Many Validation Errors After Clean Installation?
May 5, 2012
i had clean installation of windows 7 professional sp1 32, on VAIO VGN-FZ11Z.it is giving me many validation errors here n then, mostly when i launch an application or setup file. I have not installed any drivers for it until now bcz im not finding them. The windows is also flagging for driver of firmware parser driver but im not finding it anywhere on support of Vaio website. Some error messages and snapshot of device manager attached below. Kindly help me out . also tell me which drivers i must install for sony vaio vgn-fz11z for Windows 7.
View 5 Replies
ADVERTISEMENT
May 6, 2012
i clean installed new WINDOWS 7 PROFESSIONAL 32bit on laptop SONY VAIO VGN-FZ11Z.Operating system is genuine but downloaded from MSDN. But it is giving me a lot of process validation errors. Genrally these errors are coming on application launch. After that mostly application aborts or restarts.
View 2 Replies
View Related
Oct 18, 2011
I just installed a clean copy of Windows 7 professional yesterday (legitimate). I have been plagued with a few problems and they are as follows:Error messages appear when I try to download things, open certain things, etc. A couple of the errors that appear are:When I try to download things like drivers, it will say I need to restart so I do and nothing is fixed. How do I fix these errors?P.S. I checked the validate my windows 7 online when I installed it and windows is activated as "genuine".My second problem is a high pitched noise coming from my motherboard, I believe it might be my ATX 12v 2x4 but I could be mistaken, it is in that general area.ower is not an issue as I am running a Corsair TX 750 and I'm not running anything but an internet browser and a graphics card. More importantly, I used this setup with windows xp and it was fine. The only thing that I changed was that I rearranged the cords and wiring to make the case neater.
What's the problem and how do I fix it?My third problem is that when I right click on the desktop, it takes about 30 seconds for the menu to appear which is ridiculous as my WEI rating is 7.6 (disclaimer: I know WEI is not a proper benchmark but you get the idea). I'm running an SSD (crucial M4 with 0009 firmware), i7 2600k , gigabyte gtx 570 and 16GB of kingston hyper X ram 1600mhz.
View 17 Replies
View Related
Oct 26, 2011
I am building a budgetpc. I bought new in box an AMD X3 450 and a asus m4a78lt-mle mobo, and 4gb of DDR3 1333mhz memory Kingston. First off out of the box the processor posts as a amd x4 b50. Not sure if they packaged the wrong one or the mobo is reading wrong. I don't want to pull the cpu fan back off tok read the cpu. I did a clean install of Windows 7 ultimate. After install finished I went to install drivers, well the mobo drivers cd was not in the mobobox so I planned on installing usb wireless nic and downloading drivers. This is where the problem starts.
When I click on the exe install file I get, a cmd box popup that says program to big to fit into memory. So I cant install any drivers, I downloaded alla the mobo drivers from asus on a thumb drive and copied over to the hard drive. Tried to run those files and i get the same error message. So I reinstalled Windows 7 this time the 64bit version and this time i still get the same error but on other exe files I get a message saying that they are not 64 bit files. Even though I downloaded the 64bit version. So I am not sure what is up. All parts were new in box.
View 1 Replies
View Related
May 8, 2010
I am trying to custom/clean install windows 7 64bit and when it restarts after supposedly completing installation it says the system has restarted unexpectedly or I get a blue scree error that causes another restart. This occurs on the 2nd restart after it returns to the completing installation stage
View 3 Replies
View Related
Feb 7, 2012
I took a client's HDD, which could not install Windows 7 due to lack of CD drive, and tried to install Win 7 using my home PC. At first, I tried to install but the installation disk said it couldn't locate the correct directory. I then unplugged my two personal harddrives whilst keeping the blank one in while the computer was still on. It wasn't until I restarted my PC that I was able to install. But at the set up your PC stage (name your PC, set password, etc) I turned the computer off, hoping to continue the process on the actual PC that I was going to keep it in so my client could customize it. After plugging my two personal HDD's back in, which were working fine just 15 minutes prior to this, I discovered that neither of them could boot. They just hung in the Windows 7 loading page. On safe mode, they would get stuck on classpnp.sys. Now, my computer just says that disk cannot be read, and that I should press CTRL+ALT+DEL to restart.
