Change Letter Designating Hard Drive (V:)?
Dec 28, 2012
I have built a computer for video editing and named the hard drives (C for the main drive, (M for the drive holding my music, (P for the drive for photos, and I named the drive to store my videos (V. However when I tried to write path to the V: drive I was told V: is an invalid path, I suppose because of the confusion with a followed by a / which would give you a / which can be confused with V but is not exactly the same. I went to My Computer and right clicked on the V: drive and clicked on "rename" in the drop down menu and changed the name to "Storage" but the (V persisted. Then I renamed again and named the drive "Storage (S" and now in "My Computer" the drive is shown as "Storage (S (V" When writing a path to put videos on this drive can I use either S:/ or V:/ to get videos into this drive? Is there some way to remove the (V
View 2 Replies
ADVERTISEMENT
Nov 16, 2009
I lost my Event Viewer, and had to do a repair installation to fix it. Unfortunately, during the repair install, Windows decided to rename my second HD as the D: drive... it was K: before that. Now I cannot access any of my docs, pictures, music, or videos through the normal means... they don't show up in libraries or explorer, and apps like Restorator and Sure Thing (CD labeler) cannot find them. I think that means the paths are broken..?
It won't allow me to rename the HD back into K: (it's not listed as available). I can access the data by clicking Computer > D, and I can see the data is there, but its unusable as of now. Any ideas?
View 8 Replies
View Related
Aug 21, 2012
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies
View Related
Apr 14, 2011
i want to change a HDD drive letter from F to D, this drive has games and apps installed on it, will those still run ok after i change the letters?
FYI the OS is on a seperate drive C
View 6 Replies
View Related
Aug 20, 2010
I had windows 7 on a SSD drive, assigned C: by windows 7, but it was full so I decided I'd clone it onto a bigger SSD drive using Acronis Disk Director. Went swimmingly I thought, both drives contained the same data. I wasn't too sure what my next step ought to be, whether acronis will have sorted it so that my new SSD now has the orginal SSD's drive letter or not. If it did, it will be mean a simple transition. But you guessed it, it left the drive letters the same, so when I booted up, it loaded from the orginal SSD. I then changed the original SSD drive letter, and used EasyBCD to remove the original boot and create a new one with the new SSD. Unfortunate now when I boot up Windows 7 I get a Preparing Your Desktop message for a couple of mins, but it's then followed by a screen with a cursor but no desktop icons or taskbar. It also seemed unresponsive to keyboard strokes.
View 3 Replies
View Related
Nov 4, 2010
I have a triple boot system:
C - Windows 7 Ultimate - SSD array D - Data - WD 640 spinner 1 E - Windows 7 Pro - 1st partition on WD 640 spinner 2 F - Windows 7 Enterprise - 2nd partition WD 640 spinner 2
Using Acronis True Image 2010, I keep 2 images of each OS on D.I'd like to put an image of C onto E, then make some changes to it. I think I tried this back in the Vista beta days, but can't recall if I ever got it to work, tempted to say "no".
View 9 Replies
View Related
Jan 17, 2009
Dual Boot Windows 7 x64 beta
XP x32
After installing Windows 7 into a new partition, the OS started up fine from the new dual boot screen, but I didn't have access to my Win XP partition from within explorer. In disk management, I was able to add a letter to my WinXP volume (I took the next available "O") and it popped up in explorer no problem. However, after restarting, Win 7 begins to load, then BSODs way too fast to think about catching with camera.
I got the option to run startup repair at the restart, and I did so. The conclusion there was that I had plugged in a device during the last session that was now causing problems. That is bogus, unless that device is my newly lettered partition. I read many a thread in here about re-lettering a partition that had lost its letter in the install (usually the other OS volume in a dual-boot environment), but didn't see those posters then have issues upon restart.
I can boot into XP, although here now NONE of my drives have letters.
Any Help? I really was diggin' my Windows 7 time, and really enjoyed taking advantage of all my RAM and x64 versions of CS4 and CAD.
View 3 Replies
View Related
Sep 24, 2012
I want to change the drive letter of the drive on which Windows 7 is installed.It is currently F:, and I want to change it to K:It is not possible from the Disk Management as I tried.
View 2 Replies
View Related
Dec 27, 2009
My Floppy Drive has the drive letter assignment (A). I would rather have it be (F). The traditional way to change drive letters is under disk management on right-click of My Computer. However, Floppy drives are not visible in the list. How can I change the letter?
View 1 Replies
View Related
Oct 14, 2009
Had an XP dual boot with Windows 7 RTM. Deleted XP C: drive and moved RTM D: drive over into it's space. I would like to keep and license this installation using retail Windows 7 Ultimate Signature Edition received with party pack.
Is there a way to change the Windows 7 D: drive to C: by running a repair install (upgrade over OS) as I would like to find a way to do this without having to do a clean install.
View 4 Replies
View Related
Oct 18, 2009
In 7 everything is all right.7 is c: and the boot partition is hidden.
But in XP the hidden partition is c: and visible.XP is d:,so some programs use default dir can't work.I tried disk management to change xp to c: but didn't succeed.
