Before I can install windows I have to upload the RAID drivers for my motherboard. There's 2 folders x86 and x64. I want x64, except only the x86 drivers will load. Even when I click "Load drivers that aren't compatible." the x64 drivers don't show up. I have used the x64 RAID drivers from the disk I was given with the MOBO and I have tried the drivers directly from the ASRock website. Oh, and I've checked both the x64 folders. url...
View 4 Repliesanyways, my main drive is a RAID 0 with Vista x64, but I have a second HD that is a SATA 250GB, which I installed Windows 7 on. The only way I could get install to work was to switch my BIOS to IDE mode rather than RAID. I would of course though, like to be able to access my Vista drive from Windows 7 (and more importantly, not have to switch between IDE/RAID mode at all in the BIOS, it's a pain).
Now, the one odd this about this all is that the drivers I have for Vista (x86/x64 drivers) for this mobo's RAID controller WORK when loaded on installation to identify and install to the drive, but seem to not load or not work in any way once the first reboot on install occurs. Maybe this is because I installed from within Vista x64, though.
(Incedentally, my motherboard is an M3A Asus, using ATI's SB600 for a RAID controller)
I've tried loading the drivers from within Windows 7 while in IDE mode, but the install program won't let me. At first it didn't allow because of version restrictions, but then I altered the ini file to get around that, but it encounters some sort of error when installing and quits.
Any help that can be offered, would be grateful. I realise it's a beta and not a real release, so I can get past the BSOD from my odd setup, and I really am enjoying playing around with it so far. Very very impressed.
Edit: Just in case anyone thinks of suggesting me to right-click the inf file and install that way, already tried, won't allow for it.
I am planning to set up RAID but cannot figure out if I need to load drivers at install of the OS or not. Does anyone know if you need to install the driver or not? I guess I could do it just in case...it's for a GA-EP45-UD3P Gigabyte. I guess this pic confirms I have on board RAID support right?
I had to sign up to find this but here is the "checklist" for anyone with the same question.
I've read several forum threads on this, but am still having trouble. I have win 7 32bit RC up and running for a long time on a 500 gig WD. Bought two 1Ts for a raid 0. I have the RAID chosen correctly in the BIOS, and the utility works fine. At the clean install for either 64 or 32 bit, I try to choose the drivers which I have downloaded from Intel and Asus, and tried to use the Vista drivers off my P5Q install disk, and still, Win 7 does not recognize the drive.
I have been home building and using computers for the past 25 years and I guess technology has gotten way over my hobbiest head. I have tried the USB flash drive route and I doesn't work either. Please, I know of the F8 workaround for unsigned drivers, but that doesn't work either. So, how are people raiding Win 7 at clean install?
Second question, is there a good tutorial at technet.com (which I can't find there) or someother place that tells step by step how to raid under disk manager in win 7?
I've just installed Windows 7 RC build 7100 onto my system. As always like with Vista installations in the past, I run into this problem. I have a DFI Lanparty NF4 Ultra-D motherboard and for some reason my RAID drive doesn't show up. I can see the two HDs I have set up as a raid appear and separate individual drives under My Computer but can't access them unless I format them which is something I dont want to do. I checked under Device Manager and under Stoare Controllers, NVIDIA nForce RAID Controller is installed...but I think I'm missing the proper RAID tool? I'm not too sure about this.
My Device Manager lists everything as installed, but each time I restart my computer and boot up, the computer is trying to install some drives but "Failed." The prompt says, "Standard Dual Channel PCI IDE Controller" x3, and all 3 Failed to install. I have no idea if this is the actual problem because I'm trying to get my RAID Stripe to work and they are both on SATA connections and not IDE...I have tried a few sets of nForce packs such as Fernandos_XP_64bit_nForce4-5_non-AHCI_WHQL_PACK_v5.4 but no avail.
I want to install window 7 64 bit on my Dell XPS M2010 and configure Raid 0. Where can I get the drivers to burn to a disk, so that I can load drivers in the Windows 7 Custom to do a "clean" install?
View 5 Replies View RelatedMy first post here, and I was just wondering if there was a way to integrate raid drivers in my windows 7 installation CD?
View 9 Replies View RelatedJust putting together a list for my new October build for the Windows 7 launch and am going to go with a "Raid 1" set up using 2x wd caviar black 1tb drives.
I have not gone down the raid route before but understand that raid drivers needed to be loaded by floppy during installation.