View 1 Replies
View Related
Dec 6, 2012
I lost a few files and so i installed and tried a couple of recovery softwares. Now when i click on the Start menu, or open My computer, or even open any program, it takes a very long time to load. I uninstalled the recovery sfotwares with Your uninstalled program. But the problem still remains.
View 3 Replies
View Related
Oct 7, 2011
Last week I tried to install IE9 after some annoying pop-ups. The installation got interrupted somehow. I didn't care about that because I would never use that browser anyway.
Soon I realised I was not able to use Windows Live Messenger anylonger. After logging in, an error occurs: "Can't find ordinal 379 in DLL-files iertutil.dll" (translated from dutch, so it could be a little different in English). After this error, msn closes directly. I did some research and I read I could fix this problem by editing some internetoptions in the control panel. But when I click on internetoptions, nothing happens.
MSN isn't the only application giving this error. I experienced the same error in some other applications like paint.NET.
Also, I can't open VMWare anylonger. It runs in processes but on screen nothing happens. Skype closes directly after crashing, WOW won't start anylonger,... These are just some of the problems I experienced in the last 6 days.
View 6 Replies
View Related
Jul 6, 2010
I am having trouble installing Windows XP Mode on a Dell E4300 laptop with Windows 7 Pro 32-bit. For the record, I have installed XPM on multiple occasions without any issues at all, until now. Upon launching the XP Mode installer, it starts to deploy the temporary files but hangs at expanding 'sourcesxpm'. Then I get the following error: 'This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package'.
If I try multiple times, I am sometimes able to get beyond that point where the XP Mode setup screen shows up, but then I receive an error during the installation process that says: 'Source file not found: D:xxxxxxxxxxxxxxsourcesXPM. Verify that the file exists and that you can access it'. I've checked everything I could with no avail permissions, Hardware Virtualization. I also installed it on an identical machine with the same setup. Then I got a hunch that the Windows Installer might have been corrupted. So I ran the command to un-install it (msiexec /uninstall) & got the same error message as above.
View 1 Replies
View Related
Aug 14, 2010
I recently bought two ssds and striped them with my on board raid. Any ways i got windows 7 installed on it just fine ( after i got the driver issues worked out)But my problem is that I was looking forward to a fast boot time, but now every time i boot it go's to a screen that detects all of my storage devices.
View 7 Replies
View Related
Oct 25, 2009
I have a Toshiba laptop with 2 partitions- One with windows vista on it and one for backups. I want to join the two partitions and use the Windows 7 Upgrade pack and do a clean installation. How would i go about joining the two partitions? Am i able to use the upgrade version to install it?
View 9 Replies
View Related
Aug 12, 2012
I have windows 7 32bit and going to clean install the 64 bit version and the OS is on drive C (or partion C) so I copied my personal files to drive G,If i clean install windows 7 64 bit will it delete everything on my hard drive or will it just format the partion that has the os.
View 1 Replies
View Related
Mar 18, 2012
i tried many time to reformat, then re-install win 7, pc re-started and stopped at the black screen with mouse cursor, i have tried F8 and start up repair, nothing helps.
View 1 Replies
View Related
Aug 20, 2012
i am going to install a factory oem windows 7 on my hp laptop following the gregrocker tutorial. now when i check the hp support site for drivers and softwares, i am confused on what to install and what to not.
1. Driver - Audio High-Definition (HD) Audio Driver
2. Driver - Chipset Intel Chipset Installation Utility and Driver.Intel Management Engine Interface (MEI) Driver.Intel USB 3.0 Host Controller Driver
3. Driver - Graphics NVIDIA High-Definition (HD) Graphics Driver Intel High-Definition (HD) Graphics Driver
4. Driver - Keyboard, Mouse and Input Devices Validity Fingerprint Sensor Driver
View 4 Replies
View Related
Jul 23, 2011
I've done a clean installation of win 7 home for a mate on his laptop and want to use the product key that is underneath the laptop to complete the installation but the key has faded completely, I've emailed toshiba about it as its a toshiba model but ive had no response and its been 2 days. Is there any way to retrave it any quicker?
