Windows 7 Validation Errors?

Oct 18, 2011

I just installed a clean copy of Windows 7 professional yesterday (legitimate). I have been plagued with a few problems and they are as follows:Error messages appear when I try to download things, open certain things, etc. A couple of the errors that appear are:When I try to download things like drivers, it will say I need to restart so I do and nothing is fixed. How do I fix these errors?P.S. I checked the validate my windows 7 online when I installed it and windows is activated as "genuine".My second problem is a high pitched noise coming from my motherboard, I believe it might be my ATX 12v 2x4 but I could be mistaken, it is in that general area.ower is not an issue as I am running a Corsair TX 750 and I'm not running anything but an internet browser and a graphics card. More importantly, I used this setup with windows xp and it was fine. The only thing that I changed was that I rearranged the cords and wiring to make the case neater.

What's the problem and how do I fix it?My third problem is that when I right click on the desktop, it takes about 30 seconds for the menu to appear which is ridiculous as my WEI rating is 7.6 (disclaimer: I know WEI is not a proper benchmark but you get the idea). I'm running an SSD (crucial M4 with 0009 firmware), i7 2600k , gigabyte gtx 570 and 16GB of kingston hyper X ram 1600mhz.

View 17 Replies


ADVERTISEMENT

Process Validation Errors After Clean Installation Of Windows 7?

May 6, 2012

i clean installed new WINDOWS 7 PROFESSIONAL 32bit on laptop SONY VAIO VGN-FZ11Z.Operating system is genuine but downloaded from MSDN. But it is giving me a lot of process validation errors. Genrally these errors are coming on application launch. After that mostly application aborts or restarts.

View 2 Replies View Related

Many Validation Errors After Clean Installation?

May 5, 2012

i had clean installation of windows 7 professional sp1 32, on VAIO VGN-FZ11Z.it is giving me many validation errors here n then, mostly when i launch an application or setup file. I have not installed any drivers for it until now bcz im not finding them. The windows is also flagging for driver of firmware parser driver but im not finding it anywhere on support of Vaio website. Some error messages and snapshot of device manager attached below. Kindly help me out . also tell me which drivers i must install for sony vaio vgn-fz11z for Windows 7.

View 5 Replies View Related

Windows 7 Validation Error On Reinstall On New PC?

Dec 4, 2012

I recently lost my desktop (it died) I found an old but still usable one and installed win 7 from my original installation cd. (i purchased a cd with 3 licenses). I tried the phone activation only to be told i had excedded my number of licenses. I assumed that when my old pc died i could install on a new machine, (maybe not). Who can I contact at MS to explain that one of my 3 installs is now DEAD and I'm not trying to steal a 4th install?

View 2 Replies View Related

Windows 7 Validation Failure - Copy Not Genuine

Feb 29, 2012

I have a genuine copy of windows 7 and the validation tool has ran on several occasions without a problem. I purchased it from PC World prior to when windows 7 was first released so that I received my copy asap. I'm now getting a pop up window which says my copy isn't genuine even though I know it is, can this be resolved without a reinstall?

View 5 Replies View Related

Windows Didn't Pass Genuine Validation?

Jan 31, 2011

I bought the Windows Product key from Ebay and after some days I am getting this Pop up message. How can I get rid of this Pop-up message?

[URL]

View 13 Replies View Related

Have Genuine Windows But Validation Tool Doesn't Work

Oct 15, 2012

my computer is brand new but I can't get the Validation Tool to work. It gives me the window to check my clock and that the tool is no longer supported. I have an Acer Aspire M3470G Win 7 Home Premium 64 bit. I am having a lot of errors but the Windows trouble shooter says everything is fine.I do know a little about computers and am willing to learn.

View 6 Replies View Related

Windows 7 Not Genuine Error Validation Code 0x8004FE21

Jan 8, 2013

I upgraded the hard drive in my Acer Aspire notebook a month ago, successfully activated Windows and was running fine until a couple of days ago. Now I am getting the seemingly common (in this forum) Windows not Genuine error. I have attached the output from MGADiag below.

For reference, the Acer Aspire notebook is 3-years old, came preinstalled with Vista together with a free upgrade to Windows 7 when it launched, which I installed 2 years ago. Running fine the last 3 years.

