Migrate Windows 7 Installation From RAID 0 (2HDs) To Single SSD?
Jan 1, 2012
I'm looking to move my Win 7 install from a RAID 0 (with two traditional HDs) to a new single SSD.
I have the new SSD installed in the computer and the system can see it fine. (In fact, I installed a trial copy of Win 7 and it boots up fine).
I'm not sure what's the best way for me to proceed. Do I make a disk image of the RAID partition with Acronis and restore it to the SSD? Any way I can set this up so I can keep my existing program files and installations?
View 2 Replies
ADVERTISEMENT
Nov 16, 2012
A little background on my system's configuration. My system was/is configured is a two disk RAID0 with a system partition and two other partition for Windows and programs. I'm wanting to migrate the partitions/data to a single disk system. I created a system image using both the Windows backup software and Novabackup. The problem I'm having is restoring either of those images to a single disk. Is it possible to restore an image from a RAID configuration to a single disk? If so, what am I missing? No matter which image I try to restore from, I either get a fail from Windows or can't be done in so many words from Novabackup. I just want the RAID image on a single disk.
View 2 Replies
View Related
Nov 9, 2011
I need to know how I can format a Raid Hard Drive to a Windows Format.
View 2 Replies
View Related
May 1, 2012
I cannot aford to buy SSDs yet and wanted to know how if at all I would clone my HDD to my Raid 0 Dynamic HDDs, windows wont install to them, and casper just overwrites one drive killing the dynamic setup and making a second single HDD clone.
I am using the trial edition of the current version of casper and trying to figure out if buying the full version would make a difference, the original drive is a 1.5TB and the two Dynamic Drive Array are 1TB, all seagates.I have 24GB of ram, a 2GB 550 Ti and a LGA1155 2.8GHz CPU running Windows 7 Ultimate Premium 64bit with a passive 3D LG monitor trying to run five game Accts simultaneously with TS3, Skype, GB3, Spybot and Logitech Services in the back ground
View 2 Replies
View Related
Sep 28, 2009
I recently built a computer with only one drive, I was wondering if it is possible to install another one and have them runing on raid 0 or do you suggest another type of raid maybe with 3 drives.
I have an asus mobo p5q3 so I can use Drive Xpert technology but a lot of reviews says that the speed of the drives is split in two when using these 2 sata connection (white and orange).
View 9 Replies
View Related
Sep 25, 2011
I bought a intel 320 160g gen3. Looking to clone my raid o to it. I may be over simplifying it but can't I just install the SSd in the 3rd Sata spot clone to it from the raid then just change the bios to boot off of the SSd and change it to ahci? Then keep the raid o as is for storage of games and such. I am not putting any important data on the raid o purely a gaming computer. Fresh instal isn't an option btw.
View 3 Replies
View Related
Feb 1, 2012
1)You have two hard drives in your PC. Drive A contains Windows installation and other files. Drive B is an empty drive. Your Motherboard supports RAID 1(additionally 0 and 5) and you want to setup hardware RAID 1. Is it possible to switch HDD to RAID mode, enter RAID BIOS, create array using drive A, copy drive B content to drive A and run RAID 1 using two drives(drive A should rebuild array on next restart and copy mirror drive A on drive B)
2)You have two drives, drive A and drive B running in hardware RAID 1. You need to format drive B, copy drive A's content oto drive B(which should be non-raid drive now) and install non-raid drive B on another PC.
3)You have three drive A, B, C. Drive C contains Windows and other files. You need to setup RAID 1 using drive A and B and then copy Windows from drive C to newly created array consisting of drive A and B.
All three scenarios require no Windows re-installation.
View 9 Replies
View Related
Feb 13, 2012
We have two disks in raid 0. We want to get rid of them, as they are failing and install a single hard drive with Windows 7. We currently have Vista installed. There are no files I need to copy, just want to start with a fresh operating system. How do I go about this? Can I just remove the old hard drives and replace with the single hard drive and install Windows 7 on it, or is it more complicated than that?
View 8 Replies
View Related
Feb 18, 2010
- build a system with 1 WD1101FALS HDD and installed Windows 7 64 bit no problem. All was good for few days until I got a bug to set up a RAID 10.
- Went out bought 3 more of the same drives. All 4 drives are WD1101FALS 1TB.
- Set up the RAID 10 array on the ASUS motherboard, got the RAID drives for Win7 64bit on a USB key.
- Start install, no problem. Win7 asks for drivers, I click browse and select the drives from USB for the RAID. Install continues, files are copied, thing are flying, it's fast.
