Should Fresh Install And Choose GPT Format
Mar 30, 2012
My 3TB drive is only showing up as 1.99TB... I remember, but don't quote me when I was installing this Win 7 Ultimate (GENUINE) disc to my comp, it said something like "Windows cannot use over 2TB" or something..I can go into disk partition and try to extend it but this happens.Also another thing I'm noticing is that the total (2048GB+700ish GB does not = 3000GB... It's labled on the drive itself "3000GB"..Is that just the comp. using it to know it's there? (I know that sounds idiotic.)So I'd love some help, and if need be I can format my drive in a heartbeat.So your saying I should fresh install and choose GPT format? I honestly have NO! problems doing that if it needs to be done.
View 13 Replies
ADVERTISEMENT
Jul 2, 2012
I just formatted my C-Drive and installed a fresh copy of windows 7 ultimate on it. After restart, I got the following screen - See image attached. Now Windows can't boot at all. I tried using a system repair disk but it doesn't work. I doubt if it is a hardware problem, since I can access the boot menu and its options, but as I said, running the repair disk fails, I keep on getting that screen when it restarts.
View 4 Replies
View Related
Aug 8, 2010
I had bought new laptop. At that I have two drives and I locked one of them with the bitlocker and later on I just deleted that drive from disk management. Now I cannot create partition, I have more than 160 GB and system does not allow me to install a fresh copy and neither it allows me create a partition. What should I do?
View 3 Replies
View Related
Oct 6, 2012
I am putting together my own computer and am putting in a 1TB HDD and 120GB SSD. Seems as I cannot get a definitive understanding of whether or not I need to format and partition each of these drives. I want to install Windows 7 on the SSD and use the HDD for other programs and data. So do I format and not format each of these drives?
View 5 Replies
View Related
Jul 2, 2012
I know there is a setting to choose or not to choose specific countries, but I don't know how.(Yes, Europe is not as free as you think and you need to change your identity to view what third world countries can view!)
View 2 Replies
View Related
Dec 22, 2010
I'm doing a clean install on my computer, and it's going alright until it asks me to choose which hard drive I want to install Windows 7 on. Apparently I have 2: a C drive and a D(Recovery) drive.What should I do in this situation? Should I just install on the C drive, or should I do what it says here: Partition the Hard Drive in a Windows 7 Install and delete the partitions and create a new one.
View 7 Replies
View Related
Aug 30, 2010
I plan on reformatting Windows 7 x64 due to some hardware issues. Basically, I would like to be able to have things like Windows 7 settings, themes, ect imported. Any tips on how to do this? I do have separate partitions/harddrives to backup files, program data, ect.
View 5 Replies
View Related
Nov 5, 2009
My work machine's HDD is on its way out. It currently has XP Pro x86 on it. I got a fresh new HDD and upgrade version of Win7 x64 Pro.
I booted from the Win7 x64 disc, it went through its whole install thing on the new HDD, and then when it got to the product key, it wouldn't accept the one that came in the box. I read on the web that upgrade versions must have XP or Vista already installed for it to work.
But, the 7 documentation says I have to do a Custom install if I'm upgrading from XP. A custom installation deletes whatever is on the partition, I think. So how can it work when upgrading from XP?
I have actually gone back and installed XP on the new HDD (that had its own share of problems, couldn't even get the internet connection working), and now trying to do a custom installation of 7 again. When it gets to the product key section, should I put in my original XP product key? Or will the 7 product key work this time?
View 8 Replies
View Related
Oct 29, 2011
A couple months ago i bought my computer, it came with no windows 7 discs. How would i go about putting a fresh install of windows 7 on it?
View 12 Replies
View Related
Mar 19, 2011
So I will be doing a new install of win7 pro x64 on my newly built rig. My questions should i go ahead and do the install and then install SP1 or install, get updates and wait until SP1 is pushed.I have a disk with the full SP1.
