Mastered File Disc Format?
Nov 23, 2012Which disc format does Windows 7 Mastered file system use when burning a disc? ISO 9660, Joliet, UDF?
View 3 RepliesWhich disc format does Windows 7 Mastered file system use when burning a disc? ISO 9660, Joliet, UDF?
View 3 RepliesI went to the "recording" tab in my DVD burner's properties, changed the drive from C to D. Now there's a folder called "Windows Burn Temp Files" in my D drive. But the problem is, while burning, files are still being copied over to C in a temporary folder there. Shouldn't it be copying to D:Windows Burn Temp Files instead? Example, when I cut paste some files from D drive on to the DVD drive before burning, it should be instantaneous, as the temporary files should also be shored in the same drive, D. But this is not happening.
View 2 Replies View RelatedI cannot seem to get this DVD-R to even come up when I insert it in order to format it.
View 1 Replies View RelatedLast night I managed to copy some photographs onto a CD- R disc and they played on the TV through a DVD player. This evening I attempted to load some photographs onto some discs which came with no marking on them so they must have been cheap. The outer cover of the discs said,DVD-R and when I attempted to start to use them a message which I set out below came up saying the disc needed formatting. I looked up how to format a disc and I followed the instructions as far as I could which I set out below.
1. Insert a disc into your computer's CD or DVD drive. I did that.
2. In the dialog box that appears, click Burn files to disc. That did come up.
3. In the Burn a disc dialog box, type a name for your new disc. I did that.
Another box came up asking. How do you want to use this disc? Like a USB flash drive. With a CD/DVD player and I clicked onto the With a CD/DVD player.I then clicked onto next.A large empty box with nothing in it came up and a small block came up saying. Windows can't read the disc in drive D: Make sure that the disc uses a format that Windows recognizes. If the disc is unformatted, you need to format it before using it.From then on in I was stuffed because there were no formatting options to be seen. Any suggestions will be welcome although the thought crossed my mind that pherhaps I need to buy some CD-R discs but I thought I should use DVD discs.
Can I format a hard drive that has windows 7 with a Win95 disc to get prompt to format 'c or d'
View 8 Replies View Relatedwindow unable to format disc
View 2 Replies View RelatedI bought a HP Laptop with Windows 7 Home Premium pre-installed. I got rid of any bloatware and as I'm typing this, Macrium is imaging my C drive to a network drive. Now my question is, would I be able to completely format the computer, set up my own partitions and install Windows on one of them? Preferably a fresh and clean version but I wouldn't mind the bloatware one either. Things to consider, I don't have a disk-drive so it'd have to be done with a thumbdrive; I have not been able to find the actual O/S product key, if someone could tell me where to locate it.
View 4 Replies View RelatedIs it possible to use the upgrade disc to format C drive (it has the Windows 7 RC activated, I can also reinstall Windows Vista if I have to), and do a clean install?
View 8 Replies View RelatedHow do i format a disc to' mastered' using windows 7
View 1 Replies View RelatedMy son is running Windows 7 Pro on a sad little 1 Gb RAM PC 3.4 GHz and of course it is somewhat underpowered and the PC is badly in need of a formatiing anyway..Problem is I can't get to a Format command anywhere??????I can get into BIOS OK, set the DVD as first boot option but when I save it (F10) and then it reboots, the screen always comes up with the "Start Windows Normally" option! I can reach the "boot from any CD/DVD option but for some weird option the arrows on the keyboard will not alow me to move away from this latter choice yet the board works fins with everything else.I can't get it to boot from the original Win 7 CD, Windows Vista or even Pro OS's ................ so of course again cannot get to the format command.I have created a System Recovery Disc but I am not 110% sure how to use this disc but nonetheless cannot seem to find an option for formatting there anyway.
View 2 Replies View RelatedMy laptop suddenly decided to not run, it gets to "starting windows" but will not go any further. I`ve tried to boot from the OS disc to do a repair but it still goes to "starting windows". If i select "repair computer" at start up without the OS disc it stays at that window and will not go any further, I can`t even get an option when booting from OS disc to format and reload windows. The HDD is spinning so i know it`s getting power. I can run Linux live cd so i`m presuming it`s probably the HDD is fried even though it`s spinning. I even took ouit nthe HDD and connected it to my desktop but the desktop wouldn`t recognise it.
View 8 Replies View RelatedHow do I format my toshiba laptop legally without a Windows 7 disc?
My dealer refuses to format my computer without charging me a robbery of $60.
FORMATING my C drive and how to reinstall windows 7 again with the help of recovery disc.
my computer was formated and windows were reinstalled but it was not done by me. I have the recovery discs provided by the hp laptop company.
i have windows 7 home premium 64 bit.My device is HP DV6 6121tx
w7 i can format delete en cut file from any external drive or disc?
