I recently bought two ssds and striped them with my on board raid. Any ways i got windows 7 installed on it just fine ( after i got the driver issues worked out)But my problem is that I was looking forward to a fast boot time, but now every time i boot it go's to a screen that detects all of my storage devices.
View 7 RepliesI want to slick my drive and do a clean install of the RC version. I currently have a Raid 0 configuration on 2 additional drives (not the OS drive) using the Asus P6T on-board controller. Will that Raid be preserved and thus the data as well? What is the best way to accomplish this with the least amount of angst?
View 4 Replies View RelatedI have a computer I built using an ASUS MB A8N-SLI Premium card. This card is a was purchased in 2007 and is one having two RAID chipsets. The first is a NVIDA and the second is a Silicon Image. The OS was XP Professional.
When I set up to install Windows 7 Professional Upgrade, I found that a) there were no ASUS drivers for Windows 7 and the "generic" Nvida and SII Raid drivers would not work with this ASUS card. So, says I, lets try and see if the VISTA drivers will be accepted by Windows 7... Nope.. Win 7 error says "can't find any drivers compatible with your hardware". OK.. So..
I have to buy a completely new motherboard.. I chose the Gigabyte MA790GPT-UD3H with AMD Phenom II Quad-Core 3ghz CPU. The M B is excellent with dual output video for two CRTs, and all the I/O I needed including IEEE1394 port for my FlexRadio.. But I get ahead of myself! So.. Let the buyer of Windows 7 be aware that he should check his MB and insure that Windows 7 drivers are available for his particular model. Otherwise, upgrading to Windows 7 can be more expensive than you planned!
- build a system with 1 WD1101FALS HDD and installed Windows 7 64 bit no problem. All was good for few days until I got a bug to set up a RAID 10.
- Went out bought 3 more of the same drives. All 4 drives are WD1101FALS 1TB.
- Set up the RAID 10 array on the ASUS motherboard, got the RAID drives for Win7 64bit on a USB key.
- Start install, no problem. Win7 asks for drivers, I click browse and select the drives from USB for the RAID. Install continues, files are copied, thing are flying, it's fast.
- Then 1st re-start
- Windows continues to install (finalizing things, registry update, etc).
- I get to 4 check marks on the Windows Install screen and then it goes into the last step "Completing Installation". The progress bar goes to about 80% complete and then
BLACK SCREEN, computer re-starts. Windows comes up with a message "The computer restarted unexpectedly or encountered an unexpected error. Windows installation can not proceed. etc.." It assks to press OK and and PC re-starts and the installation re-starts from scratch. I tried about 15 times, with different RAID drives, from XP to Vista, to Win7.
I have no clue what else I can try. Usually people have problem with the RAID drives but I have no problem with that step. The drivers are selected and seem to be working fine. The install almost completes.
Here are the images on how far along the install goes. The progress bar actually goes more than that, I just took a picture before the black screen.
I'm looking to move my Win 7 install from a RAID 0 (with two traditional HDs) to a new single SSD.
I have the new SSD installed in the computer and the system can see it fine. (In fact, I installed a trial copy of Win 7 and it boots up fine).
I'm not sure what's the best way for me to proceed. Do I make a disk image of the RAID partition with Acronis and restore it to the SSD? Any way I can set this up so I can keep my existing program files and installations?
I can't install my Windows Ultimate 64 bit edition on my RAID 0 Western Digital 500GB hdd's because on the boot screen my computer keeps telling me to "Reboot and select proper boot device or insert boot media in selected boot device", I've done both those instructions, rebooted, reinserted, all of it, no solution. I made sure my boot priority is the drive first, and raid drives after. Still nothing. But this is the interesting part, last time I fixed this problem by using my previous computers dvd drive to install instead of the blu ray, it installed and everything was right with the world.
But I have since then thrown out the old DVD drive, and now have nothing to install with. So what I did in the past hour was used a freinds DVD drive to install and it did not work. When my System Config, is set to RAID, it calls both my blu ray and his dvd drive, ATAPI CD, when in IDE, it calls my blue ray a blue ray and his dvd drive a dvd drive. I simply want to do a clean(custom) install of my windows 64 bit on my two RAID 0 HDDs, I've checked the boot priority, I've put both hdds in RAID0 and I've also used someone elses dvd dive to try and install.
