My Floppy Drive has the drive letter assignment (A). I would rather have it be (F). The traditional way to change drive letters is under disk management on right-click of My Computer. However, Floppy drives are not visible in the list. How can I change the letter?
View 1 Replies
I lost my Event Viewer, and had to do a repair installation to fix it. Unfortunately, during the repair install, Windows decided to rename my second HD as the D: drive... it was K: before that. Now I cannot access any of my docs, pictures, music, or videos through the normal means... they don't show up in libraries or explorer, and apps like Restorator and Sure Thing (CD labeler) cannot find them. I think that means the paths are broken..?
It won't allow me to rename the HD back into K: (it's not listed as available). I can access the data by clicking Computer > D, and I can see the data is there, but its unusable as of now. Any ideas?
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View Relatedi want to change a HDD drive letter from F to D, this drive has games and apps installed on it, will those still run ok after i change the letters?
FYI the OS is on a seperate drive C
I had windows 7 on a SSD drive, assigned C: by windows 7, but it was full so I decided I'd clone it onto a bigger SSD drive using Acronis Disk Director. Went swimmingly I thought, both drives contained the same data. I wasn't too sure what my next step ought to be, whether acronis will have sorted it so that my new SSD now has the orginal SSD's drive letter or not. If it did, it will be mean a simple transition. But you guessed it, it left the drive letters the same, so when I booted up, it loaded from the orginal SSD. I then changed the original SSD drive letter, and used EasyBCD to remove the original boot and create a new one with the new SSD. Unfortunate now when I boot up Windows 7 I get a Preparing Your Desktop message for a couple of mins, but it's then followed by a screen with a cursor but no desktop icons or taskbar. It also seemed unresponsive to keyboard strokes.
View 3 Replies View RelatedI have a triple boot system:
C - Windows 7 Ultimate - SSD array D - Data - WD 640 spinner 1 E - Windows 7 Pro - 1st partition on WD 640 spinner 2 F - Windows 7 Enterprise - 2nd partition WD 640 spinner 2
Using Acronis True Image 2010, I keep 2 images of each OS on D.I'd like to put an image of C onto E, then make some changes to it. I think I tried this back in the Vista beta days, but can't recall if I ever got it to work, tempted to say "no".
Dual Boot Windows 7 x64 beta
XP x32
After installing Windows 7 into a new partition, the OS started up fine from the new dual boot screen, but I didn't have access to my Win XP partition from within explorer. In disk management, I was able to add a letter to my WinXP volume (I took the next available "O") and it popped up in explorer no problem. However, after restarting, Win 7 begins to load, then BSODs way too fast to think about catching with camera.
I got the option to run startup repair at the restart, and I did so. The conclusion there was that I had plugged in a device during the last session that was now causing problems. That is bogus, unless that device is my newly lettered partition. I read many a thread in here about re-lettering a partition that had lost its letter in the install (usually the other OS volume in a dual-boot environment), but didn't see those posters then have issues upon restart.
I can boot into XP, although here now NONE of my drives have letters.
Any Help? I really was diggin' my Windows 7 time, and really enjoyed taking advantage of all my RAM and x64 versions of CS4 and CAD.
I want to change the drive letter of the drive on which Windows 7 is installed.It is currently F:, and I want to change it to K:It is not possible from the Disk Management as I tried.
View 2 Replies View RelatedDo you have a floppy controller card for a PCI1-2 card slot available on my Mother board Missing FDI connector ECS-A740GM-M?
View 2 Replies View RelatedI have built a computer for video editing and named the hard drives (C for the main drive, (M for the drive holding my music, (P for the drive for photos, and I named the drive to store my videos (V. However when I tried to write path to the V: drive I was told V: is an invalid path, I suppose because of the confusion with a followed by a / which would give you a / which can be confused with V but is not exactly the same. I went to My Computer and right clicked on the V: drive and clicked on "rename" in the drop down menu and changed the name to "Storage" but the (V persisted. Then I renamed again and named the drive "Storage (S" and now in "My Computer" the drive is shown as "Storage (S (V" When writing a path to put videos on this drive can I use either S:/ or V:/ to get videos into this drive? Is there some way to remove the (V
View 2 Replies View RelatedHad an XP dual boot with Windows 7 RTM. Deleted XP C: drive and moved RTM D: drive over into it's space. I would like to keep and license this installation using retail Windows 7 Ultimate Signature Edition received with party pack.
Is there a way to change the Windows 7 D: drive to C: by running a repair install (upgrade over OS) as I would like to find a way to do this without having to do a clean install.
In 7 everything is all right.7 is c: and the boot partition is hidden.
But in XP the hidden partition is c: and visible.XP is d:,so some programs use default dir can't work.I tried disk management to change xp to c: but didn't succeed.
