Multiple Registry And Missing Dll Errors On New Re-install Windows 7
Aug 20, 2012
I just recently contracted a virus and opted to reformat 2 of my 3 hard drives (the 3rd was used to store documents and backups form the other 2) After reformat/install everything seemed fine until I proceeded to re-install several of my games.
Borderlands installed and proceeded to give me an error that one of the physX .dlls was missing. I managed to find the dll and get it re-installed but then another physXextensions.dll was missing which I was not able to fix, but the game itself works and plays fine.
Then I re-installed Alpha Protocol (worked fine) proceeded to install the 1.1 update and found a missing nxcooking.dll was missing (fixed and then found another)
At this point I found 2 different programs that scanned my registry and dlls and each found approximately 150 errors. Therefore I am planning to reformat all 3 drives and re-install again
I am building a budgetpc. I bought new in box an AMD X3 450 and a asus m4a78lt-mle mobo, and 4gb of DDR3 1333mhz memory Kingston. First off out of the box the processor posts as a amd x4 b50. Not sure if they packaged the wrong one or the mobo is reading wrong. I don't want to pull the cpu fan back off tok read the cpu. I did a clean install of Windows 7 ultimate. After install finished I went to install drivers, well the mobo drivers cd was not in the mobobox so I planned on installing usb wireless nic and downloading drivers. This is where the problem starts.
When I click on the exe install file I get, a cmd box popup that says program to big to fit into memory. So I cant install any drivers, I downloaded alla the mobo drivers from asus on a thumb drive and copied over to the hard drive. Tried to run those files and i get the same error message. So I reinstalled Windows 7 this time the 64bit version and this time i still get the same error but on other exe files I get a message saying that they are not 64 bit files. Even though I downloaded the 64bit version. So I am not sure what is up. All parts were new in box.
I don't know the best place to post this so please advise me if its in the wrong place. I ran an analysis on my laptop for defrag using auslogics as I haven't done one in a year and it also told me that I had junk files and registry errors etc that I needed to get rid of before defragging. I've run Ccleaner, Glary utilities and advanced systemcare free and it still tells me there are files/errors to get rid of. I don't really want to buy a program atm just to get rid of these if theres a perfectly good free program I can use - does anyone know of anything else other than the ones mentioned that will clear this up? Is it essential that I do
I downloaded and played the Diablo 3 beta for my first time. When I got in game, i noticed that every time I tried to move my character, the game would freeze up like 10 seconds. Because this was happening I tried to restart the game. Turns out that didn't help so i proceeded to trying to restart my computer to see if that would help, but as the screen was at the part where it shows that you are logging off, I got a BSOD. I have gotten BSODs before, and simply had to restart while on them to get the computer to run normally, but this time when I got the BSOD and tried to usual method of restarting, I kept getting BSODs that automatically restarted the computer again in an infinite loop of BSODs. To stop it from automatically restarting after the BSODs, I hit the option to make it not auto restart after the BSOD so I can get a look at what it actually said. I noticed that when i was getting the BSODs, the error messages weren't always the same. Some said things like "SYSTEM_SERVICE_EXCEPTION" and "BAD_POOL_HEADER."I also noticed that the number and letters at the bottom weren't the same with every BSOD. Since I am unable to access to my computer's desktop, I couldn't pull a proper log of the errors so I had so i just went ahead and read some and wrote them down by hand.
I have searched everywhere but I have been unable to find anyone having the same problems as I. I am running 64bit windows 7.I have been trying to get the computer to updates, though when I reboot it fails to configure the updates, gets to 35% and always fails with error code 80071AB0. After searching Microsoft Support, some people recommended running sfc.exe to scan for corrupted files, then to fix them and reboot. Well, I found no corrupted files on the drive hence there was nothing to fix. Also, I have tried to download the Microsoft Fix-It and run it, though that is to no avail as well. I have attempted to preform a clean boot with my anti-virus disabled to rule out a software problem and that also didn't change anything.When I open Windows Updates and attempt to install them, I get an 80070643 error.I also get these same errors when trying to install the updates from a downloaded file.
I wanted to install something in my laptop, but, DVD drive is NOT THEREin My Computer. So, I think that I should relaunch explorer.exe. then, bad things start to happen, all icons is gone and the icons change to "Folder" icon. If I want to open something in taskbar, it will be endless loading.