I have a Toshiba laptop with 2 partitions- One with windows vista on it and one for backups. I want to join the two partitions and use the Windows 7 Upgrade pack and do a clean installation. How would i go about joining the two partitions? Am i able to use the upgrade version to install it?
View 9 Replies View RelatedI have windows 7 32bit and going to clean install the 64 bit version and the OS is on drive C (or partion C) so I copied my personal files to drive G,If i clean install windows 7 64 bit will it delete everything on my hard drive or will it just format the partion that has the os.
View 1 Replies View Relatedi tried many time to reformat, then re-install win 7, pc re-started and stopped at the black screen with mouse cursor, i have tried F8 and start up repair, nothing helps.
View 1 Replies View Relatedi had clean installation of windows 7 professional sp1 32, on VAIO VGN-FZ11Z.it is giving me many validation errors here n then, mostly when i launch an application or setup file. I have not installed any drivers for it until now bcz im not finding them. The windows is also flagging for driver of firmware parser driver but im not finding it anywhere on support of Vaio website. Some error messages and snapshot of device manager attached below. Kindly help me out . also tell me which drivers i must install for sony vaio vgn-fz11z for Windows 7.
View 5 Replies View Relatedi am going to install a factory oem windows 7 on my hp laptop following the gregrocker tutorial. now when i check the hp support site for drivers and softwares, i am confused on what to install and what to not.
1. Driver - Audio High-Definition (HD) Audio Driver
2. Driver - Chipset Intel Chipset Installation Utility and Driver.Intel Management Engine Interface (MEI) Driver.Intel USB 3.0 Host Controller Driver
3. Driver - Graphics NVIDIA High-Definition (HD) Graphics Driver Intel High-Definition (HD) Graphics Driver
4. Driver - Keyboard, Mouse and Input Devices Validity Fingerprint Sensor Driver
I've done a clean installation of win 7 home for a mate on his laptop and want to use the product key that is underneath the laptop to complete the installation but the key has faded completely, I've emailed toshiba about it as its a toshiba model but ive had no response and its been 2 days. Is there any way to retrave it any quicker?
View 9 Replies View RelatedAfter formatting and setting a new partition using the installation disk, I install Windows 7, all goes well. But as soon as the installation is finished and my laptop restarts, it wont boot from the HDD. I keep getting error messages saying:
Windows Boot Manager
Windows failed to start....
File: ootBCD
Status: 0xc000000e
[Code].....
A copy of the current boot configuration data will be saved as c:ootcd.backup.0001
However when i hit the "ok go ahead and fix it then!"-button i get another error saying Startup Repair cant save the new boot options. Anyone know if i can fix this problem with BCDedit or bootrec.exe
Got Windows 7 Clean Installation over the computer's USB 3.0 port done without too many problems but with some hassle anyhow.For the clean installation I followed the procedure of GreGrocker Clean Reinstall - Factory OEM Windows 7 and put the whole installation onto a 4GB USB Flash Drive.From the computer's USB 2.0 ports there was no problem whatsoever and Windows 7 got installed very quickly.However, over the computer's USB 3.0 port things weren't easy. I finally got it done by uploading the proper USB 3.0 Root Hub and Controller drivers *.ini and *.sys files.Strangely enough, at first everything went well over the USB3 port and the WinPE environment with its RAM drive (X:) got deployed correctly. The only sensible explanation for that is that the computer's BIOS used the appropriate and build-in USB3 driver to do that part of the job.However, once the the installer (located in the X: drive) was about to install Window 7 on the system HDD, it asked me for a CD/DVD driver. I loaded the appropriate USB3 drivers at that stage and the installation process continued over the USB3 port.I had a closer look in the RAM drive (X:WindowsSystem32DriverStoreFileRepository), and indeed, there are no USB3 drivers present anywere in that folder, only USB2 drivers where in there, named: usb.inf_amd64... and usbpor.inf_amd64... So I was wondering, as USB3.0 is so common and the future standard, why aren't there any USB3 drivers in that folder present? Is there any possibility that the creators of the Windows 7 Clean Installation files (Digital River, or My Digital Live) could put USB3 drivers in the Win7CI package?
