AMD790/SB600 RAID Controller Drivers
Nov 25, 2009
I've been trying to find the drivers suitable for Windows SEVEN. I need it to use a couple of hdd in pair with RAID configuration. Before anything :I tried the RAID with VISTA64 and worked perfectly so I don't need to set that part in bios..etc..
So now it's SEVEN turn... I simply can't find the drivers... it says that they are not signed by microsoft so they can't be used.
I was trying with some controller RAID drivers from other MB...newer versions but I haven't found any good luck by far.
View 0 Replies
ADVERTISEMENT
Dec 30, 2009
This is my first post but after searching the internet trying to find RAID drivers to work with 64-bit Windows 7 when using an Asus M3A motherboard, or another model using the ATI SB600 RAID driver, I have discovered a lot of people are having an issue and are having to use IDE emulation mode.
I was lucky to stumble across this post on the AMD forums with a working driver:
AMD Game Forums - SB600 RAID driver for Windows 7
If this driver ever gets removed I will keep a copy, please send me a message on this forum and I'll email it to you, it works!
Several people have suggested downloading combinations of drivers or forcing the use of older ones, but this one does work straight away, no hassle.
View 0 Replies
View Related
Jan 6, 2009
anyways, my main drive is a RAID 0 with Vista x64, but I have a second HD that is a SATA 250GB, which I installed Windows 7 on. The only way I could get install to work was to switch my BIOS to IDE mode rather than RAID. I would of course though, like to be able to access my Vista drive from Windows 7 (and more importantly, not have to switch between IDE/RAID mode at all in the BIOS, it's a pain).
Now, the one odd this about this all is that the drivers I have for Vista (x86/x64 drivers) for this mobo's RAID controller WORK when loaded on installation to identify and install to the drive, but seem to not load or not work in any way once the first reboot on install occurs. Maybe this is because I installed from within Vista x64, though.
(Incedentally, my motherboard is an M3A Asus, using ATI's SB600 for a RAID controller)
I've tried loading the drivers from within Windows 7 while in IDE mode, but the install program won't let me. At first it didn't allow because of version restrictions, but then I altered the ini file to get around that, but it encounters some sort of error when installing and quits.
Any help that can be offered, would be grateful. I realise it's a beta and not a real release, so I can get past the BSOD from my odd setup, and I really am enjoying playing around with it so far. Very very impressed.
Edit: Just in case anyone thinks of suggesting me to right-click the inf file and install that way, already tried, won't allow for it.
View 0 Replies
View Related
Apr 28, 2009
I've just installed Windows 7 RC build 7100 onto my system. As always like with Vista installations in the past, I run into this problem. I have a DFI Lanparty NF4 Ultra-D motherboard and for some reason my RAID drive doesn't show up. I can see the two HDs I have set up as a raid appear and separate individual drives under My Computer but can't access them unless I format them which is something I dont want to do. I checked under Device Manager and under Stoare Controllers, NVIDIA nForce RAID Controller is installed...but I think I'm missing the proper RAID tool? I'm not too sure about this.
My Device Manager lists everything as installed, but each time I restart my computer and boot up, the computer is trying to install some drives but "Failed." The prompt says, "Standard Dual Channel PCI IDE Controller" x3, and all 3 Failed to install. I have no idea if this is the actual problem because I'm trying to get my RAID Stripe to work and they are both on SATA connections and not IDE...I have tried a few sets of nForce packs such as Fernandos_XP_64bit_nForce4-5_non-AHCI_WHQL_PACK_v5.4 but no avail.
View 5 Replies
View Related
Sep 24, 2009
Anyone managed to find Windows 7 compatiable drivers for "GigaRAID ITE8212 IDE RAID controller"?
I tried using the Vista drivers in compatibilty mode but no luck unfortunately. Issue being is that my 2nd internal hard drive is not showing up in My Computer however it is listed in device manager. This is the only item left in device manager that isnt installed properly :-(
I checked my motherboard drivers page @ GIGABYTE - Product - Motherboard - Specification - GA-8I955X Pro but they only have Vista drivers listed.
