I bought Windows 7 Ultimate which comes with the 32bit and 64bit dvd's. Right now I have the Windows 7 RC1 32bit installed but as we all know its gonna start acting up in March since it will start to expire.As the computer boots up with the dvd in the drive, all works fine until it starts asking for the dvd drivers. Yes, my drive is IDE. Not SATA. Do I really have to go buy a SATA cabled dvd drive to install windows 7? Second, is the fact that I have a 32 bit OS now, affecting the fact that it can't find the drivers? Is it because it's looking for 64 bit drivers when I have a 32 bit os now? I've already read up on this issue for the dvd drivers and it seems it was coming up alot even before the RTM versions and it seemed that redownloading an ISO was the solution aside from getting a SATA drive. But, I didn't download my copy. I have a real disc. I've already tried switching in the BIOS where my drive is set to RAID and moving it to IDE and then to the other option on there and no luck so far on getting it installed.
so I'm trying to install windows 7 again. I got a virus for some reason, I couldn't start up my PC anymore. So I formatted everything in the windows 7 installation(you know before the installation begins). There is nothing left of my old files. So after windows expanded the files it's starting to install the features, but then I get some error saying: could not set the offline locale information Error code 0x80FF000. After that I get a lot of errors saying that files are corrupt and that I have to run checkdisk utility. I don't know how ts me how to run that without having windows on your PC.The windows 7 dvd is fine, because I used it before on the very same computer and it worked. Only this time I'm getti
I have recently built a computer with the following components: Asus 990fx Sabertooth motherboard Zambezi 6-core Am3+ cpu 16 gb g-skill ram 180 Gb SSD 1 TB 7200 rpm HDD 2 MSI GT 560's
Every time I go to install Windows 7 it seem to be getting a different error. It will get to various stages of the install (ex, i can click on the language settings and the install button and then crash, or it will get to expanding files and crash, or it wont even get to the language settings page) The BIOS runs fine and recognizes my RAM and my CPU. How I can install windows 7.
I just recently contracted a virus and opted to reformat 2 of my 3 hard drives (the 3rd was used to store documents and backups form the other 2) After reformat/install everything seemed fine until I proceeded to re-install several of my games.
Borderlands installed and proceeded to give me an error that one of the physX .dlls was missing. I managed to find the dll and get it re-installed but then another physXextensions.dll was missing which I was not able to fix, but the game itself works and plays fine.
Then I re-installed Alpha Protocol (worked fine) proceeded to install the 1.1 update and found a missing nxcooking.dll was missing (fixed and then found another)
At this point I found 2 different programs that scanned my registry and dlls and each found approximately 150 errors. Therefore I am planning to reformat all 3 drives and re-install again
I am building a budgetpc. I bought new in box an AMD X3 450 and a asus m4a78lt-mle mobo, and 4gb of DDR3 1333mhz memory Kingston. First off out of the box the processor posts as a amd x4 b50. Not sure if they packaged the wrong one or the mobo is reading wrong. I don't want to pull the cpu fan back off tok read the cpu. I did a clean install of Windows 7 ultimate. After install finished I went to install drivers, well the mobo drivers cd was not in the mobobox so I planned on installing usb wireless nic and downloading drivers. This is where the problem starts.
When I click on the exe install file I get, a cmd box popup that says program to big to fit into memory. So I cant install any drivers, I downloaded alla the mobo drivers from asus on a thumb drive and copied over to the hard drive. Tried to run those files and i get the same error message. So I reinstalled Windows 7 this time the 64bit version and this time i still get the same error but on other exe files I get a message saying that they are not 64 bit files. Even though I downloaded the 64bit version. So I am not sure what is up. All parts were new in box.
Tried pretty much everything apart from a format, which is looking like a good option.The readiness tool produces the following error and no fix ont he net has resolved this issue so far. Renaming Software Distribution folder - NopeMicrosoft Fix it - NopeRe registering windows dll files - NopeNothing works same old thing and this is a the ISO off the website / WSUS update or a exe file. Windows 7 32bit Prof[CODE]
This is a new computer build that I finished a few days ago. I've updated the BIOS, set up a RAID 1 configuration through Intel Rapid Storage Technology/through the BIOS. I installed Windows 7 x64 Ultimate and have begun to migrate my programs and data over from my previous machine. This process has been paused because I am experiencing BSOD. There are two which have occurred:
I ran a Windows Memory Diagnostic test overnight - no problems were found. I've updated all my drivers. I have followed the BSOD posting instructions and SF Diag Tool instructions, and also googled effortlessly regarding these Stop codes.
when i open a command prompt with admin priv and type in sfc/scannow it comes back with the mess windows resource found errors and cant fix them, WTF even on a clean install with no apps installed just the windows update the computer goes thru when doing a clean install. Go to check if i still get errors and what do you know im still getting errors on a clean install.
