How To Get Raid Drivers On To Machine Without Floppy Drive
May 17, 2011
I am installing Windows 7 pro 32 bit on a machine with no floppy drive.The mobo is Asus p5b and intel e6600 core 2 duo cpu.how can i get raid drivers on to machine without floppy drive.can i use usb pendrive? or can i install driver after i have installed Windows 7 pro?
I've been noticing after re-installing Win 7 that I get random floppy drive seeks and the hard drive light flashes like crazy and then everything is fine again.I have Clamwin AV,Spyware Blaster and Spybot S&D installed,but that's it,no Windows Defender or Essentials AV.Any ideas what causes this? It's a minor annoyance,but I just want to make sure it's not damaging anything.Also would Readyboost help me? I've got 2 gigs dual channel PC3200 ram(or I could go with 2.5 gig single channel PC2700)and a P4 at 3 gig until I can afford to upgrade my comp.This is my first post in quite awhile so I hope this is in the right place
I've got a floppy drive A: installed on my computer, but of-course, i don't have no floppy drive, how do i get rid of this problem (im using windows 7 RC).
Answer:-
Go into your BIOS and set it to disable the floppy controller. The BIOS will tell Windows (any version of Windows) that a floppy drive is present, even if none is hooked up, if the floppy controller is enabled.
The bios is detecting all of them but Windows 7 is not. The floppy's power is on all the time and it is enabled in the bios. My 3rd hard drive is not being detected, however I did delete some windows 7 files and it was working before that. And I have no idea about my dvd drive. My other drive is working though.
I'm trying to run a game from a floppy disk that I used on Windows 95 on Windows 7. But I get an error message saying its not compatible with my version of windows. Any ideas on how I can make it work?
Answer:-
Set up a virtual machine of Windows 98 (preferably 98 SE) using something like VirtualBox (ensure you have a copy of Windows 98 handy as well...). Install and play from there.
I require a 3.5 inch floppy drive on my computer. However, whenever I select it in explorer, it starts to read the disk, then says it's not formatted, or puts up a please insert disk notice.
If your not going to use a Floppy Drive in your Computer you can disable it and ger rid of the Floppy Drive icon that sits in my computer.
Right click on my computer and select properties. In the hardware tab select 'Device Manager'. In the device manager there should be an expandable menu labelled 'Floppy disk controllers', expand this and you should see something like 'Standard floppy disk controller' right click on this and click disable. If at some time you do need to use a Floppy Drive you can re-able it.
I have a WDC USB floppy drive. One day day ago when i connected my floppy to PC it worked. When i connected it to other computer it not worked and then when i connected it to my PC again it's not working. When i connect floppy it says nothing. I tried to update disk drivers with Computer Management and it says that my drivers are up to date. I tried to uninstall drivers and than install it again and that's not working. BIOS and Computer Management can see the floppy drive, but Win Explorer can't see floppy. What should i do to access my floppy and my files?
For some reason my USB floppy drive is not found or recognized in Win 7 64 bit, it was working but not anymore. Can't find it in Computer Management-Disk Management but it is listed in Devices and shows no conflicts.
Has anyone else had trouble using a USB floppy drive in Windows 7? The drive does not appear in My Computer, I have tried troubleshooting the device, uninstalling it and re-installing it and trying to install other drivers to resolve the issue (windows will not accept others as it already has the best driver apparently...). I'm at a loss now I have even tried using drivermax to correct the problem but even that does not recognise the device.To ensure it wasn't an issue with the Floppy drive itself I have even tried using another, with the same result.
for some unknown reason my Floppy drive runs very, very slow on 64bit Windows 7. Takes about a minute to open an office XL file, and longer to close it... a lot longer. Even after the file is closed, the floppy light is still on an clicking, like it's reading the disc still. The drive itself is OK. I've got XP Pro on the same PC and the floppy is like lightning on XP. Also tried updating drivers, but it says it's got the best drivers available, and that it's working OK. So what the heck is it?
My Floppy Drive has the drive letter assignment (A). I would rather have it be (F). The traditional way to change drive letters is under disk management on right-click of My Computer. However, Floppy drives are not visible in the list. How can I change the letter?
I was having no problems with my Windows 7 X64 bit till I plugged in a USB floppy and copied some photos to the hard drive. The windows portion of the boot went to approx 5 times what it was. I have disabled all the boot devices except the hard drive and have uninstalled the driver that Windows 7 installed when I plugged in the floppy.Runs fine after the boot.
anyways, my main drive is a RAID 0 with Vista x64, but I have a second HD that is a SATA 250GB, which I installed Windows 7 on. The only way I could get install to work was to switch my BIOS to IDE mode rather than RAID. I would of course though, like to be able to access my Vista drive from Windows 7 (and more importantly, not have to switch between IDE/RAID mode at all in the BIOS, it's a pain).
Now, the one odd this about this all is that the drivers I have for Vista (x86/x64 drivers) for this mobo's RAID controller WORK when loaded on installation to identify and install to the drive, but seem to not load or not work in any way once the first reboot on install occurs. Maybe this is because I installed from within Vista x64, though.
(Incedentally, my motherboard is an M3A Asus, using ATI's SB600 for a RAID controller)
I've tried loading the drivers from within Windows 7 while in IDE mode, but the install program won't let me. At first it didn't allow because of version restrictions, but then I altered the ini file to get around that, but it encounters some sort of error when installing and quits.
Any help that can be offered, would be grateful. I realise it's a beta and not a real release, so I can get past the BSOD from my odd setup, and I really am enjoying playing around with it so far. Very very impressed.
