I use WhoCrashed to analyze these errors but I dont know how to solve. Maybe my hardware cause these.
Processor: Intel Core 2 Quad CPU @ 2.40 Ghz
Ram: 2GB Corsair
OS: Windows 7 Ultimate 32-bit
VGA: ASUS 8600 GTS
Mainboard: ASUS Striker Extreme
I have been trying to resolve some BSOD I got on my PC. To do this I also re-installed windows several times. I build and install everything by myself for years, but this is the first PC with a lot of BSODs. I used the Debugging Tool for windows to check the minidumps by myself, but as far as my knowledge goes, I didn't find anything special in there. The only thing that was obvious was that in all BSODs the ntoskrnl.exe was involved. This was something BlueScreenView revealed also. In my opinion however it seems there is more to it, since the ntoskrnl.exe could probably also crash because of another driver or hardware problem.On my previous fresh Windows 7 Install I did found out once that alot of BSOD I had at that time were caused by a bad Creative driver for my X-Fi. On the web I found a useful hint, because other X-Fi users pointed to the beta-drivers for the card. The official Creative drivers are almost two years older then these beta drivers, so obviously the beta drivers should be the first choice. These drivers are the ones I use now. I also had some problem with my OCZ Vertex 3 MI, like most owners of this hardware, and the problem was the unstable firmware. I am using the latest firmware now, which is 2.15, and that made the system alot more stable. The third problem is happening in POST: my logitech G110 keyboard features an USB hub and connection for media. These kind of USB keyboards had some problem with recognision and initialisation in the UEFI BIOS. For that I also updated to the latest BIOS for my motherboard.
All in all you can see I discovered and tried to fix a lot of different causes for BSODs. I also ran memtest once on the system for two hours, but this was in Dual Channel setup. Didn't gave any errors anyway.The latest minidump is created by the use of Verifier. I turned verifier on to test the two drivers for my AMD HD6970(crossfired). After 5 minutes in windows the BSOD appeared. I am using AMD Catalyst 12.1 drivers. I tried this, because the BSODs all are different then the ones I had on previous Windows 7 installations (on the same pc), but the only thing I changed in the current installation, was the AMD 12.1 drivers.I reinstalled windows about two weeks ago, after using Secure Erase on my SSD. I installed only the latest drivers for all the things that need drivers. The complete installation, including windows updates and drivers, was without any fault. One day later the first BSOD appeared, etc. I use the system to play Battlefield 3 only, since the fresh install. Strangely, I played more then 50 hours in the game, without any crash or BSOD! The new AMD FX-8150 processor is the first to support native 1866 MHz DDR3. The motherboard specification showed that the board supported 1866 (OC), thus it's seen as an overclock. I set all settings in bios like the ram specificiation told, which is: 9-11-9-27 2T @1.65V. Still, it could be that the 1866 MHz is too much on standard NB voltages? It's something I couldn't find an answer to on the internet, and since I never overclock I don't have that much experience with the voltages.
All BSODs happened in different situations, like just after windows log in, or when I start a program, or when idling, or when browsing the internet.Since I couldn't figure out any more usefull details out of the minidumps, I hope someone here with more experience could check the attached files.
Computer is a few years old, a home build, running Windows 7 Home Premium x64. Haven't really had too many problems other than the occasional BSOD or random restart, but it's gotten a lot worse lately so I wanna get to the bottom of it.The two errors I've gotten are Memory Management and System Service Exception, both seem to be linked to the ntoskrnl.exe file. I also ran the System File Checker and got the following error reported: "Cannot repair member file [l:24{12}]"kerberos.dll" of Microsoft-Windows-Security-Kerberos". Lastly I ran the windows memory diagnostic and it detected several hardware errors.
1)A system restore to a couple weeks ago
2)Repair the system/OS with my Windows 7 disc
3)Replace the RAM
Wanted to post here before I try any of those though. Whew ok sorry to be long winded but wanted to provide as much info as possible.
[code] I couldn't do a health report due to being stuck with safe mode with networking. The BSOD started about two months ago while the gf was using it and didn't happen for me till yesterday. As of now I can get it to start normally but It crashes any time I open anything. I tried swapping ram and no change. I honestly don't know a whole lot about windows 7.