View 3 Replies
View Related
Mar 20, 2012
I have been getting bsods recently at first it was only when trying to play BF3 i couldnt play for more than 5 min before bsod. now its moving its way into normal functions.i will include a dx diag and cpu z .txt file Here are the reports from the time frame i recieved the bsod. Iwill also include the one i got last night before i gave up.Let me know if there is anything else I should include
Log Name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 3/20/2012 4:21:37 PM
Event ID: 1001
Task Category: None
[code]....
View 14 Replies
View Related
Dec 22, 2011
I had a lot of trouble with blue screens on this system (as per profile) with a previous installation too, but never got round to dealing with it properly. So now, it's a less than week old installation that I've put very few things on yet, but crashes a *lot* when I try to run games. Does blue screen outside of this, just not as much.
The error codes vary, but most common is IRQL_LESS_OR_NOT_EQUAL.
View 9 Replies
View Related
Sep 30, 2010
installing Windows 7 ultimate upgrade version on fresh install with new hardware right now. i will b checking this every few min.
View 9 Replies
View Related
Oct 1, 2011
I'm just wondering how to do a fresh install of windows 7, as it keeps freezing lately, ive tried system restore but keeps coming up that it hasn't done it...so id rather re-install from scratch again so ive got nothing on my system...Any help would be appreciated
View 3 Replies
View Related
Mar 12, 2012
I am getting an SSD drive & going to be doing a fresh install of Windows 7. While I understand the process of configuring your system for usage of the drive (unplug the other drives so the SSD is only one connected while installing, turning off prefetch, etc).The part I'm confused with is how to move the users folder so it defaults to the "D" drive. I get I can "Move" the folder, Add the "Location" or do the "robocopy" method & create a junction.
View 1 Replies
View Related
Dec 1, 2012
A new Samsung 840 pro SSD is on it's way with the courier and I will remove my present OCZ and will install a fresh Windows 7 pro. At present I have the SSD divided in 2 partitions C:system and D:Programs my first question regards the opportunity to keep the 2 partitions: is it good or bad for the SSD?
1) make an iso of partition D:programs
2) remove OCZ econnect the Samsung SSD
3) Check Uefi bios if AHCI is marked
4) Install 7 on C: (automatic alignment od the SSD)
5) Create partition D:
??Optimize?? Is it better to do it at this stage? Or after having installed various programs? I think at this stage but would appreciate your suggestions including what sort of optimization is advisable. I could eventually use RT7.Then I would copy from the iso all the programs on their own place D: and from the various distribution files will make the various setup (just for the programs to be registered in the Registry)
View 1 Replies
View Related
Feb 17, 2013
FInally got an SSD! Now I just need to install it onto an SSD.. could someone give me an explanation on that? My motherboard is the Asrock Z77 Extreme 4. I am currently running Windows 8 (I will update 7 to this later on down again) on a regular hard drive (slow 5400 RPM Samsung HD)
View 2 Replies
View Related
Sep 13, 2012
I've just made a new fresh install of Windows 7 - 64bits (legal version). Everything was fine, all drivers were up to date.But, when I install updates from Windows Update, during the installation of the SP1 (when the screen is "do not turn off the computer"), the computer reboots, and it said that it occurs a BSOD !? I've seen nothing. According to Whocrashed, it's because of BAD_POOL_HEADER, from ntoskrnl.exe (which belongs to Nvidia I think) and e1c62x64.sys (for Intel LAN)... After reboot, Windows continues slowly its updates like everything was OK... but I wonder is that SP1 & updates have been compromised (poorly done, half or what) 'cause of this BSOD? Should I reformat the computer?Windows Update indicates that all these updates were successful...