And in my task manager, it is flooded with explorer.exe (800-900 processes)
I'm using Windows 7 Ultimate 64 build 6.1 I cant update because if I launch Windows update, it will freeze.
I have been trying to resolve some BSOD I got on my PC. To do this I also re-installed windows several times. I build and install everything by myself for years, but this is the first PC with a lot of BSODs. I used the Debugging Tool for windows to check the minidumps by myself, but as far as my knowledge goes, I didn't find anything special in there. The only thing that was obvious was that in all BSODs the ntoskrnl.exe was involved. This was something BlueScreenView revealed also. In my opinion however it seems there is more to it, since the ntoskrnl.exe could probably also crash because of another driver or hardware problem.On my previous fresh Windows 7 Install I did found out once that alot of BSOD I had at that time were caused by a bad Creative driver for my X-Fi. On the web I found a useful hint, because other X-Fi users pointed to the beta-drivers for the card. The official Creative drivers are almost two years older then these beta drivers, so obviously the beta drivers should be the first choice. These drivers are the ones I use now. I also had some problem with my OCZ Vertex 3 MI, like most owners of this hardware, and the problem was the unstable firmware. I am using the latest firmware now, which is 2.15, and that made the system alot more stable. The third problem is happening in POST: my logitech G110 keyboard features an USB hub and connection for media. These kind of USB keyboards had some problem with recognision and initialisation in the UEFI BIOS. For that I also updated to the latest BIOS for my motherboard.
All in all you can see I discovered and tried to fix a lot of different causes for BSODs. I also ran memtest once on the system for two hours, but this was in Dual Channel setup. Didn't gave any errors anyway.The latest minidump is created by the use of Verifier. I turned verifier on to test the two drivers for my AMD HD6970(crossfired). After 5 minutes in windows the BSOD appeared. I am using AMD Catalyst 12.1 drivers. I tried this, because the BSODs all are different then the ones I had on previous Windows 7 installations (on the same pc), but the only thing I changed in the current installation, was the AMD 12.1 drivers.I reinstalled windows about two weeks ago, after using Secure Erase on my SSD. I installed only the latest drivers for all the things that need drivers. The complete installation, including windows updates and drivers, was without any fault. One day later the first BSOD appeared, etc. I use the system to play Battlefield 3 only, since the fresh install. Strangely, I played more then 50 hours in the game, without any crash or BSOD! The new AMD FX-8150 processor is the first to support native 1866 MHz DDR3. The motherboard specification showed that the board supported 1866 (OC), thus it's seen as an overclock. I set all settings in bios like the ram specificiation told, which is: 9-11-9-27 2T @1.65V. Still, it could be that the 1866 MHz is too much on standard NB voltages? It's something I couldn't find an answer to on the internet, and since I never overclock I don't have that much experience with the voltages.
All BSODs happened in different situations, like just after windows log in, or when I start a program, or when idling, or when browsing the internet.Since I couldn't figure out any more usefull details out of the minidumps, I hope someone here with more experience could check the attached files.
Computer is a few years old, a home build, running Windows 7 Home Premium x64. Haven't really had too many problems other than the occasional BSOD or random restart, but it's gotten a lot worse lately so I wanna get to the bottom of it.The two errors I've gotten are Memory Management and System Service Exception, both seem to be linked to the ntoskrnl.exe file. I also ran the System File Checker and got the following error reported: "Cannot repair member file [l:24{12}]"kerberos.dll" of Microsoft-Windows-Security-Kerberos". Lastly I ran the windows memory diagnostic and it detected several hardware errors.
1)A system restore to a couple weeks ago 2)Repair the system/OS with my Windows 7 disc 3)Replace the RAM
Wanted to post here before I try any of those though. Whew ok sorry to be long winded but wanted to provide as much info as possible.
I am using windows 7 , toshiba A505 notebook, my mouse stopped working (even usb mouse) and I got this error 19 message (Registry is missing or damaged). I installed the driver again from toshiba website, but also I got the same error message.
