Windows 7 Clean Installation
Aug 12, 2012
I have windows 7 32bit and going to clean install the 64 bit version and the OS is on drive C (or partion C) so I copied my personal files to drive G,If i clean install windows 7 64 bit will it delete everything on my hard drive or will it just format the partion that has the os.
View 1 Replies
ADVERTISEMENT
Mar 18, 2012
i tried many time to reformat, then re-install win 7, pc re-started and stopped at the black screen with mouse cursor, i have tried F8 and start up repair, nothing helps.
View 1 Replies
View Related
Jul 23, 2011
I've done a clean installation of win 7 home for a mate on his laptop and want to use the product key that is underneath the laptop to complete the installation but the key has faded completely, I've emailed toshiba about it as its a toshiba model but ive had no response and its been 2 days. Is there any way to retrave it any quicker?
View 9 Replies
View Related
Mar 29, 2012
After formatting and setting a new partition using the installation disk, I install Windows 7, all goes well. But as soon as the installation is finished and my laptop restarts, it wont boot from the HDD. I keep getting error messages saying:
Windows Boot Manager
Windows failed to start....
File: ootBCD
Status: 0xc000000e
[Code].....
A copy of the current boot configuration data will be saved as c:ootcd.backup.0001
However when i hit the "ok go ahead and fix it then!"-button i get another error saying Startup Repair cant save the new boot options. Anyone know if i can fix this problem with BCDedit or bootrec.exe
View 3 Replies
View Related
Sep 13, 2012
Got Windows 7 Clean Installation over the computer's USB 3.0 port done without too many problems but with some hassle anyhow.For the clean installation I followed the procedure of GreGrocker Clean Reinstall - Factory OEM Windows 7 and put the whole installation onto a 4GB USB Flash Drive.From the computer's USB 2.0 ports there was no problem whatsoever and Windows 7 got installed very quickly.However, over the computer's USB 3.0 port things weren't easy. I finally got it done by uploading the proper USB 3.0 Root Hub and Controller drivers *.ini and *.sys files.Strangely enough, at first everything went well over the USB3 port and the WinPE environment with its RAM drive (X:) got deployed correctly. The only sensible explanation for that is that the computer's BIOS used the appropriate and build-in USB3 driver to do that part of the job.However, once the the installer (located in the X: drive) was about to install Window 7 on the system HDD, it asked me for a CD/DVD driver. I loaded the appropriate USB3 drivers at that stage and the installation process continued over the USB3 port.I had a closer look in the RAM drive (X:WindowsSystem32DriverStoreFileRepository), and indeed, there are no USB3 drivers present anywere in that folder, only USB2 drivers where in there, named: usb.inf_amd64... and usbpor.inf_amd64... So I was wondering, as USB3.0 is so common and the future standard, why aren't there any USB3 drivers in that folder present? Is there any possibility that the creators of the Windows 7 Clean Installation files (Digital River, or My Digital Live) could put USB3 drivers in the Win7CI package?
View 1 Replies
View Related
Jul 31, 2011
Purchased a Windows 7 64 bit Professional (academic). I have been originally using a Windows 7. However, the HDD had been giving me fits and has currently died. I'm not unable to activate my upgrade key since my new HDD does not have an old version of Windows to upgrade from. What should I do?
View 1 Replies
View Related
May 17, 2011
i was just wondering how i extract the files from an installation disc onto a flash drive, so i can use the flash drive to perform a clean install.Extract Files from Windows 7 Installation DVD.i already looked at this but it wasn't specific to my uses.
View 3 Replies
View Related
Jul 1, 2010
i had windows vista on my pc and i did a Clean Installation of windows 7.but now i have some problems,and i want to install windows 7 again.do i have to go back to windows vista? i have a windows 7 upgrade dvd.
