I've read several forum threads on this, but am still having trouble. I have win 7 32bit RC up and running for a long time on a 500 gig WD. Bought two 1Ts for a raid 0. I have the RAID chosen correctly in the BIOS, and the utility works fine. At the clean install for either 64 or 32 bit, I try to choose the drivers which I have downloaded from Intel and Asus, and tried to use the Vista drivers off my P5Q install disk, and still, Win 7 does not recognize the drive.
I have been home building and using computers for the past 25 years and I guess technology has gotten way over my hobbiest head. I have tried the USB flash drive route and I doesn't work either. Please, I know of the F8 workaround for unsigned drivers, but that doesn't work either. So, how are people raiding Win 7 at clean install?
Second question, is there a good tutorial at technet.com (which I can't find there) or someother place that tells step by step how to raid under disk manager in win 7?
I have 3 driver onmy compute. which worked as 1 when playing games ex. got a virus o the shop cleanedor me.Btwo driver wrks at a time. And i need all 3working to play games. pc worldused to do it bu not ay more.
So like half the world I got RTM from MSDN yesterday, with hopes of installing today. Well for the past 10 hours I have been trying to get this OS installed on a Asus M4A79T Deluxe motherboard with the AMD SB750 RAID drivers and unfortunately I have come upon some woes that I hope you all might be able to shed some light on.In the RC the drivers were not present, as is the case with the current RTM, the process I would have to go thorough is as follows: 1. Click Next at the Language select screen 2. Click Install Now at the Install screen 3. Accept Terms and Next 4. Choose Custom install 5. It is at this point where I run into the lack of a driver with the RC, no drives are listed at theWhere do you want to install Windows?screen. 6. Click Load Driver 7. A message box pops up indicating To install the device driver needed to access your hard drive, insert the installation media containing the driver files, and then click OK.It is at this time that I click Browse 8. The browse for folder menu pops up and I navigate to my USB drive (have used a CD in the past) and select the AMD AHCI Compatible RAID Controllerand click Next At this point everything is good, the driver gets loaded and I continue on my merry way with the install of the RC.
The RTM, however, is much, much different: 1. Click Next at the Language select screen 2. Click Install Now at the Install screen 3. (unlike the RC, no terms yet) It is at this point where I run into the lack of a driver with the RTM, thus a Load Driver popup comes up indicating A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash device please insert it now. This is similar to what happened in step 7 above. It is at this time that I insert my USB key and click Browse 4. The browse for folder menu pops up and I navigate to my USB drive (have used a CD in the past) and select the AMD AHCI Compatible RAID Controllerand click Next 5. About five minutes of time and I receive the following error: No new devices could be found. Make sure that the driver files are correct and located on the driver installation media.Excuse me...what? The drivers are right there! I have them highlighted! So I click OK on the error popup and choose Browse again to repoint to the driver....but wait...WHAT? WHAT WHAT WHAT? All of my drives on the RAID controller are now showing up in the Browse box, indicating that the driver has been loaded!No matter how many times I try and click Next (not that clicking it a bunch of times is going to change anything) I cannot proceed in the install.
So then I thought, that maybe I can't install the RAID drivers from within the OS. So I caused the BSOD on purpose once again, and then with ICH10R RAID activated and Samsung hard disks attached, I choose the Windows 7 Recovery mode in the boot menu. It sees some problem(s), tries to repair, does not succeed and does not ask for drivers (which I put on a USB stick) to install. I also tried to use the command-line in the recovery: "rundll32 syssetup, SetupInfObjectInstallAction DefaultInstall 128 iaStor.inf" but it gave "Installation failed."
So I'm clueless how should I proceed. Do I really need to re-install Windows 7 and load RAID drivers in the Win7 setup? I don't want to install any OS on the RAID, the Windows 7 is and will be on the SSD. I just want to have a RAID-1 backup using those two hard disks.
anyways, my main drive is a RAID 0 with Vista x64, but I have a second HD that is a SATA 250GB, which I installed Windows 7 on. The only way I could get install to work was to switch my BIOS to IDE mode rather than RAID. I would of course though, like to be able to access my Vista drive from Windows 7 (and more importantly, not have to switch between IDE/RAID mode at all in the BIOS, it's a pain).
Now, the one odd this about this all is that the drivers I have for Vista (x86/x64 drivers) for this mobo's RAID controller WORK when loaded on installation to identify and install to the drive, but seem to not load or not work in any way once the first reboot on install occurs. Maybe this is because I installed from within Vista x64, though.
(Incedentally, my motherboard is an M3A Asus, using ATI's SB600 for a RAID controller)
I've tried loading the drivers from within Windows 7 while in IDE mode, but the install program won't let me. At first it didn't allow because of version restrictions, but then I altered the ini file to get around that, but it encounters some sort of error when installing and quits.
Any help that can be offered, would be grateful. I realise it's a beta and not a real release, so I can get past the BSOD from my odd setup, and I really am enjoying playing around with it so far. Very very impressed.
Edit: Just in case anyone thinks of suggesting me to right-click the inf file and install that way, already tried, won't allow for it.