View 2 Replies
View Related
Jul 3, 2012
After reading other posts I ran miniToolBoxThis is really annoying as it is a brand new PC[CODE]
View 4 Replies
View Related
Jan 10, 2012
I wiped it clean from issues of locking up. I have done 3 fresh installs of Windows 7 Ultimate 64 bit retail using all up to date drivers and everything, I have tried with CPU overclocked and normal clock. When I boot up she runs fine and then when I start listening to music off of my backup drive or browse the internet she will lock up at random, and by lock up I mean it is like im looking at a picture of my screen frozen with no responsiveness whatsoever not even the mouse moving no HDD activity ... nothing! So Ive installed the OS 3 TIMES fresh install new partitions format etc. It does it every time after I let windows update do its thing or just listen to music off the backup drive.pecs are:Windows 7 Ultimate x64 RetailBiostar A780XA2-03 Socket AM2+ MotherboardAMD Athlon 64 X2 3800 CPU4GB Ram - I have swapped sticks that I have had - ( 4 1gb sticks 533mhz)
View 1 Replies
View Related
Feb 13, 2012
my computer is about 2 years old. It first came with Windows vista 64. A few months ago I got a hold of a copy of windows 7 pro 32, so I wanted to check it out, even If I was going to take a hit on ram. Well now I have Windows 7 Ultimate 64, but after doing a fresh install I kept getting BSOD after the windows logo. I was able to complete the setup after removing all my ram except for one stick. The same problem persists after setup. I can boot up in safe mode just fine with all of my ram.
[code]...
View 1 Replies
View Related
Feb 18, 2012
This PC has ran fine since 2008 when it was built. It was recently updated to Windows 7 Pro OEM. During the OS upgrade it had more memory added (4x2GB, all slots filled). Upgrade and install went flawlessly. All software (photoshop, premiere, firefox, antivirus) was re-installed without any errors or hick-ups. Upon updating firefox (I believe the timing was co-incidence) it Blue Screened. It has had issues ever since. So my last stitch effort was to back everything up and re-install Windows and hope that it fixed the problem. Needless to say that it hasn't been fixed and it still randomly blue screens. Windows Memory Diagnostic ran with no errors returned
View 3 Replies
View Related
Mar 19, 2012
Bought a new computer 2 weeks ago, came in 3 days ago. Been having trouble with it since. Usually I'm the "Mr. Fix-it" when it comes to PC's but I've never messed around with any debugging tools.
I've tried all the troubleshooting you can possibly do when trying to diagnose a blue screen of death. Tried both RAM sticks separately, took the video card out and used on-board video. I even tried both RAM sticks with on-board video separately. Unplugged the DVD-ROM, no avail. I called ASRock and got a technician who I could barely understand, but was telling me something about "XMP". I didn't see the XMP option under the DRAM configuration, even if my sticks don't support it wouldn't the option still be there? I think he has my motherboard confused with another one. He told me to either replace the RAM with new RAM or send the motherboard back in and exchange it.
I came here to see what the BSoD DMP files REALLY have to say the problem is, so I can solve it once and for all. I didn't pay for new hardware to let it sit here and collect dust.
SPECS: Nothing is OC'd except the GPU, it was OC'd straight from the factory
MOBO: ASRock Z68 Extreme3 Gen3 @ P1.30 (latest BIOS update)
CPU: Intel Core i5 2500 Sandy Bridge @ 3.30ghz
RAM: GSkill RIPJAWS 2x4gb DDR3 1333
GPU: MSI 560 GTX-TI Twin Frozr ii 2gb
PSU: Corsair TX750W
HDD: 1TB Samsung SATAII @ 3gb/sec
DVD-ROM: ASUS SATA DVD-ROM
OS: Windows 7 Ultimate 64bit RETAIL
View 8 Replies
View Related
Nov 25, 2012
Ive ran memtest86 4.0a and i found several million errors. So i scanned through 1 and 1 ramslot to try to determine which ram was giving the errors, this only resulted in 1 of my 4 ram had only 1 error? I found this weird so i thought it might be the DIMM thats corrupted.
So now i removed 3 of my rams and i only run with 1 which passed the test. Still i get unexpected shutdowns aka BSOD.
Ive tried to remove my SSD and only use my HDD back and forth , changing to IDE inside BIOS, but with no good results at all..
Ive also tried to change my PSU to a different brand, but all volts seems ok.