View 9 Replies
View Related
Aug 3, 2012
I have a Samsung series 9 (NP9004XC) and I am upgrading the 128gb SSD that came with the computer to a Crucial M4 256GB mSATA. I am doing a clean install from a bootable USB that I created from the recovery disc that was included with the computer.I can load up setup but once I get to the part where I choose what disk I want to install it to I get an error. There is only one disk listed (Disk 0, Partition 1) and when I try to select that disk to install Windows to I get the error:"Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
View 7 Replies
View Related
Dec 1, 2011
I've been troubleshooting this computer for some time now. At first, I disabled RAID because of the blue screens and I found that one was bad and the second of the RAID 1 appeared fine. Well, I installed XP to ensure it would work and that was extremely slow. My client didn't have a disc to XP MCE, but instead bought Windows 7. The installation took about 12 hours and the system is often unresponsive. On resource monitor, the 2.13Ghz Conroe CPU is barely tapped and the 2GB of RAM is barely at 30%. However, the system takes forever to boot and it very often stops responding for a period of time.
I did my research and found out that this model--original specs--can handle 7 better than this. I told the client it was probably an HDD error, as it seems to hang everytime the system must access the HDD. I can't even run the Index to find out what the systems rating is. I mem tested the RAM and chkdsk the HDDs before removing the first because of its clear faults in its inability to hold an OS installation. I recently installed the 2.5.3 BIOS update, but I haven't had a chance to install a newer version of Intel Matrix Manager.
View 1 Replies
View Related
May 6, 2012
i clean installed new WINDOWS 7 PROFESSIONAL 32bit on laptop SONY VAIO VGN-FZ11Z.Operating system is genuine but downloaded from MSDN. But it is giving me a lot of process validation errors. Genrally these errors are coming on application launch. After that mostly application aborts or restarts.
View 2 Replies
View Related
Jun 18, 2012
i have built my computer with new parts and the installation stalls returning the errror code: 0x80070570
View 1 Replies
View Related
Aug 14, 2010
I recently bought two ssds and striped them with my on board raid. Any ways i got windows 7 installed on it just fine ( after i got the driver issues worked out)But my problem is that I was looking forward to a fast boot time, but now every time i boot it go's to a screen that detects all of my storage devices.
View 7 Replies
View Related
Oct 25, 2009
I have a Toshiba laptop with 2 partitions- One with windows vista on it and one for backups. I want to join the two partitions and use the Windows 7 Upgrade pack and do a clean installation. How would i go about joining the two partitions? Am i able to use the upgrade version to install it?
View 9 Replies
View Related
May 5, 2012
i had clean installation of windows 7 professional sp1 32, on VAIO VGN-FZ11Z.it is giving me many validation errors here n then, mostly when i launch an application or setup file. I have not installed any drivers for it until now bcz im not finding them. The windows is also flagging for driver of firmware parser driver but im not finding it anywhere on support of Vaio website. Some error messages and snapshot of device manager attached below. Kindly help me out . also tell me which drivers i must install for sony vaio vgn-fz11z for Windows 7.
View 5 Replies
View Related
Aug 20, 2012
i am going to install a factory oem windows 7 on my hp laptop following the gregrocker tutorial. now when i check the hp support site for drivers and softwares, i am confused on what to install and what to not.
1. Driver - Audio High-Definition (HD) Audio Driver
2. Driver - Chipset Intel Chipset Installation Utility and Driver.Intel Management Engine Interface (MEI) Driver.Intel USB 3.0 Host Controller Driver
3. Driver - Graphics NVIDIA High-Definition (HD) Graphics Driver Intel High-Definition (HD) Graphics Driver
4. Driver - Keyboard, Mouse and Input Devices Validity Fingerprint Sensor Driver
View 4 Replies
View Related
Aug 21, 2012
yo guys i am going to install a factory oem windows 7 on my hp laptop following the gregrocker tutorial. now when i check the hp support site for drivers and softwares, i am confused on what to install and what to not. [code]
View 2 Replies
View Related
Jun 21, 2009
I'm using Window7 RC 7100 , after clean installation and while connection my game controller i went to control panel but i couldn't find Game Controller Setting ? is it hidden if so how to make it visible and if not how can i get it.
View 9 Replies
View Related
Apr 19, 2012
i was wondering if anyone has any programs they could recommend to use to wipe a hard drive clean before reinstalling windows 7, I noticed you have this CCleaner 3 link on here CCleaner - Download.com If i put that on a disk and started it up as i would to reinstall can that wipe the disk clean?
