Asus M3A / ATI SB600 / ATI Chipset RAID Drivers 64-bit
Dec 30, 2009
This is my first post but after searching the internet trying to find RAID drivers to work with 64-bit Windows 7 when using an Asus M3A motherboard, or another model using the ATI SB600 RAID driver, I have discovered a lot of people are having an issue and are having to use IDE emulation mode.
I was lucky to stumble across this post on the AMD forums with a working driver:
AMD Game Forums - SB600 RAID driver for Windows 7
If this driver ever gets removed I will keep a copy, please send me a message on this forum and I'll email it to you, it works!
Several people have suggested downloading combinations of drivers or forcing the use of older ones, but this one does work straight away, no hassle.
View 0 Replies
ADVERTISEMENT
Nov 25, 2009
I've been trying to find the drivers suitable for Windows SEVEN. I need it to use a couple of hdd in pair with RAID configuration. Before anything :I tried the RAID with VISTA64 and worked perfectly so I don't need to set that part in bios..etc..
So now it's SEVEN turn... I simply can't find the drivers... it says that they are not signed by microsoft so they can't be used.
I was trying with some controller RAID drivers from other MB...newer versions but I haven't found any good luck by far.
View 0 Replies
View Related
Jan 6, 2009
anyways, my main drive is a RAID 0 with Vista x64, but I have a second HD that is a SATA 250GB, which I installed Windows 7 on. The only way I could get install to work was to switch my BIOS to IDE mode rather than RAID. I would of course though, like to be able to access my Vista drive from Windows 7 (and more importantly, not have to switch between IDE/RAID mode at all in the BIOS, it's a pain).
Now, the one odd this about this all is that the drivers I have for Vista (x86/x64 drivers) for this mobo's RAID controller WORK when loaded on installation to identify and install to the drive, but seem to not load or not work in any way once the first reboot on install occurs. Maybe this is because I installed from within Vista x64, though.
(Incedentally, my motherboard is an M3A Asus, using ATI's SB600 for a RAID controller)
I've tried loading the drivers from within Windows 7 while in IDE mode, but the install program won't let me. At first it didn't allow because of version restrictions, but then I altered the ini file to get around that, but it encounters some sort of error when installing and quits.
Any help that can be offered, would be grateful. I realise it's a beta and not a real release, so I can get past the BSOD from my odd setup, and I really am enjoying playing around with it so far. Very very impressed.
Edit: Just in case anyone thinks of suggesting me to right-click the inf file and install that way, already tried, won't allow for it.
View 0 Replies
View Related
Jun 2, 2011
I have a problem with migration from AHCI to RAID on existing win 7 x64. I had AHCI HDD connected to marvell SATA 6gbit controller. I wanted to create RAID 0 on intel controller (ICH10) I created hdd image in acronis. Enabled RAID in bios and Created RAID 0 disk (2 x hdd) Restored from image to new raid hdd . When I try to boot win i get blue screen . error 0x0000007B ( so win cant recognize hdd)When I boot from win CD installer have access to raid disk what shall I do? I my opinion system doesn't have access to raid drivers. (maybe missing registry entries) i system32/drivers i have file iastor.sys but probably there is no registry entries how to add registry entries to system? How can I boot system??? ( in rescue mode windows also doesn't start)
View 4 Replies
View Related
Jun 28, 2012
I have the above motherboard, which chipset should I be intalling please, INF chipset or Chipset Intel IAA?
View 9 Replies
View Related
Sep 2, 2010
I bought a PC with a ASUS P6T Deluxe motherboard a month or so ago and installed Windows 7 Ultimate to a SATA drive.When the machine boots up it goes through the process of initialising the onboard RAID controller then looking for drives to boot from RAID - of which there aren't any.Also in Device Manager I have a RAID controller showing under Other Devices as 'not installed'.Can I disable RAID in the BIOS to speed up booting as I don't need it at present (or do I???)?
View 7 Replies
View Related
Dec 26, 2009
I have an Asus P6T SE Motherboard with 6gb RAM, Core I7 etc and 3 x Samsung 1.5tb disks. Purchased specifically for RAID config. I wish to RAID 0 2 of the disks and then use the third to back up data.
I initially set up the rig with RAID 5, it was a disaster for me (using the built in Intel sotrage manager) as I had a slight error and it was still rebuilding the array some 3 days later so I decided to cut my losses and go to RAID 0.