View 2 Replies
View Related
Nov 19, 2011
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when loaded up and i have the latest rst drivers installed..did this prior to the os install on the ssd. using the x58 e760a1 mobo. under device manager, the raid controller has an exclamation mark and no driver installed yet i have the latest rst 10.8.0.1003 installed..
View 1 Replies
View Related
Aug 12, 2012
Which configuration would be better using mobo sats 2 raid or using seperate rid controller via pcie card Rosewill Rc-211 wsis3132) or should I use mobo for raid and card for extra sata w/o raid I have more drives than sata slots. How do I transfer data videos/Tv shows from existing drive to raid?
View 1 Replies
View Related
Jul 24, 2009
I was recently deploying Windows 7 on an older PC(not too old) and in the upgrade proccess it said setup could not continue and rolled back my upgrade. I suspect that it is because of the raid, because it stopped in the middle of the expanding files stage.
The driver version on there is 1.0.0.62, which I believe is the most recent for vista, so can I rule this out as a reason. Theres 50GB free for upgrade.
View 6 Replies
View Related
Nov 5, 2009
I am trying to upgrade from Windows Vista 32 bit to Windows 7 32 bit but when booting from the upgrade disk it has problems finding my HDD's and says that windows cannot be installed on them once found.
When choosing a clean install from loading the disk from within Vista it starts to install and then when it restarts it brings up a blue screen saying that windows cannot be installed and is I have installed any new HDD's or controllers then on uninstall them.
When trying to upgrade at first it was complaining about the ATI ACHI Compatable RAID controller not being compatable but now it starts to do the install and then on restart it does the same as the clean install.
View 9 Replies
View Related
Jun 25, 2009
So I installed the Windows Seven RC x64 today on my desktop machine after having a great experience on my notebook.
Most things worked out just fine, but the onboard raid controller is giving me alot of trouble (I got two hard disks connected there, should be raid0?), my mainboard is a Gigabyte GA-P35-DS3 an this is SiSoft Sandras report on my disk controllers:
Browsing this forum I found severel interesting posts, for example I tested the drivers of Driver and I tried the mainboard drivers for Vista in compatibility mode, but nothing works. I also looked for the "ITE IT8212 ATA RAID Controller" drivers directly, but there was nothing concerning Windows Seven. After that I tried the Released: Intel Chipset Software 9.1.1.1014 but that still did not solve anything.
View 6 Replies
View Related
Nov 2, 2012
I can't seem to find the RAID controller driver for my other system. Can anyone tell me a good site to find such driver?
View 2 Replies
View Related
Jun 19, 2012
I have a W7 64 bit machine and I am trying to update the RAID controller driver without success.I am blocked by W7 from updating the driver and get the "Windows has determined that the best driver is already installed" message.I have tried to work around that and have been unsuccessful.Ultimately I am trying to enable a program "Hard Disk Sentinel" to view and display hard disk SMART info. Unfortunately the RAID driver controlling the HDD's on my PC have a date signature of 2009 and need to be updated to take advantage of SMART information technology
View 3 Replies
View Related
Nov 24, 2009
Does anyone know where I might find the 64 bit ".inf" drivers for Windows 7 64 bit?
View 3 Replies
View Related
Mar 23, 2011
I am going to be getting 2 new WD10EALS drives in the next day or so. My plan was to put them in raid using the onboard ICH10R controller on my mobo (an ASUS Sabertooth X58). I had wanted to run WDTLER to turn TLER on, but after reading some reviews it seems I might not be able to as it is reported WD disabled TLER on these drives completely.
Im curious if there is a way to change the timeout for the drives in the matrix storage controller? So if I do have an issue my raid won't die (I'll be using these drives in raid 0 for gaming only). I dont care about the data, I just don't want to have to go thru the hassle of reinstalling the games should a drive get dropped from the array. I am thinking about getting a wd green 2tb drive for backups but just curious if there is a way to change timeout via the controller.
edit: And by change timeout I mean how long the controller waits for the disk before dropping it from the array, like could i set it too 2.5 mins just to be sure?