My dad downloaded lots of bloatware and phishing programs... I want to reformat his computer. He has windows 7 32bit ultimate installed. He has the disc for 32 and 64 bit upgrade cds. Can i switch his to the Windows 7 64 bit? If so, how?
I have a gateway desktop model gm-5483e with a motherboard ecs-945gct-m3 it came with vista home premium 32-bit what hardware do I need to swap out to make the 64-bit version run also I want to use it for some light gaming so how powerful can I go with the CPU right now its an Intel Pentium d925 dual core with each core at 3ghz
After Done Formatting My Computer I Installed The Sound Card And It Worked Perfectly Then I Download Graphic Media Accelarator And Then After Download When I Tried To Install It An Error Pop Out Saying Your System Doesn't Meet the minimum requirement
I'm not too sure on the motherboard So I formatted my WinXP drive, and tried to install Windows 7 Ultimate x86.Everything went fine until after the first reboot, "completing installation" it would just crash and everything froze, making me have to do a 5 sec forced shutdown.Then I tried again about 3 more times...Still same problem.I didn't get a photo, but here is an image I found on google images, similar to my situation, except for my laptop, it has stripes like that but the original image still is in the background.
I keep getting this message: Windows could not format a partition on disk 0. The error occurred while preparing the computer's system volume. Error Code: 0x80070057I have done several steps already, I opened the cmd and I did the following steps[CODE]
The way I have things set up right now is I've got Windows 7 Ultimate 32-bit on my netbook and it's dualboot with Ubuntu 12.04 32-bit (beta); what I want to do (and I'm not sure if this is even possible) is get my existing Windows 7 installation to work in VirtualBox inside Ubuntu.Basically what I want to do, is dualboot Windows 7 but also be able to run that same installation (with all programs and settings) in a virtual machine when in Ubuntu.Anyways, is this even possible? And if so, how do I do this?(currently I'm trying to figure it out myself but I haven't had any luck; although I have yet to try everything)And the point is to be able to still dualboot while at the same time being able to run the same installation in a VM if needed.
I have Windows 7 Ultimate installed on an older PC and cannot get the service pack 1 to successfully install.At one time Microsoft Security Essentials was installed, but it has been uninstalled.I have tried with other virus scanners installed and with no security programs installed.I have searched the Microsoft forums
I currently running Vista Home Premium and am finally moving to Win 7I have the bootable Windows 7 install disc and certainly want to do a clean installNow I'm a bit on the anal side so I really want the install to be clean and am considering doing a wipe on the drive, then booting from teh Win 7 install cd.Is this wipe needed? Or will I get a good, clean install by simply booting to the Win 7 install cd
Could not install windows 7 ultimate.Had first formatted hard disk. Started window on disk and has gone through all the steps except the last. Fail at one of the reboot during installation.
I am useing win 7 ultimate 64 bit and I never made rescue cd I do have,files backed up on carbonite but no hard copy. I installed sp1 but got a fatal area code (C000009A ) and instructed to,insert instalation cd to corect witch is the point I have no idea what I did with it. How do I get another cd, a boot cd, or,restore win 7 ultimate to factory setting.
i am running windows 7 ultimate on my Dell Inspiron desktop. I keep getting error codes whenever i try to install the sp1. I have tried everything that Microsoft has recommended. I have used the update tool and even took all the language packs off my system. I am still having the same problems. All other updates run fine.
I have tried installing & uninstalling xp mode and vm 4 times with new downloads again and again to no avail. i have tried to install xp mode first and get the error 2203...I have installed vm first and then xp mode with the same result. Error 2203 on the web seems to be related to an installer problem yet I have installed many programs with no errors at all.
I have an HP Pavillion m9515y that I bought at a garage sale. This is a pretty meaty desktop (Quad processors, 8 GB of RAM) that was a little over a year old when I bought this past July. It had Vista freshly (re)installed on it when I bought it. Vista ran well enough, although it had its own issues, none of which were like these Hard-lock auto-reboots I keep getting. -original installed OS on the system? Vista, reinstalled from discs from the guy I bought it from
- an OEM or full retail version? 64-bit Ultimate that a friend who works in IT gave me. - What is the age of system (hardware)? - 1.5-2 years old. - What is the age of OS installation? About 1 month now, although I reinstalled it twice with other complications within one week before settling on the installation I have now.