View 9 Replies
View Related
Nov 11, 2009
So i'm trying to do a clean install of windows 7 (x36) from XP that im currently running. i've burnt the iso down on a dvd and it boots fine and the installation runs normally. I'm getting through all the steps within the installation when it at last says something about that it's done and it's going to restart for the first use of windows 7. Now i'm getting my problem.
The computer starts up and goes through the memory testing and such but just as it's about to start windows 7 i'm getting a black screen and my monitor says "No signal - blabla" and 3 seconds later it restarts itself. If i don't do anything now my computer loops this restarting on and on...
So i've tried to install it with removing my two 512mb RAMS and only have two 1gb of the same brand. Didn't help.
View 9 Replies
View Related
Jan 26, 2012
so for about 5 days, i have experienced random and sporadic bsod, before that it was normal and stable. i did my installation on my os on october 2011. i'm quite sure it's graphic driver but i've clean installed almost 10 times and still crashing. it crashes randomly when i opened a Internet video or open a video file, everything regarding to video. i'm already feeling hopeless here
my specs are
win 7 64 bit home premium (not oem)
gigabyte x58 ud3r
i7 920
gigabyte gtx 480
asus xonar essence stx
3x2 ocz ram 1033 mhz
my os is located on my ssd which is an intel 510 120 gb
i got 1 tb hard drive caviar green
i got 500 gb hard drive caviar green
and 250 gb seagate (really old, it's ide iirc)
i've uploaded the minidump and system performance, i hope i did right on the attachment (first time posting here).
View 2 Replies
View Related
Dec 19, 2012
My daughters CQ61 required a clean install after repair. Windows 7 jus goes through the normal install process and hangs at completeing installation. I'm not a Noob but not a Geek either. I can only assume the drive is fine as it is running fine in the T400 IMB i am using now. Now here is the strange bit..... When i was just starting out i to had a CQ61 and it too needed a clean install and it did the same for months with friends in th know looking and trying to. In the end i send off for the factory software discs and tey went on straight away with win7 working fine. It was literally restored to new. I passed on said disks when i sold said CQ61 adising the guy never to go down the road i had. Now the software discs are no longer available from HP and There is none on torrents anywhere. I cannot accept that this is the only way to install clean install. If it was that critical to have the discs they would send them out with the new machine. So thats muti attempts by multiple people on 2 identical machines presenting the same hang. One was solved with the Sowfwaredisks provided by HP and are no longer available. Should have copied them i know but never thought i would be looking down the same barrel of the same gun.
View 1 Replies
View Related
Feb 13, 2013
I am getting an error "cannot install" 0x80070714 when I try to install windows 7 into a clean disk and the installation just stops..
View 3 Replies
View Related
Jan 3, 2010
How to Clean or Clean All a Disk with the Diskpart Command ?
View 0 Replies
View Related
Jun 2, 2011
I have just got Windows 7 Ultimate.I accept the Licence Agreement, set my partitions as i want them but when it gets to the expanding files part it will hang at 0%. This happens on both the 32 & 64 bit disc.This is a brand new purchase which I opened it about an hour ago.The laptop has a 400GB HD and 2GB of ram. It came with Home Prem x64 pre-installed, So the hardware meets the requirements.What seems to be the problem?
View 9 Replies
View Related
Jun 29, 2011
I just bought a new hard drive and a brand new Windows 7 Home Premium 64bit disc and I am doing a clean install on the new hard drive. it seems that everything is going normal, but at a random time during the installation, the computer just shuts off.sometimes it doesn't even get to the installation when it shuts off. sometimes it shuts off in the middle of the "windows is loading files..." black screen. there are no beeps when it shuts off or when I turn it back on. there are also no error codes.whenever i turn it back on it simply acts as if it never tried to install windows and starts the boot all over from the disc
View 9 Replies
View Related
May 16, 2012
So i have a new SSD Corsair Force 3 240 gig and all I want to do is install Windows 7 Pro on it. This board does not support parted magic (cannot wake from sleep and there are no onboard video to wake up to) so ive resorted to clean all.I have not been able to successfully boot the OS on the SSD. I never intended on setting up raid but apparently all the literature i see is on raid. I created a USB install disk as reccomended onto a 8gig ntfs primary active did the bootsect /nt60 X: and it successfully worked copied the cd over to the flash drive and copied the rste drivers in a folder called drivers My SSD is installed on port 1 6gig sata intel (as this board doesnt have marvel apparrently) My DVD is installed on 3gig Sata port 6 I set up Raid in the bios as reccomended by others (as this is the only way to install ssd?).