Anyway to change the drive letters and hide the 100m partition?
View 9 Replies
View Related
Jul 25, 2009
I deleted my existing OS then created two new partitions on the same drive. Then I installed Vista on one partition and that partition was properly named "c" as ususal. Then I started Windows 7 setup.exe from a different hard drive and let Windows 7 install itself into its own partition. When I got to "My Computer" the Windows 7 partition was labelled as "I" instead of the expected "C" which had never happend before when I did the same thing.
Does anyone know a save way to label the Win 7 drive as "C" while in Windows 7?
View 9 Replies
View Related
Dec 5, 2009
I have a second internal hard drive with data. Currently it is the slave. I have tried cable select with the same result. Disk management sees the drive but I cant assign it a letter. All options under Task -> All options are greyed out except delete volume. How do I give it a letter so I can access the data?.
View 4 Replies
View Related
Nov 4, 2012
Ok so here's a little backstory before I jump into my problem. I've got 2 harddrives installed; a SSD and a regular HDD. The SSD is labeled C: since it has Windows and other core programs while the HDD is labeled B:. The solid state is almost full while the regular one still has over a terabyte of space left to fill up. Normally, I have no problem installing new programs or games to the HDD till now.When I went to install my new game on B: it kept giving me invalid directory errors. So I went to the game's forums and discovered that the reason that issue was happening was because the game recognized drive letters A and B as floppy drives as opposed to hard drive letters. Further investigation revealed that apparently this little bit of design is hardcoded into the game and there really isn't any work around except changing the drive letter. So I looked up how to do so and made the change.....then the problems started.After changing the drive letter from B: to Z: I kept getting 'path does not exist' error message with features and hardware connected to Windows on C:.
For example, my DVD-ROM drive is labeled D: and everytime I tried to install the game after the drive letter change I got 'D:\, path does not exist. make sure the path is correct and try again' error. Another example, when trying to go to Device Manager to start a fix I couldn't because of 'explorer.exe, path does not exist' error. Basically, every step I tried where anything was connected to C: or D: I got the 'path does not exist' error. At this point I've done a system restore to before the drive letter changed and I'm running as I was before trying to install the game.My question is, how do I change the driver letter of my HDD without getting all the 'path does not exist' errors? If that's not possible, how do I fix the 'path does not exist errors' when the path starts with C: or D:? Is it done the same way I would with a program through the properties tab in the target path section and start in section? Or is there something more invasive I need to do when the path issue starts with C: and D:
View 7 Replies
View Related
Nov 3, 2011
I recently set up a new Systemax SYX-1113 PC with a SSD (C:) for Win 7 Pro and a 1TB HDD (G:) for my user libraries and programs. I need to upgrade the HDD from a 1GB to a 2 GB drive so I cloned the 1TB (G:) drive to a new 2TB (H:) drive. My new challenge is figuring out how to switch the drive letters on the two HDDs so that Windows looks to the new drive for the user directories and program files. I tried using disk manager in Windows 7 and got the BSOD - I guess it didn't like me changing the location of the active user profile. I assume I need to boot the PC from something other than the C: drive to make the change.
View 5 Replies
View Related
Dec 5, 2009
Windows 7, 32 bit, 12 partitions on 3 hdd's, Windows 7 on C:
When migrating to Windows 7 I first tried to update my Vista which I had used happily for 2 years. Installation went fine, but there were too many problems after.
So I bought a new 1 GB hdd and installed Windows 7 there from scratch. It is on a partition with drive letter C. I copied most of my old partitions to the new hdd, went fine.
When trying to delete one of the old hdd's with EASEUS Partition Master Home 4.1.1 manager software, there is one partition on it (which once before was called C, then successfully renamed to Z ) which I can't delete. I has on it the following folders:
$RECYCLE.BIN
Boot
System Volume Information (locked)
-->and files:
BOOTSECT.BAK
bootmgr
They are only 30,5 MB in size. So I resized the partition to 1 GB.
EASEUS characterizes it as Status = System, Pri/Log = Primary. Windows Disc manager characterizes it as System, Active, Primary Partition.
My question is: Can I change the drive letter from Z to B without risking the whole system to be unbootable? (and maybe never be bootable again?) When trying I just get the usual Windows warning.
I would be most grateful for an answer explaning what and why or why not.
View 9 Replies
View Related
Jan 26, 2011
I have an *.iso file on my hard disc.What is the easiest was to map this �.iso file to a (free) driver letter (e.g. M ?I don't want to burn it on a DVD and access it in my DVD drive? Is there a Win7 built-in way?
View 3 Replies
View Related
Oct 9, 2011
In order to download the Diablo 3 Beta to my hard drive, I had to change its letter from B to E (D3 doesn't allow hard drives named A or B... sigh). When I finished downloading D3, I switched the name back to B, and now all of my desktop and start menu icons have been replaced with the white icon you get when the path is unknown (yet all of the shortcuts still work when clicked on). When I would go into the properties menu, I tried to "change" the icons back to their normal ones, but it wouldn't work (changing them to any of the standard Windows icons worked, but trying to change them back to their default ones wouldn't go). Any thoughts? It's really frustrating.
