Cq61 Clean Install Hangs At Competing Installation
Dec 19, 2012
My daughters CQ61 required a clean install after repair. Windows 7 jus goes through the normal install process and hangs at completeing installation. I'm not a Noob but not a Geek either. I can only assume the drive is fine as it is running fine in the T400 IMB i am using now. Now here is the strange bit..... When i was just starting out i to had a CQ61 and it too needed a clean install and it did the same for months with friends in th know looking and trying to. In the end i send off for the factory software discs and tey went on straight away with win7 working fine. It was literally restored to new. I passed on said disks when i sold said CQ61 adising the guy never to go down the road i had. Now the software discs are no longer available from HP and There is none on torrents anywhere. I cannot accept that this is the only way to install clean install. If it was that critical to have the discs they would send them out with the new machine. So thats muti attempts by multiple people on 2 identical machines presenting the same hang. One was solved with the Sowfwaredisks provided by HP and are no longer available. Should have copied them i know but never thought i would be looking down the same barrel of the same gun.
View 1 Replies
ADVERTISEMENT
Jul 10, 2009
I've been trying to perform a clean install the latest 32-bit Windows 7 RC and keep encountering indeterminate problems.
After updating to the latest BIOS, resetting all BIOS settings, and removing all of my peripherals, sound card, and video card (I used built-in video for the most recent install attempt), I still get either a BSOD (Stop 0x0000001a MEMORY_MANAGEMENT) or a hang (with misc. video distortion) at some point during the install, usually after 'expanding files' during the windows install. A few times the screen has just gone blank.
(Before doing all this, I was getting IRQL_NOT_LESS_THAN_OR_EQUAL BSODs, but those seem to have gone away after I removed everything).
As background, the system successfully passed the upgrade advisor and completes the memory test available from the boot loader and has been a rock-solid XP machine for 2 years (although I'm not doing an upgrade install)
I'm at a bit of a loss as to what to do next. I could sit around and twiddle BIOS memory settings, I suppose, but I'm hoping someone can suggest a more principled approach.
View 0 Replies
View Related
Nov 30, 2009
I am trying to do a clean install of Windows 7 64 bit. It hangs at the starting windows screen and does nothing more. No HDD activity or anything. Let it sit all night like that to see if it would go any further, but it didn't. Anyone else have this experience, and if so, what did you do to make it work?
View 6 Replies
View Related
Dec 16, 2012
my PC randomly hangs and makes a lovely noise (through the speakers rather than the computer itself) when listening to music, watching vids online/offline, gaming, basically at any time, when there is no sound it still hangs for a second when moving the mouse but makes no noise through the speakers. I've just done a clean install and have removed all OC to see if it makes any difference, all drivers are up to date with latest versions from manufacturers, i'm about to pull out my sound card and use onboard sound to see if that's the issue, but i believe i've tried that once before. Have experienced BSOD on this rig, but haven't had it for a while.
Here's my rig:
Win 7 Ultimate x64
Intel i5 3750K, stock speed
8Gb Crucial PC3-10700H RAM
Gigabyte Z77-DS3H mobo (F9 BIOS - not F10 beta)
Saffire HD7770, stock speed
M-Audio Audiophile 2496
OCZ Agility 3 120Gb SSD (Firmware 2.25 I believe)
Seagate Barracuda 500Gb HDD
View 6 Replies
View Related
Feb 23, 2009
I attempted a windows 7 install on an x64 and x32 system several times with the same result. The Upgrade runs until the last stage and then hangs. I looked at the logs but didn't see any errors. All my systems are custom built using Vista ultimate OEM additions.I was successful installing the software as a new install.I updated all the drivers.
View 7 Replies
View Related
Mar 3, 2012
1) Download Cumulative Security Update for Internet Explorer 8 for Windows 7 (KB2647516)
2) PC crashes while making a restore point.3) Reboot - normal startup. But when I shut down later, the update tries to install and the installation hangs. After disc activity ceases, I shut down manually.4) Reboot - normal startup.At this point, I decided to use System Restore to clean out any residue from the failed install before downloading the patch again. Yup, you guessed it, I used the damaged restore point. D'oh!5) PC reboots as part of restore process - I get a startup error.6) Scan for problems - attempt repair - recieve the following error. "StartRep.exe Application Error. The instruction at 0x75bc9a45 referenced memory at 0x538e0e85. The memory could not be read"7) I try to restore to an earlier point, but the restore fails."System Restore failed while mounting the registry from the restore point. Unspecified error (0x80070020)"8) I close System Restore window and PC reboots automatically - normal startup.9) I recieve a notification from "Solve PC Issues" in the taskbar saying Microsoft Security Essentials is out of date and would I like to update?