View 1 Replies
View Related
Jun 4, 2012
My win 7 machine boots perfectly with two SATA mirrored drives and a Promise Ultra 133 TX2 IDE controller card with no drives attached. But when I connect drives to either IDE1 or IDE2, the machine will not even get to win start up.
View 1 Replies
View Related
Dec 18, 2012
How can I uninstall a Gigabyte raid contoller without crashing my Win 7 OS? Uninstall is being prevented because "the OS is on the contoller"! Win 7 64 bit is on a Crucial SSD boot drive and AHCI is set in BIOS. However the raid controller is setting all internal drives to SCSI!
View 1 Replies
View Related
Apr 9, 2011
I am using an Asus P6T Deluxe V2 motherboard and Windows 7 Professional. I am having a problem with my external (esata) disk drive being recognized by the OS. It used to work and now it don't?? During boot up I see the drive in the bios messages on my screen. Also when I look in device manager it shows the drive and says this device is working properly. However, when I click on "computer" its not there and no software program such as backup finds the drive either. I have tried uninstalling the drive in device manager and then rebooting. No luck? I am not sure when it quit working or why. Its not the drive as I have tried more than one and they are recognized when used in the USB port. I have uninstalled the Marvell 61xx RAID controller in the device manager also but no change?
View 10 Replies
View Related
Dec 21, 2012
I have a Asus Xonar DG audio device, but no sound. No sound at all. When I go to my device manager, yellow exclamation points are on my Asus Xonar and on RAID controller. Asus says driver is current. AMD High Def audio device is not disabled, should it be? If I disable it would I have sound? I have to listen to 4 hrs of video for work so I have to have sound back up asap.
View 1 Replies
View Related
Nov 21, 2012
I want download Ethernet controller and net work controller drivers
View 2 Replies
View Related
Jun 18, 2012
My Toshiba Satillite L655-s5153 Laptop doesn't reconize the ethernet port when I plug in my wireless router to the ehternet port. How can this be fixed? I have no internet connection.
View 1 Replies
View Related
Jun 22, 2012
I am looking for these drivers. I have a Sony Vaio desktop that I upgraded from Vista 32bit to Windows 7 64bit. The model is VGC-LT32E.
View 7 Replies
View Related
Oct 28, 2011
I have a J & W H61M-D3 (B3) motherboard with an Core i3 2100,4 gig DDr3 ram.Windows 7 professional 64 bit Im despritly looking for the drivers for pci simplecommunications controller and SM bus controller
View 2 Replies
View Related
Aug 10, 2010
Very little, all the parts were shipped here about four days ago and I spent a couple of hours putting them together. I ran into a hiccup when Windows 7 Home Premium would not get past the extracting phase of the installation, kicking up the error in this thread. I began the first install on a 20GB partition, when that failed I tried just installing it on a single partition. When that failed I tried removing all the partitions and just installing on the unformatted drive, in it's entirety (seemed weird but others said they had luck with this).Testing Methodology:
At the end of each attempted solution I tried to install Windows again.My keyboard is a USB keyboard. All of my boot testing is done with a bootable USB that I have running MS-DOS 6.22. What I Have Tried:Solution 1: First I went into the bios and changed the SATA controller from AHCI to Raid SATA Result = FAILEDSolution 2: I tried burning OEM Windows disk from Microsoft to an iso at the lowest speed possible for my DVD burner (4x).Result = FAILEDSolution 3: At this point I had created and deleted so many partitions I was concerned it may be having an effect on the install. So I went to Samsung's website and grabbed their HDD utility tool. I figured let's kill two birds with one stone and test the drive while also restoring it to it's original state. So I did a low level format and then ran the HDD diagnostic. All came back with no errors. Result = FAILED
On to memory...Solution 4: I downloaded Microsoft's Memory Diagnostic Tool and let it run overnight. It returned no errors. So I decided to use MemTest86 4.1 and let it run for 10 passes, I did find errors then. As of now I am running each module of memory one by one to determine if it is a problem with them or the sockets on the motherboard. So far I have been unable to reproduce the errors I got when both modules were running together. As a precaution I double checked the motherboards specifications on the socket order for memory, all is to specs. Result = [PENDING]What's Next:After my current memory test ends, I plan on checking my BIOS to see if the correct memory speeds were detected in the auto detection. If at that point I'm still unable to reproduce the memory errors, I'll put both memory modules back into the system and run the testing again to see if I can reproduce the errors I got the first time.
