How To Map An *.iso File On Hard Disc To A Drive Letter M:
Jan 26, 2011
I have an *.iso file on my hard disc.What is the easiest was to map this �.iso file to a (free) driver letter (e.g. M ?I don't want to burn it on a DVD and access it in my DVD drive? Is there a Win7 built-in way?
View 3 Replies
ADVERTISEMENT
Nov 16, 2009
I lost my Event Viewer, and had to do a repair installation to fix it. Unfortunately, during the repair install, Windows decided to rename my second HD as the D: drive... it was K: before that. Now I cannot access any of my docs, pictures, music, or videos through the normal means... they don't show up in libraries or explorer, and apps like Restorator and Sure Thing (CD labeler) cannot find them. I think that means the paths are broken..?
It won't allow me to rename the HD back into K: (it's not listed as available). I can access the data by clicking Computer > D, and I can see the data is there, but its unusable as of now. Any ideas?
View 8 Replies
View Related
Jun 17, 2011
I just formatted and installed afresh Win7 Ultimate N on a WD1000GB. Since setup screen it recognized only 3 of 5 disk drive (all of same HDD).Before that I resized two of the drives with `EASEUS Partition Master 8.0.1 Home Edition` but I did so for the drives he actually recognized. (I accessed those drives through another OS which is installed on another HDD).It would see them in disc management but it can`t assign drive letter, it says : Disk Management Console view is not up-to-date... even the program can`t assign letter ot mess with the size of the drives
View 6 Replies
View Related
Aug 21, 2012
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies
View Related
Dec 5, 2009
I have a second internal hard drive with data. Currently it is the slave. I have tried cable select with the same result. Disk management sees the drive but I cant assign it a letter. All options under Task -> All options are greyed out except delete volume. How do I give it a letter so I can access the data?.
View 4 Replies
View Related
Dec 28, 2012
I have built a computer for video editing and named the hard drives (C for the main drive, (M for the drive holding my music, (P for the drive for photos, and I named the drive to store my videos (V. However when I tried to write path to the V: drive I was told V: is an invalid path, I suppose because of the confusion with a followed by a / which would give you a / which can be confused with V but is not exactly the same. I went to My Computer and right clicked on the V: drive and clicked on "rename" in the drop down menu and changed the name to "Storage" but the (V persisted. Then I renamed again and named the drive "Storage (S" and now in "My Computer" the drive is shown as "Storage (S (V" When writing a path to put videos on this drive can I use either S:/ or V:/ to get videos into this drive? Is there some way to remove the (V
View 2 Replies
View Related
Oct 9, 2011
In order to download the Diablo 3 Beta to my hard drive, I had to change its letter from B to E (D3 doesn't allow hard drives named A or B... sigh). When I finished downloading D3, I switched the name back to B, and now all of my desktop and start menu icons have been replaced with the white icon you get when the path is unknown (yet all of the shortcuts still work when clicked on). When I would go into the properties menu, I tried to "change" the icons back to their normal ones, but it wouldn't work (changing them to any of the standard Windows icons worked, but trying to change them back to their default ones wouldn't go). Any thoughts? It's really frustrating.
View 2 Replies
View Related
Dec 25, 2009
Yesterday night I finally got the time around to finish the fresh installation of Windows 7, and I created a hard link for both my "Program Files" and "Program Files (x86)" using the command prompt in the Windows 7 installation disk.
The hard link points to another partition(E:) which I use to store Program Files purely. However, at the time of creating the hard link using the Windows 7 Installation disc, the volume letters were different than what it was in Windows. Now when I tried to access my files from Windows, it would give me an error. To better illustrate the problem,
The image above shows the hard link in (C:) and the volume which I link to (E:)
The image above shows the hard link and the directory it links to in E:. Notice that the Internet Explorer 8 on taskbar is no longer available. On the other hand, when I tried to install Firefox on "C:Program Files (x86)", it would be put in "C:ProgramData" which appears to be a new backup system that Microsoft used in case "Program Files" folder was deleted.
I know I'm in for another re-install, but what should I do to make the hard links work properly?
View 2 Replies
View Related
May 26, 2012
I formatted and installed windows 7 64 bit in a pc which previously had windows 7 32 bit. When i booted my 1tb dynamic disk was not detected. So I went into disk management and it had listed my disk as "Foreign Disk". So i imported the foreign disk.
The drive was detected and opened. So i rebooted the pc but now the drive is still not appearing in my computer. When i go to disk management the 1tb appears but there is no drive letter assigned. When i try to assign drive letter it statest that "Specified File cannot be found"
View 1 Replies
View Related
Jan 3, 2012
i cant copy the files to USB !! It show the hard disk is write Protected!! What Should i do!
View 1 Replies
View Related
Aug 18, 2012
I am trying to access my BIOS,cannot use f8 or any f to access,cannot load from my original disc yet it loads when the hard drive is not installed?
View 8 Replies
View Related
Oct 11, 2012
My Acer netbook has developed some kind of fault and I am unsure as to what I ought to do. The netbook does boot to BIOS and also will boot up from an external drive...but will not boot normally. I am thinking of replacing the hard drive but don't know if there could be something else wrong. It says sometimes that it can't read it and from this I am not sure if there is something else wrong. If I change the drive does it sound as though things will work? There are also a couple of other intermittent faults such as certain letters and numbers not working and then everything is fine for a while...