The problem I now have is that despite Windows 7 seeming to install correctly, when it comes to the reboot section (just before 'completing installation) the machine cannot find a bootable device!!! I am removing the USB key at this stage to stop it from starting all over again.
it reports 'reboot and select proper device, or select boot media etc'
I have already tried
- Destroying and rebuilding the array with different sizes in case Windows 7 struggles with large boot partitions
- Resetting BIOS to defaults
Even reverting to an IDE set up and this still wont boot!
Can you help guys, I cant see how the PC could have been corrupted at a pre OS level that would stop the disks from working as I have configured. But nothing would surprise me.
View 4 Replies
View Related
Nov 28, 2009
I have a computer I built using an ASUS MB A8N-SLI Premium card. This card is a was purchased in 2007 and is one having two RAID chipsets. The first is a NVIDA and the second is a Silicon Image. The OS was XP Professional.
When I set up to install Windows 7 Professional Upgrade, I found that a) there were no ASUS drivers for Windows 7 and the "generic" Nvida and SII Raid drivers would not work with this ASUS card. So, says I, lets try and see if the VISTA drivers will be accepted by Windows 7... Nope.. Win 7 error says "can't find any drivers compatible with your hardware". OK.. So..
I have to buy a completely new motherboard.. I chose the Gigabyte MA790GPT-UD3H with AMD Phenom II Quad-Core 3ghz CPU. The M B is excellent with dual output video for two CRTs, and all the I/O I needed including IEEE1394 port for my FlexRadio.. But I get ahead of myself! So.. Let the buyer of Windows 7 be aware that he should check his MB and insure that Windows 7 drivers are available for his particular model. Otherwise, upgrading to Windows 7 can be more expensive than you planned!
View 2 Replies
View Related
Nov 21, 2009
Just bought Asus M4A78-EM AMD780 with AMD Phenom X4 9750.
I am using TSD 500AAKS Western Digital Caviar 500GB and a WD2500JB IDE
Ultra 2048DD2 8Gb Memory and Cyberlink Optical Drive
Am unable to create a RAID with the Optical Drive in slot 1 and the WD500GB in slot 2. sometimes the machine fines the disk drive, sometimes it does not, it never fines the WD500GB.
I was able to install windows7-64 on the IDE disk but the program does not boot - did not restart when it finished installing.
Anybody has an idea?
The latest problem I am getting the message Secondary Master ATAPI incompatible. Going crazy with this, so far as i know the disk drive worked perfectly until now. Where can the problem reside?
View 2 Replies
View Related
Sep 1, 2009
How to setup RAID 0 with an Asus CG5290-BP007?
I bought an Asus Desktop CG5290-BP007 at best buy, when I opened it says RAMPAGE II GENE/CG5290/DP MB
Asus CG5290
motherboard: Rampage II Gene Micro Atx
Processor: Intel I7 920 (2.66 Ghz)
Ram: 9GB
HD: Seagate 1TB 7200 RPM
Windows Vista Home Premium 64
If you want to see the link here it is: http://www.bestbuy.com/site/olspage.jsp?skuId=9366642&type=product&id=1218092150864
I removed the Seagate and I put 2 WD Velociraptors 300 GB each and 10,000 RPM, I have a concern, one it is on the port 1 and the other velociraptor is on port 3.
Does it affect in order to make appear the RAID option in the bios? Because it does not appear, it just appears these options: IDE and AHCI. How come it does not appear RAID in the bios options?
What am I doing wrong? Or what do I have to do in order to setup in the bios as RAID?
I don’t know if this link below it is exactly my motherboard, it seems that my desktop came a little bit different than this motherboard or they designed specially just for best buy, I am not sure about it.
http://usa.asus.com/product.aspx?P_ID=6i86Hj0lGriFHfY9
I took several pictures to show you what appears when I turn on the computer and when press <Del> to enter in the bios and when I just turn on the computer and I don’t do anything.
I went to Asus website and I downloaded the manual for Rampage II Gene Motherboard, I was reading it and It says that Intel Matrix Storage Manager option Rom utility will appear when I press CTRL + I , I tried it several times and nothing happens, is that option working in my Asus Desktop CG5290-BP007 ?
Please help me what to do, I would like to install Windows 7, my hard disks are not formatted I think so, because I just installed them and I am not able to see RAID in the bios options, Please tell what steps to follow in order to setup RAID 0 in this computer.
View 8 Replies
View Related
Dec 23, 2010
Ive been trying for 3 days now to install a clean os on a raid 0 setup. I can get the array setup in the bios np, but when it comes time to actually install the os i can't. Reason being i cannot for the life of me find a raid driver that is signed by windows>< The south chip is sb700.