View 1 Replies View RelatedPurchased a Windows 7 64 bit Professional (academic). I have been originally using a Windows 7. However, the HDD had been giving me fits and has currently died. I'm not unable to activate my upgrade key since my new HDD does not have an old version of Windows to upgrade from. What should I do?
View 1 Replies View Relatedyo guys i am going to install a factory oem windows 7 on my hp laptop following the gregrocker tutorial. now when i check the hp support site for drivers and softwares, i am confused on what to install and what to not. [code]
View 2 Replies View RelatedI'm using Window7 RC 7100 , after clean installation and while connection my game controller i went to control panel but i couldn't find Game Controller Setting ? is it hidden if so how to make it visible and if not how can i get it.
View 9 Replies View Relatedi was just wondering how i extract the files from an installation disc onto a flash drive, so i can use the flash drive to perform a clean install.Extract Files from Windows 7 Installation DVD.i already looked at this but it wasn't specific to my uses.
View 3 Replies View Relatedi was wondering if anyone has any programs they could recommend to use to wipe a hard drive clean before reinstalling windows 7, I noticed you have this CCleaner 3 link on here CCleaner - Download.com If i put that on a disk and started it up as i would to reinstall can that wipe the disk clean?
View 9 Replies View RelatedSo i'm trying to do a clean install of windows 7 (x36) from XP that im currently running. i've burnt the iso down on a dvd and it boots fine and the installation runs normally. I'm getting through all the steps within the installation when it at last says something about that it's done and it's going to restart for the first use of windows 7. Now i'm getting my problem.
The computer starts up and goes through the memory testing and such but just as it's about to start windows 7 i'm getting a black screen and my monitor says "No signal - blabla" and 3 seconds later it restarts itself. If i don't do anything now my computer loops this restarting on and on...
So i've tried to install it with removing my two 512mb RAMS and only have two 1gb of the same brand. Didn't help.
i had windows vista on my pc and i did a Clean Installation of windows 7.but now i have some problems,and i want to install windows 7 again.do i have to go back to windows vista? i have a windows 7 upgrade dvd.
View 9 Replies View RelatedI have a Samsung series 9 (NP9004XC) and I am upgrading the 128gb SSD that came with the computer to a Crucial M4 256GB mSATA. I am doing a clean install from a bootable USB that I created from the recovery disc that was included with the computer.I can load up setup but once I get to the part where I choose what disk I want to install it to I get an error. There is only one disk listed (Disk 0, Partition 1) and when I try to select that disk to install Windows to I get the error:"Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
View 7 Replies View RelatedI've been troubleshooting this computer for some time now. At first, I disabled RAID because of the blue screens and I found that one was bad and the second of the RAID 1 appeared fine. Well, I installed XP to ensure it would work and that was extremely slow. My client didn't have a disc to XP MCE, but instead bought Windows 7. The installation took about 12 hours and the system is often unresponsive. On resource monitor, the 2.13Ghz Conroe CPU is barely tapped and the 2GB of RAM is barely at 30%. However, the system takes forever to boot and it very often stops responding for a period of time.
I did my research and found out that this model--original specs--can handle 7 better than this. I told the client it was probably an HDD error, as it seems to hang everytime the system must access the HDD. I can't even run the Index to find out what the systems rating is. I mem tested the RAM and chkdsk the HDDs before removing the first because of its clear faults in its inability to hold an OS installation. I recently installed the 2.5.3 BIOS update, but I haven't had a chance to install a newer version of Intel Matrix Manager.