I was hoping not to have to buy a floppy drive so wanted to know if in Windows 7 USB support was available during install to allow raid drivers to be installed from a mem stick when prompted??
I want to install windows 7 64 bit on my system which has a raid array. My motherboard is an Asus M3A78-T and my CPU is an AMD Phenom 9950 Agena 2.6GHz Quad-Core Black Edition.
View 4 Replies View RelatedI have 3 driver onmy compute. which worked as 1 when playing games ex. got a virus o the shop cleanedor me.Btwo driver wrks at a time. And i need all 3working to play games. pc worldused to do it bu not ay more.
View 1 Replies View RelatedAnyone managed to find Windows 7 compatiable drivers for "GigaRAID ITE8212 IDE RAID controller"?
I tried using the Vista drivers in compatibilty mode but no luck unfortunately. Issue being is that my 2nd internal hard drive is not showing up in My Computer however it is listed in device manager. This is the only item left in device manager that isnt installed properly :-(
I checked my motherboard drivers page @ GIGABYTE - Product - Motherboard - Specification - GA-8I955X Pro but they only have Vista drivers listed.
I've been trying to find the drivers suitable for Windows SEVEN. I need it to use a couple of hdd in pair with RAID configuration. Before anything :I tried the RAID with VISTA64 and worked perfectly so I don't need to set that part in bios..etc..
So now it's SEVEN turn... I simply can't find the drivers... it says that they are not signed by microsoft so they can't be used.
I was trying with some controller RAID drivers from other MB...newer versions but I haven't found any good luck by far.
This is my first post but after searching the internet trying to find RAID drivers to work with 64-bit Windows 7 when using an Asus M3A motherboard, or another model using the ATI SB600 RAID driver, I have discovered a lot of people are having an issue and are having to use IDE emulation mode.
I was lucky to stumble across this post on the AMD forums with a working driver:
AMD Game Forums - SB600 RAID driver for Windows 7
If this driver ever gets removed I will keep a copy, please send me a message on this forum and I'll email it to you, it works!
Several people have suggested downloading combinations of drivers or forcing the use of older ones, but this one does work straight away, no hassle.
I am installing Windows 7 pro 32 bit on a machine with no floppy drive.The mobo is Asus p5b and intel e6600 core 2 duo cpu.how can i get raid drivers on to machine without floppy drive.can i use usb pendrive? or can i install driver after i have installed Windows 7 pro?
View 3 Replies View RelatedSo like half the world I got RTM from MSDN yesterday, with hopes of installing today. Well for the past 10 hours I have been trying to get this OS installed on a Asus M4A79T Deluxe motherboard with the AMD SB750 RAID drivers and unfortunately I have come upon some woes that I hope you all might be able to shed some light on.In the RC the drivers were not present, as is the case with the current RTM, the process I would have to go thorough is as follows: 1. Click Next at the Language select screen 2. Click Install Now at the Install screen 3. Accept Terms and Next 4. Choose Custom install 5. It is at this point where I run into the lack of a driver with the RC, no drives are listed at theWhere do you want to install Windows?screen. 6. Click Load Driver 7. A message box pops up indicating To install the device driver needed to access your hard drive, insert the installation media containing the driver files, and then click OK.It is at this time that I click Browse 8. The browse for folder menu pops up and I navigate to my USB drive (have used a CD in the past) and select the AMD AHCI Compatible RAID Controllerand click Next At this point everything is good, the driver gets loaded and I continue on my merry way with the install of the RC.
The RTM, however, is much, much different: 1. Click Next at the Language select screen 2. Click Install Now at the Install screen 3. (unlike the RC, no terms yet) It is at this point where I run into the lack of a driver with the RTM, thus a Load Driver popup comes up indicating A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash device please insert it now. This is similar to what happened in step 7 above. It is at this time that I insert my USB key and click Browse 4. The browse for folder menu pops up and I navigate to my USB drive (have used a CD in the past) and select the AMD AHCI Compatible RAID Controllerand click Next 5. About five minutes of time and I receive the following error: No new devices could be found. Make sure that the driver files are correct and located on the driver installation media.Excuse me...what? The drivers are right there! I have them highlighted! So I click OK on the error popup and choose Browse again to repoint to the driver....but wait...WHAT? WHAT WHAT WHAT? All of my drives on the RAID controller are now showing up in the Browse box, indicating that the driver has been loaded!No matter how many times I try and click Next (not that clicking it a bunch of times is going to change anything) I cannot proceed in the install.
I've been running the RC for around 3 months now and love it. I didn't have any issues when I installed it. I added the drivers for my raid card when the select partition option came up, it installed them and away it went. Now that I'm trying to install the retail version it insists that my drivers are unsigned and that's the end of that.
I've tried using the repair system work around to get the drivers loaded; but that option says that the drivers don't match my installed hardware. I'm using the exact same driver I used for the RC, on the same thumb drive in fact. Plus, Promise says they're signed. I know there isn't a problem with the raid card because I'm on the system now. Anybody have any ideas?
I have a Dell XPS M2010 that I recently changed to 64 bit running Windows 7. Since I have had the computer there have been issues with the display driver not responding but when I check for updates, it says best driver is already downloaded. Not a day passes by when the display crashes and recovers on the average of at least 5 times.There has to be another driver that will work for this thing but I am not having any luck finding it. Can someone please tell me how to fix this issue
View 2 Replies View Related[code]...
So then I thought, that maybe I can't install the RAID drivers from within the OS. So I caused the BSOD on purpose once again, and then with ICH10R RAID activated and Samsung hard disks attached, I choose the Windows 7 Recovery mode in the boot menu. It sees some problem(s), tries to repair, does not succeed and does not ask for drivers (which I put on a USB stick) to install. I also tried to use the command-line in the recovery: "rundll32 syssetup, SetupInfObjectInstallAction DefaultInstall 128 iaStor.inf" but it gave "Installation failed."
So I'm clueless how should I proceed. Do I really need to re-install Windows 7 and load RAID drivers in the Win7 setup? I don't want to install any OS on the RAID, the Windows 7 is and will be on the SSD. I just want to have a RAID-1 backup using those two hard disks.
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when loaded up and i have the latest rst drivers installed..did this prior to the os install on the ssd. using the x58 e760a1 mobo. under device manager, the raid controller has an exclamation mark and no driver installed yet i have the latest rst 10.8.0.1003 installed..
View 1 Replies View RelatedI need a PCI SATA 6 RAID card that has at least 4 slots for 4 X 2TB Hard drives for a RAID 5
View 3 Replies View RelatedI had one hard drive failed(640gb). I bought replacement and tried to restore image but it failed. Then I wanted to convert to non raid system. I changed both drives(640gb) to non raid and bios change in advance setup. I am getting error when I try to reinstall win 7, "setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information". I have deleted old partition many times but win 7 setup on this dell xps435 desktop won't install windows.
View 4 Replies View RelatedI have tried to find the way to do this, but without success as I cannot see the wood for the trees.
I have a mature Windows 7 system, with so many applications loaded that rebuilding from scratch is just not an option. I have a 300MB Velociraptor wholly given over to the OS and another empty 300MB VR. I want to extend, that may not be the right word, my OS to use both disks in Raid 0.
Which configuration would be better using mobo sats 2 raid or using seperate rid controller via pcie card Rosewill Rc-211 wsis3132) or should I use mobo for raid and card for extra sata w/o raid I have more drives than sata slots. How do I transfer data videos/Tv shows from existing drive to raid?
View 1 Replies View RelatedI have Win 7 Pro 64 bit installed on an ASUS P7P55D LE motherboard which supports RAID 0,1,5 and 10 using Intel Matrix Storage Technology through an on board Intel P55 chip set. The system was assembled in Nov 2009 using two Western Digital Caviar Black 750Gb drives in RAID 1 as Drive C:. (I now know from Western Digital Customer Service that I shouldnt have done that, but lets move on from there). Last December, an error message informed me the RAID array was broken and identified one of the 750 Mb drives as needing replacement. I happened to have a spare 1.5Tb WD Caviar Black at the time, so I pulled the 750Mb drive and replaced it with the 1.5Tb drive. Life was once again good. Then on July 4th (wouldnt you know) there was a repeat of the December 2011 error message telling me to replace the other original 750Gb drive. Okay so I had another 1.5Tb WD Caviar Black laying around (dont ask) and did a similar swap out. Thats when I emailed WD Customer Support asking about the 750 since their diagnostic software said the drives were fine. Thats when I learned that I should be paying lots more for enterprise quality drives if I want/need RAID. Well thats not what ASUS says in their advertising, but live and learn. All thats prologue, because my real question is whether its possible to break the hardware-based RAID 1 array and set up a Windows 7-based RAID 1 with the two 1.5Tb WD Caviar Black drives without having to reinstall Windows 7.