[code] I couldn't do a health report due to being stuck with safe mode with networking. The BSOD started about two months ago while the gf was using it and didn't happen for me till yesterday. As of now I can get it to start normally but It crashes any time I open anything. I tried swapping ram and no change. I honestly don't know a whole lot about windows 7.
I've been getting BSODs randomly while playing Arma 2 with the Dayz mod. At first I thought it must be something with the game but I've also gotten BSODs playing Red Orchestra 2: Heroes of Stalingrad but I've also played other games like Portal 2 without problems. Thinking it might be driver related I did a fresh install of windows but to no avail.Half the time the game will crash randomly anywhere from 10 minutes of play to 4 hours giving a 0x000005 exception code. The other half of the time my computer will hang and BSOD giving me a different bccode almost every time. The most recent is 10007e and the only other one I remember is d1 which is one of the few that I've gotten multiple times.The Windows Desktop Manager has also crashed twice but I'm not sure it that is related.It was custom built a year ago and was problem free until about a month ago when the BSODs start. They stopped for a while but started again about a week or two ago.
This is my gf's custom pc she built herself about 6 years ago. I has been used and abused by her siblings. It was having all kinds of problems so she had a friend look at it and clean everything inside. It was still crashing so I reformatted and reloaded the OS, trying to just get a clean start. Although, the issue of crashing has been improved through this, it is not cured.
I get BSOD while playing games, surfing the web, while sitting idle, after coming back from sleep, pretty much anytime. Sometimes I get no BSOD for hours, other times its more constant.
sometimes it says DRIVER_IRQL_NOT_LESS_OR_EQUAL usually usbport.sys / nvlddmkm.sys and usually 0x000000D1
So a few months ago I started getting BSOD while rendering with Adobe Premiere. The odd part was that I would only get them when actually using export from with Premiere. If I queued them in Adobe Media Encoder it would generally be fine. Eventually things persisted to BSOD randomly occurring, sometimes 5 a day sometimes weeks a part. Eventually I bought a new SSD and reinstalled Windows. Things returned to normal, with BSOD only occurring while using export, but today things seemed to have returned to there old ways.
I may also add that since I've built this computer things have acted weird. Chrome plugins randomly crash. Shockwave player crashes constantly. I can't install DirectX.
I work at the IT department of a school where we have around 600 PC's that need to be maintained. Most things break by the kids and most is fixed my replacing, or simply imaging said computers again.However, after having switched over from Windows XP to Windows 7 we've been having masses of BSODs when loading Windows. Not just the normal PC's, not just linked to one type (although pretty much everything is from HP). But it keeps happening.The most common errors that we've been able to discover are:0x00000018, 0x0000000A, 0x0000007E, 0x000000BE.After having researched these things, they all turned out to have something to do with drivers, not only that, but when trying to boot into safe mode the PC's would all freeze at "classpnp.sys" and sometimes reboot shortly after.Our current solution is simply putting a new Windows 7 image over the computer and it'll work another day or two. It's great that it works again then, but we spend too much time on it.
It can't possibly be the hardware, there are too many different kinds of computers for it to be that. I'm quite sure the problem is somewhere originating from the drivers we install, but then he question comes as to what ruins the drivers? Not to mention that there are also different drivers for the different kinds of PC's.
recently, i have had many bsod consecutively. recently, i have had about 9 bsod over about 5 days (although the report lists a break between my bsod between 2/21 and 3/27 because i was on break for most of this). in the past i have gotten bsod while playing games, but the recent ones have been while doing mundane tasks such as browsing the internet or watching Internet videos?i have used bluescreenview to try to discover the cause of my problem, but every bsod seems to have a different error and file associated with it. many of them are blamed on ntoskrnl.exe, but have different error messages. some are from different files.i am running windows 7 64 bit on a desktop i built about 15 months ago. since then, i have gotten many error messages, but more recently. i have 8 gb of ram, geforce gtx 470, amb phenom ii black multicore processor, and gigabyte 890gpa-ud3h motherboard. i assembled the desktop components and installed all software new onto the computer.
things i have tried recently: resetting the ram in different slots, running antivirus (i have avg free, malwarebytes, and spybot), cleaning the computer fans, uninstalling/driversweeping the video card drivers and reinstalling, disabling the motherboard sound card through bios so the external sound card i have installed does not interfere, running cmd /chkdsk with fix to try to correct any errors found. i have been dealing with bsod a lot frequently, although it has usually only been about 1 per week in the past. these are extremely frequent recently with multiple per day and it is interfering with my work. attached are the files requested.