- Then 1st re-start
- Windows continues to install (finalizing things, registry update, etc).
- I get to 4 check marks on the Windows Install screen and then it goes into the last step "Completing Installation". The progress bar goes to about 80% complete and then
BLACK SCREEN, computer re-starts. Windows comes up with a message "The computer restarted unexpectedly or encountered an unexpected error. Windows installation can not proceed. etc.." It assks to press OK and and PC re-starts and the installation re-starts from scratch. I tried about 15 times, with different RAID drives, from XP to Vista, to Win7.
I have no clue what else I can try. Usually people have problem with the RAID drives but I have no problem with that step. The drivers are selected and seem to be working fine. The install almost completes.
Here are the images on how far along the install goes. The progress bar actually goes more than that, I just took a picture before the black screen.
View 5 Replies
View Related
Jun 29, 2010
I can't install my Windows Ultimate 64 bit edition on my RAID 0 Western Digital 500GB hdd's because on the boot screen my computer keeps telling me to "Reboot and select proper boot device or insert boot media in selected boot device", I've done both those instructions, rebooted, reinserted, all of it, no solution. I made sure my boot priority is the drive first, and raid drives after. Still nothing. But this is the interesting part, last time I fixed this problem by using my previous computers dvd drive to install instead of the blu ray, it installed and everything was right with the world.
But I have since then thrown out the old DVD drive, and now have nothing to install with. So what I did in the past hour was used a freinds DVD drive to install and it did not work. When my System Config, is set to RAID, it calls both my blu ray and his dvd drive, ATAPI CD, when in IDE, it calls my blue ray a blue ray and his dvd drive a dvd drive. I simply want to do a clean(custom) install of my windows 64 bit on my two RAID 0 HDDs, I've checked the boot priority, I've put both hdds in RAID0 and I've also used someone elses dvd dive to try and install.
View 1 Replies
View Related
Aug 14, 2010
I recently bought two ssds and striped them with my on board raid. Any ways i got windows 7 installed on it just fine ( after i got the driver issues worked out)But my problem is that I was looking forward to a fast boot time, but now every time i boot it go's to a screen that detects all of my storage devices.
View 7 Replies
View Related
Nov 28, 2009
I have a computer I built using an ASUS MB A8N-SLI Premium card. This card is a was purchased in 2007 and is one having two RAID chipsets. The first is a NVIDA and the second is a Silicon Image. The OS was XP Professional.
When I set up to install Windows 7 Professional Upgrade, I found that a) there were no ASUS drivers for Windows 7 and the "generic" Nvida and SII Raid drivers would not work with this ASUS card. So, says I, lets try and see if the VISTA drivers will be accepted by Windows 7... Nope.. Win 7 error says "can't find any drivers compatible with your hardware". OK.. So..
I have to buy a completely new motherboard.. I chose the Gigabyte MA790GPT-UD3H with AMD Phenom II Quad-Core 3ghz CPU. The M B is excellent with dual output video for two CRTs, and all the I/O I needed including IEEE1394 port for my FlexRadio.. But I get ahead of myself! So.. Let the buyer of Windows 7 be aware that he should check his MB and insure that Windows 7 drivers are available for his particular model. Otherwise, upgrading to Windows 7 can be more expensive than you planned!
View 2 Replies
View Related
Nov 29, 2012
I am currently attempting to install Windows 7 on an SSD RAID Array, and I have encountered several issues (this has been a one step forward, two steps backward affair). The issue that I am currently facing is the fact that I am unable to load RAID drivers during the OS installation.As is normal for this kind of installation I choose "Custom" and I cannot see any drives listed, this is the point at which I click on "Load Drivers" and then I select "Browse". My challenge is that regardless of how I "insert the drivers", which is to say whether I put them on a separate USB drive (FAT32 partitioned), or take the Windows 7 installation DVD out and insert a CD with drivers - I simply cannot navigate to the drivers.Because I am unable to load the RAID drivers I simply cannot proceed with the OS installation.*** Note ****As of writing this I came across a program called RT Seven Lite, which has allowed me to create a "slip streamed" Windows 7 installation - using the program I was able to integrate the troublesome drivers into the Windows 7 installation disk.
View -1 Replies
View Related
Nov 28, 2012
I am currently attempting to install Windows 7 on an SSD RAID Array, and I have encountered several issues (this has been a one step forward, two steps backward affair). The issue that I am currently facing is the fact that I am unable to load RAID drivers during the OS installation.