So here I am. My PC appears to be running smoothly, but I don't know if there's any hidden damage in the system. I still want to clear out any residue from the failed install before I download the patch again, but now I'm wary of using System Restore. Also, the MSE update notification has me puzzled - the last restore point I tried to restore to preceeded an MSE definitions update, but that restore failed (didn't it?) and anyway, I don't normally recieve definitions update notifications from "Solve PC Issues". This las left me unsure where my system is at restore point-wise right now.
View 2 Replies
View Related
Feb 13, 2013
I am getting an error "cannot install" 0x80070714 when I try to install windows 7 into a clean disk and the installation just stops..
View 3 Replies
View Related
Feb 6, 2013
install web camera Eton for laptop Hp persario CQ61?
View 1 Replies
View Related
Jul 1, 2010
i had windows vista on my pc and i did a Clean Installation of windows 7.but now i have some problems,and i want to install windows 7 again.do i have to go back to windows vista? i have a windows 7 upgrade dvd.
View 9 Replies
View Related
Aug 3, 2012
I have a Samsung series 9 (NP9004XC) and I am upgrading the 128gb SSD that came with the computer to a Crucial M4 256GB mSATA. I am doing a clean install from a bootable USB that I created from the recovery disc that was included with the computer.I can load up setup but once I get to the part where I choose what disk I want to install it to I get an error. There is only one disk listed (Disk 0, Partition 1) and when I try to select that disk to install Windows to I get the error:"Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
View 7 Replies
View Related
Sep 19, 2012
Windows 7 clean install hangs at starting windows screen
View 4 Replies
View Related
Dec 28, 2012
I recently got a new asus laptop and some of my programs aren't compatible with windows 8. So i'm trying to downgrade to windows 7 because i never liked w8 in the first place. So when i boot from CD (64-bit windows 7 ultimate) it will install without any problems, but when it gets to the 'starting windows' screen the animation freezes and it just stays there.
View 49 Replies
View Related
Aug 12, 2012
So I just did a new custom built comp and got Windows 7 Professional for it. I burnt it to a DVD from the ISO I got from the Microsoft Store. It would freeze at the Starting Windows screen just after the 4 dots converged into the logo.
Things I've tried:
-One stick of RAM
-Installed on same HDD on another computer rig (Booted fine until I brought it back to my new rig. Then it wouldn't boot on neither)
-Memtest
-USB Boot installer
I also have all the unneeded peripherals out.
Rig:
Z68XP-UD3 (Using onboard VGA until 7 is working then its a Asus GTX 560 Ti)
1 4 GB Corsair Vengence 1600 MHZ. (Took the second out)
I5 2500K 3.3 GHz(Stock)
600W OCZ MODX Stream Pro
1 TB Western Digital Black HDD
View 1 Replies
View Related
Jun 2, 2011
I have just got Windows 7 Ultimate.I accept the Licence Agreement, set my partitions as i want them but when it gets to the expanding files part it will hang at 0%. This happens on both the 32 & 64 bit disc.This is a brand new purchase which I opened it about an hour ago.The laptop has a 400GB HD and 2GB of ram. It came with Home Prem x64 pre-installed, So the hardware meets the requirements.What seems to be the problem?
View 9 Replies
View Related
Sep 27, 2012
Ill try to make this short and simple, i had same pc for around 3 years now, finally managed to ruin my first win 7 instalation by being lazy, that resulting in long needed reinstall, no problem there,But after everything was done, my pc started randomly freezing for around 1-5 mins ( depends, usually around 3 mins ) then it just comes back alive like nothing happened, sometimes video driver crashes My first thought was that my hdd finally dying on me, but after numerous test found nothing wrong on any of them and freezes doesnt always occur on hdd usage i ruled that out, some googling blamed it on new video drivers, got other ones, same, still freezing, reseted my bios to default, still same, sometimes i can turn on a game and play 2 hours straight and nothing will happen, next time i can startup movie and it will freeze 2 times in 5 mins, already reinstalled coddecs and video players i am just running out of ideas here, never had this issue before, using same windows 7, same install, same pc and all of my drivers/programs are same ones i used
View 11 Replies
View Related
Oct 31, 2009
This is a nightmare, after solving the first problem I had, where the installation gets stuck in 'Copying windows files' (I had to disable the floppy disk from the BIOS, even not having floppy disk physically).
