Installer Hanging Errors And Multiple Startup Repairs
May 23, 2011
I was told second hand by her that it was after a windows update install). I attempted startup repair multiple times with no real outcome until i swapped over my main os hdd and was then able to run startup repair on her hdd. From that point on I was able to run win 7 from either drive rather succesfully until the next day. I receieved a text message from the wife while I was at work stating windows updated again and startup was not possible ( thus again i have no idea what update it was). since that point I have been unable to even run startup repair.
View 3 Replies
ADVERTISEMENT
Oct 1, 2012
The other day i started it up but it was stuck on starting windows so i tried restarting it and it put me in startup repair so i left it on for about 8 hours and it was stuck on the sam screen not changing at all so i turned it of and i just turned it back on about 2 hours ago and its doing the same thing. my HD has 1TB and it is a toshiba im not sure what model or whatever but can someone plz help do i wait for it 2 finish or do i get a new HD. and im sorry 4 any spelling mistakes.
View 1 Replies
View Related
Aug 15, 2011
i have windows 7 64 bit. it would get to the "Starting Windows" screen with the little pulsing logo and then freeze there forever. after forcing a shutdown once or twice it began attempting repairs. it would run checkdisk and find corrupted file and delete them. this happened several times at boot up. often it would freeze after this and not let me enter repair screen. so i loaded up the win 7 disk and tried to repair it from the disk. lo and behold it is not finding an installed copy of win 7. does this mean my os is gone? corrupted? could my hard drive have failed? i dont think its the memory but i have not been able to see the memcheck results since i cant boot up. is there anything i can do or must i reinstall windows. i dont want to loose all my files but do i have any other option?
View 4 Replies
View Related
May 22, 2009
new to windows 7, wanted to get into it a while back but didnt make the first betas. Got my download of the RC the other day, and am proceeding to (or trying to at least) install now.
Is it normal for the setup to sit on the back-splash window for at least 5 minutes before popping up the language selection? I thought at first something went wrong, but eventually it moved on, but now is sitting on "setup is starting" and has been there for about 5 minutes as well.
I am installing on to a freshly wiped hard drive, and it is the only one in the system.
View 2 Replies
View Related
Jan 28, 2013
I bought Acer aspire one D270. My computer worked fine for 1,5 week. But I got blue screen at last night.I tried startup repairs and system restore. [code]
View 1 Replies
View Related
Sep 1, 2012
My laptop has been experiencing the disk read error on startup. I called Sony (I have a Sony VAIO Laptop VPCF130FD) and they put me through all these steps including trying to boot up the recovery partition of the drive. Through the steps taken, they think that the OS is corrupt as the computer had been freezing before.The only step that has taken effect is the reset default values of the BIOS. When the recovery partition is selected it hangs between the "Starting Windows" screen and the first recovery screen.Sony wanted me to pay $60 for discs to be sent to my house, but I am building a gaming desktop PC so I thought I would just buy the OEM System Builder Win 7 Home Prem x64 and use that disc to install as I have the product key my laptop uses.So I bought the disc today and booted my laptop off of it but like the recovery partition, it sits between the Start Windows screen and the first install screen.
View 9 Replies
View Related
Jul 7, 2012
This is my first custom built computer. I've had the same similar problem for the past year. I have continuous problems starting up and BSOD. My computer will not start up properly at times. It also seems like this problem happens if my computer is off, not in sleep mode, for longer than 24 hours. It involves several restarts. I've checked my hard drive and memory for bad sectors and not found anything. I've run both the memtest and the windows memory test several times and found no problems.There was one post I found on a seperate site that talked about ASRock m/b having problem with Ram voltage so I've manually changed the BIOS to be the voltage required for the Ram. Seemed like it fixed it temporarily but quickly started getting more BSOD.Recently updated AMD drivers and was completely unable to get into Windows. When I restored the system to before the AMD updates I was able to get into Windows.