Edit: Just in case anyone thinks of suggesting me to right-click the inf file and install that way, already tried, won't allow for it.
I an unable to make my floppy drive work on my new computer with windows 7 64 bit. I know there is a card made in England named Catweasel that is supposed to do the job, but they are hard to come by.
Background: I have a WinXP desktop machine with a hard drive that may have a virus/trojan/rootkit/etc. Normal scans on the WinXP machine with MSE or ThreatFire have not discovered the problem. But the best way to scan a drive is to remove it and treat it as a purely 'dummy' data drive plugged into a usb drive dock and run the scan from a clean machine. This way any infected programs and/or O.S. on the drive will have no control to mask or hide themselves. My other computer is an HP Windows 7 laptop. So I removed the hard drive from the WinXP machine and via the USB drive dock and the Windows 7 laptop saw the WinXP drive icon appear. However, double-clicking that icon results in the popup window message[CODE]
I am planning to set up RAID but cannot figure out if I need to load drivers at install of the OS or not. Does anyone know if you need to install the driver or not? I guess I could do it just in case...it's for a GA-EP45-UD3P Gigabyte. I guess this pic confirms I have on board RAID support right?
I had to sign up to find this but here is the "checklist" for anyone with the same question.
I've read several forum threads on this, but am still having trouble. I have win 7 32bit RC up and running for a long time on a 500 gig WD. Bought two 1Ts for a raid 0. I have the RAID chosen correctly in the BIOS, and the utility works fine. At the clean install for either 64 or 32 bit, I try to choose the drivers which I have downloaded from Intel and Asus, and tried to use the Vista drivers off my P5Q install disk, and still, Win 7 does not recognize the drive.
I have been home building and using computers for the past 25 years and I guess technology has gotten way over my hobbiest head. I have tried the USB flash drive route and I doesn't work either. Please, I know of the F8 workaround for unsigned drivers, but that doesn't work either. So, how are people raiding Win 7 at clean install?
Second question, is there a good tutorial at technet.com (which I can't find there) or someother place that tells step by step how to raid under disk manager in win 7?
I've just installed Windows 7 RC build 7100 onto my system. As always like with Vista installations in the past, I run into this problem. I have a DFI Lanparty NF4 Ultra-D motherboard and for some reason my RAID drive doesn't show up. I can see the two HDs I have set up as a raid appear and separate individual drives under My Computer but can't access them unless I format them which is something I dont want to do. I checked under Device Manager and under Stoare Controllers, NVIDIA nForce RAID Controller is installed...but I think I'm missing the proper RAID tool? I'm not too sure about this.
My Device Manager lists everything as installed, but each time I restart my computer and boot up, the computer is trying to install some drives but "Failed." The prompt says, "Standard Dual Channel PCI IDE Controller" x3, and all 3 Failed to install. I have no idea if this is the actual problem because I'm trying to get my RAID Stripe to work and they are both on SATA connections and not IDE...I have tried a few sets of nForce packs such as Fernandos_XP_64bit_nForce4-5_non-AHCI_WHQL_PACK_v5.4 but no avail.
I want to install window 7 64 bit on my Dell XPS M2010 and configure Raid 0. Where can I get the drivers to burn to a disk, so that I can load drivers in the Windows 7 Custom to do a "clean" install?
Before I can install windows I have to upload the RAID drivers for my motherboard. There's 2 folders x86 and x64. I want x64, except only the x86 drivers will load. Even when I click "Load drivers that aren't compatible." the x64 drivers don't show up. I have used the x64 RAID drivers from the disk I was given with the MOBO and I have tried the drivers directly from the ASRock website. Oh, and I've checked both the x64 folders. url...
I recently built a computer with only one drive, I was wondering if it is possible to install another one and have them runing on raid 0 or do you suggest another type of raid maybe with 3 drives.
I have an asus mobo p5q3 so I can use Drive Xpert technology but a lot of reviews says that the speed of the drives is split in two when using these 2 sata connection (white and orange).
I just purchased a new 10,000 RPM VelociRaptor drive and I'm going to use it as my OS drive. Is it possible to set up a RAID 0 with my current drive (hitachi 1TB 7200RPM) without having to format it?
I am doing a quick windows build here on a couple of computers and want to RAID 1 the windows C drive. The motherboard i got for them does not support RAID (I kinda figured it would). So now i was thinking of just doing a software RAID in windows. I got the C drive to mirror each other in disk management but the issue seems to be booting. When the computer starts it asks which hard drive i want to boot from and when i simulate hard drive failure the boot manager doesn't come up at all and i am stuck with the no boot device error. My guessing is that there is something on the 100MB system partition that isn't copying over.
Just putting together a list for my new October build for the Windows 7 launch and am going to go with a "Raid 1" set up using 2x wd caviar black 1tb drives.
I have not gone down the raid route before but understand that raid drivers needed to be loaded by floppy during installation.
I was hoping not to have to buy a floppy drive so wanted to know if in Windows 7 USB support was available during install to allow raid drivers to be installed from a mem stick when prompted??
I want to install windows 7 64 bit on my system which has a raid array. My motherboard is an Asus M3A78-T and my CPU is an AMD Phenom 9950 Agena 2.6GHz Quad-Core Black Edition.
I have 3 driver onmy compute. which worked as 1 when playing games ex. got a virus o the shop cleanedor me.Btwo driver wrks at a time. And i need all 3working to play games. pc worldused to do it bu not ay more.