Nothing UEFI is enabled There are no other drives hooked up to the computer. Just SSD, USB cordless mouse, keyboard and no network cord or WIFI i started with a clean ssd as reccomended my bios recognized the ssd on post i booted into the win 7 install (MBR not uefi) i loaded the 64 bit rste drivers from asus as reccomended by others i left the machine to install the usb then booted into windows install (for whatever reason) i pushed f8 to boot my corsair windows brings up an error on a black screen File: windows/system32/drivers/adpahci.sys driver did not load Status: oxc0000221 Info: Windows Failed to load because of a critical system driver is missing or corrupt
View 2 Replies
View Related
Sep 13, 2009
I am installing Windows 7 (Custom installation initiated from Windows XP) but I get the following error message when the installation is on the "Installing updates" step of the installation:
"Setup cannot continue due to a corrupted installation file. Contact the vendor of your Windows installation disc or your system administrator for assistance."
Do you have any idea what the problem may be with the installation? Is there a way to see what file that may be corrupted?
I have tried to burn the DVD in low speed, but the error appears anyway. I have a MSI K8T Neo2-Fir mainboard and the Windows 7 upgrade advisor application says that my hardware is okay for upgrading.
View 9 Replies
View Related
Apr 16, 2012
First, my laptop is a Aspire 5250-BZ853. I received it back in October, I think...may've been earlier. But anyhow, it was working just fine yesterday until I did a Windows Update. I had to restart, and it was fine again. But then it began running sluggishly slow, and just terrible overall so I restarted it once more and that was when the problems began.
This entire day, this has been driving me nuts. I have important files on here, and I backed up most on my external harddrive a bit ago but there were a few I missed and hadn't the chance to get (ironically enough the most important, papers and such.) At first, it said my password was wrong -- as if someone had changed it! I restarted it once more, thinking it an error or something, and did that again so I restarted it again. Finally, it worked but I think it logged me in as safe mode somehow. After that, it restarted on its own and began this loop. I did a LOT of searching on Google until finally someone suggested to someone else to try pressing "ALT + F10" I think it was as it was starting, and finally I made progress. Before that, it was just going into a constant rebooting loop and I couldn't even log into safe mode. Trying to reset it back to a time it was working was futile, because it said there was no recovery time there! So that shot that idea down. At last, I got somewhere.as well. I clicked the reset to factory settings, but still keep all the files (and they would be saved to "C:Backup" and I thought it had finally worked. But now as it reinstalls, I got an error saying something about how it needed to restart or something...so when I clicked "okay" it began again, and finally it all just came to a stop on "Windows could not complete the installation. To install Windows on this computer, restart the installation."
View 1 Replies
View Related
Feb 9, 2012
Ok, my parents tried fixing their own computer. They tried the clean reinstall but the windows 7 home premium looks like it is in safe mode and it keeps saying "no internet connection". I looked at their partitions but I'm only seeing one... the (OEM)... I tried reinstalling from the "reinstall" dvd they got with the computer but I don't think they have an OS at all now.or am I gonna have to buy them a new windows 7 program??
View 14 Replies
View Related
Apr 6, 2012
i've had enough of 7, I use my PC for music and after months of installing/uninstalling/re installing/researching/driver checking etc. i've decided i'm just not going to get things working with 7.
I have my XP disc and i'm ready to do a clean install, but i'm struggling to get it going... what do I do!? Inserting the XP disc brings up the autopay but the option to install is greyed out, which I understand as it's a step down. However, when I press f12 on booting to try to boot my pc from disc it just locks on the boot menu. What can I do to get a clean install of XP going?
View 14 Replies
View Related