Code: Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Code: 0x8004FE21
Cached Online Validation Code: 0x0

[Code].....

View 7 Replies View Related

Getting Rid Of Validation Window

Sep 16, 2011

I recently pulled apart an old XP - cleaned it up (lot of dust) and junk files put extra RAM, renewed the thermal compound, and now the thing starts up with a window asking to go online and validate something that has been on it for years.

View 4 Replies View Related

Upgrade Install / Validation Question

Sep 27, 2009

Currently on two different machines one x86, one x64, the current setup is dual boot with Vista & RC 7100 on both. Vista was installed first and is at the beginning of the physical disk on the first partition on each. What I would like to know is, for either system, when I do a clean install from upgrade media, will the setup program overwrite my qualifying install of Vista on the first partition by default, or can I select a different partition for the install choosing to tripple boot if I desire?

I've been searching the forums and cannot seem to nail this one down.

View 5 Replies View Related

Getting Task Validation Error Message

Feb 8, 2013

I never to into the Task Scheduler but today I did and got the following: "Task validation task: The task image is corrupt or has been tampered with" Seems to be a fairly common error from from what I can determine - and I have no experience with dealing with the registry and am reluctant to do so.

View 1 Replies View Related

Internet Explorer Has Encountered A Validation Error

May 8, 2009

I have just installed Win 7 RC onto my Fujitsu Lifebook and am receiving the above error repeatedly when trying to use Internet Explorer (also get similar error for Windows Explorer). When the error appears it lists the "process name" (iexplore.exe or explorer.exe), "Module name" (eg mshtml.dll - this varies) and "assert offset" (eg 004DEB6E - also varies) along with 3 buttons "Ignore Once", "Ignore Always" and "Do not ignore".

If I select "do not ignore" the windows error reporting process kicks in but does not find a solution and will ocassionally restart IE or kick me out completely. Selecting "Ignore Once" will often lead to a number of similar popups with either different module or assert offsets.

I have gone through device manager to ensure all my drivers are properly updated and have also tried to reinstall to no avail.

Not sure if it is connected but Windows Update does not appear to find any updates either even if I try and install Office 2007 and look for updates to that (I know it should find SP2 at least).

View 9 Replies View Related

Windows Did Not Pass Windows 7 Validation?

Feb 5, 2013

When I install microsoft security essential ,My computer say that Window didi not pass genuine Windows Validation.You may be a victim of software counterfeiting.How to handle

View 2 Replies View Related

Windows 7 Installation Errors?

May 8, 2010

I am trying to custom/clean install windows 7 64bit and when it restarts after supposedly completing installation it says the system has restarted unexpectedly or I get a blue scree error that causes another restart. This occurs on the 2nd restart after it returns to the completing installation stage

View 3 Replies View Related

Windows Crashes And Comes As Different Errors

Feb 11, 2012

so i recently built my gaming desktop and every now and then windows crashes and i get a blue screen which says dumping physical memory. i read the thread about what i should upload in order to get help however i dont know how to run a system health report as i cant find the program in start.i have disabled the auto restart and have managed to see two of the errors stop: 0x0000004e and stop: 0x0000001a

View 3 Replies View Related

Windows 7 Giving Errors

Feb 23, 2011

My Windows 7 system has begun to post some errors which I don't know how to correct: "Cannot load microsoft.net/framework/v4.030319/mscoreei.dll" and Service Pak 1 for Windows 7 installation failed.

View 1 Replies View Related

Odd Windows 7 Installation Errors

Feb 7, 2012

I took a client's HDD, which could not install Windows 7 due to lack of CD drive, and tried to install Win 7 using my home PC. At first, I tried to install but the installation disk said it couldn't locate the correct directory. I then unplugged my two personal harddrives whilst keeping the blank one in while the computer was still on. It wasn't until I restarted my PC that I was able to install. But at the set up your PC stage (name your PC, set password, etc) I turned the computer off, hoping to continue the process on the actual PC that I was going to keep it in so my client could customize it. After plugging my two personal HDD's back in, which were working fine just 15 minutes prior to this, I discovered that neither of them could boot. They just hung in the Windows 7 loading page. On safe mode, they would get stuck on classpnp.sys. Now, my computer just says that disk cannot be read, and that I should press CTRL+ALT+DEL to restart.