Anyway to change the drive letters and hide the 100m partition?
I deleted my existing OS then created two new partitions on the same drive. Then I installed Vista on one partition and that partition was properly named "c" as ususal. Then I started Windows 7 setup.exe from a different hard drive and let Windows 7 install itself into its own partition. When I got to "My Computer" the Windows 7 partition was labelled as "I" instead of the expected "C" which had never happend before when I did the same thing.
Does anyone know a save way to label the Win 7 drive as "C" while in Windows 7?
Ok so here's a little backstory before I jump into my problem. I've got 2 harddrives installed; a SSD and a regular HDD. The SSD is labeled C: since it has Windows and other core programs while the HDD is labeled B:. The solid state is almost full while the regular one still has over a terabyte of space left to fill up. Normally, I have no problem installing new programs or games to the HDD till now.When I went to install my new game on B: it kept giving me invalid directory errors. So I went to the game's forums and discovered that the reason that issue was happening was because the game recognized drive letters A and B as floppy drives as opposed to hard drive letters. Further investigation revealed that apparently this little bit of design is hardcoded into the game and there really isn't any work around except changing the drive letter. So I looked up how to do so and made the change.....then the problems started.After changing the drive letter from B: to Z: I kept getting 'path does not exist' error message with features and hardware connected to Windows on C:.
For example, my DVD-ROM drive is labeled D: and everytime I tried to install the game after the drive letter change I got 'D:\, path does not exist. make sure the path is correct and try again' error. Another example, when trying to go to Device Manager to start a fix I couldn't because of 'explorer.exe, path does not exist' error. Basically, every step I tried where anything was connected to C: or D: I got the 'path does not exist' error. At this point I've done a system restore to before the drive letter changed and I'm running as I was before trying to install the game.My question is, how do I change the driver letter of my HDD without getting all the 'path does not exist' errors? If that's not possible, how do I fix the 'path does not exist errors' when the path starts with C: or D:? Is it done the same way I would with a program through the properties tab in the target path section and start in section? Or is there something more invasive I need to do when the path issue starts with C: and D:
I recently set up a new Systemax SYX-1113 PC with a SSD (C:) for Win 7 Pro and a 1TB HDD (G:) for my user libraries and programs. I need to upgrade the HDD from a 1GB to a 2 GB drive so I cloned the 1TB (G:) drive to a new 2TB (H:) drive. My new challenge is figuring out how to switch the drive letters on the two HDDs so that Windows looks to the new drive for the user directories and program files. I tried using disk manager in Windows 7 and got the BSOD - I guess it didn't like me changing the location of the active user profile. I assume I need to boot the PC from something other than the C: drive to make the change.
View 5 Replies View RelatedWindows 7, 32 bit, 12 partitions on 3 hdd's, Windows 7 on C:
When migrating to Windows 7 I first tried to update my Vista which I had used happily for 2 years. Installation went fine, but there were too many problems after.
So I bought a new 1 GB hdd and installed Windows 7 there from scratch. It is on a partition with drive letter C. I copied most of my old partitions to the new hdd, went fine.
When trying to delete one of the old hdd's with EASEUS Partition Master Home 4.1.1 manager software, there is one partition on it (which once before was called C, then successfully renamed to Z ) which I can't delete. I has on it the following folders:
$RECYCLE.BIN
Boot
System Volume Information (locked)
-->and files:
BOOTSECT.BAK
bootmgr
They are only 30,5 MB in size. So I resized the partition to 1 GB.
EASEUS characterizes it as Status = System, Pri/Log = Primary. Windows Disc manager characterizes it as System, Active, Primary Partition.
My question is: Can I change the drive letter from Z to B without risking the whole system to be unbootable? (and maybe never be bootable again?) When trying I just get the usual Windows warning.
I would be most grateful for an answer explaning what and why or why not.
So I can't change the drive letter. Do I need to use Partition Magic again? The more I keep hearing/reading "do you have a backup?" - makes me believe the tool (OS) isn't capable of handling/accessing the data properly.
View 8 Replies View RelatedI've been noticing after re-installing Win 7 that I get random floppy drive seeks and the hard drive light flashes like crazy and then everything is fine again.I have Clamwin AV,Spyware Blaster and Spybot S&D installed,but that's it,no Windows Defender or Essentials AV.Any ideas what causes this? It's a minor annoyance,but I just want to make sure it's not damaging anything.Also would Readyboost help me? I've got 2 gigs dual channel PC3200 ram(or I could go with 2.5 gig single channel PC2700)and a P4 at 3 gig until I can afford to upgrade my comp.This is my first post in quite awhile so I hope this is in the right place
View 7 Replies View RelatedI've got a floppy drive A: installed on my computer, but of-course, i don't have no floppy drive, how do i get rid of this problem (im using windows 7 RC).