I installed Windows 7 (with SP1 included) the first time in early Sept. and, after having done so, did an update of the drivers, most relevant were the network and display drivers. For some reason, after going into sleep mode the first time, it would not wake up. A hard reboot found that the wireless network card would not reconnect after doing this. Reading through some forums I found that others had a similar issue and had to reinstall, so I did. Also, I had installed overtop the preivious installation (which I thought I told it not to do), so reinstalling from scratch-scratch seemed like a good idea. I blew away partitions, recreated them, formatted and reinstalled, and after reinstalling most of the programs, I finally did the critical windows update, which, ironically, only crtically crippled the machine. Apparently it was related to the display driver (which later I corroborated - see below). Updating the NVidia GEForce SE driver to the latest 5-2011 driver caused it to simply hang at a black screen, never allowing a log on screen. I lived with this for several days--always rebooting into the last known good config--and decided to reinstall. (Mind you, I tried to do a Restore but it wouldn't let me for some reason, saying it may have something to do with an antivirus running, which I turned off and it still wouldn't do it.)So I reinstalled it a 3rd time about a month ago, resolving to do Windows Updates one at a time in order to 1) be able to roll it back just one update if it caused a problem and 2)discern which one/s were causing problems. Sure enough, the display driver recaused the black-screen login hang issue, so I rolled it back and chose not to reinstall it. As it is, I have the original 2009 driver. In a related issue, I believe the screen blacks out for several seconds on occasion due to this. I can live with that, but I can't live with the...
BSOD (Hard-lock auto-reboot), which happens every day or two. I have found it to lock up with some consistency when I'm browsing the internet (on mozilla or chrome) and then again sometimes when I'm listerning to music with media monkey. I just yesterday updated the sound card driver and it hasn't locked up while listening to music (yet). I'm at my wit's end. I do not want to reinstall again because I'm in graduate school for literature and don't have the time nor patience to deal with it (at least not during the quarter), which is why I've enlisted the help of the technical community. I used to work in IT back in the 90s and early 2000s, and got out of it precisely because I wasn't all that good at it. Of course, this knowledge has helped me somewhat in this process, at least knowing how to install, reinstall and update drivers, but I am need of the community.
Asus Sabertooth P67 B3 Intel i7 2600K (2nd Gen) Seagate Barracuda 1TB 32mb cache ATI Radeon HD 6870 Corsair 16gb DDR3 1600mHz Thermaltake TR2 RX 650w LG BDrom/DVDwriter
This is my first build. I have upgraded Mobo bios to 3209. I get the BSOD when I try to load Windows 7 Ultimate 64bit. [0x0000007E] I know I have probably missed something.
I just got the windows ultimate 7 64 bit disc from Microsoft the other day. I have been trying to install it on my computer and everything goes well until the second reboot. At this point the computer freezes at the windows 7 splash screen. The 32 bit version installs perfectly without any problems.
I'm trying to install Windows 7 Ultimate, 64-bit on my desktop. I reformatted the harddisk and booted to the DVD. I've already checked the compatibility and was previously running Windows 7 Ultimate, 32-bit. In the computer properties, it did say that the processor (AMD Athlon 64x2) is capable of running 64-bit. When I boot to the DVD, it goes through the process and seems like it is working, but after a few automatic reboots, it just black-screens. At that point, if I reboot, it just black-screens again it.I am able to put 32-bit back on it, and it installs without problems, but am trying to get it setup to run SharePoint dev tools. Is there something additional I need to do to install 64-bit that was running 32-bit?
I have an unusual problem which I could not find any answer so far.My version of Windows 7 is the Ultimate 64-bit, and lately I cannot install many 64-bit programs as it appears a message of incompatible version of Windows. Very strange.
I bought a new Desktop PC and it has the win 7 30 day trial.I need to install my Win 7 ultimate 64bit to my PC, deleting the 30 day trial. ( I need to know how to start the setup when the PC is booting up, most importantly)
On both PCs after a successful clean Windows 7 x64 Ultimate, starts windows for the first time etc etc ask me to select windows update setting, goes into windows desktop then does a auto restart (proper logging off restart etc). At this point, after bios screen when it attempts to boot from hdd the PC just resets inself and goes back to POST, over and over again. I've tried using only one stick of ram, tried using VGA to do a clean install again instead of DVI, tried changing my RAM to a lower clock speed, every other bios setting is default. I also tried updating to the latest bios and again did a clean install (delete and create partition) even tried installing x86 instead of x64.