View 9 Replies View RelatedI've been getting BSODs randomly while playing Arma 2 with the Dayz mod. At first I thought it must be something with the game but I've also gotten BSODs playing Red Orchestra 2: Heroes of Stalingrad but I've also played other games like Portal 2 without problems. Thinking it might be driver related I did a fresh install of windows but to no avail.Half the time the game will crash randomly anywhere from 10 minutes of play to 4 hours giving a 0x000005 exception code. The other half of the time my computer will hang and BSOD giving me a different bccode almost every time. The most recent is 10007e and the only other one I remember is d1 which is one of the few that I've gotten multiple times.The Windows Desktop Manager has also crashed twice but I'm not sure it that is related.It was custom built a year ago and was problem free until about a month ago when the BSODs start. They stopped for a while but started again about a week or two ago.
View 9 Replies View RelatedThis is my gf's custom pc she built herself about 6 years ago. I has been used and abused by her siblings. It was having all kinds of problems so she had a friend look at it and clean everything inside. It was still crashing so I reformatted and reloaded the OS, trying to just get a clean start. Although, the issue of crashing has been improved through this, it is not cured.
I get BSOD while playing games, surfing the web, while sitting idle, after coming back from sleep, pretty much anytime. Sometimes I get no BSOD for hours, other times its more constant.
sometimes it says DRIVER_IRQL_NOT_LESS_OR_EQUAL
usually usbport.sys / nvlddmkm.sys
and usually 0x000000D1
So a few months ago I started getting BSOD while rendering with Adobe Premiere. The odd part was that I would only get them when actually using export from with Premiere. If I queued them in Adobe Media Encoder it would generally be fine. Eventually things persisted to BSOD randomly occurring, sometimes 5 a day sometimes weeks a part. Eventually I bought a new SSD and reinstalled Windows. Things returned to normal, with BSOD only occurring while using export, but today things seemed to have returned to there old ways.
I may also add that since I've built this computer things have acted weird. Chrome plugins randomly crash. Shockwave player crashes constantly. I can't install DirectX.
recently, i have had many bsod consecutively. recently, i have had about 9 bsod over about 5 days (although the report lists a break between my bsod between 2/21 and 3/27 because i was on break for most of this). in the past i have gotten bsod while playing games, but the recent ones have been while doing mundane tasks such as browsing the internet or watching Internet videos?i have used bluescreenview to try to discover the cause of my problem, but every bsod seems to have a different error and file associated with it. many of them are blamed on ntoskrnl.exe, but have different error messages. some are from different files.i am running windows 7 64 bit on a desktop i built about 15 months ago. since then, i have gotten many error messages, but more recently. i have 8 gb of ram, geforce gtx 470, amb phenom ii black multicore processor, and gigabyte 890gpa-ud3h motherboard. i assembled the desktop components and installed all software new onto the computer.
things i have tried recently: resetting the ram in different slots, running antivirus (i have avg free, malwarebytes, and spybot), cleaning the computer fans, uninstalling/driversweeping the video card drivers and reinstalling, disabling the motherboard sound card through bios so the external sound card i have installed does not interfere, running cmd /chkdsk with fix to try to correct any errors found. i have been dealing with bsod a lot frequently, although it has usually only been about 1 per week in the past. these are extremely frequent recently with multiple per day and it is interfering with my work. attached are the files requested.
I am trying to get my wife's new computer up and running without any BSOD or program failures. Note that the system was not initially set up to capture the dmp files so all the earliest ones are missing. I presented the initial problems to the original seller who recommended sticking with MSE and uninstalling Norton 360 and I did that. Another forum suggested that Virtual Memory was the problem and I disabled and restored VM. Still having multiple crashes and I am hoping that I can get real help here. I do note that all the crashes have ntoskrnl.exe in the driver stack although sometimes alone and sometimes with other drivers.[CODE]
View 2 Replies View RelatedToshiba Satellite 655, 64 bit OS, Intel. Celeron CPU 925@2.30 GHz
View 6 Replies View RelatedI wanted to install something in my laptop, but, DVD drive is NOT THEREin My Computer. So, I think that I should relaunch explorer.exe. then, bad things start to happen, all icons is gone and the icons change to "Folder" icon. If I want to open something in taskbar, it will be endless loading.
