The bios is detecting all of them but Windows 7 is not. The floppy's power is on all the time and it is enabled in the bios. My 3rd hard drive is not being detected, however I did delete some windows 7 files and it was working before that. And I have no idea about my dvd drive. My other drive is working though.
View 1 RepliesI've been noticing after re-installing Win 7 that I get random floppy drive seeks and the hard drive light flashes like crazy and then everything is fine again.I have Clamwin AV,Spyware Blaster and Spybot S&D installed,but that's it,no Windows Defender or Essentials AV.Any ideas what causes this? It's a minor annoyance,but I just want to make sure it's not damaging anything.Also would Readyboost help me? I've got 2 gigs dual channel PC3200 ram(or I could go with 2.5 gig single channel PC2700)and a P4 at 3 gig until I can afford to upgrade my comp.This is my first post in quite awhile so I hope this is in the right place
View 7 Replies View Relatedone day i was playing mafia ii and all of the sudden everything stops my desktop was empty error message everywhere my pc couldnt find my hard drive . i used sistem restore now every picture and all my music is gone
View 4 Replies View RelatedI'm installing a fresh copy of Windows 7 Ultimate on an Asus UL80J. When asking where I want to install windows, I get "No drives were found. Click to load a driver". The drive is new, has no problems, and is detected in the BIOS fine. Also, my Windows XP CD detects the drive just fine. I've tried both options in the BIOS for setting SATA to IDE and AHCI. I assume I'm missing a SATA driver needed at installation time, but I can't find one online or from the manufacturer.
View 8 Replies View RelatedIm upgrading to windows 7 on a new hard drive and it will not detect my seagate hard drive?
View 9 Replies View Relatedi just built a computer today. and its the famous windows 7 not detecting hard drive but first here is my set up
amd fx 4100
gigabyte 970a-d3 mobo
kingston 4 gb ram (1 stick)
WD 500gb hard drive
now its the famous install. everything is brand new the new computer can not get any updates its not hooked to the internet, nor do i have a flash drive im on a crappy laptop right now that is surprisingly not fried yet, so i cant do anything updating yet, all i want to do is install windows 7 to my new pc, but it says no driver found, ive even tried putting in the mobo disc like gigabyte said to and still nothing. what can i do? my bios recognizes my cd/dvd rom drive and it also recognizes my hard drive. its all there. but windows 7 wont. is there something in the bios i need to change, i called microsoft and they told me i needed to reformat my hard drive but wouldnt tell me how, gigabyte told me the same thing and the computer store where i bought all my stuff wont touch my computer unless i give them $41 for diagnostics and $41 for install, the guy there is rude and doesnt seem to care about customers who made a HUGE purchase 2 hours before. everybuddy is saying update this update that but i cant the computer has no OS. it has boot screen, bios and windows install.
Do you have a floppy controller card for a PCI1-2 card slot available on my Mother board Missing FDI connector ECS-A740GM-M?
View 2 Replies View Relatedmy pc was running fine but suddenly it switched off on its own, as if there was a power failure (it might have been due to a virus cause i just then had downloaded a file that contained a exe file that shut up my anti virus... but i've never heard of a virus killing hardware) on restart after the windows startup screen, a blue screen flashes and restarts again ..startup recovery doesn't work either .. when i try reinstalling windows using the disk . it doesn't detect any hard drive.i've tried to remove all the components of the pc and reconnect them but it still doesn't work.
View 11 Replies View RelatedI installed Windows 7 64-bit on my computer which has only 1 hard drive (640GB). I partitioned it using XP to have 4 partitions: 1) XP Partition 2) Linux Partition 3) Linux Swap 4) Windows 7.The problem is Windows 7 cannot detect any partition besides it's own partition, so I cannot access any of my data from the other partitions (XP and ubuntu --- I don't care about ubuntu but I need the data on the XP partition). I know the other partitions exist since I can access XP still, and I believe XP can detect all 4 partitions.I went to start->menu then searched for partition and selected "Create and format hard disk partitions" and it actually detected all the partitions. The problem was the other partitions did not have drive letters associated with them.So I just right clicked and changed the drive letters.
View 4 Replies View RelatedI recently built a new computer and connected my old hard drive to copy files across to my new one. Both drives had Windows 7 installed and while staring up I had to select one to boot from. I have since removed my old hard drive but am still asked to select one to boot from even though there is now only one connected. How do I remove my old hard drive so that it will automatically boot from the new one?