I was told second hand by her that it was after a windows update install). I attempted startup repair multiple times with no real outcome until i swapped over my main os hdd and was then able to run startup repair on her hdd. From that point on I was able to run win 7 from either drive rather succesfully until the next day. I receieved a text message from the wife while I was at work stating windows updated again and startup was not possible ( thus again i have no idea what update it was). since that point I have been unable to even run startup repair.
installing Windows 7 on a virtual machine.I have 178MB RAM (which I know isn't enough), but it does the Starting Windows screen before the installation, but then it comes up with this error: File: windowssystem32configsystem Status: 0xc0000001 Info: Windows failed to load because the system registry file is missing, or corrupt.
I'm trying to use the program "Dragon Tag", where the program will start MS-Excel, and here put an add-in into the menu. However, I get the below error, where I seemingly do not have the needed privileges. Tried to remedy this without succes, but then I tried to run the program being logged in as the administrator, but got the same error. If the administrator cannot do this, how should any other user then?
Dragon Tag cannot verify the required Word/Excel configuration or adjust it (if required)because your user account does not have the privileges to read or update the registry key HKEY_CURRENT_USERSoftware\Microsoft\Office\Excel\Addins\DTStartupShim.Connect.
Adjust your system's security to allow this access for configuration verification and adjustment and then restart Dragon Tag.
I clean installed Windows 7 on my HP Pavilion DV6-6C35DX laptop using these 2 guides: SSD / HDD : Optimize for Windows Reinstallation Clean Install Windows 7
I noticed when I was installing Windows 7, I never had a screen pop up (step 17) asking about my network location type. After Windows was installed, my laptop couldn't find any networks regardless if I tried plugging an ethernet cord from my modem into my laptop. When I click troubleshoot it says, "Install a driver for your network adapter". I click next it says, "Windows could not find a driver for your network adapter". I look in my Device Manager, I see under Other Devices it lists: Ethernet Controller, Network Controller, PCI Device, SM Bus Controller, Universal Serial Bus (USB) Controller, Universal Serial Bus (USB) Controller, Unknown Device, and Unknown Device all with yellow exclamation marks next to them.
My Googlefu skills told me that when clean installing windows it only installs generic drivers, and I need to install the drivers on my motherboard disk. The problem is my laptop didn't come with any such disk. I tried going on HP's website on another computer, and burning all the network drivers onto a blank DVD ( can't use a USB since those drivers are not working). When I installed them nothing really happened.
ack when I first set up my system I used a tutorial on this forum that showed how to install the OS on one drive and everything else on the other. The setup required changing the registry settings in audit mode during the initial OS install. I am looking for this tutorial but now can't find it. I even posted in this post, but even those are missing so I can't just trace my posts. I'm confused as to why it is missing and am hoping anybody could lead me back to it.
I have my soon 1 year old rig wich has from the start been a bit of a bumby ride.
Lately things have gotten worse and I think it's time to do something about it!
So my comp has BSOD out quite random since i built it, and yesterday i couldn't boot up to windows. That due to a random BSOD and then i couldn't choose to boot form my C disk in Bios. So the message BOOTMgr is missing appeared.Ii solved the BOOTMGR very easy (*phew*) but as soon as i booted up my comp today it freeze-hang. This Shouldn't be appearing on a rig like this right?
My specs are following:
i7 920 (C stepping) Asus P6T Asus 9800GTX+ DK TOP 620W PSU WD 640gb Corsair 3 gb 1333mhz
Simply explained I'm hunting for the cause of all my BSOD's and weird behaviors.
I've looked up some of my BSOD's and all of them did point at some kind of memory failure, one of them was error in the NTFS system.
I've began to wonder, is my hard drive not working as it should?
This is my first self build comp and I'm quite new into all of this, would be very happy see some answers.
I recently upgraded a windows machine which was running XP to Windows 7. When I tried to install the software for an HP scanner, I received the error message: Missing registry keys. slbcsp.dll, sccbase.dll, gpkcsp.dll & Enum.