Some of the BSOD:Bad_Pool_Header Bug_Code Memory_Management
Below are my system specs:Processor: AMD Phenom II X4 840 3.2GHz Socket AM3 95W Quad-Core Motherboard: ASRock 890GX PRO3 AM3+ AMD 890GX RAM: 4 GB - Patriot G Series �Sector 5� Edition 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 Hard Drive: 2 TB - HITACHI Deskstar 7K2000 Graphics Card: Visiontek 900299 Radeon HD 4670 Graphic Card - 750 MHz Core - 1 GB DDR3 SDRAM - PCI Express 2.0 x16 - 1600 MHz Memory Clock - 2560 x 1600 - CrossFireX DVD Drive: ASUS 24X DVD Burner Windows 7 . . . - x86 (x64) - Professional - Full retail version - Age of system (hardware)? 1 Year - What is the age of OS installation - 1 Year (reinstalled once)
View 9 Replies
View Related
Mar 19, 2012
I use WhoCrashed to analyze these errors but I dont know how to solve. Maybe my hardware cause these.
Processor: Intel Core 2 Quad CPU @ 2.40 Ghz
Ram: 2GB Corsair
OS: Windows 7 Ultimate 32-bit
VGA: ASUS 8600 GTS
Mainboard: ASUS Striker Extreme
View 3 Replies
View Related
Feb 2, 2013
I have a desktop, custom built, that has been a nightmare since day one. Anyway, last time I brought it in for repairs they checked the motherboard and RAM- it was all fine, and they replaced my hard drive.For the past month or so, my computer will freeze or hang while I'm in the middle of working on something. I'm a photographer and it usually happens when photoshop is left sitting open for a few minutes. Firefox will freeze and so will PS and Bridge.When it freezes, nothing works. Ctrl+alt+delete will work to open the task manager, but it won't actually end any tasks when I try. I am forced to hold the power button down to shut it off. About 3 days ago I got a message upon start up saying that I needed to check disk but immediately said that it couldn't check disk due to a corruption? Stating that a recently installed software was the problem and I needed to do a system restore. I tried to do a system restore to before I installed my machforms update and it wouldn't let me! Stated that the c drive is corrupt and I need to do a check disk. So it's sending me in a circle and I can't complete either. Today, when I booted I received a lovely grey screen. This happened about 7 times before it booted normally. I tried to boot in safe mode but it froze.
View 1 Replies
View Related
Sep 1, 2012
Toshiba Satellite 655, 64 bit OS, Intel. Celeron CPU 925@2.30 GHz
View 6 Replies
View Related
Feb 6, 2013
I wanted to install something in my laptop, but, DVD drive is NOT THEREin My Computer. So, I think that I should relaunch explorer.exe. then, bad things start to happen, all icons is gone and the icons change to "Folder" icon. If I want to open something in taskbar, it will be endless loading.
And in my task manager, it is flooded with explorer.exe (800-900 processes)
I'm using Windows 7 Ultimate 64 build 6.1 I cant update because if I launch Windows update, it will freeze.
View 1 Replies
View Related
Feb 4, 2012
I downloaded and played the Diablo 3 beta for my first time. When I got in game, i noticed that every time I tried to move my character, the game would freeze up like 10 seconds. Because this was happening I tried to restart the game. Turns out that didn't help so i proceeded to trying to restart my computer to see if that would help, but as the screen was at the part where it shows that you are logging off, I got a BSOD. I have gotten BSODs before, and simply had to restart while on them to get the computer to run normally, but this time when I got the BSOD and tried to usual method of restarting, I kept getting BSODs that automatically restarted the computer again in an infinite loop of BSODs. To stop it from automatically restarting after the BSODs, I hit the option to make it not auto restart after the BSOD so I can get a look at what it actually said. I noticed that when i was getting the BSODs, the error messages weren't always the same. Some said things like "SYSTEM_SERVICE_EXCEPTION" and "BAD_POOL_HEADER."I also noticed that the number and letters at the bottom weren't the same with every BSOD. Since I am unable to access to my computer's desktop, I couldn't pull a proper log of the errors so I had so i just went ahead and read some and wrote them down by hand.