View 1 Replies View Related

Errors In Windows 7(0x0000005)?

Aug 22, 2012

I have a problem with my pc.. HP pavilon dv4- 1318TU having 4 gb ram and 320 hard disk, dore2 deo processer ... now im going to explian every thing... my pc hav windows vista inbuilt.... i upgraded... to win7 ultimate.. manytimes.. and now this time 1 yr later... i installed win7 home premium... 3 days b4.. and now too.... when ever i open any application .. this appears... THE APPLICATION WAS UNABLE TO START CORRECTLY (0X0000005).CLICK OK TOCLOSE THE APPLICATION ANTIVIRUS is not working too.. i did disck check.... NO ERRORS ... now m trying to install a window AGAIN... it is not working toooo.

View 4 Replies View Related

Errors In Windows 7(0x0000005)?

Feb 14, 2013

canīt open PowerPoint

View 1 Replies View Related

Windows 7 Ultimate Install Errors

Feb 22, 2010

I bought Windows 7 Ultimate which comes with the 32bit and 64bit dvd's. Right now I have the Windows 7 RC1 32bit installed but as we all know its gonna start acting up in March since it will start to expire.As the computer boots up with the dvd in the drive, all works fine until it starts asking for the dvd drivers. Yes, my drive is IDE. Not SATA. Do I really have to go buy a SATA cabled dvd drive to install windows 7? Second, is the fact that I have a 32 bit OS now, affecting the fact that it can't find the drivers? Is it because it's looking for 64 bit drivers when I have a 32 bit os now? I've already read up on this issue for the dvd drivers and it seems it was coming up alot even before the RTM versions and it seemed that redownloading an ISO was the solution aside from getting a SATA drive. But, I didn't download my copy. I have a real disc. I've already tried switching in the BIOS where my drive is set to RAID and moving it to IDE and then to the other option on there and no luck so far on getting it installed.

View 9 Replies View Related

Windows 7 Live Mail Errors?

Jun 17, 2012

I've been reading a lot of posts on various sites about Windows Live Mail not opening email links, EG: Application does not exist. I've had this problem my self but none of the posted solutions worked. Consequently i spent hours trying to fix it. Everything was listed in the Default Programs but I still could not open my email links. Then, I noticed in the Mail Options a little notice which said. "Internet Explorer 9 64bit can not be the default browser". Strange seeing as how I'm running Win 7 Ultimate 64bit OS. Also when I tried to install IE 9 32bit I'm told "It's not compatable"My solution was to download an install AU_AMD64_WIN7 from Yahoo. Unlikely as the title seems, it was an IE 9 32 bit install now everything works fine.

View 4 Replies View Related

BSODs With Multiple Errors Can't Log Into Windows

Feb 4, 2012

I downloaded and played the Diablo 3 beta for my first time. When I got in game, i noticed that every time I tried to move my character, the game would freeze up like 10 seconds. Because this was happening I tried to restart the game. Turns out that didn't help so i proceeded to trying to restart my computer to see if that would help, but as the screen was at the part where it shows that you are logging off, I got a BSOD. I have gotten BSODs before, and simply had to restart while on them to get the computer to run normally, but this time when I got the BSOD and tried to usual method of restarting, I kept getting BSODs that automatically restarted the computer again in an infinite loop of BSODs. To stop it from automatically restarting after the BSODs, I hit the option to make it not auto restart after the BSOD so I can get a look at what it actually said. I noticed that when i was getting the BSODs, the error messages weren't always the same. Some said things like "SYSTEM_SERVICE_EXCEPTION" and "BAD_POOL_HEADER."I also noticed that the number and letters at the bottom weren't the same with every BSOD. Since I am unable to access to my computer's desktop, I couldn't pull a proper log of the errors so I had so i just went ahead and read some and wrote them down by hand.

View 8 Replies View Related

BSOD Errors In Windows 7 64bit?

Jul 6, 2012

I've just installed the full retail version of Windows 7 64bit and am having regular BSOD crashes and 'Recovered from a serious error' messages. Hardware is 1 year old (Intel DH67GD) i2500K, 12 GB RAM).

View 9 Replies View Related

Getting Warnings Of Fatal Errors On HDD Which Contains Windows 7 Oem?