View 9 Replies
View Related
Mar 29, 2012
After formatting and setting a new partition using the installation disk, I install Windows 7, all goes well. But as soon as the installation is finished and my laptop restarts, it wont boot from the HDD. I keep getting error messages saying:
Windows Boot Manager
Windows failed to start....
File: ootBCD
Status: 0xc000000e
[Code].....
A copy of the current boot configuration data will be saved as c:ootcd.backup.0001
However when i hit the "ok go ahead and fix it then!"-button i get another error saying Startup Repair cant save the new boot options. Anyone know if i can fix this problem with BCDedit or bootrec.exe
View 3 Replies
View Related
Sep 13, 2012
Got Windows 7 Clean Installation over the computer's USB 3.0 port done without too many problems but with some hassle anyhow.For the clean installation I followed the procedure of GreGrocker Clean Reinstall - Factory OEM Windows 7 and put the whole installation onto a 4GB USB Flash Drive.From the computer's USB 2.0 ports there was no problem whatsoever and Windows 7 got installed very quickly.However, over the computer's USB 3.0 port things weren't easy. I finally got it done by uploading the proper USB 3.0 Root Hub and Controller drivers *.ini and *.sys files.Strangely enough, at first everything went well over the USB3 port and the WinPE environment with its RAM drive (X:) got deployed correctly. The only sensible explanation for that is that the computer's BIOS used the appropriate and build-in USB3 driver to do that part of the job.However, once the the installer (located in the X: drive) was about to install Window 7 on the system HDD, it asked me for a CD/DVD driver. I loaded the appropriate USB3 drivers at that stage and the installation process continued over the USB3 port.I had a closer look in the RAM drive (X:WindowsSystem32DriverStoreFileRepository), and indeed, there are no USB3 drivers present anywere in that folder, only USB2 drivers where in there, named: usb.inf_amd64... and usbpor.inf_amd64... So I was wondering, as USB3.0 is so common and the future standard, why aren't there any USB3 drivers in that folder present? Is there any possibility that the creators of the Windows 7 Clean Installation files (Digital River, or My Digital Live) could put USB3 drivers in the Win7CI package?
View 1 Replies
View Related
Jul 31, 2011
Purchased a Windows 7 64 bit Professional (academic). I have been originally using a Windows 7. However, the HDD had been giving me fits and has currently died. I'm not unable to activate my upgrade key since my new HDD does not have an old version of Windows to upgrade from. What should I do?
View 1 Replies
View Related
Aug 21, 2012
yo guys i am going to install a factory oem windows 7 on my hp laptop following the gregrocker tutorial. now when i check the hp support site for drivers and softwares, i am confused on what to install and what to not. [code]
View 2 Replies
View Related
Jun 21, 2009
I'm using Window7 RC 7100 , after clean installation and while connection my game controller i went to control panel but i couldn't find Game Controller Setting ? is it hidden if so how to make it visible and if not how can i get it.
View 9 Replies
View Related
May 17, 2011
i was just wondering how i extract the files from an installation disc onto a flash drive, so i can use the flash drive to perform a clean install.Extract Files from Windows 7 Installation DVD.i already looked at this but it wasn't specific to my uses.
View 3 Replies
View Related
Apr 19, 2012
i was wondering if anyone has any programs they could recommend to use to wipe a hard drive clean before reinstalling windows 7, I noticed you have this CCleaner 3 link on here CCleaner - Download.com If i put that on a disk and started it up as i would to reinstall can that wipe the disk clean?
View 9 Replies
View Related
Nov 11, 2009
So i'm trying to do a clean install of windows 7 (x36) from XP that im currently running. i've burnt the iso down on a dvd and it boots fine and the installation runs normally. I'm getting through all the steps within the installation when it at last says something about that it's done and it's going to restart for the first use of windows 7. Now i'm getting my problem.
The computer starts up and goes through the memory testing and such but just as it's about to start windows 7 i'm getting a black screen and my monitor says "No signal - blabla" and 3 seconds later it restarts itself. If i don't do anything now my computer loops this restarting on and on...
So i've tried to install it with removing my two 512mb RAMS and only have two 1gb of the same brand. Didn't help.
View 9 Replies
View Related
Jul 1, 2010
i had windows vista on my pc and i did a Clean Installation of windows 7.but now i have some problems,and i want to install windows 7 again.do i have to go back to windows vista? i have a windows 7 upgrade dvd.