View 4 Replies
View Related
Dec 30, 2012
i have been on various forums for advice but unable to solve - this is the problem -
* it turns on & I CAN get into advanced menus
* it will not repair itself no matter what
* it will not go into any other modes , safe Etc....therefore I cannot restore to factory settings etc....
* ive Tried all tricks such as F8, Alt & F11 etc..... to get into advanced menu settings - all lead to the black screen
* everything i click on enter leads to a black screen - only a white curser appears.
its as if there is no way of accessing the computer disc/ hard drive in anyway from boot up. there is clearly a hardware problem but i cannot access anything internal beyond ordinary & advanced menus i just keep being led to the black screen & no activity. the menus work & that is all. i run Windows 7 on a Dell inspiron 1564.
View 9 Replies
View Related
Jul 9, 2012
I want to format and 0 write and wipe the entire hard drive in an Asus EEEPC with no system disc and re-install windows 7 home premium. The windows registration number is on the back of the computer.
Did not come with a windows disc or recovery disc from the factory, IE windows 7 home pro was pre-installed.
I created a system recover boot disc/CD. This machine has no CD/DVD drive, but I do have a USB CD/DVD drive.
If I format and write the drive, but leave the partitions will I be able to re-install this version of windows that came with the machine ??
View 8 Replies
View Related
Oct 20, 2009
Is there a way I can remove all the partitions from my Hard drive and do a full format (not quick)? The windows 7 install disc does a quick format but I would like to clean it thoroughly. Is there a utility I can use at boot time to do this?
View 4 Replies
View Related
Apr 9, 2011
I am trying to clean up my second internal hard drive in my desktop in which I just upgraded the OS to Windows 7. My second hard drive (D) was the one that I think I had XP on before I upgraded to Windows 7. I installed Windows 7 on the 1st hard drive (C). So at this point I just want (D) to be as clean, empty as possible. But in trying to delete many of the files, it gets to the point where it says Admin approval required. I cant get past that part. I need help with this please. I dont care if I erase the whole hard drive, just want it cleaned up.
View 4 Replies
View Related
Apr 12, 2011
My old computer was put to rest with a big power surge last week. I had to buy a new computer and now I would like to access my old files. I have taken the hard drive out of my old PC. My new PC of course has windows 7. I am not a computer expert but I am not a novice either. The old hard drive has the sata connection and I have a sata cable, but have never used one previously. I connected the cable to the old hard drive and then plugged in the power cord to the wall outlet. I then I connected the USB cable from the sata cable connected to my old drive to my new PC�s USB port. I haven't been able to access the files on the old drive but I know my new pc has recognized the hardware. After I connected the USB cable to my new pc under Devices I can see a hardware named USB to ATA/ATAPI Bridge. Not sure what that means. There is �No� drive listed for it though when I open Windows Explorer. I can only see the (OS) C drive and the HP Recovery D drive.
View 4 Replies
View Related
Feb 17, 2013
So, i woke up the other day to see my Windows 7 computer is now completely screwed up that i am on right now..C drive is Mirror RAIDed to let you know.It is reporting 74.1MB free of 465GB total on the drive.No matter what i delete, it does NOT EVER free up space.As a matter of fact, some files delete, then come right back, files i've added myself.. weird #1Two, i run chkdsk in windows, it says C drive is a RAW drive and cant scan however it boots up fine to it every time. weird #2So i then use windows repair command prompt to chkdsk /F /R It sees it's NTFS JUST FINE..but reports ZERO errors.. weird #3I scan using Intel Matrix Storage Console in windows, NO ERRORS, weird #4But i am getting Disk I/O errors like crazy in windows logs and in programs, etc.. weird #5I selected all files on Disk C- total space in use under 300gb, but showing 465GB in use.. weird #6Scanned for infections with AVG, no errors, i tried malwarebytes, will not open- 0xc000005. weird #7So i have a drive that can't be read but is read but reporting wrong size but measures right size that has no errors but has errors.
View 5 Replies
View Related
Sep 1, 2011
I took my old desktop HD out and hooked it upto my new Windows 7. teen when I try to even open my 2003 Word Reeume doc it says "Word can not open the document; user does not have access priviliges" It's my resume and all i want to do is copy it to my new comp.
View 4 Replies
View Related
Jan 10, 2011
My old hard drive sounds like it is about to die. So I am wondering, once I install my new HD (format and install windows) will it be possible to hook up my old HD and transfer the files from it to the new HD? I am using Windows 7 and both drives would be SATA.