As is normal for this kind of installation I choose "Custom" and I cannot see any drives listed, this is the point at which I click on "Load Drivers" and then I select "Browse". My challenge is that regardless of how I "insert the drivers", which is to say whether I put them on a separate USB drive (FAT32 partitioned), or take the Windows 7 installation DVD out and insert a CD with drivers - I simply cannot navigate to the drivers.
Because I am unable to load the RAID drivers I simply cannot proceed with the OS installation.
As of writing this I came across a program called RT Seven Lite, which has allowed me to create a "slip streamed" Windows 7 installation - using the program I was able to integrate the troublesome drivers into the Windows 7 installation disk.
View 5 Replies
View Related
Nov 19, 2011
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when loaded up and i have the latest rst drivers installed..did this prior to the os install on the ssd. using the x58 e760a1 mobo. under device manager, the raid controller has an exclamation mark and no driver installed yet i have the latest rst 10.8.0.1003 installed..
View 1 Replies
View Related
Apr 25, 2012
I have tried to find the way to do this, but without success as I cannot see the wood for the trees.
I have a mature Windows 7 system, with so many applications loaded that rebuilding from scratch is just not an option. I have a 300MB Velociraptor wholly given over to the OS and another empty 300MB VR. I want to extend, that may not be the right word, my OS to use both disks in Raid 0.
View 2 Replies
View Related
Jul 10, 2012
I have Win 7 Pro 64 bit installed on an ASUS P7P55D LE motherboard which supports RAID 0,1,5 and 10 using Intel Matrix Storage Technology through an on board Intel P55 chip set. The system was assembled in Nov 2009 using two Western Digital Caviar Black 750Gb drives in RAID 1 as Drive C:. (I now know from Western Digital Customer Service that I shouldnt have done that, but lets move on from there). Last December, an error message informed me the RAID array was broken and identified one of the 750 Mb drives as needing replacement. I happened to have a spare 1.5Tb WD Caviar Black at the time, so I pulled the 750Mb drive and replaced it with the 1.5Tb drive. Life was once again good. Then on July 4th (wouldnt you know) there was a repeat of the December 2011 error message telling me to replace the other original 750Gb drive. Okay so I had another 1.5Tb WD Caviar Black laying around (dont ask) and did a similar swap out. Thats when I emailed WD Customer Support asking about the 750 since their diagnostic software said the drives were fine. Thats when I learned that I should be paying lots more for enterprise quality drives if I want/need RAID. Well thats not what ASUS says in their advertising, but live and learn. All thats prologue, because my real question is whether its possible to break the hardware-based RAID 1 array and set up a Windows 7-based RAID 1 with the two 1.5Tb WD Caviar Black drives without having to reinstall Windows 7.
View 1 Replies
View Related
Sep 22, 2012
So I have an old 5400 RPM 500GB HDD, which I use primarily for Windows and pretty much everything, and then I have a 120GB SSD just for games. My mates keep bugging me on how its such a waste of an SSD, and I agree, but I don't want to reinstall Windows 7 again (I have 64 Bit Ultimate).how to move windows to boot on the SSD (How much room is windows anyways.. 30GBs?).
View 19 Replies
View Related
Aug 24, 2012
I need a PCI SATA 6 RAID card that has at least 4 slots for 4 X 2TB Hard drives for a RAID 5
View 3 Replies
View Related
Jan 1, 2013
I had one hard drive failed(640gb). I bought replacement and tried to restore image but it failed. Then I wanted to convert to non raid system. I changed both drives(640gb) to non raid and bios change in advance setup. I am getting error when I try to reinstall win 7, "setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information". I have deleted old partition many times but win 7 setup on this dell xps435 desktop won't install windows.
View 4 Replies
View Related
Oct 26, 2011
I'm going to upgrade my pc hardware, pretty much all of it since it's been "a while" (try 2009 since last time).
Is there any way I can migrate my Windows 7 professional to the new PC? I would like to completely format my HDD before moving it to my new machine and then reinstall my OS on it. It is a downloaded version so I haven't got a cd but it is legit, I have got the key and it is activated. Would there be a way to deactivate the key for this pc and then reactivate it on the new one with the same key?
View 6 Replies
View Related
Sep 14, 2011
Replacing my hard drive with a new larger drive. Currentlly running Windows 7 Pro-64bit and the older drive has several partitions. Do I have the following steps correct?
1) Create a system repair disc
2) Create a system image of the "reserve" and "C:" partitions on an external/network drive
3) Install the new hard drive
4) Use the system repair disc to restore the image onto the new drive
5) Connect the older drive as secondary
6) Transfer other files to the new primary drive as needed/wanted
The older drive may end up in a different build for the family.
