Another Windows 7 Not Detecting Hard Drive?
Mar 9, 2012
i just built a computer today. and its the famous windows 7 not detecting hard drive but first here is my set up
amd fx 4100
gigabyte 970a-d3 mobo
kingston 4 gb ram (1 stick)
WD 500gb hard drive
now its the famous install. everything is brand new the new computer can not get any updates its not hooked to the internet, nor do i have a flash drive im on a crappy laptop right now that is surprisingly not fried yet, so i cant do anything updating yet, all i want to do is install windows 7 to my new pc, but it says no driver found, ive even tried putting in the mobo disc like gigabyte said to and still nothing. what can i do? my bios recognizes my cd/dvd rom drive and it also recognizes my hard drive. its all there. but windows 7 wont. is there something in the bios i need to change, i called microsoft and they told me i needed to reformat my hard drive but wouldnt tell me how, gigabyte told me the same thing and the computer store where i bought all my stuff wont touch my computer unless i give them $41 for diagnostics and $41 for install, the guy there is rude and doesnt seem to care about customers who made a HUGE purchase 2 hours before. everybuddy is saying update this update that but i cant the computer has no OS. it has boot screen, bios and windows install.
View 9 Replies
ADVERTISEMENT
Jan 26, 2011
Im upgrading to windows 7 on a new hard drive and it will not detect my seagate hard drive?
View 9 Replies
View Related
Jun 8, 2011
my pc was running fine but suddenly it switched off on its own, as if there was a power failure (it might have been due to a virus cause i just then had downloaded a file that contained a exe file that shut up my anti virus... but i've never heard of a virus killing hardware) on restart after the windows startup screen, a blue screen flashes and restarts again ..startup recovery doesn't work either .. when i try reinstalling windows using the disk . it doesn't detect any hard drive.i've tried to remove all the components of the pc and reconnect them but it still doesn't work.
View 11 Replies
View Related
Jan 13, 2009
I installed Windows 7 64-bit on my computer which has only 1 hard drive (640GB). I partitioned it using XP to have 4 partitions: 1) XP Partition 2) Linux Partition 3) Linux Swap 4) Windows 7.The problem is Windows 7 cannot detect any partition besides it's own partition, so I cannot access any of my data from the other partitions (XP and ubuntu --- I don't care about ubuntu but I need the data on the XP partition). I know the other partitions exist since I can access XP still, and I believe XP can detect all 4 partitions.I went to start->menu then searched for partition and selected "Create and format hard disk partitions" and it actually detected all the partitions. The problem was the other partitions did not have drive letters associated with them.So I just right clicked and changed the drive letters.
View 4 Replies
View Related
Nov 14, 2012
I purchased Dell Inspiron i14z Ultrabook, it has a hybrid SSD, it have 32gb SSD and the rest 470gb hard drive. It had Windows 8 and I couldn't stand it...I changed the BIOS settings from Intel Smart Response to AHCI, used Wipe Drive, (which detected the hybrid SSD as two separate hard drives) to format both hard drives, installed Windows 7 on the 32gb Hard Drive (I assume this is the SSD part), and everything went great.But when I click MyComputer, it only shows 32GB as my hard drive, how do I set the settings where it would show the rest of the hard drive that is not SSD?Whenever I change the AHCI setting back to Intel Smart Response Technology, it gives me a brief Blue Screen of Death briefly, then restarts in a loop.
View 1 Replies
View Related
Aug 23, 2012
one day i was playing mafia ii and all of the sudden everything stops my desktop was empty error message everywhere my pc couldnt find my hard drive . i used sistem restore now every picture and all my music is gone
View 4 Replies
View Related
Aug 16, 2011
I'm installing a fresh copy of Windows 7 Ultimate on an Asus UL80J. When asking where I want to install windows, I get "No drives were found. Click to load a driver". The drive is new, has no problems, and is detected in the BIOS fine. Also, my Windows XP CD detects the drive just fine. I've tried both options in the BIOS for setting SATA to IDE and AHCI. I assume I'm missing a SATA driver needed at installation time, but I can't find one online or from the manufacturer.
View 8 Replies
View Related
Nov 27, 2011
I recently built a new computer and connected my old hard drive to copy files across to my new one. Both drives had Windows 7 installed and while staring up I had to select one to boot from. I have since removed my old hard drive but am still asked to select one to boot from even though there is now only one connected. How do I remove my old hard drive so that it will automatically boot from the new one?
View 8 Replies
View Related
Dec 31, 2009
The bios is detecting all of them but Windows 7 is not. The floppy's power is on all the time and it is enabled in the bios. My 3rd hard drive is not being detected, however I did delete some windows 7 files and it was working before that. And I have no idea about my dvd drive. My other drive is working though.
View 1 Replies
View Related
Apr 28, 2012
have two hard disks in my PC one is IDE(120GB) and the other is IDE(60GB). My PC is not detecting my IDE(120GB) hard disk. I have been replaced my jumper cable but it still not recognizing
View 1 Replies
View Related
Mar 1, 2010
Logitech usb hub is not detecting external hard disk seagate 320 gb fr. i have windows 7 ultimate 64 bit while connecting external hard disk directly to usb port its working but when i connecting this hard disk using logitech 4 port usb hub on the same usb port its not detecting but my pen drive is working through usb hub.