so for about 5 days, i have experienced random and sporadic bsod, before that it was normal and stable. i did my installation on my os on october 2011. i'm quite sure it's graphic driver but i've clean installed almost 10 times and still crashing. it crashes randomly when i opened a Internet video or open a video file, everything regarding to video. i'm already feeling hopeless here
my specs are
win 7 64 bit home premium (not oem)
gigabyte x58 ud3r
i7 920
gigabyte gtx 480
asus xonar essence stx
3x2 ocz ram 1033 mhz
my os is located on my ssd which is an intel 510 120 gb
i got 1 tb hard drive caviar green
i got 500 gb hard drive caviar green
and 250 gb seagate (really old, it's ide iirc)
i've uploaded the minidump and system performance, i hope i did right on the attachment (first time posting here).
i clean installed new WINDOWS 7 PROFESSIONAL 32bit on laptop SONY VAIO VGN-FZ11Z.Operating system is genuine but downloaded from MSDN. But it is giving me a lot of process validation errors. Genrally these errors are coming on application launch. After that mostly application aborts or restarts.
View 2 Replies View Relatedi have built my computer with new parts and the installation stalls returning the errror code: 0x80070570
View 1 Replies View RelatedMy daughters CQ61 required a clean install after repair. Windows 7 jus goes through the normal install process and hangs at completeing installation. I'm not a Noob but not a Geek either. I can only assume the drive is fine as it is running fine in the T400 IMB i am using now. Now here is the strange bit..... When i was just starting out i to had a CQ61 and it too needed a clean install and it did the same for months with friends in th know looking and trying to. In the end i send off for the factory software discs and tey went on straight away with win7 working fine. It was literally restored to new. I passed on said disks when i sold said CQ61 adising the guy never to go down the road i had. Now the software discs are no longer available from HP and There is none on torrents anywhere. I cannot accept that this is the only way to install clean install. If it was that critical to have the discs they would send them out with the new machine. So thats muti attempts by multiple people on 2 identical machines presenting the same hang. One was solved with the Sowfwaredisks provided by HP and are no longer available. Should have copied them i know but never thought i would be looking down the same barrel of the same gun.
View 1 Replies View RelatedI am currently attempting to install Windows 7 on an SSD RAID Array, and I have encountered several issues (this has been a one step forward, two steps backward affair). The issue that I am currently facing is the fact that I am unable to load RAID drivers during the OS installation.As is normal for this kind of installation I choose "Custom" and I cannot see any drives listed, this is the point at which I click on "Load Drivers" and then I select "Browse". My challenge is that regardless of how I "insert the drivers", which is to say whether I put them on a separate USB drive (FAT32 partitioned), or take the Windows 7 installation DVD out and insert a CD with drivers - I simply cannot navigate to the drivers.Because I am unable to load the RAID drivers I simply cannot proceed with the OS installation.*** Note ****As of writing this I came across a program called RT Seven Lite, which has allowed me to create a "slip streamed" Windows 7 installation - using the program I was able to integrate the troublesome drivers into the Windows 7 installation disk.
View -1 Replies View RelatedI am currently attempting to install Windows 7 on an SSD RAID Array, and I have encountered several issues (this has been a one step forward, two steps backward affair). The issue that I am currently facing is the fact that I am unable to load RAID drivers during the OS installation.
As is normal for this kind of installation I choose "Custom" and I cannot see any drives listed, this is the point at which I click on "Load Drivers" and then I select "Browse". My challenge is that regardless of how I "insert the drivers", which is to say whether I put them on a separate USB drive (FAT32 partitioned), or take the Windows 7 installation DVD out and insert a CD with drivers - I simply cannot navigate to the drivers.
Because I am unable to load the RAID drivers I simply cannot proceed with the OS installation.
As of writing this I came across a program called RT Seven Lite, which has allowed me to create a "slip streamed" Windows 7 installation - using the program I was able to integrate the troublesome drivers into the Windows 7 installation disk.
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when loaded up and i have the latest rst drivers installed..did this prior to the os install on the ssd. using the x58 e760a1 mobo. under device manager, the raid controller has an exclamation mark and no driver installed yet i have the latest rst 10.8.0.1003 installed..
View 1 Replies View RelatedI need a PCI SATA 6 RAID card that has at least 4 slots for 4 X 2TB Hard drives for a RAID 5
View 3 Replies View Related