And in my task manager, it is flooded with explorer.exe (800-900 processes)
I'm using Windows 7 Ultimate 64 build 6.1 I cant update because if I launch Windows update, it will freeze.
I downloaded and played the Diablo 3 beta for my first time. When I got in game, i noticed that every time I tried to move my character, the game would freeze up like 10 seconds. Because this was happening I tried to restart the game. Turns out that didn't help so i proceeded to trying to restart my computer to see if that would help, but as the screen was at the part where it shows that you are logging off, I got a BSOD. I have gotten BSODs before, and simply had to restart while on them to get the computer to run normally, but this time when I got the BSOD and tried to usual method of restarting, I kept getting BSODs that automatically restarted the computer again in an infinite loop of BSODs. To stop it from automatically restarting after the BSODs, I hit the option to make it not auto restart after the BSOD so I can get a look at what it actually said. I noticed that when i was getting the BSODs, the error messages weren't always the same. Some said things like "SYSTEM_SERVICE_EXCEPTION" and "BAD_POOL_HEADER."I also noticed that the number and letters at the bottom weren't the same with every BSOD. Since I am unable to access to my computer's desktop, I couldn't pull a proper log of the errors so I had so i just went ahead and read some and wrote them down by hand.
View 8 Replies View RelatedI have searched everywhere but I have been unable to find anyone having the same problems as I. I am running 64bit windows 7.I have been trying to get the computer to updates, though when I reboot it fails to configure the updates, gets to 35% and always fails with error code 80071AB0. After searching Microsoft Support, some people recommended running sfc.exe to scan for corrupted files, then to fix them and reboot. Well, I found no corrupted files on the drive hence there was nothing to fix. Also, I have tried to download the Microsoft Fix-It and run it, though that is to no avail as well. I have attempted to preform a clean boot with my anti-virus disabled to rule out a software problem and that also didn't change anything.When I open Windows Updates and attempt to install them, I get an 80070643 error.I also get these same errors when trying to install the updates from a downloaded file.
View 6 Replies View RelatedI just recently contracted a virus and opted to reformat 2 of my 3 hard drives (the 3rd was used to store documents and backups form the other 2) After reformat/install everything seemed fine until I proceeded to re-install several of my games.
Borderlands installed and proceeded to give me an error that one of the physX .dlls was missing. I managed to find the dll and get it re-installed but then another physXextensions.dll was missing which I was not able to fix, but the game itself works and plays fine.
Then I re-installed Alpha Protocol (worked fine) proceeded to install the 1.1 update and found a missing nxcooking.dll was missing (fixed and then found another)
At this point I found 2 different programs that scanned my registry and dlls and each found approximately 150 errors. Therefore I am planning to reformat all 3 drives and re-install again
I work at the IT department of a school where we have around 600 PC's that need to be maintained. Most things break by the kids and most is fixed my replacing, or simply imaging said computers again.However, after having switched over from Windows XP to Windows 7 we've been having masses of BSODs when loading Windows. Not just the normal PC's, not just linked to one type (although pretty much everything is from HP). But it keeps happening.The most common errors that we've been able to discover are:0x00000018, 0x0000000A, 0x0000007E, 0x000000BE.After having researched these things, they all turned out to have something to do with drivers, not only that, but when trying to boot into safe mode the PC's would all freeze at "classpnp.sys" and sometimes reboot shortly after.Our current solution is simply putting a new Windows 7 image over the computer and it'll work another day or two. It's great that it works again then, but we spend too much time on it.
It can't possibly be the hardware, there are too many different kinds of computers for it to be that. I'm quite sure the problem is somewhere originating from the drivers we install, but then he question comes as to what ruins the drivers? Not to mention that there are also different drivers for the different kinds of PC's.
I am building a budgetpc. I bought new in box an AMD X3 450 and a asus m4a78lt-mle mobo, and 4gb of DDR3 1333mhz memory Kingston. First off out of the box the processor posts as a amd x4 b50. Not sure if they packaged the wrong one or the mobo is reading wrong. I don't want to pull the cpu fan back off tok read the cpu. I did a clean install of Windows 7 ultimate. After install finished I went to install drivers, well the mobo drivers cd was not in the mobobox so I planned on installing usb wireless nic and downloading drivers. This is where the problem starts.