View 6 Replies
View Related
Nov 26, 2009
I need Download SATA Raid Mother ASUS A7N8X-E Deluxe, for Windows 7 Ultimate.
Answer:-
http://support.asus.com/download/download.aspx?SLanguage=en-us
So go to the above link of Asus website and download it? If there are no Windows 7 specific drivers available, download the Vista drivers.
View 2 Replies
View Related
Sep 26, 2011
So I just recently decided to do a RAID 0 configuration on my ASUS M4A89GTD with two 1 tb drives. I first set the Raid controller to the raid 0 setting and added my two drives. The raid manager reported back the raid 0 drive was healthy and working fine.
I proceeded to go through with a fresh windows 7, 64-bit install. The install goes fine but when the computer boots up to load windows 7, it hits a blue screen and instantly restarts. Over and over again.
I think I tracked down the issue to a rogue registry entry. Apparently there is an entry called iaStorV that causes the drivers.sys file to not load the drivers correctly, causing a blue screen error.
Things ive tried: Using ubuntu off a cd. Didn't work because the chntpw doesn't know how to mount a raid 0 drive Regedit bootloading programs, dont work because they dont know how to deal with a raid drive Regedit in the system restore command prompt. Doesn't work because it's version doesn't match windows 7
View 7 Replies
View Related
Dec 21, 2012
I have a Asus Xonar DG audio device, but no sound. No sound at all. When I go to my device manager, yellow exclamation points are on my Asus Xonar and on RAID controller. Asus says driver is current. AMD High Def audio device is not disabled, should it be? If I disable it would I have sound? I have to listen to 4 hrs of video for work so I have to have sound back up asap.
View 1 Replies
View Related
Nov 27, 2009
I'm trying to install updated chipset drivers. I downloaded nForce 680i SLI from the nvidia website. When I run install, it asks me to select what I want to install and gives only 2 choices: nvidia ethernet driver, and nvidia storage driver. Those aren't the chipset drivers, are they?
View 1 Replies
View Related
Sep 29, 2011
What is the best chipset drivers for my p5g41c-m lx?
View 1 Replies
View Related
Sep 7, 2009
Just find your product and chose Windows 7 RC x86 or x64(works with RTM too)
Intel chipset link for Windows 7 OS is here!
Current official version for chipset's 3 series and up is: 9.​​1.​​1.​​1025
These drivers are compatible with Windows 7 RC and RTM
View 9 Replies
View Related
Sep 2, 2012
I have a Dell workstation (Precision 670) with a single Xeon Irwindale 3.4 GHz and I installed windows 7 x64. I am ok with all of my devices, some drivers are windows 7, my wireless adaptor is a vista driver that works fine, and the rest are Microsoft generic (chipset etc). I tried to intsall the latest intel inf using -OVERWRITE but it didn't update anything from the E7525 related devices. I know this chipset is old but its the first time that a Windows 7 instalation gives me worst benchmarks compared to XP even with generic chipset drivers.Anyway the thing I would like to ask is if anyone knows in what OS did they stop the support for E7525, so if it is Vista I could try to use the Vista drivers in some way... Intel gives no info, they just have one single file for 5 OS's and 40 chipsets
View 2 Replies
View Related
Oct 22, 2009
right direction for the chipset drivers for Intel 945 Express?On the intel site I have found this link but it only appears to be available for the RC version. � INF Update Utility - Primarily for Intel® 5, 4, 3, 900 Series Chipsets?
View 7 Replies
View Related
Jan 28, 2009
Just wondering if anyone else is using this chipset and what drivers you are using?
EDIT: i advise not to try the xp drivers they messed up my install, i am using the ones supplied with win update but im sure something is missing, in my device manager it has a unknown pci device, i don't have this in xp on the same machine...??
View 4 Replies
View Related
Sep 8, 2012
finally my new computer rig arrived today, but my problem is the store has already installed everything on it including windows 7 ulitmate and its intel drivers etc.. the problem is they used the DVD that comes with the motherboard so its an old drivers being installed in my desktop.. how to update this drivers? intel chipset drivers, realtek HD audio etc? i have already downloaded before hand the drivers for it, but i dont know how to install this when they have alread
View 6 Replies
View Related
Nov 14, 2012
I am trying to install an update to my x79 chipset drivers but everytime I run the exe it tells me drivers successfully installed though when I check in device manager they are still the old version and I do not get the installation screen (bars loading and progress) before it went to successfully installed. what I should do to get it to work. Firewall was disabled when I tried.
View 7 Replies
View Related
Jan 10, 2009
I'm running Windows 7 on an Emachines t2862, which has an Intel Integrated Chipset (845g, "Itel Extreme Graphic", specifically).
