 23, 2012
I've spent my whole day trying to figure out what is going on with this to no avail What I've Done: Installed Windows 7 ultimate 64-bit OS on Crucial M4 drive that was acting up and freezing Continued freezing after installing drivers, stable for 10-30mins then freeze, requires hard reset every time updated FW to 000F as recommended, same deal
Specs as follows:
Acer Aspire 8943G
Intel Core i3-350M processor @ 2.26GHz, 3MB L3 cache
ATI Mobility Radeon HD 5650
8GB memory
500GB Western Digital mechanical HDD
128GB Crucial M4 SSD
View 3 Replies
View Related
Aug 30, 2010
I plan on reformatting Windows 7 x64 due to some hardware issues. Basically, I would like to be able to have things like Windows 7 settings, themes, ect imported. Any tips on how to do this? I do have separate partitions/harddrives to backup files, program data, ect.
View 5 Replies
View Related
Oct 29, 2011
A couple months ago i bought my computer, it came with no windows 7 discs. How would i go about putting a fresh install of windows 7 on it?
View 12 Replies
View Related
Mar 19, 2011
So I will be doing a new install of win7 pro x64 on my newly built rig. My questions should i go ahead and do the install and then install SP1 or install, get updates and wait until SP1 is pushed.I have a disk with the full SP1.
View 3 Replies
View Related
Oct 1, 2011
I'm just wondering how to do a fresh install of windows 7, as it keeps freezing lately, ive tried system restore but keeps coming up that it hasn't done it...so id rather re-install from scratch again so ive got nothing on my system...Any help would be appreciated
View 3 Replies
View Related
Mar 12, 2012
I am getting an SSD drive & going to be doing a fresh install of Windows 7. While I understand the process of configuring your system for usage of the drive (unplug the other drives so the SSD is only one connected while installing, turning off prefetch, etc).The part I'm confused with is how to move the users folder so it defaults to the "D" drive. I get I can "Move" the folder, Add the "Location" or do the "robocopy" method & create a junction.
View 1 Replies
View Related
Feb 17, 2013
FInally got an SSD! Now I just need to install it onto an SSD.. could someone give me an explanation on that? My motherboard is the Asrock Z77 Extreme 4. I am currently running Windows 8 (I will update 7 to this later on down again) on a regular hard drive (slow 5400 RPM Samsung HD)
View 2 Replies
View Related
Sep 13, 2012
I've just made a new fresh install of Windows 7 - 64bits (legal version). Everything was fine, all drivers were up to date.But, when I install updates from Windows Update, during the installation of the SP1 (when the screen is "do not turn off the computer"), the computer reboots, and it said that it occurs a BSOD !? I've seen nothing. According to Whocrashed, it's because of BAD_POOL_HEADER, from ntoskrnl.exe (which belongs to Nvidia I think) and e1c62x64.sys (for Intel LAN)... After reboot, Windows continues slowly its updates like everything was OK... but I wonder is that SP1 & updates have been compromised (poorly done, half or what) 'cause of this BSOD? Should I reformat the computer?Windows Update indicates that all these updates were successful...
View 2 Replies
View Related
Jan 10, 2012
I wiped it clean from issues of locking up. I have done 3 fresh installs of Windows 7 Ultimate 64 bit retail using all up to date drivers and everything, I have tried with CPU overclocked and normal clock. When I boot up she runs fine and then when I start listening to music off of my backup drive or browse the internet she will lock up at random, and by lock up I mean it is like im looking at a picture of my screen frozen with no responsiveness whatsoever not even the mouse moving no HDD activity ... nothing! So Ive installed the OS 3 TIMES fresh install new partitions format etc. It does it every time after I let windows update do its thing or just listen to music off the backup drive.pecs are:Windows 7 Ultimate x64 RetailBiostar A780XA2-03 Socket AM2+ MotherboardAMD Athlon 64 X2 3800 CPU4GB Ram - I have swapped sticks that I have had - ( 4 1gb sticks 533mhz)
View 1 Replies
View Related
Feb 18, 2012
This PC has ran fine since 2008 when it was built. It was recently updated to Windows 7 Pro OEM. During the OS upgrade it had more memory added (4x2GB, all slots filled). Upgrade and install went flawlessly. All software (photoshop, premiere, firefox, antivirus) was re-installed without any errors or hick-ups. Upon updating firefox (I believe the timing was co-incidence) it Blue Screened. It has had issues ever since. So my last stitch effort was to back everything up and re-install Windows and hope that it fixed the problem. Needless to say that it hasn't been fixed and it still randomly blue screens. Windows Memory Diagnostic ran with no errors returned
View 3 Replies
View Related
Mar 19, 2012
Bought a new computer 2 weeks ago, came in 3 days ago. Been having trouble with it since. Usually I'm the "Mr. Fix-it" when it comes to PC's but I've never messed around with any debugging tools.