Oct 27, 2011

I am getting warnings of fatal errors on my HDD which contains Win 7 oem. Can I legally install the same Win 7 oem on a new replacement HDD which will be installed in the same desktop computer

View 2 Replies View Related

Multiple Errors When Using Windows Update

May 11, 2012

I have searched everywhere but I have been unable to find anyone having the same problems as I. I am running 64bit windows 7.I have been trying to get the computer to updates, though when I reboot it fails to configure the updates, gets to 35% and always fails with error code 80071AB0. After searching Microsoft Support, some people recommended running sfc.exe to scan for corrupted files, then to fix them and reboot. Well, I found no corrupted files on the drive hence there was nothing to fix. Also, I have tried to download the Microsoft Fix-It and run it, though that is to no avail as well. I have attempted to preform a clean boot with my anti-virus disabled to rule out a software problem and that also didn't change anything.When I open Windows Updates and attempt to install them, I get an 80070643 error.I also get these same errors when trying to install the updates from a downloaded file.

View 6 Replies View Related

Windows 7 Is Not Properly Installed Or Have Errors

Dec 11, 2011

some files of my window 7 are not properly installed or have errors. there fore my computer is working so slow. please tell me how can i resolve this problem.

View 7 Replies View Related

Various BSOD With Different Errors During Install Of Windows 7

Mar 2, 2012

I have recently built a computer with the following components:
Asus 990fx Sabertooth motherboard
Zambezi 6-core Am3+ cpu
16 gb g-skill ram
180 Gb SSD
1 TB 7200 rpm HDD
2 MSI GT 560's

Every time I go to install Windows 7 it seem to be getting a different error. It will get to various stages of the install (ex, i can click on the language settings and the install button and then crash, or it will get to expanding files and crash, or it wont even get to the language settings page) The BIOS runs fine and recognizes my RAM and my CPU. How I can install windows 7.

View 8 Replies View Related

Windows 7 Safe Mode Errors

May 29, 2012

I've encountered a problem when staring Windows 7 in Safe Mode (all 3 of them). It's a bit hard to explain so I took some pictures.

- After selecting any of the Safe Mode options I'm greeted with this:
- After pressing Ok, It'll show the usual Log On screen, after pressing on my account I'll receive this:

Then nothing will happen, and it seems to be loading nothing forever. It might be important to note that everything works fine on regular mode and a scan with Microsoft Security Essentials shows nothing suspicious.

View 2 Replies View Related

DOS Commands (DIR And MOVE) Errors With Windows 7

Jul 18, 2012

In Windows 7, I have found erroneous results in executing DOS commands (DIR and MOVE) using the wildcard *. a sample command is:

dir "42013*.LIC > "List 42013 LIC.txt"

This should make a list of all the files in the directory that begin with "42013". But, I get additional files listed that do not begin with "42013" or even contain the sequence of numbers.

View 1 Replies View Related

Windows 7 - SFC ScanNow Errors (Unable To Repair)

Nov 2, 2012

Recently I had an issue with Chrome (which is now solved), But during solving the error I done an SFC Scan as it was a windows .DLL that was reporting to be in error and the scan found a few files that were un-repairable.I also downloaded a Windows 7 Installation Disc from Digital River; Here.After extracting the required files from the .iso files with 7-Zip, I changed the ownership of them and 'Moved and Replaced' the old files with the new files.

These are the files I replaced;

autochk.exe
blbres.dll
netcfgx.dll.mui
icardres.dll

winshfhc.dll

I then re-booted in safe mode with CMD Prompt and re-scanned with SFC, but the same files are reporting they are in error. Are they important? Is there another way to repair them? I am running Windows 7 Home Premium, I have attached the most recent SFC Scan.

View 3 Replies View Related

Internet Connection Errors Since Upgrade To Windows 7

Apr 17, 2012

Over the weekend I upgraded my desktop from Vista home to Premium to Windows Home premium. Since then I cannot maintain my connection to the Internet via the router system in my building, although that had never been a problem before. It also is not a problem when I plug in my laptop.So I start connected and then after a couple of minutes of use become disconnected from the Internet. I go to troubleshooting and it resets the connection, for another two minutes.The two error messages I receive are Local Area Connection does not have a valid IP configuration and the default gateway is not available.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved