"Unable To Load RAID Drivers For Windows 7 Installation"
Nov 28, 2012
I am currently attempting to install Windows 7 on an SSD RAID Array, and I have encountered several issues (this has been a one step forward, two steps backward affair). The issue that I am currently facing is the fact that I am unable to load RAID drivers during the OS installation.
As is normal for this kind of installation I choose "Custom" and I cannot see any drives listed, this is the point at which I click on "Load Drivers" and then I select "Browse". My challenge is that regardless of how I "insert the drivers", which is to say whether I put them on a separate USB drive (FAT32 partitioned), or take the Windows 7 installation DVD out and insert a CD with drivers - I simply cannot navigate to the drivers.
Because I am unable to load the RAID drivers I simply cannot proceed with the OS installation.
As of writing this I came across a program called RT Seven Lite, which has allowed me to create a "slip streamed" Windows 7 installation - using the program I was able to integrate the troublesome drivers into the Windows 7 installation disk.
View 5 Replies
ADVERTISEMENT
Nov 29, 2012
I am currently attempting to install Windows 7 on an SSD RAID Array, and I have encountered several issues (this has been a one step forward, two steps backward affair). The issue that I am currently facing is the fact that I am unable to load RAID drivers during the OS installation.As is normal for this kind of installation I choose "Custom" and I cannot see any drives listed, this is the point at which I click on "Load Drivers" and then I select "Browse". My challenge is that regardless of how I "insert the drivers", which is to say whether I put them on a separate USB drive (FAT32 partitioned), or take the Windows 7 installation DVD out and insert a CD with drivers - I simply cannot navigate to the drivers.Because I am unable to load the RAID drivers I simply cannot proceed with the OS installation.*** Note ****As of writing this I came across a program called RT Seven Lite, which has allowed me to create a "slip streamed" Windows 7 installation - using the program I was able to integrate the troublesome drivers into the Windows 7 installation disk.
View -1 Replies
View Related
Jul 3, 2011
I am running windows 7 home edition. A couple months ago I got the bad image date virus that disable my google chrome and my epson workforce printer, I had found it disable my print spooler, I got rid the the virus, but it did more damage, I uninstalled the printer drivers and went through the windows services and set them all to automatic, but I cannot reinstall the driver.
Then I saw my graphics and sound drivers are out dated but I cannot update them either, it just times out when I try to update them. I noticed when I try to update other programs, they hang up on the system restore point, so I tried to create a new one. I get the shadow volume cannot be created message, I set the shadow volume services to automatic, and went through all the dependency's but I still can't create a restore point, I am guessing the problems are related
View 3 Replies
View Related
Jan 4, 2010
when i tried to install the software cd ripping software bonkenc
on my new windows 7 laptop i get this message
Unable to load ASPI drivers! CD ripping disabled
i followed this link
The BonkEnc Project - I get the message "Unable to load ASPI drivers! CD ripping disabled!"
as they said on the site when i google the problem but then i got confused.
because there are now windows 7 drivers here
Adaptec - Windows ASPI Package
are these drivers on my machine some where and windows just cant find them.
View 1 Replies
View Related
Jul 22, 2012
My computer is unable access my router. The power went out for a second and clearly that did something. I have an HP p7-1174 desk top, running Windows 7 Home Premium x64. The processor is an AMD A8-3800.
There are now several devices in the manager with yellow exclamation points, all relegated to the LAN. I get a Code 31, unable to load drivers message. I ran the sfc scan and there were no integrity violations. I tried updating drivers without any luck. My router is working fine because my laptop and iPad both work online.
The problem seems to be that Windows can't load the drivers for my 802.11n wireless LAN card. I tried updating drivers but it said the driver was up to date. I tried changing manually but the only two listed were the same and when I clicked one, it said Windows was unable to load.
View 1 Replies
View Related
May 30, 2010
How to load Windows 7 on scsi raid systems? the drives aint recognise i had to load sata drivers for my portege laptop m400 what drivers do i need? raid or scsi from dell? poweredge 1800/2800
View 6 Replies
View Related
Feb 15, 2012
Misunderstood a tech friend of mine and accidentally deleted both partitions when attempting to upgrade to windows 7. Now when I try to load the installation disc, it says there are no drivers anywhere and I'm unable to start the installation process. Is there somewhere I can download all new drivers?
View 10 Replies
View Related
Feb 18, 2010
- build a system with 1 WD1101FALS HDD and installed Windows 7 64 bit no problem. All was good for few days until I got a bug to set up a RAID 10.
- Went out bought 3 more of the same drives. All 4 drives are WD1101FALS 1TB.
- Set up the RAID 10 array on the ASUS motherboard, got the RAID drives for Win7 64bit on a USB key.
- Start install, no problem. Win7 asks for drivers, I click browse and select the drives from USB for the RAID. Install continues, files are copied, thing are flying, it's fast.
- Then 1st re-start
- Windows continues to install (finalizing things, registry update, etc).
- I get to 4 check marks on the Windows Install screen and then it goes into the last step "Completing Installation". The progress bar goes to about 80% complete and then
BLACK SCREEN, computer re-starts. Windows comes up with a message "The computer restarted unexpectedly or encountered an unexpected error. Windows installation can not proceed. etc.." It assks to press OK and and PC re-starts and the installation re-starts from scratch. I tried about 15 times, with different RAID drives, from XP to Vista, to Win7.
I have no clue what else I can try. Usually people have problem with the RAID drives but I have no problem with that step. The drivers are selected and seem to be working fine. The install almost completes.
Here are the images on how far along the install goes. The progress bar actually goes more than that, I just took a picture before the black screen.
View 5 Replies
View Related
Jan 1, 2012
I'm looking to move my Win 7 install from a RAID 0 (with two traditional HDs) to a new single SSD.
I have the new SSD installed in the computer and the system can see it fine. (In fact, I installed a trial copy of Win 7 and it boots up fine).
I'm not sure what's the best way for me to proceed. Do I make a disk image of the RAID partition with Acronis and restore it to the SSD? Any way I can set this up so I can keep my existing program files and installations?
View 2 Replies
View Related
Jan 6, 2009
anyways, my main drive is a RAID 0 with Vista x64, but I have a second HD that is a SATA 250GB, which I installed Windows 7 on. The only way I could get install to work was to switch my BIOS to IDE mode rather than RAID. I would of course though, like to be able to access my Vista drive from Windows 7 (and more importantly, not have to switch between IDE/RAID mode at all in the BIOS, it's a pain).
Now, the one odd this about this all is that the drivers I have for Vista (x86/x64 drivers) for this mobo's RAID controller WORK when loaded on installation to identify and install to the drive, but seem to not load or not work in any way once the first reboot on install occurs. Maybe this is because I installed from within Vista x64, though.
(Incedentally, my motherboard is an M3A Asus, using ATI's SB600 for a RAID controller)
I've tried loading the drivers from within Windows 7 while in IDE mode, but the install program won't let me. At first it didn't allow because of version restrictions, but then I altered the ini file to get around that, but it encounters some sort of error when installing and quits.
Any help that can be offered, would be grateful. I realise it's a beta and not a real release, so I can get past the BSOD from my odd setup, and I really am enjoying playing around with it so far. Very very impressed.
Edit: Just in case anyone thinks of suggesting me to right-click the inf file and install that way, already tried, won't allow for it.
View 0 Replies
View Related
Jun 29, 2010
I can't install my Windows Ultimate 64 bit edition on my RAID 0 Western Digital 500GB hdd's because on the boot screen my computer keeps telling me to "Reboot and select proper boot device or insert boot media in selected boot device", I've done both those instructions, rebooted, reinserted, all of it, no solution. I made sure my boot priority is the drive first, and raid drives after. Still nothing. But this is the interesting part, last time I fixed this problem by using my previous computers dvd drive to install instead of the blu ray, it installed and everything was right with the world.
But I have since then thrown out the old DVD drive, and now have nothing to install with. So what I did in the past hour was used a freinds DVD drive to install and it did not work. When my System Config, is set to RAID, it calls both my blu ray and his dvd drive, ATAPI CD, when in IDE, it calls my blue ray a blue ray and his dvd drive a dvd drive. I simply want to do a clean(custom) install of my windows 64 bit on my two RAID 0 HDDs, I've checked the boot priority, I've put both hdds in RAID0 and I've also used someone elses dvd dive to try and install.
View 1 Replies
View Related
Aug 14, 2010
I recently bought two ssds and striped them with my on board raid. Any ways i got windows 7 installed on it just fine ( after i got the driver issues worked out)But my problem is that I was looking forward to a fast boot time, but now every time i boot it go's to a screen that detects all of my storage devices.
View 7 Replies
View Related
Nov 28, 2009
I have a computer I built using an ASUS MB A8N-SLI Premium card. This card is a was purchased in 2007 and is one having two RAID chipsets. The first is a NVIDA and the second is a Silicon Image. The OS was XP Professional.
When I set up to install Windows 7 Professional Upgrade, I found that a) there were no ASUS drivers for Windows 7 and the "generic" Nvida and SII Raid drivers would not work with this ASUS card. So, says I, lets try and see if the VISTA drivers will be accepted by Windows 7... Nope.. Win 7 error says "can't find any drivers compatible with your hardware". OK.. So..
I have to buy a completely new motherboard.. I chose the Gigabyte MA790GPT-UD3H with AMD Phenom II Quad-Core 3ghz CPU. The M B is excellent with dual output video for two CRTs, and all the I/O I needed including IEEE1394 port for my FlexRadio.. But I get ahead of myself! So.. Let the buyer of Windows 7 be aware that he should check his MB and insure that Windows 7 drivers are available for his particular model. Otherwise, upgrading to Windows 7 can be more expensive than you planned!
View 2 Replies
View Related
Jul 23, 2010
after installation of linux mint 7 gloria when i tried to perfoam a new installation windows 7 cant't load drives as well as other operating system i tried
View 2 Replies
View Related
Jun 18, 2011
Cloned the 2 hdds to the single using Norton Ghost. It works fine and the PC boots no problem - but only if the bios (Asus) is set to 'configure sata as RAID'. If I change to 'configure sata as IDE' it won't boot (bsod during windows loading screen).
The PC clearly thinks the new, single hdd is still a raid system - which presumably could cause problems when I upgrade the mobo. I have tried Windows 7 repair, fixmbr, fixboot, rebuild bcd... none of it makes any difference!
View 9 Replies
View Related
May 22, 2011
when turning on the pc it comes up with a black screen and says windows error recovery,the starts doing a launch start up repair which doesnt seem to do anything
View 2 Replies
View Related
Jul 31, 2011
I turned on my computer and it says windows is unable to load it then it started to show start up repair and says the system is checking for problems. Idk wat to do, I was on it about an hour ago and it was just fine, but when I tried to turn in on this came up.
View 9 Replies
View Related
Jan 18, 2012
I am writing this after booting in "Safe mode with Networking". I am unable to load windows normally. As soon as the user login screen appears, the computer restarts.
View 1 Replies
View Related
Jan 19, 2013
I get message windows failed to start. a recent hardware or software change might be the cause. It tells me to load installation disk for windows 7 and then I get boot failure.
View 1 Replies
View Related
Aug 13, 2012
I have recently purchased a newer secondhand laptop. I have a word 7.0 disk but i am unable to load onto windows 7
View 2 Replies
View Related
Mar 8, 2010
I want to install windows 7 64 bit on my system which has a raid array. My motherboard is an Asus M3A78-T and my CPU is an AMD Phenom 9950 Agena 2.6GHz Quad-Core Black Edition.
View 4 Replies
View Related
Aug 23, 2012
I have 3 driver onmy compute. which worked as 1 when playing games ex. got a virus o the shop cleanedor me.Btwo driver wrks at a time. And i need all 3working to play games. pc worldused to do it bu not ay more.
View 1 Replies
View Related
Nov 2, 2012
I have a Dell XPS M2010 that I recently changed to 64 bit running Windows 7. Since I have had the computer there have been issues with the display driver not responding but when I check for updates, it says best driver is already downloaded. Not a day passes by when the display crashes and recovers on the average of at least 5 times.There has to be another driver that will work for this thing but I am not having any luck finding it. Can someone please tell me how to fix this issue
View 2 Replies
View Related
Jun 23, 2010
[code]...
So then I thought, that maybe I can't install the RAID drivers from within the OS. So I caused the BSOD on purpose once again, and then with ICH10R RAID activated and Samsung hard disks attached, I choose the Windows 7 Recovery mode in the boot menu. It sees some problem(s), tries to repair, does not succeed and does not ask for drivers (which I put on a USB stick) to install. I also tried to use the command-line in the recovery: "rundll32 syssetup, SetupInfObjectInstallAction DefaultInstall 128 iaStor.inf" but it gave "Installation failed."
So I'm clueless how should I proceed. Do I really need to re-install Windows 7 and load RAID drivers in the Win7 setup? I don't want to install any OS on the RAID, the Windows 7 is and will be on the SSD. I just want to have a RAID-1 backup using those two hard disks.
View 3 Replies
View Related
Jan 13, 2011
I'm currently reformatting my Toshiba M400-S5032 to install Windows 7. Problem is that due to the PC coming with a RAID utility, the installer is unable to detect the HDD. How to get rid of the RAID?
View 4 Replies
View Related
Jun 17, 2011
I am unable to load creative sound blaster 5.1 driver for windows7 Os.
View 1 Replies
View Related
Nov 19, 2011
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when loaded up and i have the latest rst drivers installed..did this prior to the os install on the ssd. using the x58 e760a1 mobo. under device manager, the raid controller has an exclamation mark and no driver installed yet i have the latest rst 10.8.0.1003 installed..
View 1 Replies
View Related
Jan 26, 2011
Recently have been facing some issues with the shortcuts on desktop as well as quick launch, and some from the start menu. clicking these shortcuts, triggers the cursor to load briefly, but nothing happens.therefore, in order for me to run these programs i have to 'run as administrator', is there an alternative way to fix it? shortcuts that are unable to load so far, are mostly related to the internet, for example, windows live messenger, firefox, chrome, safari....except ie only recent installation: windows update; microsoft live essentials 2011
View 9 Replies
View Related
Mar 28, 2012
Would anyone be able to tell me why scrabble world wide on facebook will not load just keeps flashing on and off
View 2 Replies
View Related
Apr 25, 2012
I have tried to find the way to do this, but without success as I cannot see the wood for the trees.
I have a mature Windows 7 system, with so many applications loaded that rebuilding from scratch is just not an option. I have a 300MB Velociraptor wholly given over to the OS and another empty 300MB VR. I want to extend, that may not be the right word, my OS to use both disks in Raid 0.
View 2 Replies
View Related
Sep 28, 2012
I have a Gateway desktop that had Vista as the OS. I upgraded to Windows 7. Everything seemed to be going along well and then it rebooted and asked me to login. It won't accept my login. I've tried clicking ok with no entries still won't work. I rebooted and attempted to F8 to get in via safe mode and that screen flashes so quickly I can't hit enter on anything. This computer is 4 years old. I'm about ready to toss in the towel unless someone knows of a simple way to fix this issue.
View 4 Replies
View Related