I also reinstalled windows with USB, CD, from HDD yeah you name it, different versions... etc.. i even tried to install Windows 8 but with the same result
This all actually just started out of the blue, i have no clue how but i didnt install anything , all of the sudden i started having connection problems which resulted in BSOD.
View 1 Replies
View Related
Sep 24, 2012
I installed Windows 7 64-bit on my Dell XPS l501x and managed to find most of the drivers, but still have a couple of annoying little issues. Windows no longer tells me when my battery is nearly dead, it just dies when it's empty. Before the full restore I would be warned twice and then it would hibernate to give me a chance to find a plug. I still have one Unknown Device in device manager and I have no idea what it could possibly be as things generally seem to be running smoothly.Is there any way I can find out what this is?
View 5 Replies
View Related
Oct 13, 2010
So my XPS caught fire and my mom gave me her old computer as she got a new one.i threw some good parts from my XPS into this Dimention 8400 so it has better specs to run windows 7.3GB of ram and my X800XT radeon videocard and the 3.0GHz HT 64 bit processorNow i installed windows 7 32 bit ultimate from my XPS and it takes 20 seconds to get to the logon screen, but after that once you log in the "Loading" screen takes 3-6 mins along with once the desktop shows up it takes another 5 mins or so to even press the start button and bring the start menu up, 45 seconds to 2 mins to bring the internet up and this is a FRESH install, as of like....20 mins from this post it finished installing. not even activated yet
View 9 Replies
View Related
Nov 14, 2010
They used to have more of a 'restore disk' but lately I haven't been seeing that anymore. What are users left to do when you need to do a fresh install of Windows? If its for someone else, could I use my windows install disc and use their product key (sticker on bottom)? I've heard that it doesn't always work that way? Does Microsoft have any official documentation about this and if possible, could you share your experiences?
View 6 Replies
View Related
Mar 16, 2011
I'm putting together a HTPC using a ASUS E35M1-I Deluxe (AMD Zacate mobo/cpu combo), 30GB Kingston SSD, and 4Gb Crucial DDR3 1066.Problem is when I boot from the Windows install disk I get the "Windows is Loading Files" status bar but when it gets the end it just hangs there. Usually it boots right into the next Windows loading screen. So before I start troubleshooting I want to make sure there's nothing special I need to do with the SSD before installing Windows. Its a brand new drive but I'm pretty certain during the installation process there's a Format option. The Windows install disk was burned from an ISO using IMG Burn at 16x. Before I left for work I started another burn (with img verification) at 8x. But I'm not certain that will help. I've burned plenty of images at 16x speeds without issue.
View 7 Replies
View Related
May 2, 2011
A few days ago, all out of the blue, my PC started to freeze - at that time with VISTA installed. I tried to restart and it froze again, just after a couple of minutes. Tried again, again, again and again. With the same result. Without getting any further I tried to install Windows 7 to get my PC up and running again. Formatted all of partitions to get a fresh and clean start. and it froze again, within a couple of minutes. Now I suspect it may be caused by a hardware problem? What is there to do? What can I do? I`m far from a PC-expert, I HP is somewhere between 1-3 years old I think, and I`ve never encountered this problem before, on this PC or any other.
View 9 Replies
View Related
Apr 3, 2012
I installed Windows 7 Home Premium over Vista Business on a PC to see if it would run and tested it out for a few days. I used my installation CD that was good for only one PC. So to activate Win 7 on that 2nd PC I need to buy another copy of the OS. Can I just reinstall over the current version of Windows 7, or so I need to wipe the drive and install fresh?
View 9 Replies
View Related
Jun 22, 2012
Currently have Windows 7 installed on one of my HDDs and the other has all my media, can/how would I move my favorite programs over? My intentions are to move the programs I don't want to lose/reinstall to the media drive temporarily, then install windows on the SSD and finally wipe the current system/program drive and just put the programs that don't need to be on the SSD.
View 2 Replies
View Related