View 2 Replies
View Related
Apr 6, 2011
I recently bought a SSD (Solid State Drive) it is a Samsung 64GB. My computer is an Asus with an i5 Processor.
Anyway I know the SSD works fine because currently I have Ubuntu downloaded on it, running just fine. For some reason however, Windows 7 is not detecting my drive. Under my computer, or upon booting from a disk, it will not detect it. The reason I am wanting to detect it, is because I would like to backup windows 7 onto my SSD and boot from there.
View 3 Replies
View Related
Dec 16, 2012
I gave my pen drive to my friend she used it in internet cafe but it doesn't working from that day.it is not showing in my pc when i insert into my laptop
View 1 Replies
View Related
May 28, 2011
I'm ripping my audio CDs, and I just had a problem getting the drive to open, So I looked and saw a tiny hole on the drive, I stuck a paper clip in it and it opened. Now however I cannot get it to detect any CDs. It will not load anything.Now I looked and I realized that my CD/DVD drive was not listed on my computer.
View 3 Replies
View Related
May 28, 2011
Okay, so I'm ripping my audio CDs, and I just had a problem getting the drive to open, So I looked and saw a tiny hole on the drive, I stuck a paper clip in it and it opened.
Now however I cannot get it to detect any CDs. It will not load anything. Now I looked and I realized that my CD/DVD drive was not listed on my computer. I am trying to figure out what driver I had, so I can try re-installing it. I run a Dell Inspiron M5010 64 bit.
View 3 Replies
View Related
Sep 30, 2011
my pendrive name is cruzer edge 8gb it detected in my computer but i can't use it properly.
View 1 Replies
View Related
May 22, 2012
I soon as I play a dvd it stops workig & optical driver not detected, needs dvd decoder.
View 1 Replies
View Related
Dec 17, 2012
dell laptop not detecting pen drive?
View 2 Replies
View Related
Nov 14, 2012
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies
View Related
Oct 25, 2011
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies
View Related
Jun 16, 2011
I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies
View Related
Mar 30, 2012
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies
View Related
Mar 4, 2010
Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies
View Related
Dec 24, 2011
I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies
View Related
Jan 21, 2013
I have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies
View Related
Nov 16, 2009
I have Vista installed on my Hard Drive, 250 GB.
But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.
Is that possible, to have both separately?
View 3 Replies
View Related
Sep 8, 2012
I'm planning on buying an Asus Zenbook UX32VD soon and it comes with a standard 7200 rpm drive instead of an SSD. So because of that i want to upgrade it to an SSD drive.But I also want to have the same windows thats installed moved over to the new drive. The drives i've looked at all have data migration tools and one comes with norton ghost but i've never had to do something like this before where i didn't have an optical drive and a windows disk for a reinstall so i'm looking for some help here before i order everything and then do something stupid.i don't mind if i have to lose whatever settings and data i might have setup already, but i just want to make sure i have the same windows and the additions it comes with moved over to the new SSD drive.
View 9 Replies
View Related
Oct 8, 2010
I have tried numerous times on my PC to install Windows 7 onto my Sata Drive to no avail. Yet as soon as I plug in my IDE HD it installs fine.I have unplugged all external peripherals USB and internal Card Reader. Set my Bios ok as it sees both the Hard Drive and DVD fine (Both in the bios and during selection of hard drive during windows 7 installation). Yet when I come to install it, it craps out at a random percentage saying cannot read from source or worse yet it crawls so slow through the percentages (I really don't think Windows 7 should take 6 hours to get to 15%!!) Yet both the hard drive and dvd are fine and the disc works great on my other PC without the sata drive in.
My motherboard is a Biostar G31-M7 TE with latest bios now what is odd is that I recently updated the BIOS to the latest one so does my problem come from here or was it always going to be a problem on this board? Also when I do have Windows 7 installed on the IDE drive when I plug in ther sata drive inside the whole system goes belly up (from freezes when transferring large files to just not seeing the drive)
View 9 Replies
View Related
Jun 16, 2012
I have an Alienware M14x R1 with a SSD - Crucial M4 in the main spot and the stock HD in the optical drive. I have never had any issues with any of this stuff before this clean install - and I have done clean installs previously. I also used Parted Magic to Secure Erase my SSD and HD before install.I am experiencing some pretty frustrating problems:
1. I have NO INTERNET CONNECTION (everyone keeps telling me to install drivers...how can I do this without internet connection??)
2. Windows is not recognizing my second hard drive in the optical drive even though it did when I was installing and showed it at the section where you can add new partitions etc
3. My display adpater is not working as I have a 1600x900 screen and I can only go up to 1024x768...
View 8 Replies
View Related
Oct 8, 2011
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies
View Related
Apr 1, 2012
I recently installed windows 7 home premium 64 bit, previous OS was Vista home premium 32 bit. My desktop is an HP pavilion d4650y. I have the OS loaded on my main HD which is a SATA.
HD & DVD drive worked perfectly before on vista. I tested both devices on another pc with XP and they work fine. I've triple checked the connections but still the devices are not recognized by Windows 7. I've also tried renaming the HD & changing the drive letter, but still no luck.
Both drives are connected to a PCI E card, and are set to cable select, on separate cables. In the BIOS both drives show up. In disk management they do not show up at all.
My HD is a western digital 250 gb EIDE, and the DVD drive is a IDE Pioneer DVD burner (secondary disc drive).
View 5 Replies
View Related