View 9 Replies
View Related
Aug 3, 2012
I have a Samsung series 9 (NP9004XC) and I am upgrading the 128gb SSD that came with the computer to a Crucial M4 256GB mSATA. I am doing a clean install from a bootable USB that I created from the recovery disc that was included with the computer.I can load up setup but once I get to the part where I choose what disk I want to install it to I get an error. There is only one disk listed (Disk 0, Partition 1) and when I try to select that disk to install Windows to I get the error:"Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
View 7 Replies
View Related
Dec 1, 2011
I've been troubleshooting this computer for some time now. At first, I disabled RAID because of the blue screens and I found that one was bad and the second of the RAID 1 appeared fine. Well, I installed XP to ensure it would work and that was extremely slow. My client didn't have a disc to XP MCE, but instead bought Windows 7. The installation took about 12 hours and the system is often unresponsive. On resource monitor, the 2.13Ghz Conroe CPU is barely tapped and the 2GB of RAM is barely at 30%. However, the system takes forever to boot and it very often stops responding for a period of time.
I did my research and found out that this model--original specs--can handle 7 better than this. I told the client it was probably an HDD error, as it seems to hang everytime the system must access the HDD. I can't even run the Index to find out what the systems rating is. I mem tested the RAM and chkdsk the HDDs before removing the first because of its clear faults in its inability to hold an OS installation. I recently installed the 2.5.3 BIOS update, but I haven't had a chance to install a newer version of Intel Matrix Manager.
View 1 Replies
View Related
Jan 26, 2012
so for about 5 days, i have experienced random and sporadic bsod, before that it was normal and stable. i did my installation on my os on october 2011. i'm quite sure it's graphic driver but i've clean installed almost 10 times and still crashing. it crashes randomly when i opened a Internet video or open a video file, everything regarding to video. i'm already feeling hopeless here
my specs are
win 7 64 bit home premium (not oem)
gigabyte x58 ud3r
i7 920
gigabyte gtx 480
asus xonar essence stx
3x2 ocz ram 1033 mhz
my os is located on my ssd which is an intel 510 120 gb
i got 1 tb hard drive caviar green
i got 500 gb hard drive caviar green
and 250 gb seagate (really old, it's ide iirc)
i've uploaded the minidump and system performance, i hope i did right on the attachment (first time posting here).
View 2 Replies
View Related
Jun 18, 2012
i have built my computer with new parts and the installation stalls returning the errror code: 0x80070570
View 1 Replies
View Related
Dec 19, 2012
My daughters CQ61 required a clean install after repair. Windows 7 jus goes through the normal install process and hangs at completeing installation. I'm not a Noob but not a Geek either. I can only assume the drive is fine as it is running fine in the T400 IMB i am using now. Now here is the strange bit..... When i was just starting out i to had a CQ61 and it too needed a clean install and it did the same for months with friends in th know looking and trying to. In the end i send off for the factory software discs and tey went on straight away with win7 working fine. It was literally restored to new. I passed on said disks when i sold said CQ61 adising the guy never to go down the road i had. Now the software discs are no longer available from HP and There is none on torrents anywhere. I cannot accept that this is the only way to install clean install. If it was that critical to have the discs they would send them out with the new machine. So thats muti attempts by multiple people on 2 identical machines presenting the same hang. One was solved with the Sowfwaredisks provided by HP and are no longer available. Should have copied them i know but never thought i would be looking down the same barrel of the same gun.
View 1 Replies
View Related
Sep 16, 2011
I recently pulled apart an old XP - cleaned it up (lot of dust) and junk files put extra RAM, renewed the thermal compound, and now the thing starts up with a window asking to go online and validate something that has been on it for years.
View 4 Replies
View Related
Sep 27, 2009
Currently on two different machines one x86, one x64, the current setup is dual boot with Vista & RC 7100 on both. Vista was installed first and is at the beginning of the physical disk on the first partition on each. What I would like to know is, for either system, when I do a clean install from upgrade media, will the setup program overwrite my qualifying install of Vista on the first partition by default, or can I select a different partition for the install choosing to tripple boot if I desire?
I've been searching the forums and cannot seem to nail this one down.
View 5 Replies
View Related