I am planning to set up RAID but cannot figure out if I need to load drivers at install of the OS or not. Does anyone know if you need to install the driver or not? I guess I could do it just in case...it's for a GA-EP45-UD3P Gigabyte. I guess this pic confirms I have on board RAID support right?
I had to sign up to find this but here is the "checklist" for anyone with the same question.
I've just installed Windows 7 RC build 7100 onto my system. As always like with Vista installations in the past, I run into this problem. I have a DFI Lanparty NF4 Ultra-D motherboard and for some reason my RAID drive doesn't show up. I can see the two HDs I have set up as a raid appear and separate individual drives under My Computer but can't access them unless I format them which is something I dont want to do. I checked under Device Manager and under Stoare Controllers, NVIDIA nForce RAID Controller is installed...but I think I'm missing the proper RAID tool? I'm not too sure about this.
My Device Manager lists everything as installed, but each time I restart my computer and boot up, the computer is trying to install some drives but "Failed." The prompt says, "Standard Dual Channel PCI IDE Controller" x3, and all 3 Failed to install. I have no idea if this is the actual problem because I'm trying to get my RAID Stripe to work and they are both on SATA connections and not IDE...I have tried a few sets of nForce packs such as Fernandos_XP_64bit_nForce4-5_non-AHCI_WHQL_PACK_v5.4 but no avail.
I want to install window 7 64 bit on my Dell XPS M2010 and configure Raid 0. Where can I get the drivers to burn to a disk, so that I can load drivers in the Windows 7 Custom to do a "clean" install?
Before I can install windows I have to upload the RAID drivers for my motherboard. There's 2 folders x86 and x64. I want x64, except only the x86 drivers will load. Even when I click "Load drivers that aren't compatible." the x64 drivers don't show up. I have used the x64 RAID drivers from the disk I was given with the MOBO and I have tried the drivers directly from the ASRock website. Oh, and I've checked both the x64 folders. url...
I have W7 installed, works fine. I bought 2 HDDs and wanna add them just as data disk and set up as RAID1. If I set up RAID in bios, Windows crashes when loading with classic blue screen + restart. Is there any way to make it work (install some driver etc.) or do I have to reinstall Windows with RAID set up prior to Windows installation? I have Asus P7P55D-E board.
I want to slick my drive and do a clean install of the RC version. I currently have a Raid 0 configuration on 2 additional drives (not the OS drive) using the Asus P6T on-board controller. Will that Raid be preserved and thus the data as well? What is the best way to accomplish this with the least amount of angst?
I want to set up a raid 0 during the install for my c partition on Win 7 can this be done? If not what I will do is install on a parition on one drive and then after I have installed set up some stripped partition and hack the registery and change the locations of the Windows folder to be on the stripped partitions after copying them of course. This is just not a very nice way of doing it. My mobo doesn't support hardware raid so that is why I am trying to implement software raid and I have a second hardrive.
I have install xp on raid striped but when i try to install win 7 the driver i have are not the correct ones i have a dfi lanparty tu p45 t3rs mb and two wd 500gb hdd. i have looked around but cant find any others anything i can do or anone know where i can get driver
Just putting together a list for my new October build for the Windows 7 launch and am going to go with a "Raid 1" set up using 2x wd caviar black 1tb drives.
I have not gone down the raid route before but understand that raid drivers needed to be loaded by floppy during installation.
I was hoping not to have to buy a floppy drive so wanted to know if in Windows 7 USB support was available during install to allow raid drivers to be installed from a mem stick when prompted??
I want to install windows 7 64 bit on my system which has a raid array. My motherboard is an Asus M3A78-T and my CPU is an AMD Phenom 9950 Agena 2.6GHz Quad-Core Black Edition.
My PC is currently using a single RAID 0 drive that contains my Windows install and all my data in a single partition C: (I'm well backed up so happy with the risk of RAID0)
The RAID0 drive is setup by my motherboard controller so Windows just sees the one drive.
I am thinking of adding an separate drive for windows, hopefully an SSD. I would like to do a fresh install of Windows 7 on the new disk then rename the old RAID0 drive to something different such as D: . Then reorganise it into just a data disk.
My question is.. will the new Windows 7 installation just see the old RAID0 disk as another disk? I know this would work witha normal disk, but does RAID0 transfer over to a new installation ok?
MOBO = Gigabyte x58a-ud5 I just got 2 SSDs I'm trying to put in RAID0 and hopefully clone my current install. When I change the bios settings to set the intel RAID controlled to xhd and raid but try to boot from my windows installation it wont boot, it gets to ''starting windows'' and then BSOD. When I turn the RAID setup off and try to install the XHD drivers the install aborts saying ''this is not a RAID setup". Is there something I can do to get the drivers installed on my current setup then clone it to the RAID drives?
I got this problem and cannot solve it myself for over a month, ANY advice will be appreciated! The goal is Windows 7 64bit with RAID0.
1. Windows XP 32bit installs fine on RAID0 (with proper driver integrated)
2. Windows 7 64bit and Vista 64bit installs fine on single drive.
3. Windows 7 64bit and Vista 64bit on RAID0 give BSOD 0x000000F4 during completing installation stage, then Matrix Storage manager shows RAID0 ERROR OCCURRED.