I've tried all the troubleshooting you can possibly do when trying to diagnose a blue screen of death. Tried both RAM sticks separately, took the video card out and used on-board video. I even tried both RAM sticks with on-board video separately. Unplugged the DVD-ROM, no avail. I called ASRock and got a technician who I could barely understand, but was telling me something about "XMP". I didn't see the XMP option under the DRAM configuration, even if my sticks don't support it wouldn't the option still be there? I think he has my motherboard confused with another one. He told me to either replace the RAM with new RAM or send the motherboard back in and exchange it.
I came here to see what the BSoD DMP files REALLY have to say the problem is, so I can solve it once and for all. I didn't pay for new hardware to let it sit here and collect dust.
SPECS: Nothing is OC'd except the GPU, it was OC'd straight from the factory
MOBO: ASRock Z68 Extreme3 Gen3 @ P1.30 (latest BIOS update)
CPU: Intel Core i5 2500 Sandy Bridge @ 3.30ghz
RAM: GSkill RIPJAWS 2x4gb DDR3 1333
GPU: MSI 560 GTX-TI Twin Frozr ii 2gb
PSU: Corsair TX750W
HDD: 1TB Samsung SATAII @ 3gb/sec
DVD-ROM: ASUS SATA DVD-ROM
OS: Windows 7 Ultimate 64bit RETAIL
View 8 Replies
View Related
Nov 25, 2012
Ive ran memtest86 4.0a and i found several million errors. So i scanned through 1 and 1 ramslot to try to determine which ram was giving the errors, this only resulted in 1 of my 4 ram had only 1 error? I found this weird so i thought it might be the DIMM thats corrupted.
So now i removed 3 of my rams and i only run with 1 which passed the test. Still i get unexpected shutdowns aka BSOD.
Ive tried to remove my SSD and only use my HDD back and forth , changing to IDE inside BIOS, but with no good results at all..
Ive also tried to change my PSU to a different brand, but all volts seems ok.
I also reinstalled windows with USB, CD, from HDD yeah you name it, different versions... etc.. i even tried to install Windows 8 but with the same result
This all actually just started out of the blue, i have no clue how but i didnt install anything , all of the sudden i started having connection problems which resulted in BSOD.
View 1 Replies
View Related
Nov 14, 2010
They used to have more of a 'restore disk' but lately I haven't been seeing that anymore. What are users left to do when you need to do a fresh install of Windows? If its for someone else, could I use my windows install disc and use their product key (sticker on bottom)? I've heard that it doesn't always work that way? Does Microsoft have any official documentation about this and if possible, could you share your experiences?
View 6 Replies
View Related
May 2, 2011
A few days ago, all out of the blue, my PC started to freeze - at that time with VISTA installed. I tried to restart and it froze again, just after a couple of minutes. Tried again, again, again and again. With the same result. Without getting any further I tried to install Windows 7 to get my PC up and running again. Formatted all of partitions to get a fresh and clean start. and it froze again, within a couple of minutes. Now I suspect it may be caused by a hardware problem? What is there to do? What can I do? I`m far from a PC-expert, I HP is somewhere between 1-3 years old I think, and I`ve never encountered this problem before, on this PC or any other.