View 9 Replies
View Related
May 7, 2011
i purchased a Silicon SiI3512 SATA Raid Controller purely to have 2 extra SATA ports which I am using to connect to my case's external drive bays. I have flashed the bios of the controller and updated the driver to put it in "Base" mode so it is not using RAID. I did extensive research on this and it appears that I have this part right. For now, I am trying to connect a WD1600BEVT 2.5" SATA-II hard drive to one of these ports and am having some difficulty. I can see the drive, but when I try to format the drive in Windows, or a command prompt (using the windows recovery DVD) it hangs. I am wondering if this is a compatibility issue with a SATA-II drive on a SATA-I controller, however, most of the forums I have read state that if there is a compatibility issue, the controller won't even recognize the drive. I searched around to see if there was a way to force the HDD to SATA(150), but the jumpers on this drive are for SSC and RPS. Is there a way to fix this or do I need a drive that is capable of forcing SATA-I speeds? Perhaps even a controller capable of at least SATA-II since that is the minimum of all new HDDs?
View 5 Replies
View Related
Jun 27, 2009
I am planning to set up RAID but cannot figure out if I need to load drivers at install of the OS or not. Does anyone know if you need to install the driver or not? I guess I could do it just in case...it's for a GA-EP45-UD3P Gigabyte. I guess this pic confirms I have on board RAID support right?
I had to sign up to find this but here is the "checklist" for anyone with the same question.
View 8 Replies
View Related
Jan 4, 2010
I've read several forum threads on this, but am still having trouble. I have win 7 32bit RC up and running for a long time on a 500 gig WD. Bought two 1Ts for a raid 0. I have the RAID chosen correctly in the BIOS, and the utility works fine. At the clean install for either 64 or 32 bit, I try to choose the drivers which I have downloaded from Intel and Asus, and tried to use the Vista drivers off my P5Q install disk, and still, Win 7 does not recognize the drive.
I have been home building and using computers for the past 25 years and I guess technology has gotten way over my hobbiest head. I have tried the USB flash drive route and I doesn't work either. Please, I know of the F8 workaround for unsigned drivers, but that doesn't work either. So, how are people raiding Win 7 at clean install?
Second question, is there a good tutorial at technet.com (which I can't find there) or someother place that tells step by step how to raid under disk manager in win 7?
View 4 Replies
View Related
Dec 23, 2009
I want to install window 7 64 bit on my Dell XPS M2010 and configure Raid 0. Where can I get the drivers to burn to a disk, so that I can load drivers in the Windows 7 Custom to do a "clean" install?
View 5 Replies
View Related
Jan 4, 2012
Before I can install windows I have to upload the RAID drivers for my motherboard. There's 2 folders x86 and x64. I want x64, except only the x86 drivers will load. Even when I click "Load drivers that aren't compatible." the x64 drivers don't show up. I have used the x64 RAID drivers from the disk I was given with the MOBO and I have tried the drivers directly from the ASRock website. Oh, and I've checked both the x64 folders. url...
View 4 Replies
View Related
Jun 11, 2009
My first post here, and I was just wondering if there was a way to integrate raid drivers in my windows 7 installation CD?
View 9 Replies
View Related
Aug 21, 2009
Just putting together a list for my new October build for the Windows 7 launch and am going to go with a "Raid 1" set up using 2x wd caviar black 1tb drives.
I have not gone down the raid route before but understand that raid drivers needed to be loaded by floppy during installation.
I was hoping not to have to buy a floppy drive so wanted to know if in Windows 7 USB support was available during install to allow raid drivers to be installed from a mem stick when prompted??
View 4 Replies
View Related
Mar 8, 2010
I want to install windows 7 64 bit on my system which has a raid array. My motherboard is an Asus M3A78-T and my CPU is an AMD Phenom 9950 Agena 2.6GHz Quad-Core Black Edition.
View 4 Replies
View Related