View 2 Replies
View Related
Oct 17, 2012
So I can't change the drive letter. Do I need to use Partition Magic again? The more I keep hearing/reading "do you have a backup?" - makes me believe the tool (OS) isn't capable of handling/accessing the data properly.
View 8 Replies
View Related
Dec 25, 2009
Yesterday night I finally got the time around to finish the fresh installation of Windows 7, and I created a hard link for both my "Program Files" and "Program Files (x86)" using the command prompt in the Windows 7 installation disk.
The hard link points to another partition(E:) which I use to store Program Files purely. However, at the time of creating the hard link using the Windows 7 Installation disc, the volume letters were different than what it was in Windows. Now when I tried to access my files from Windows, it would give me an error. To better illustrate the problem,
The image above shows the hard link in (C:) and the volume which I link to (E:)
The image above shows the hard link and the directory it links to in E:. Notice that the Internet Explorer 8 on taskbar is no longer available. On the other hand, when I tried to install Firefox on "C:Program Files (x86)", it would be put in "C:ProgramData" which appears to be a new backup system that Microsoft used in case "Program Files" folder was deleted.
I know I'm in for another re-install, but what should I do to make the hard links work properly?
View 2 Replies
View Related
May 26, 2012
I formatted and installed windows 7 64 bit in a pc which previously had windows 7 32 bit. When i booted my 1tb dynamic disk was not detected. So I went into disk management and it had listed my disk as "Foreign Disk". So i imported the foreign disk.
The drive was detected and opened. So i rebooted the pc but now the drive is still not appearing in my computer. When i go to disk management the 1tb appears but there is no drive letter assigned. When i try to assign drive letter it statest that "Specified File cannot be found"
View 1 Replies
View Related
Jun 12, 2012
Is it possible and feasible to change the hard drive to a solid state drive on a Toshiba Satellite Pro L300-1FK laptop.
View 5 Replies
View Related
Dec 28, 2009
Basically i brought an OEM version of windows the other day ,Installed fine and all was going well till my hard drive started playing up. So iv invested in a new hard drive but....how do i go about uninstalling this copy and putting it on the new drive, Because i was told it could only be installed on one pc ?
View 2 Replies
View Related
Nov 18, 2011
So I have a 64MB SSD that I use as my boot drive, then I have 1TB in SATA. I have Windows loaded on my SSD and everything works great. What I want to know, how do I move the primary drive to the SATA? Right now, SSD is "C" and SATA is "E".
View 12 Replies
View Related
Feb 7, 2012
This is quite a problem, I have a very small HDD that i was forced to use instead of my 700GB external HDD. How can I change this? Changing the path would not work due to it being the path of the small drive being "C"
View 7 Replies
View Related
Jun 2, 2009
The system:
Drive 1: vista boot loader, vista32, two partitions (vista on C, some stuff on D), both NTFS
drive 2: broken grub loader (never mind actually), one ntfs partition with some porn, games, and other usual stuff . named E.
so then, i copy the 7100 x64 distr into my flash drive, boot it, and install our beloved 7even into the drive 2. it does not ask me anything, write its boot loader to drive 1, lets me choose which OS to boot into each time... perfect. BUT(T):
7even named her own partition C, while drive 1 partitions became D and E. i swapped last two easily, using 7even's disk management utility. that's 1 of 3 and that's not enough. i really want 7even's partition to have the same letter as in vista. i even googled it, and didn't find any answers.
7even is still unconfigured, so it would not be a problem to reinstall it. even more, if it's really necesarry, i can move all of drive 1's data somewhere else, so i can format it.
View 9 Replies
View Related
May 9, 2011
Windows 7 Home Premium Under Windows Explorer 'Computer' all of the my drives and storage devices are listed. I am trying to change the icon associated with my esata external hard drive.
View 1 Replies
View Related
Apr 1, 2012
how can i change a hard drive in a touch smart 610 hp, but i do not have cd for all the window 7 and audio programs.
View 3 Replies
View Related
Mar 2, 2010
I just re-replaced my Segate ST31000340AS with a new Segate ST32000641AS (64m / 600mb) double the old drive. Did a clean install the 5.9 number did not change. Anyone knows why?
View 13 Replies
View Related
Feb 10, 2013
I have a toshiba satellite laptop and had to replace the hard drive. I am trying to reload Windows 7 from a USB. I went into the settings and changed it to boot from USB but the computer is not recognizing it. It gives me a black screen that says "Check cable connection! PXE-MOF: Exiting Intel PXE ROM. No bootable device--insert boot disk and press any key" I also have tried using a Windows 7 upgrade cd that says it contains the full version but got the same message.
View 3 Replies
View Related
Jun 13, 2012
I have an OCZ vertex 3 as my boot drive and a 2TB Hitachi drive as my storage drive. When I installed the system, I changed the 2TB drive letter name to G. Recently, I installed a card reader into my system, which somehow made one of the card slots G and the 2TB D. Now I can't run any of my programs installed on the mechanical drive. I can't even open diskpart
View 4 Replies
View Related