View 9 Replies
View Related
Apr 3, 2012
I installed Windows 7 Home Premium over Vista Business on a PC to see if it would run and tested it out for a few days. I used my installation CD that was good for only one PC. So to activate Win 7 on that 2nd PC I need to buy another copy of the OS. Can I just reinstall over the current version of Windows 7, or so I need to wipe the drive and install fresh?
View 9 Replies
View Related
Jan 13, 2013
Is there any way to do a fresh install without a disk that my key is for? I have a pc with no backup copies of Windows 7 Pro OA that came on it. I only have a Windows 7 Home Prem disk that I bought for my laptop. Is there anyway to make it work? Will my Pro OA key from the site of the box work with the Home Prem disk I have? Or is there somewhere at Microsoft that I can download a copy of Pro OA that I have paid for?
View 4 Replies
View Related
Nov 6, 2011
I have never purchased a laptop before, only built my own systems at home. Before I make my purchase, I have a couple of questions.
Do most laptops come with an OEM Windows 7 disc? I'd like to be able to do a fresh install and wipe all of the junk that will inevitably be pre-installed on the laptop. I've even heard of junk software that is somehow intertwined with the Windows installation that forces the user to update drivers, etc. only through the software itself; sometimes it doesn't even allow the latest drivers. I'd like to avoid all of this and work with the barest possible system and build it up myself.
If Windows 7 discs sometimes do not come, I'm assuming that I will have a valid OEM serial that is tied to a plain copy of Windows 7 (that is, not riddled with laptop software). Would I be able to download a copy off of Microsoft's site and input that serial when I'm prompted?
View 18 Replies
View Related
Dec 22, 2011
I just ordered a P8Z68-V PRO Motherboard w/ Intel Core™ i7-2600K Processor with 2 60GB SSDs (SSD 60G|OCZ SLD3-25SAT3-60G RT). I also have 16GB of RAM (2 X Patriot Viper Xtreme 8GB 2X4GB DDR3 1866MHZ PC3-15000 9-11-9-27 1.65V XMP Ready Desktop Memory Kit)I plan on doing a fresh install of Windows 7 and I need some advice on the best approach. I hear a lot about SSD caching but most of what I read talks about just adding an single SSD to a system that has Windows already running on a spinning disk. If I were to do a fresh install, I would like to make it as fast and stable as possible. The main purpose of this machine if for heavy photoshop and lightroom usage, including filters and image processing. My mobo and processor maybe overkill for these programs but when I spend 10 hours per day in front of the computer, I want it fast! I also wanted the flexibility to move into video editing if I choose. I'm not much of a gamer, so leave that out of the equation for now. I am assuming that both PS and LR will preform better if they are installed on the SSD(s) while the photos themselves are on traditional drives. Here are some of my options:
1. Raid0 - install windows and photo software and over both SSDs. I am assuming the cashing would occur on this drive as well (but I'm not sure how to set it up, or if it happens on default).
2. Raid1 - install windows and photo software on 1 SSD and keep the other as a mirror. I am assuming the cashing would occur on this drive as well (but I'm not sure how). Not sure if the mirror would be a bottleneck.
3. No Raid - install windows and photo software on 1 SSD and use the other for SSD caching.
View 3 Replies
View Related
Apr 10, 2012
i have renctly fitted a new ssd and installed fresh win 7 64 however on two occasion the ystem has halted and turned off due to a bsod
The first bsod details are
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7601.2.1.0.256.1
[Code]...