View 5 Replies
View Related
Jul 10, 2012
I have laptop with one of the windows OS on it and want to transferr OS and all the file to it,problem is i do not have the cd or product key, so i may be able to transfer all the file but how can i transfer the OS and have never paritioned a hard drive either. i have seen the r alot of gatgets out their and on ebay thay sys all u have to do is plug it in to the laptops usb , and plug the new hard drive to the cloner and just transfer all files,, but it says nothing about transferring the OS or MS office 2010 or any thing with product codes so is the any product on the market to transfer everything to new hard drive same speed just from 89GB to 350GB,
View 5 Replies
View Related
Jul 10, 2012
I have laptop with one of the windows OS on it and want to transferr OS and all the file to it,problem is i do not have the cd or product key, so i may be able to transfer all the file but how can i transfer the OS and have never paritioned a hard drive either. i have seen the r alot of gatgets out their and on ebay thay sys all u have to do is plug it in to the laptops usb , and plug the new hard drive to the cloner and just transfer all files,, but it says nothing about transferring the OS or MS office 2010 or any thing with product codes so is the any product on the market to transfer everything to new hard drive same speed just from 89GB to 350GB
View 3 Replies
View Related
Apr 25, 2011
I have Win 7 home premium on an HP laptop with 4 usb ports. I have 2 Western Digital Elements 1.5 TB drives for backups. If I plug in one of the drives, Win assigns a drive letter, but if I add the second one it doesn't.
To troubleshoot, I've plugged each drive into every usb port on the laptop, and each port reads each drive alone, but if I plug in the second drive while the first is still in, it shoes up in devices but does not get a drive letter. I tried assigning a different drive letter to the device plugged in first, but Win still doesn't assign a letter to the second drive.
View 1 Replies
View Related
Oct 12, 2012
One drive appears to have duplicated itself by populating any drive letter thats free! Tried simply deleting the ones not needed but they reappear?
View 1 Replies
View Related
Aug 15, 2010
I am having issues with my external hard drive. It has been working just fine until today. The drive is showing up and I can access a few folders and fewer files, but the majority of the contents are nowhere to be found. It works without a hitch on every other computer in the house but the main one. Running chkdsk says the drive has a RAW file system and chkdsk can't run. This pc is running Windows 7 32-bit (all the others have Windows 7 64-bit) but no idea why I'm having this issue. Yesterday I installed a new printer, did some windows updates, and had a power outage, so I suspect the problem lies with one of those things. I'm really at a loss here as what to do though.
View 5 Replies
View Related
Apr 8, 2011
I have discovered that my external hard drive is showing "unknown file system" hence why it will not show anywhere on the computer for instance under disk management or my computer, is there any way to get around this? like can a file system be recovered?
View 9 Replies
View Related
Feb 28, 2011
How to Fix Missing Vista Hard Disk Partition Letter in Windows 7 ?
View 0 Replies
View Related
Jan 18, 2013
I decided to just revert to my old XP64. At first I was gonna try to dual-boot, but the fly in the ointment was all I had was an image on my external HD, which has about 100G of other stuff on it. My disc drive would not for the life of me burn an ISO image on any of my three DVD types. And the process of trying to find how to fix the drive problem and/or create just a bootable PARTITION on a HD without effecting everything else just drove me insane...which is kind of where I am now. After a week now I just have to get back to my project. lol And if that means no fancy windows 7 internet experience..while attempting a dual-boot scenerio workaround, I shrunk partition C and created a new 5G partition at the end of it. In EaseUS, I assigned it letter B and I set it to active, figuring it was to be bootable (wrong, I know). Additionally near the same time in Folder Properties, I unhid system files, folders...etc.
NOW the System drive showed as F! Then, attempting to use EasyBCD, it told me it could not find the BCD files to begin. So, naturally it had to do with that.I thought maybe it should have been B, but why would Ease US give me that letter option?After showing Easy BCD the file it seems to be OK....there. Also in Startup & Recovery it is listed in System Startup as the default system. But is it OK?Also, should it also be active. Did I inadvertently switch it by making the new partition active? What should I do to get it to boot properly. I AM planning on booting XP from a flash drive anyway, but still.
View 2 Replies
View Related
Jun 18, 2009
My backup software's profile database is expecting to backup to H:, which was the drive letter for my external backup drive back in XP. This drive comes up in Windows 7 as K, because Windows 7 has given my four usb card reader drives the letters F,G,H,I.
Disk Management will not show these four card reader drives unless media is inserted (connected vs. disconnected). I have changed the letters for F,G,I to T,U,W, but only because I have those types of cards (SD, CF, MS)...I do not have an XD or SmartMedia card for the one dang drive I really need to change.
What are my options, other than buying the cheapest SM card I can find to make the drive visible for this task? The SmartSyncPro database has many profiles, so remapping all those to point to K would be a major hassle.
View 2 Replies
View Related
Jul 16, 2011
I am running Windows 7 Pro. Have a external dual dock connected to a estata port. One of the drives assigned letter K often comes up as E and I have to change as application is looking for K. Another disk in this dock works fine. No problems. why this might be happening or anyway to prevent? Seems like when I go to disk management and assign K it should stay that way.
View 6 Replies
View Related
Jan 3, 2012
I have a toshiba satellite L750 running Windows 7 home premium, when trying to burn anything onto a blank disc I get as far as selecting my items and asking it to burn but it keeps telling me to insert a blank disc (which obviously I have). I have tried several different types of blank disc but it dosnt seem to recognise any of them.
View 2 Replies
View Related