I've tried installing the XP drivers using the installation as well as the tutorial floating around the forums for installing XP graphic drivers. Both caused Windows to crash shortly after booting. I had plenty of time to open a few programs, but about 45 seconds after booting, Windows simply freezes (mouse included).
I had to boot into safemode and roll the driver back to the standard VGA driver to fix it.
Does anybody have any tips?
View 9 Replies
View Related
Nov 13, 2009
Using ASUS P5K-E motherboard which I bought in 2007. and I just installed Windows 7 Ultimate.
When I run the Chipset Drivers Installation CD into my drive, it shows this (attached JPG)
It should be compatibility problem between the drivers softwares and the OS version...any solution?
View 3 Replies
View Related
Nov 20, 2012
I need a driver that will work with win7 on compaq dc5100 the screen saver will not work
View 1 Replies
View Related
Sep 30, 2011
I read various posts on different area's regarding chipset installation and drivers.Some info : motherboard is Microstar p45 platinum gamer series.it comes with 2 sets of cd's #1 for win xp intel chipset drivers&utilities disk.#2 chipset disk for vista.question #1 does windows 7 64bit (pro) contain the sata drivers and all the utilities for install ? or do i need to utilize the preinstall of the f6 and make a install floppy? msi has a section for downloads I have searched for the uptodate drivers listed in the arcive section where my board is now listed. am a bit confused as to how i am going to install win 7 on this system .I may go with a xp/7 duel boot .I want to add raid 5 after 7 install and i know xp could not see anything beyond raid 0 or 1.ooking for some advice before i start the process.I hope the thread title is better this time.if the install sequence works the way i want it to go ; perhaps i can create a tuit.
View 9 Replies
View Related
Jan 4, 2012
I searched now for a while in google and on the intel web pages where I can download the newestIntel core i5-2400 Chipset driver for 64bit Win7andIntel core i5-2400 VGA driver for 64bit Win7I found only specification here: Intel CoreDoes anyone know the exact URL where these drivers are downloadable?
View 4 Replies
View Related
Dec 18, 2011
915 motherboard intel support chipset motherboard sound, vga, usb drivers download
View 1 Replies
View Related
Jun 27, 2009
I am planning to set up RAID but cannot figure out if I need to load drivers at install of the OS or not. Does anyone know if you need to install the driver or not? I guess I could do it just in case...it's for a GA-EP45-UD3P Gigabyte. I guess this pic confirms I have on board RAID support right?
I had to sign up to find this but here is the "checklist" for anyone with the same question.
View 8 Replies
View Related
Jan 4, 2010
I've read several forum threads on this, but am still having trouble. I have win 7 32bit RC up and running for a long time on a 500 gig WD. Bought two 1Ts for a raid 0. I have the RAID chosen correctly in the BIOS, and the utility works fine. At the clean install for either 64 or 32 bit, I try to choose the drivers which I have downloaded from Intel and Asus, and tried to use the Vista drivers off my P5Q install disk, and still, Win 7 does not recognize the drive.
I have been home building and using computers for the past 25 years and I guess technology has gotten way over my hobbiest head. I have tried the USB flash drive route and I doesn't work either. Please, I know of the F8 workaround for unsigned drivers, but that doesn't work either. So, how are people raiding Win 7 at clean install?
Second question, is there a good tutorial at technet.com (which I can't find there) or someother place that tells step by step how to raid under disk manager in win 7?
View 4 Replies
View Related
Apr 28, 2009
I've just installed Windows 7 RC build 7100 onto my system. As always like with Vista installations in the past, I run into this problem. I have a DFI Lanparty NF4 Ultra-D motherboard and for some reason my RAID drive doesn't show up. I can see the two HDs I have set up as a raid appear and separate individual drives under My Computer but can't access them unless I format them which is something I dont want to do. I checked under Device Manager and under Stoare Controllers, NVIDIA nForce RAID Controller is installed...but I think I'm missing the proper RAID tool? I'm not too sure about this.
My Device Manager lists everything as installed, but each time I restart my computer and boot up, the computer is trying to install some drives but "Failed." The prompt says, "Standard Dual Channel PCI IDE Controller" x3, and all 3 Failed to install. I have no idea if this is the actual problem because I'm trying to get my RAID Stripe to work and they are both on SATA connections and not IDE...I have tried a few sets of nForce packs such as Fernandos_XP_64bit_nForce4-5_non-AHCI_WHQL_PACK_v5.4 but no avail.
View 5 Replies
View Related