Answer:-
Go into your BIOS and set it to disable the floppy controller. The BIOS will tell Windows (any version of Windows) that a floppy drive is present, even if none is hooked up, if the floppy controller is enabled.
The bios is detecting all of them but Windows 7 is not. The floppy's power is on all the time and it is enabled in the bios. My 3rd hard drive is not being detected, however I did delete some windows 7 files and it was working before that. And I have no idea about my dvd drive. My other drive is working though.
View 1 Replies View RelatedI'm trying to run a game from a floppy disk that I used on Windows 95 on Windows 7. But I get an error message saying its not compatible with my version of windows. Any ideas on how I can make it work?
Answer:-
Set up a virtual machine of Windows 98 (preferably 98 SE) using something like VirtualBox (ensure you have a copy of Windows 98 handy as well...). Install and play from there.
I require a 3.5 inch floppy drive on my computer. However, whenever I select it in explorer, it starts to read the disk, then says it's not formatted, or puts up a please insert disk notice.
View 1 Replies View RelatedIf your not going to use a Floppy Drive in your Computer you can disable it and ger rid of the Floppy Drive icon that sits in my computer.
Right click on my computer and select properties. In the hardware tab select 'Device Manager'. In the device manager there should be an expandable menu labelled 'Floppy disk controllers', expand this and you should see something like 'Standard floppy disk controller' right click on this and click disable. If at some time you do need to use a Floppy Drive you can re-able it.
The system:
Drive 1: vista boot loader, vista32, two partitions (vista on C, some stuff on D), both NTFS
drive 2: broken grub loader (never mind actually), one ntfs partition with some porn, games, and other usual stuff . named E.
so then, i copy the 7100 x64 distr into my flash drive, boot it, and install our beloved 7even into the drive 2. it does not ask me anything, write its boot loader to drive 1, lets me choose which OS to boot into each time... perfect. BUT(T):
7even named her own partition C, while drive 1 partitions became D and E. i swapped last two easily, using 7even's disk management utility. that's 1 of 3 and that's not enough. i really want 7even's partition to have the same letter as in vista. i even googled it, and didn't find any answers.
7even is still unconfigured, so it would not be a problem to reinstall it. even more, if it's really necesarry, i can move all of drive 1's data somewhere else, so i can format it.
I have a WDC USB floppy drive. One day day ago when i connected my floppy to PC it worked. When i connected it to other computer it not worked and then when i connected it to my PC again it's not working. When i connect floppy it says nothing. I tried to update disk drivers with Computer Management and it says that my drivers are up to date. I tried to uninstall drivers and than install it again and that's not working. BIOS and Computer Management can see the floppy drive, but Win Explorer can't see floppy. What should i do to access my floppy and my files?
View 1 Replies View RelatedFor some reason my USB floppy drive is not found or recognized in Win 7 64 bit, it was working but not anymore. Can't find it in Computer Management-Disk Management but it is listed in Devices and shows no conflicts.
View 9 Replies View RelatedHas anyone else had trouble using a USB floppy drive in Windows 7? The drive does not appear in My Computer, I have tried troubleshooting the device, uninstalling it and re-installing it and trying to install other drivers to resolve the issue (windows will not accept others as it already has the best driver apparently...). I'm at a loss now I have even tried using drivermax to correct the problem but even that does not recognise the device.To ensure it wasn't an issue with the Floppy drive itself I have even tried using another, with the same result.
View 9 Replies View Relatedfor some unknown reason my Floppy drive runs very, very slow on 64bit Windows 7. Takes about a minute to open an office XL file, and longer to close it... a lot longer. Even after the file is closed, the floppy light is still on an clicking, like it's reading the disc still. The drive itself is OK. I've got XP Pro on the same PC and the floppy is like lightning on XP. Also tried updating drivers, but it says it's got the best drivers available, and that it's working OK. So what the heck is it?
View 7 Replies View Relatedwere can i get drivers for my floppy drive for windows 7
View 1 Replies View RelatedI have an OCZ vertex 3 as my boot drive and a 2TB Hitachi drive as my storage drive. When I installed the system, I changed the 2TB drive letter name to G. Recently, I installed a card reader into my system, which somehow made one of the card slots G and the 2TB D. Now I can't run any of my programs installed on the mechanical drive. I can't even open diskpart
View 4 Replies View RelatedI was having no problems with my Windows 7 X64 bit till I plugged in a USB floppy and copied some photos to the hard drive. The windows portion of the boot went to approx 5 times what it was. I have disabled all the boot devices except the hard drive and have uninstalled the driver that Windows 7 installed when I plugged in the floppy.Runs fine after the boot.
View 5 Replies View Related