View 1 Replies View RelatedI am currently attempting to install Windows 7 on an SSD RAID Array, and I have encountered several issues (this has been a one step forward, two steps backward affair). The issue that I am currently facing is the fact that I am unable to load RAID drivers during the OS installation.As is normal for this kind of installation I choose "Custom" and I cannot see any drives listed, this is the point at which I click on "Load Drivers" and then I select "Browse". My challenge is that regardless of how I "insert the drivers", which is to say whether I put them on a separate USB drive (FAT32 partitioned), or take the Windows 7 installation DVD out and insert a CD with drivers - I simply cannot navigate to the drivers.Because I am unable to load the RAID drivers I simply cannot proceed with the OS installation.*** Note ****As of writing this I came across a program called RT Seven Lite, which has allowed me to create a "slip streamed" Windows 7 installation - using the program I was able to integrate the troublesome drivers into the Windows 7 installation disk.
View -1 Replies View RelatedI am currently attempting to install Windows 7 on an SSD RAID Array, and I have encountered several issues (this has been a one step forward, two steps backward affair). The issue that I am currently facing is the fact that I am unable to load RAID drivers during the OS installation.
As is normal for this kind of installation I choose "Custom" and I cannot see any drives listed, this is the point at which I click on "Load Drivers" and then I select "Browse". My challenge is that regardless of how I "insert the drivers", which is to say whether I put them on a separate USB drive (FAT32 partitioned), or take the Windows 7 installation DVD out and insert a CD with drivers - I simply cannot navigate to the drivers.
Because I am unable to load the RAID drivers I simply cannot proceed with the OS installation.
As of writing this I came across a program called RT Seven Lite, which has allowed me to create a "slip streamed" Windows 7 installation - using the program I was able to integrate the troublesome drivers into the Windows 7 installation disk.
I have been trying, for the last 2 days, to install Win 7 (64 bit) to my Dell XPS 720. I performed the pre-install check and it reported no problems. As I was going from Vista 32 bit to Windows 7 64 bit I knew I would have to perform a clean install.
I have installed about 6 times over the last couple of days and the system seems fine for maybe 20 minutes at which point one of two things happens. either
1. it reboots after a brief blue screen message regarding BAD_POOL_HEADER (too quick to read)
2. it hangs and performs a dump with a BSOD regarding NVSTOR.SYS
I'm assuming that the problem is with the NVSTOR.SYS driver(s) for the motherboard NVIDIA RAID arrays. I have 4 disks in 2 RAID 0 arrays of a 1TB each.
Dell does not list the PC as Win 7 compatible and there are no Windows 7 64 bit RAID drivers listed although it does list Vista 64 bit drivers as a download. I have tried these but Windows 7 doesn't seem to want to update the driver saying I already have the latest drivers installed (from the Windows 7 DVD).
Anyone else had this problem and been able to cure it. I'm writing this from the PC with the 32 bit version installed and working fine. I need 64 bit to address the 8gb of memory for some very intensive video and photoshop work I do.
I tested al new driver from ati site but none worked on my x1600 512 mb
It failed to install the video driver.
Only one that worked was 9-1_vista32_dd_ccc_wdm_enu_74233 but has a few bugs:
Any other solution? Solved with 9.8 version driver !
I have an HP pavilion zv5000 laptop with the speakers on the front and the audio control buttons on the front and i have tried all the fixes i could find on other threads including: replacing the drivers from realteks website and making sure that the audio device is set to default. My?
is does anyone have any idea if there is another fix for this. I'm using the latest driver from realtek althouh i let windows try and fix it and it reverted back to the previous version. if anyone knows of a driver package that works for sure that would be great.
in the middle of listening to a song on spotify yeserday, the audio suddenly cut off and i got an error message on spotify saying "there is a problem with your sound card. spotify can't play music." and upon trying to listen to music on Internet and itunes, there was also no sound.however, when i change the volume on my screen or turn on/off stickykeys, the sound works. the volume buttons on my laptop do not work.i tried uninstalling my driver, and it has said (multiple times) that the driver is still installed, even after rebooting. when i try to reinstall, i get the error message 5006, with no error details. the driver is listed in my device manager, and it says it is functioning properly.
View 1 Replies View RelatedI switched on my computer this morning realizing there was no sound working. The little icon in the bottom right corner in the tray has a red "X" over it. When I go into device manager my Sound, Video and Game controllers is missing from the drop down list. There are two drivers on the list which have a yellow exclamation mark over it and whenever I try to update the drivers it doesn't work. I'm running Windows 7 64bit
View 1 Replies View Related