View 10 Replies
View Related
Jun 18, 2012
I am doing a fesh install of Win 7 from a pre-SP1 DVD.The last time I did this, Windows update dowloaded and installed literally hundreds of patches before and after SP1, taking hours.How can skip to SP1 and avoide downloading all of those unnecessary patches?I am installing to SSD, so in additional to saving time, I also want to minize space
View 7 Replies
View Related
Aug 20, 2012
Yesterday I attempted to install a few new components in my computer and have been having issues installing windows
New components
Asus M5A97 Mobo
AMD Phenom X4 965 3.4 Ghtz
Samsung 830 128gig SSD
In the system I have my previous working
Samsung DVD drive
500v power supply
Radeon HD 6850 graphics card
I do not currently have my 1tb Samsung drive connected I have the SSD hooked up in the first 6b/s SATA port and the DvD drive in port 2.BIOS finds the hard drive and the setting in BIOS are ACHI When I get to the windows setup screen where it asks me to pick the drive to install windows on I choose the SSD which shows 120g unallocated space,At this point I get a Windows cannot create partition error. I have gone into Diskpart and created the partition and set it to active and again tried to reinstall and get the same message?The first is Disk Read Error press cntrl alt del to reset and the second (which I only had happen once) the windows login screen came up, then flashed blue and reset the pc.I built a PC for my brother in law 3 weeks aho using an Asus mobo with the same BIOS screen, that install I had a fresh HDD and a SSD and it allowed me to install windows without a problem to his SSD (again from a burned ISO disk). I did not have to do anything out of the ordinary.
View 25 Replies
View Related
Jan 30, 2013
Can I download the iso from digital river and use my new coa on it? I'm trying to install it on a usb using the win 7 usb tol and I can't get it to accept the disk to iso file.
View 1 Replies
View Related
Feb 1, 2013
Got a virus in my old drive. I bought a new drive and tried to install Windows 7 on it and slave the old drive so to pull files off I wanted, and then format the drive. This did not work. All I get is the Windows blue screen with the dove on it, and no desktop.
View 3 Replies
View Related
Jul 8, 2011
How to install a fresh Windows 7 x64 on an empty harddisk off the dvd with unsigned mass storage drivers ?
View 3 Replies
View Related
Feb 8, 2011
I just purchased Dell Inspiron n4010 laptop without OS.. I am trying to install Windows 7 enterprise edition but every time i get the error
BOOTMGR IS MISSING
Press CTRL.......
I have changed the default boot options to dvd from hard disk...but the error persists I also tried to install Windows XP but the installation halts at a blue screen saying that system is shutting down to avoid any loss...(Code 00X00....)
I then tried to install Free Dos that came alongwith the system but even that is also not installing and error is generated that many of the files are not located on the DVD...
View 6 Replies
View Related
Feb 6, 2010
I was running vista til my had to do a fresh install of windows 7. I had been backing up with nt backup and still have those files. They were under an administrator account. When I attempt to restore them I see the files transfered but am unable to see them in the folder they were transfered to.The size of the file is 50 gigs so I know they are in there but cannot see or acces them. I have changed ownership to the new admin account in 7. tO NO AVAIL
View 3 Replies
View Related
Dec 3, 2012
I just done a fresh clean install of Windows 7 (due to brand new WD Blue 500Gb HDD) on a PB EasyNote TS-13HR, all drivers are the latest from PB's website all Windows 7 updates done and MS Sec Essentials insatlled.It crashes constantly but can then sometimes it'll be fine for hours I suspect a compatibilty issue with HDD, but not to sure really?Below is the debug from memory.dmp - it seems to point at a registry error, which is new (older crash dumps didn't say that!)
[code]...
View 2 Replies
View Related
Aug 2, 2012
I have a new desktop running win 7 64bit pro. After doing a fresh install the only thing I did was remove the trial version of Norton AV. Now many pages will not load in either IE9 or chrome. Some pages load but when you try to click on links. Our other laptops on my network can browse the internet without any problems. Pages that load on them will not load on this new desktop.
The desktop is connect to the network via ethernet cable.
I've been able to download and receive windows updates. I was able to download google chrome. I can get to Google but I when I click on the links the pages will not load, it just sets there and never gives me any error.
View 6 Replies
View Related
Feb 20, 2012
Just reinstalled Windows on a new Samsung PM 830 SSD. Can't tell if its the SSD or the other things that I have installed. Sometimes it gives the BSOD screen, sometimes Explorer just goes missing and Task Manager would be unavailable. These days the BSODs come more often and with little warning.
View 3 Replies
View Related