View 8 Replies
View Related
Feb 4, 2012
I have been trying to resolve some BSOD I got on my PC. To do this I also re-installed windows several times. I build and install everything by myself for years, but this is the first PC with a lot of BSODs. I used the Debugging Tool for windows to check the minidumps by myself, but as far as my knowledge goes, I didn't find anything special in there. The only thing that was obvious was that in all BSODs the ntoskrnl.exe was involved. This was something BlueScreenView revealed also. In my opinion however it seems there is more to it, since the ntoskrnl.exe could probably also crash because of another driver or hardware problem.On my previous fresh Windows 7 Install I did found out once that alot of BSOD I had at that time were caused by a bad Creative driver for my X-Fi. On the web I found a useful hint, because other X-Fi users pointed to the beta-drivers for the card. The official Creative drivers are almost two years older then these beta drivers, so obviously the beta drivers should be the first choice. These drivers are the ones I use now. I also had some problem with my OCZ Vertex 3 MI, like most owners of this hardware, and the problem was the unstable firmware. I am using the latest firmware now, which is 2.15, and that made the system alot more stable. The third problem is happening in POST: my logitech G110 keyboard features an USB hub and connection for media. These kind of USB keyboards had some problem with recognision and initialisation in the UEFI BIOS. For that I also updated to the latest BIOS for my motherboard.
All in all you can see I discovered and tried to fix a lot of different causes for BSODs. I also ran memtest once on the system for two hours, but this was in Dual Channel setup. Didn't gave any errors anyway.The latest minidump is created by the use of Verifier. I turned verifier on to test the two drivers for my AMD HD6970(crossfired). After 5 minutes in windows the BSOD appeared. I am using AMD Catalyst 12.1 drivers. I tried this, because the BSODs all are different then the ones I had on previous Windows 7 installations (on the same pc), but the only thing I changed in the current installation, was the AMD 12.1 drivers.I reinstalled windows about two weeks ago, after using Secure Erase on my SSD. I installed only the latest drivers for all the things that need drivers. The complete installation, including windows updates and drivers, was without any fault. One day later the first BSOD appeared, etc. I use the system to play Battlefield 3 only, since the fresh install. Strangely, I played more then 50 hours in the game, without any crash or BSOD! The new AMD FX-8150 processor is the first to support native 1866 MHz DDR3. The motherboard specification showed that the board supported 1866 (OC), thus it's seen as an overclock. I set all settings in bios like the ram specificiation told, which is: 9-11-9-27 2T @1.65V. Still, it could be that the 1866 MHz is too much on standard NB voltages? It's something I couldn't find an answer to on the internet, and since I never overclock I don't have that much experience with the voltages.
All BSODs happened in different situations, like just after windows log in, or when I start a program, or when idling, or when browsing the internet.Since I couldn't figure out any more usefull details out of the minidumps, I hope someone here with more experience could check the attached files.
View 3 Replies
View Related
Mar 7, 2012
Computer is a few years old, a home build, running Windows 7 Home Premium x64. Haven't really had too many problems other than the occasional BSOD or random restart, but it's gotten a lot worse lately so I wanna get to the bottom of it.The two errors I've gotten are Memory Management and System Service Exception, both seem to be linked to the ntoskrnl.exe file. I also ran the System File Checker and got the following error reported: "Cannot repair member file [l:24{12}]"kerberos.dll" of Microsoft-Windows-Security-Kerberos". Lastly I ran the windows memory diagnostic and it detected several hardware errors.
1)A system restore to a couple weeks ago
2)Repair the system/OS with my Windows 7 disc
3)Replace the RAM
Wanted to post here before I try any of those though. Whew ok sorry to be long winded but wanted to provide as much info as possible.
View 5 Replies
View Related
May 11, 2012
I have searched everywhere but I have been unable to find anyone having the same problems as I. I am running 64bit windows 7.I have been trying to get the computer to updates, though when I reboot it fails to configure the updates, gets to 35% and always fails with error code 80071AB0. After searching Microsoft Support, some people recommended running sfc.exe to scan for corrupted files, then to fix them and reboot. Well, I found no corrupted files on the drive hence there was nothing to fix. Also, I have tried to download the Microsoft Fix-It and run it, though that is to no avail as well. I have attempted to preform a clean boot with my anti-virus disabled to rule out a software problem and that also didn't change anything.When I open Windows Updates and attempt to install them, I get an 80070643 error.I also get these same errors when trying to install the updates from a downloaded file.