View 6 Replies
View Related
Jul 30, 2012
I've been trying to use Paragon migrate to move Windows 7 from HDD to SSD. Apparently there is something wrong with my "boot records of partitions" according to Paragon tech support and that is why Migrate doesn't do the job. They want me to use the following on my HDD to try and fix it.
- Create Windows 7 Repair Disc (Control Panel - Backup & Restore - Create a system repair disc)
- Select Use recovery tools and then select Recovery console from recovery tools menu
- type the next commands:
bootrec /fixmbr
bootrec /fixboot
bootsect /nt60 all
can that mess my booting of Windows in any way, as thus far my Windows 7 work fine? Is there a way to check the health of "boot records of partitions" without these commands, as I fear it will just replace it and that might cause Windows be unstable.
View 6 Replies
View Related
Aug 24, 2011
Unless anyone has inside knowledge that ssd prices are going to half in next few months, Crucial M4 64GB at around $100 is just too tempting to ignore.
In my current setup, user profiles are already on a different partition. I'm looking for the best way to migrate as much settings as possible. Among programs I have to reinstall and config are vs2010, sql server 2008, office 2003, quicken, vmware. Glad I made concious decision to use as much portable programs as possible.
View 9 Replies
View Related
Jan 23, 2013
Can a HDD that has documents and pictures I would like to save, that also has windows vista on it and move it to a Win 7 computer reformat the HDD I want to recover?
View 2 Replies
View Related
Aug 12, 2012
Which configuration would be better using mobo sats 2 raid or using seperate rid controller via pcie card Rosewill Rc-211 wsis3132) or should I use mobo for raid and card for extra sata w/o raid I have more drives than sata slots. How do I transfer data videos/Tv shows from existing drive to raid?
View 1 Replies
View Related
Dec 7, 2011
I am running windows 7 professional on a 1tb HDD. I recently got a new 120gb ssd, and it is very fast! However, I am trying to figure out how I would migrate just my critical OS files over to the SSD without doing a clean install of Windows 7. Any working programs or workarounds to do this? (Without Data Loss).
View 4 Replies
View Related
Jan 19, 2012
Is it possible to move the OS to a new drive, like a SSD, without having to reinstall everything?
View 10 Replies
View Related
Jan 24, 2013
I have my current Windows 7 setup on a regular 2TB drive (about 1.4TB of which is used). I would like to move my installation onto my new SSD (only 256GB), and obviously I can't simply clone it. I do NOT want to just install from scratch (I have a bazillion programs installed, it would take forever to do that over)
What I was thinking, was that I could migrate the base system files onto the SSD, and then use symbolic links to point to my bulkier folders (Program Files & Downloads are taking up most of the space, and I don't particularly care if these are at SSD speed) which would be located on the 2TB HDD. Does anyone know of a way to migrate a Windows 7 while excluding certain folders? If I could do that, then after the migration I could just set up symbolic links to point to my main storage drive without having to start from scratch.
View 3 Replies
View Related
Jan 6, 2009
anyways, my main drive is a RAID 0 with Vista x64, but I have a second HD that is a SATA 250GB, which I installed Windows 7 on. The only way I could get install to work was to switch my BIOS to IDE mode rather than RAID. I would of course though, like to be able to access my Vista drive from Windows 7 (and more importantly, not have to switch between IDE/RAID mode at all in the BIOS, it's a pain).
Now, the one odd this about this all is that the drivers I have for Vista (x86/x64 drivers) for this mobo's RAID controller WORK when loaded on installation to identify and install to the drive, but seem to not load or not work in any way once the first reboot on install occurs. Maybe this is because I installed from within Vista x64, though.
(Incedentally, my motherboard is an M3A Asus, using ATI's SB600 for a RAID controller)
I've tried loading the drivers from within Windows 7 while in IDE mode, but the install program won't let me. At first it didn't allow because of version restrictions, but then I altered the ini file to get around that, but it encounters some sort of error when installing and quits.
Any help that can be offered, would be grateful. I realise it's a beta and not a real release, so I can get past the BSOD from my odd setup, and I really am enjoying playing around with it so far. Very very impressed.
Edit: Just in case anyone thinks of suggesting me to right-click the inf file and install that way, already tried, won't allow for it.
View 0 Replies
View Related
Jul 15, 2010
I'm running out of disc and want to preferable migrate the whole kit and kaboodle to a new drive. I'd like to use the current drive as a rendering drive.Is there an easy and "free" way of doing this or should I just bite the bullet and reinstall?
View 2 Replies
View Related