View 1 Replies View RelatedI have an HP G62 laptop which came pre-installed with Windows 7. I would like to fully remove all data on the HDD and reinstall Windows 7.The 'Computer' section of the Start button shows the following HDD (not sure if these are partitions or not, but I'm assuming that they are!):
Local Disk ( C: )
Recovery ( D: )
HP_TOOLS ( F: )
I had a quick look at the D: drive and it showed a few setup files, all of which seem to be related to MSOFFICE. :-?I have been reading about data destruction programs that will absolutely wipe the drive and remove all data; I would like to do this and then reinstall Windows 7 so that the laptop effectively becomes a 'new' one.
1. How do I go about formatting the HDD with a data destruction program and then reinstall Win 7, since I do not have a bootable disc?
2. How reliable are such data destruction programs? Is there any margin of error? (I am a bit concerned about all the sensitive information that I have saved on my laptop such as bank details, family photos, etc.)
i am planning to install windows 7 very soon but am worried that while installing windows 7,vista will be completely formatted if doing a fresh installation in-case if i don't like it, can i re-install vista using the recovery disc?my pc came with vista installed on it so i dont have a guniene DVD for vista.
View 2 Replies View RelatedIs there a way I can remove all the partitions from my Hard drive and do a full format (not quick)? The windows 7 install disc does a quick format but I would like to clean it thoroughly. Is there a utility I can use at boot time to do this?
View 4 Replies View Relatedi installed K-Lite Mega Codec Pack v4.5 64bit and Windows 7 Codec Pack v2.8.0 but when i play file no sound.
View 4 Replies View RelatedI have an old Xbox 360 HD DVD drive and a few HD DVD movies. Is it possible to convert them to Blu-ray Discs/video files?
View 3 Replies View RelatedHow to Burn a Disc Image from a ISO or IMF file in Windows 7 ?
View 0 Replies View RelatedCan I replace the file from an install disc?
View 1 Replies View Relatedafter working on a video project in Windows DVD maker,,,,after saving,,,,the file is saved as a PROJECT with the (.MSDVD) extention ! Meaning,,i can't watch it anywhere else except on the Win DVD Maker ! However, i am already done with it and want it to have a regular file extention for use anywhere else !
View 2 Replies View RelatedI have downloaded various video clips from different websites and would like to copy or burn then to blank DVD's. However, I am not that good with computers and don't exactly know how. I have a DVD burning software which I have taken my own personal DVDs and made a copy of them (which is not illegal by the way, I made sure and checked that). But I don't know how to do the same with various video files I have downloaded from the internet or that friends have emailed to me. Some of the files types include AVI, and MKV file types, others I cant find out what kind of file it is. I can play these on my computer and watch them, but I would like to maybe compile the video files and put hard copies of them on DVDs.
View 7 Replies View Relatedhow do i format my pc using window 7,without deleting files?
View 6 Replies View RelatedI downloaded a book----"Murray medical microbiology 320320.pdb" from a site called filecrop.But I dont know how to open a .pdb file or which software can open it in windows 7.Is there any converter?
View 2 Replies View RelatedI have an *.iso file on my hard disc.What is the easiest was to map this �.iso file to a (free) driver letter (e.g. M ?I don't want to burn it on a DVD and access it in my DVD drive? Is there a Win7 built-in way?
View 3 Replies View RelatedSo I bought this like a year ago and only had the basic Medieval installed (Without kingdoms) I got into it again and wanted to play it with kingdoms so I deleted Medieval and tried reinstalling it again. Im not good with computers at all but I have Windows 7 and I played it on this computer before and I have a good computer so I know it's compatible.I put the Cd in and click the green launch Icon and the main menu comes up. I click install then it comes up with the four total wars and I check all of them and click next, and then when I get to the next page it asks me to put in disc 2 and select where I would like to install it. I put in the Cd and then pick where to install it (Default is the CD it is being installed from) I have tried my C drive and my external drive but neither works. A error message pops up and says Setup could not find a file or the specified path or disc. Please check that the proper disk is insert or specify new path.
View 1 Replies View RelatedHow do I do this? I'm curious so that I can buy and download windows 7 to run bootcamp instead of having to go to the store.
View 9 Replies View RelatedI have been recording tv to external hard drive from my OKANO tv and in my laptop they come up as an SQ file. How can I convert that file into something I can put on disc and play in dvd players? I have windows 7.
View 1 Replies View Relatedhow do i burn dvd files to play on all portable dvd players?
View 1 Replies View Relatedwhile i am copying files from my hard disc to my pc, it is showing "can't read from the source file or disc.
View 3 Replies View Related