View 6 Replies
View Related
Jan 18, 2012
[code] I couldn't do a health report due to being stuck with safe mode with networking. The BSOD started about two months ago while the gf was using it and didn't happen for me till yesterday. As of now I can get it to start normally but It crashes any time I open anything. I tried swapping ram and no change. I honestly don't know a whole lot about windows 7.
View 9 Replies
View Related
May 23, 2012
I've been getting BSODs randomly while playing Arma 2 with the Dayz mod. At first I thought it must be something with the game but I've also gotten BSODs playing Red Orchestra 2: Heroes of Stalingrad but I've also played other games like Portal 2 without problems. Thinking it might be driver related I did a fresh install of windows but to no avail.Half the time the game will crash randomly anywhere from 10 minutes of play to 4 hours giving a 0x000005 exception code. The other half of the time my computer will hang and BSOD giving me a different bccode almost every time. The most recent is 10007e and the only other one I remember is d1 which is one of the few that I've gotten multiple times.The Windows Desktop Manager has also crashed twice but I'm not sure it that is related.It was custom built a year ago and was problem free until about a month ago when the BSODs start. They stopped for a while but started again about a week or two ago.
View 9 Replies
View Related
Aug 12, 2012
This is my gf's custom pc she built herself about 6 years ago. I has been used and abused by her siblings. It was having all kinds of problems so she had a friend look at it and clean everything inside. It was still crashing so I reformatted and reloaded the OS, trying to just get a clean start. Although, the issue of crashing has been improved through this, it is not cured.
I get BSOD while playing games, surfing the web, while sitting idle, after coming back from sleep, pretty much anytime. Sometimes I get no BSOD for hours, other times its more constant.
sometimes it says DRIVER_IRQL_NOT_LESS_OR_EQUAL
usually usbport.sys / nvlddmkm.sys
and usually 0x000000D1
View 9 Replies
View Related
Aug 12, 2012
So a few months ago I started getting BSOD while rendering with Adobe Premiere. The odd part was that I would only get them when actually using export from with Premiere. If I queued them in Adobe Media Encoder it would generally be fine. Eventually things persisted to BSOD randomly occurring, sometimes 5 a day sometimes weeks a part. Eventually I bought a new SSD and reinstalled Windows. Things returned to normal, with BSOD only occurring while using export, but today things seemed to have returned to there old ways.
I may also add that since I've built this computer things have acted weird. Chrome plugins randomly crash. Shockwave player crashes constantly. I can't install DirectX.
View 2 Replies
View Related
Aug 20, 2012
I just recently contracted a virus and opted to reformat 2 of my 3 hard drives (the 3rd was used to store documents and backups form the other 2) After reformat/install everything seemed fine until I proceeded to re-install several of my games.
Borderlands installed and proceeded to give me an error that one of the physX .dlls was missing. I managed to find the dll and get it re-installed but then another physXextensions.dll was missing which I was not able to fix, but the game itself works and plays fine.
Then I re-installed Alpha Protocol (worked fine) proceeded to install the 1.1 update and found a missing nxcooking.dll was missing (fixed and then found another)
At this point I found 2 different programs that scanned my registry and dlls and each found approximately 150 errors. Therefore I am planning to reformat all 3 drives and re-install again
View 2 Replies
View Related
Feb 23, 2012
I work at the IT department of a school where we have around 600 PC's that need to be maintained. Most things break by the kids and most is fixed my replacing, or simply imaging said computers again.However, after having switched over from Windows XP to Windows 7 we've been having masses of BSODs when loading Windows. Not just the normal PC's, not just linked to one type (although pretty much everything is from HP). But it keeps happening.The most common errors that we've been able to discover are:0x00000018, 0x0000000A, 0x0000007E, 0x000000BE.After having researched these things, they all turned out to have something to do with drivers, not only that, but when trying to boot into safe mode the PC's would all freeze at "classpnp.sys" and sometimes reboot shortly after.Our current solution is simply putting a new Windows 7 image over the computer and it'll work another day or two. It's great that it works again then, but we spend too much time on it.