View 8 Replies View RelatedI purchased Dell Inspiron i14z Ultrabook, it has a hybrid SSD, it have 32gb SSD and the rest 470gb hard drive. It had Windows 8 and I couldn't stand it...I changed the BIOS settings from Intel Smart Response to AHCI, used Wipe Drive, (which detected the hybrid SSD as two separate hard drives) to format both hard drives, installed Windows 7 on the 32gb Hard Drive (I assume this is the SSD part), and everything went great.But when I click MyComputer, it only shows 32GB as my hard drive, how do I set the settings where it would show the rest of the hard drive that is not SSD?Whenever I change the AHCI setting back to Intel Smart Response Technology, it gives me a brief Blue Screen of Death briefly, then restarts in a loop.
View 1 Replies View RelatedI have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies View RelatedI've got a floppy drive A: installed on my computer, but of-course, i don't have no floppy drive, how do i get rid of this problem (im using windows 7 RC).
Answer:-
Go into your BIOS and set it to disable the floppy controller. The BIOS will tell Windows (any version of Windows) that a floppy drive is present, even if none is hooked up, if the floppy controller is enabled.
I'm trying to run a game from a floppy disk that I used on Windows 95 on Windows 7. But I get an error message saying its not compatible with my version of windows. Any ideas on how I can make it work?
Answer:-
Set up a virtual machine of Windows 98 (preferably 98 SE) using something like VirtualBox (ensure you have a copy of Windows 98 handy as well...). Install and play from there.
I require a 3.5 inch floppy drive on my computer. However, whenever I select it in explorer, it starts to read the disk, then says it's not formatted, or puts up a please insert disk notice.
View 1 Replies View RelatedIf your not going to use a Floppy Drive in your Computer you can disable it and ger rid of the Floppy Drive icon that sits in my computer.
Right click on my computer and select properties. In the hardware tab select 'Device Manager'. In the device manager there should be an expandable menu labelled 'Floppy disk controllers', expand this and you should see something like 'Standard floppy disk controller' right click on this and click disable. If at some time you do need to use a Floppy Drive you can re-able it.
I have a WDC USB floppy drive. One day day ago when i connected my floppy to PC it worked. When i connected it to other computer it not worked and then when i connected it to my PC again it's not working. When i connect floppy it says nothing. I tried to update disk drivers with Computer Management and it says that my drivers are up to date. I tried to uninstall drivers and than install it again and that's not working. BIOS and Computer Management can see the floppy drive, but Win Explorer can't see floppy. What should i do to access my floppy and my files?
View 1 Replies View RelatedFor some reason my USB floppy drive is not found or recognized in Win 7 64 bit, it was working but not anymore. Can't find it in Computer Management-Disk Management but it is listed in Devices and shows no conflicts.
View 9 Replies View RelatedHas anyone else had trouble using a USB floppy drive in Windows 7? The drive does not appear in My Computer, I have tried troubleshooting the device, uninstalling it and re-installing it and trying to install other drivers to resolve the issue (windows will not accept others as it already has the best driver apparently...). I'm at a loss now I have even tried using drivermax to correct the problem but even that does not recognise the device.To ensure it wasn't an issue with the Floppy drive itself I have even tried using another, with the same result.
View 9 Replies View Relatedfor some unknown reason my Floppy drive runs very, very slow on 64bit Windows 7. Takes about a minute to open an office XL file, and longer to close it... a lot longer. Even after the file is closed, the floppy light is still on an clicking, like it's reading the disc still. The drive itself is OK. I've got XP Pro on the same PC and the floppy is like lightning on XP. Also tried updating drivers, but it says it's got the best drivers available, and that it's working OK. So what the heck is it?
View 7 Replies View RelatedMy Floppy Drive has the drive letter assignment (A). I would rather have it be (F). The traditional way to change drive letters is under disk management on right-click of My Computer. However, Floppy drives are not visible in the list. How can I change the letter?
View 1 Replies View Relatedwere can i get drivers for my floppy drive for windows 7
View 1 Replies View RelatedI was having no problems with my Windows 7 X64 bit till I plugged in a USB floppy and copied some photos to the hard drive. The windows portion of the boot went to approx 5 times what it was. I have disabled all the boot devices except the hard drive and have uninstalled the driver that Windows 7 installed when I plugged in the floppy.Runs fine after the boot.
View 5 Replies View RelatedI am installing Windows 7 pro 32 bit on a machine with no floppy drive.The mobo is Asus p5b and intel e6600 core 2 duo cpu.how can i get raid drivers on to machine without floppy drive.can i use usb pendrive? or can i install driver after i have installed Windows 7 pro?
View 3 Replies View RelatedI an unable to make my floppy drive work on my new computer with windows 7 64 bit. I know there is a card made in England named Catweasel that is supposed to do the job, but they are hard to come by.
View 9 Replies View RelatedSo, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies View RelatedI gave my pen drive to my friend she used it in internet cafe but it doesn't working from that day.it is not showing in my pc when i insert into my laptop
View 1 Replies View RelatedI have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies View RelatedI have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedMe and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View RelatedI have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies View Related