While windows was uploading some updates yesterday, I cleaned my registry using Iolo's system mechanic tool and that's where the problems started. (I already read and understood your message: don't use those tools and stay out of your registry. A lesson I learned too late, unfortunately.)My computer rebooted and after a couple of minutes I noticed the message: " failure configuring windows features reverting changes ". I managed to bypass this loop by running in safe mode and recover my computer to a restore point in the past. This only worked partially: I get windows to run in normal mode but I get this message: "system failed while restoring the registry from the restore point. Restore point damaged or was deleted during restore". So it didn't restore but I can get into my windows now.So I don't get the 'reverting change loop' anymore, so I can access my computer but what's the mess? Well my computer is slow as hell.Like mentioned above, I already looked around on this forum and wrote down what I already tried. [code] My computer is terrible slow because of a registry defrag/optimization of a registry tool (in combination with windows update) --> I need to find a way to get back my old registry files but system recovery ain't working.
All of a sudden my computer after 1 hour freezes and crashes completely.I get a black screen of death with error code 0xc000000e Recovery Screen After i hit enter i got another message saying Your PC needs to be repaired. The application or operating system couldnt be loaded because a required file is missing or contains errors. File: Windowssystem32winload.exe Error code: 0cx000000e After the error happens and I restart, the main hard drive will not show up and I have to restart again for it to show up.SO i just went ahead and formatted the PC and reinstalled windows 7 from scratch.After an hour or less the same thing happened again and also when I reboot the computer asks me to choose which windows 7 I want to log into. Why is this showing up if I formatted the disc completely (Deleted and created New disc while i was reinstalling windows 7)My main drive is a Crucial m4 SDD 2.5 128GB Sata I have 4 other drives with over 2tb each but i use this for files. Windows is installed on just the crucial HD?
so I'm trying to install windows 7 again. I got a virus for some reason, I couldn't start up my PC anymore. So I formatted everything in the windows 7 installation(you know before the installation begins). There is nothing left of my old files. So after windows expanded the files it's starting to install the features, but then I get some error saying: could not set the offline locale information Error code 0x80FF000. After that I get a lot of errors saying that files are corrupt and that I have to run checkdisk utility. I don't know how ts me how to run that without having windows on your PC.The windows 7 dvd is fine, because I used it before on the very same computer and it worked. Only this time I'm getti
I bought Windows 7 Ultimate which comes with the 32bit and 64bit dvd's. Right now I have the Windows 7 RC1 32bit installed but as we all know its gonna start acting up in March since it will start to expire.As the computer boots up with the dvd in the drive, all works fine until it starts asking for the dvd drivers. Yes, my drive is IDE. Not SATA. Do I really have to go buy a SATA cabled dvd drive to install windows 7? Second, is the fact that I have a 32 bit OS now, affecting the fact that it can't find the drivers? Is it because it's looking for 64 bit drivers when I have a 32 bit os now? I've already read up on this issue for the dvd drivers and it seems it was coming up alot even before the RTM versions and it seemed that redownloading an ISO was the solution aside from getting a SATA drive. But, I didn't download my copy. I have a real disc. I've already tried switching in the BIOS where my drive is set to RAID and moving it to IDE and then to the other option on there and no luck so far on getting it installed.
I have recently built a computer with the following components: Asus 990fx Sabertooth motherboard Zambezi 6-core Am3+ cpu 16 gb g-skill ram 180 Gb SSD 1 TB 7200 rpm HDD 2 MSI GT 560's
Every time I go to install Windows 7 it seem to be getting a different error. It will get to various stages of the install (ex, i can click on the language settings and the install button and then crash, or it will get to expanding files and crash, or it wont even get to the language settings page) The BIOS runs fine and recognizes my RAM and my CPU. How I can install windows 7.
I recently upgraded my laptop to windows 7 ultimate (32 bit), and after doing so my laptop wouldn't connect to or find any networks. After troubleshooting and attempting to re-install the Network controller, the Video controller and the Ethernet controller , I keep getting a message saying that the driver wasn't successfully installed. I cannot find these drivers anywhere , and since I can't connect to the Internet , I can't download them to the laptop.