It can't possibly be the hardware, there are too many different kinds of computers for it to be that. I'm quite sure the problem is somewhere originating from the drivers we install, but then he question comes as to what ruins the drivers? Not to mention that there are also different drivers for the different kinds of PC's.
View 9 Replies
View Related
Mar 29, 2012
recently, i have had many bsod consecutively. recently, i have had about 9 bsod over about 5 days (although the report lists a break between my bsod between 2/21 and 3/27 because i was on break for most of this). in the past i have gotten bsod while playing games, but the recent ones have been while doing mundane tasks such as browsing the internet or watching Internet videos?i have used bluescreenview to try to discover the cause of my problem, but every bsod seems to have a different error and file associated with it. many of them are blamed on ntoskrnl.exe, but have different error messages. some are from different files.i am running windows 7 64 bit on a desktop i built about 15 months ago. since then, i have gotten many error messages, but more recently. i have 8 gb of ram, geforce gtx 470, amb phenom ii black multicore processor, and gigabyte 890gpa-ud3h motherboard. i assembled the desktop components and installed all software new onto the computer.
things i have tried recently: resetting the ram in different slots, running antivirus (i have avg free, malwarebytes, and spybot), cleaning the computer fans, uninstalling/driversweeping the video card drivers and reinstalling, disabling the motherboard sound card through bios so the external sound card i have installed does not interfere, running cmd /chkdsk with fix to try to correct any errors found. i have been dealing with bsod a lot frequently, although it has usually only been about 1 per week in the past. these are extremely frequent recently with multiple per day and it is interfering with my work. attached are the files requested.
View 9 Replies
View Related
Oct 26, 2011
I am building a budgetpc. I bought new in box an AMD X3 450 and a asus m4a78lt-mle mobo, and 4gb of DDR3 1333mhz memory Kingston. First off out of the box the processor posts as a amd x4 b50. Not sure if they packaged the wrong one or the mobo is reading wrong. I don't want to pull the cpu fan back off tok read the cpu. I did a clean install of Windows 7 ultimate. After install finished I went to install drivers, well the mobo drivers cd was not in the mobobox so I planned on installing usb wireless nic and downloading drivers. This is where the problem starts.
When I click on the exe install file I get, a cmd box popup that says program to big to fit into memory. So I cant install any drivers, I downloaded alla the mobo drivers from asus on a thumb drive and copied over to the hard drive. Tried to run those files and i get the same error message. So I reinstalled Windows 7 this time the 64bit version and this time i still get the same error but on other exe files I get a message saying that they are not 64 bit files. Even though I downloaded the 64bit version. So I am not sure what is up. All parts were new in box.
View 1 Replies
View Related
Feb 13, 2012
When I started my pc no D drive. Its not showing up. Only c and dell media direct on the picture
System Dell
Windows 7 OS
View 1 Replies
View Related
Jul 7, 2012
I've just managed to remove the most part of the PCEU virus and im left with a RunDLL error at startup that i assume is looking for the .exe to run the virus but i dont know how to remove the action that causes the runDLL to occur.
View 6 Replies
View Related
Feb 18, 2011
I run Windows 7 32 bit.Recently I noticed when I start up the computer AVG get's an immediate run time error and I cant' turn it back on Explorer (not internet explorer) is unresponsive. For example I can't even rename a file, it wont' let me
If I alt cntrl delete, I can't click anything, including the task manager. It seems like a problem with explorer, it happens every time I restart the computer and I cannot figure it out. (a little side note, I use rocketdock... completely unresponsive).