EDIT:
4. Windows Vista 32bit won't install on raid setup too. Its not the case with 64bits
I tried everything I could think of:
1. exchanged both hard drives
2. tested RAM
3. tried install with minimum pheripherals and 1GB RAM
4. messed up with BIOS, even updated to latest beta bios
5. tried installing intel vista64 raid drivers, tho windows 7 has itself
6. RMA'd my DVD Drive
and still NO GO
E7200 || Abit IP35 Dark Rider || A-Data 4GB || 4850 || X-Fi Gamer || Samsung F1 RAID0 || Pioneer DVR-212 || Corsair VX450 || HP w2207h
I would like to get 2 SSDs and put them into a raid array using Windows 7-64bit, but wanted to make sure I understand how to do that. The 2 SSDs will be the only drives in the system. My computer has an X58 motherboard with an ICH10R. Here is what I think is the correct procedure: Boot into the bios. Set the storage config to RAID (the other choices are IDE and AHCI) Reboot and hit Cntrl-I to get into raid menu during boot. Set up the raid array in the setup screen. Reboot to the Windows 7 install CD and install Windows Is this correct? Are there any other steps I need or tips I should be aware of?
i want to change my existing install too raid0 i currently have install/programs on one 1tb drive and media/games on another 1tb drive, i have a spare 2tb drive unusedwhat are your suggestions so i reduce the amount of lost programs etc
I'm trying to do a fresh install of windows 7 and it wont recognize my hard drives. I've done some research and determined i need the correct drivers, but i don't know which ones. I'm trying to install them on 3 WD3000HLFS in RAID 0. The HDD are plugged into SATA 6 ports( only 2 SATA 3 ports on the mobo).
I have been trying to get windows 7 Ultimate 64 bit installed onto a raid I created with two ocz agility 3 ssds. Everytime I try loading the drivers at install it gives me an error stating the drivers are unsigned and to install a 32 bit OS. When installing a 32 but OS, the install works normal and the computer runs fine. I am just wondering why it wont install for 64 bit considering I would much rather run 64 bit. I went to both the MoBo's website and the main companys website for the chipset drivers (AMD) but have both turned up with the same error.
Anyone managed to find Windows 7 compatiable drivers for "GigaRAID ITE8212 IDE RAID controller"?
I tried using the Vista drivers in compatibilty mode but no luck unfortunately. Issue being is that my 2nd internal hard drive is not showing up in My Computer however it is listed in device manager. This is the only item left in device manager that isnt installed properly :-(
I checked my motherboard drivers page @ GIGABYTE - Product - Motherboard - Specification - GA-8I955X Pro but they only have Vista drivers listed.
I've been trying to find the drivers suitable for Windows SEVEN. I need it to use a couple of hdd in pair with RAID configuration. Before anything :I tried the RAID with VISTA64 and worked perfectly so I don't need to set that part in bios..etc..
So now it's SEVEN turn... I simply can't find the drivers... it says that they are not signed by microsoft so they can't be used.
I was trying with some controller RAID drivers from other MB...newer versions but I haven't found any good luck by far.
This is my first post but after searching the internet trying to find RAID drivers to work with 64-bit Windows 7 when using an Asus M3A motherboard, or another model using the ATI SB600 RAID driver, I have discovered a lot of people are having an issue and are having to use IDE emulation mode.
I was lucky to stumble across this post on the AMD forums with a working driver: AMD Game Forums - SB600 RAID driver for Windows 7
If this driver ever gets removed I will keep a copy, please send me a message on this forum and I'll email it to you, it works!
Several people have suggested downloading combinations of drivers or forcing the use of older ones, but this one does work straight away, no hassle.
I am installing Windows 7 pro 32 bit on a machine with no floppy drive.The mobo is Asus p5b and intel e6600 core 2 duo cpu.how can i get raid drivers on to machine without floppy drive.can i use usb pendrive? or can i install driver after i have installed Windows 7 pro?
I've been running the RC for around 3 months now and love it. I didn't have any issues when I installed it. I added the drivers for my raid card when the select partition option came up, it installed them and away it went. Now that I'm trying to install the retail version it insists that my drivers are unsigned and that's the end of that.
I've tried using the repair system work around to get the drivers loaded; but that option says that the drivers don't match my installed hardware. I'm using the exact same driver I used for the RC, on the same thumb drive in fact. Plus, Promise says they're signed. I know there isn't a problem with the raid card because I'm on the system now. Anybody have any ideas?
I have a Dell XPS M2010 that I recently changed to 64 bit running Windows 7. Since I have had the computer there have been issues with the display driver not responding but when I check for updates, it says best driver is already downloaded. Not a day passes by when the display crashes and recovers on the average of at least 5 times.There has to be another driver that will work for this thing but I am not having any luck finding it. Can someone please tell me how to fix this issue
Biggest bottleneck in my system right now is my boot drive, which is a WD velociraptor. I want to change this for dual 120GB SSD's in Raid 0 configuration. Can anyone walk me through the steps to copy over the existing Win7 64 install onto the SSD's, I dont want to have to load everything again