Now all the files are copied and extended properly, but when showing the screen saying that the system is going to reboot, the installation freeze. It never reboot.
Then I do a hardware reboot, Windows 7 loads ok, but in the screen that reads "Completing installation..." the process never ends.
I've seen (through shift+F10) that the log file 'setupapi.dev.log' reads something like it is looking for a driver for a pci.. but don't know what it means.
View 9 Replies
View Related
Mar 19, 2011
I am helping out a friend by re-installing Windows 7 on his laptop. Unfortunately the laptop had been infected beyond repair by a virus/malware and would not boot past bios.When installing Windows 7 x32, I make it to the "Setup is starting..." screen and it does not continue. It is not the disk as I have used the same one to install it on my laptop. The laptop is a Dell Inspiron 1545 with 4gb of ram and 500gb HDD space
View 4 Replies
View Related
Sep 2, 2012
I have a Toshiba L505-L5007 laptop and a while back the audio went out on it. After days of trying to find the problem to no avail, I was advised to try a complete factory restore because the person thought it was an OS issue. Well, now I try to restore it to factory settings but the OS hangs at the configuration screen on the 5th reboot. Is there something that I might have overlooked? I've tried scouring the internet for people with the same problems, but I can't seem to find anyone with the same problem. I've also tried upgrading the BIOS in case there was a problem there keeping Windows 7 from installing. Right now the laptop will come on, and only runs well in any of the safe modes, if I try to boot it normally it'll try to finish the installation and freeze.
View 3 Replies
View Related
Feb 1, 2013
I tried loading windows 7 on my Dell Inspiron Mini, it says completing installation but after an hour it doesn't change, windows 7 hangs up on installation.
View 1 Replies
View Related
Nov 10, 2009
I thought I'd move with the times and picked up a copy of Windows 7 Ultimate. I had Vista installed before.
Booted from CD, delete/recreate partition and did a clean install.
The installer hangs on a black screen after the first reboot. Even left it overnight without progress. Forcing a reboot and going into Safe Mode the setup tries to continue, then comes up with a prompt saying 'Setup cannot run in Safe mode, rebooting your computer', whereupon it hangs again.
This is the sequence I tried:
1. Boot from CD, delete boot partition, new partition, clean install (HUNG)
2. Disconnect router, then as 1. (HANG)
3. Reset BIOS to factory defaults, then as 1. (HANG)
4. Disconnect external hard drive and printer, then as 1. (HANG)
5. Disabled on-board chips like sound, legacy USB etc, then as 1. (HANG)
I've tried booting to the CD and doing a 'repair windows' but that comes back without problems.
The only other thing I could think of is that the graphics card is incompatible... but I don't have onboard VGA and I don't have another card just lying around.
I've never had a problem doing a clean Windows install. I'm really disappointed they're making it so difficult. Does anyone have any suggestions? I might have to just go back to Vista...
View 9 Replies
View Related
Jun 7, 2012
Just bought a new hard drive due to my old one was failing. This is the same exact hard drive I had.Whenever I try installing windows 7, it "completes", then the screen blinks skips, and skips the "Create a user account" and just hangs at "Completing Installation". I thought I would give it a try and disable my gfx driver just to see if that would work.
View 9 Replies
View Related
Feb 3, 2010
My Dad is having problems upgrading to Windows 7 from the original Vista installation on his Medion MD8833 PC, using a Windows 7 Home Premium Upgrade Edition disk. He first tried the upgrade route from Vista and this seemed to go OK, until after the second or third reboot it would get to a point and then freeze at a blank screen, with the mouse cursor still visible. If left for a long period of time, the PC appears to go into sleep mode. Attempts to reboot at this point make it look like Windows 7 has been installed, at least partially, as it'll go through the usual Windows 7 load-up splash screens but he's unable to get to the part of the process where you have to enter your Windows 7 serial key or start setting up user accounts etc. He's tried F8 and booting into Safe Mode and various other modes but had no success here either. This often results in being told the installation process has not completed and attempts to revert to Vista are started. He's even resorted to wiping the hard drive completely (inc. recovery partition) and doing a fresh install, but has exactly the same problems.