View 5 Replies
View Related
Apr 13, 2011
I have not seen the problem but according to phone conversations when she turns the PC on she gets a black screen with a message that the file system is being checked, but the checking stops with an "unknown error", the black screen flashes and then she gets to her normal log-in screen. This has been going on for a few weeks (ARRRGGHH). The only reason she called me was that she lost internet connectivity this morning.I had her login, open a command prompt, and type in CHKDSK /f but the system returns an ACCESS denied and says she need elevated credentials to run this. As I said she is the only user and she is listed as an administrator under account controls. I had her create a new user account with administrator privileges but NO JOY she still cannot run CHKDSK /f.This is sounding a bit like a virus but I was wondering if anyone had some thoughts on why, or how, administrator privileges are being overridden?
View 3 Replies
View Related
Oct 28, 2012
I have Win 7 64bit Ultimate.At every startup I get the following errors in that sequence:[CODE]The only symptom is at restart, when the welcome screen disappears for a split second, then comes back (probably at the time when dwm exits and restarts?). Then I have a black screen with the mouse for 2-3 or 3-4 secs (as if the pc struggles to log on to the account) and then normally to desktop. That of course delays the startup but from then on all is normal.
From googling around I interpret those errors something like AERO exits at the beginning but comes back, then problems with logging into the user account but finally logging in is normal. I only have one administrative account and nothing else.I suspect some kind of user profile corruption but cannot pinpoint it, since I get no errors apart from the log.I have only managed to reproduce the following: I get into safe mode and aero is (normally) auto-disabled. When I restart in normal mode, aero is not activated automatically but the computer starts in basic display mode and I activate aero manually.
View 1 Replies
View Related
Apr 26, 2012
Windows boots fine and loads the log-in screen, but usually seconds after starting to load the desktop, she gets a BSOD and the system restarts. The errors alternate between 0x000000E, 0x000000 50 and 0x000000A from what I've observed. Performance Monitor won't generate a report, giving the error "The system cannot find the path specified." I don't know how to correct for that.
Laptop model is Acer Aspire 5734Z-4725
System Specs:
Windows 7 Home Premium 64-bit
CPU:Intel T4500 2.3 Ghz
RAM: 3GB DDR3
Video: Intel GMA 4500
OEM Software from Acer; Install's probably ~2 years old.
View 3 Replies
View Related
Aug 13, 2012
All followed from the BleepingComputer.com virus removal guide. Well I am now going through my Event Logs under Andministrative. They are saying that I recieve five error logs upon starting up. I am getting a constant *****The previous system shutdown at 12:03:33 AM on 8/13/2012 was unexpected......... Event 6008, Event LogNow I do not remember having ever downloaded AMD Overdrive for the next one*****The AODDriver4.01 service failed to start due to the following error: The system cannot find the path specified.......Event 7000, SCMI Did search for the specified file and it is indeed missing .******The following boot-start or system-start driver(s) failed to load: FileDisk........Event 7026, SCMI am not even sure how to replace service or registry files when they vanish****** Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0xAC8112662AE6. The following error occurred: 0x79.
Your computer will continue to try and obtain an address on its own from the network address (DHCP) server...... Event 1001, DHCP-Client******The HP Network Devices Support service terminated with the following error: The specified module could not be found.....Event 7023, Service Control ManagerI am running Windows 7 64bit Home Premium With AMD PhenomII p650 dual-core processor @ 2.60GHz I remember putting in two upgraded 4 gb memory modules but i guess when i took it to geek squad he did what he wanted and so i have 6.00 GB installed memory running service pack 1.I would love to know if i can pull these system files : services or registry entries from a backup or and system image individually without doing a restore or factory default reset
View 1 Replies
View Related
May 2, 2012
Dell Inspiron 1545.
Windows 7 Home Premium, Service Pack 1
Pentium Dual-Core CPU T4200 @ 2.00GHz
4.00 GB
64-bit Operating System
This error keeps coming up and keeps making startup time very lengthy or not at all.
Log Name: Microsoft-Windows-Diagnostics-Performance/Operational
Source: Microsoft-Windows-Diagnostics-Performance
Date: 30/04/2012 21:11:10
Event ID: 351
Task Category: Standby Performance Monitoring
Level: Error
[Event Log] .......
I tried editing the register and I tried updating my drivers (no yellow triangles) but nothing has worked?
View 5 Replies
View Related