View 8 Replies
View Related
Jan 31, 2011
I'm using my tv right now with it, it works fine hooked up to a TV. I've tried everything I know of. When the laptop first starts up, It flashes the red compaq screen, then goes black. Flashes the user login screen, then goes black 2 sec later. When I do the fn+f4, the screen flashes back on, everything looks cool, then 5 seconds later it goes black again. It's not just the light, it goes completely off. (Just on the laptop, external monitor works) I've tried restoring back to factory settings, recovery, and I'm not getting anywhere! I've even tried that black screen fix by Prevx. Oh and I also tried turning the laptop off, holding the power button, etc. It has windows 7. CQ61 I think is the model.
View 8 Replies
View Related
Mar 22, 2011
I am with a friend re-installing Windows 7 on his laptop. Unfortunately the laptop had been infected beyond repair by a virus/malware and would not boot past bios. When installing Windows 7 x32, I make it to the "Setup is starting..." screen and it does not continue. It is not the disk as I have used the same one to install it on my laptop. The laptop is a Dell Inspiron 1545 with 4gb of ram and 500gb HDD space.
View 14 Replies
View Related
Mar 17, 2012
I am building two servers with identical hardware ... Intel S5520HCT mother board, dual Xeon E5607 2.26GHz, Seagate SATA 2TB drive, 8GB Crucial memory and OCZ Agility SSD drives. I am using the onboard video and motherboard has been update with the latest BIOS.
But when I install Windows 7 Pro 64 to 50GB partition on the SATA drive, or to a single partition SSD ... the system hangs after the final reboot right after "Updating Registry" and "Starting Services" during the "Completing Installation" phase. The next input should be username and computer name ... but it never gets to that.
I have minimum hardware attached ... disabled networking in BIOS ... and tried with a number of different memory configurations ... etc .. etc ... but still the same result .. and I am now totally clueless. I even tested all my hardware on a Tyan S7025 board ... and there it installs without any issues.
View 9 Replies
View Related
Feb 10, 2013
I have a custom built pc, has quad core phenom processor 4gb ram. Gigabyte motherboard 500gb hard drive with windows 8 preview installed. And a formatted 250gb. I'm trying to install windows 7 on the formatted drive but every time off cd hangs on expanding files. So I thought I'd try USB stick. Got a 16gb cruzer blade. Formatted and made bootable. Windows on it. Will start via my computer but whenever I try booting it on standup I get an error about not being digitally signed. I've tried numerous things but will not boot from USB.
View 3 Replies
View Related
Jun 25, 2011
I just bought a Toshiba laptop that has Windows 7 Home Premium 64 bit installed on it. I have tried several times to install Office 2007 but for whatever reason it gets probably about 70 percent done and then it just hangs. At first I thought it was because the CPU sitting at 80-90 percent even before installing. I found some .NET services that were using up alot of that CPU so I disabled them and tried installing again but I still hung. I am getting no error messages so right now I am at a loss.
View 1 Replies
View Related
Sep 18, 2011
I had a power loss while installing a windows update about two months ago. Ever since then my system will hang either on logging off or shutting down.I have tried making a new user (No Help)it hangs in safe mode also.I also do not have a list of prior updates in control panel since this problem.The system works fine other than that.
View 1 Replies
View Related
Aug 14, 2010
I recently bought two ssds and striped them with my on board raid. Any ways i got windows 7 installed on it just fine ( after i got the driver issues worked out)But my problem is that I was looking forward to a fast boot time, but now every time i boot it go's to a screen that detects all of my storage devices.
View 7 Replies
View Related
Oct 25, 2009
I have a Toshiba laptop with 2 partitions- One with windows vista on it and one for backups. I want to join the two partitions and use the Windows 7 Upgrade pack and do a clean installation. How would i go about joining the two partitions? Am i able to use the upgrade version to install it?
View 9 Replies
View Related
Aug 12, 2012
I have windows 7 32bit and going to clean install the 64 bit version and the OS is on drive C (or partion C) so I copied my personal files to drive G,If i clean install windows 7 64 bit will it delete everything on my hard drive or will it just format the partion that has the os.
View 1 Replies
View Related