When I click on the exe install file I get, a cmd box popup that says program to big to fit into memory. So I cant install any drivers, I downloaded alla the mobo drivers from asus on a thumb drive and copied over to the hard drive. Tried to run those files and i get the same error message. So I reinstalled Windows 7 this time the 64bit version and this time i still get the same error but on other exe files I get a message saying that they are not 64 bit files. Even though I downloaded the 64bit version. So I am not sure what is up. All parts were new in box.
I was told second hand by her that it was after a windows update install). I attempted startup repair multiple times with no real outcome until i swapped over my main os hdd and was then able to run startup repair on her hdd. From that point on I was able to run win 7 from either drive rather succesfully until the next day. I receieved a text message from the wife while I was at work stating windows updated again and startup was not possible ( thus again i have no idea what update it was). since that point I have been unable to even run startup repair.
View 3 Replies View RelatedWe have three medical clinics and the front desk staff float from clinic to clinic depending on their schedule. I only started here a few months ago and I am working on upgrading their Dell xp systems to Windows 7 systems.The problem begins to crop up when say a user named Sally will come in and sit down at this system for the first time.. Well, she needs to login, click on outlook icon, let it find her exchange PST and copy settings to her user profile, then she launches the application for the scanner that she uses to scan in ID's and insurance cards for every patient coming in.. The scanner is set to default settings and needs to be tweaked on color depth and double sided, etc.. Then after that, she needs to launch her Medical EMR application.. and then choose various options in the citrix client, ..TL;DR - Each user needs to spend 20 minutes resetting the defaults at this updated system.
Well this is fine except, I am planning on updating 2 front desk systems at each clinic, the user Sally will need to do all these things EACH time she finds herself sitting down at a system I just swapped out the previous evening.My thought is this, put a single system down in one clinic and let it sit a week giving most of the float users a chance to work on it for a day, setting all of their preferences etc.Once I get a bunch of them with user profiles on the local drive, grab an image of that drive and just deploy that to each system I roll out..Couple issues I am running into:First would be that I would have to register each Windows 7 copy with a new serial, which I have The next issue is, we have a mis-mash of Dell optiplex systems. 330's - 380's even a couple 320's..
I have been getting a fairly random blue screens and I cannot pin point it myself. I know a bit about diagnosing and repairing issues but this one is just a pain in my butt. I am uploading the dump files and I hope someone can give me a hand I am running a sfc scan right now to test for any problems too. Also got this off the TSG SysInfo Program.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X3 445 Processor, AMD64 Family 16 Model 5 Stepping 3
Processor Count: 3
RAM: 8191 Mb
Graphics Card: NVIDIA GeForce 9600 GT, 512 Mb
Hard Drives: C: Total - 476837 MB, Free - 246483 MB;
Motherboard: BIOSTAR Group, N68S3B
Antivirus: Norton Security Suite, Updated and Enabled
I have attached a second monitor to my laptop which runs Windows 7, however, I need to set different resolutions for different monitors, because the display does not fit to fill the screen on both monitors.
It is also noted that the display is replicated, and I would like to have the effect of having different desktops e.g. being able to use different applications such as debugging code on one monitor on an IDE such as Visual Studio, and, viewing the browser on the other monitor.
Currently it does not seem possible since the behavior seems to be that the same resolution is replicated on both monitors.
I'm having a bit of trouble trying to get two monitors, a small 1024x768 LCD, and a 46" 1920x1080 TV, to display the same wallpaper at different resolutions. My graphics card is older, a Nvidia Quadro FX 1700, but it is perfectly capable of driving both displays at the same time. It's a minor annoyance, but I'd like to get it working if it's possible.
View 4 Replies View RelatedI am brand new to this site so forgive me if I miss a step. I was wondering if someone who is good at debugging dump files could give me a second set of eyes on these 2 I will attach. One BSOD is DRIVER_POWER_STATE_FAILURE (ntoskrnl.exe) and the other is UNEXEPECTED_KERNAL_MODE_TRAP (ntoskrnl.exe).I have this problem across 15 identical laptops with fresh installs of Win 7 Pro 64Now my guess is this will boil down to a BIOS upgrade, but if there are driver conflicts within these dump files
View 6 Replies View RelatedThe computer BSOD multiple times a day and even more frequently when playing SWTOR.
View 6 Replies View RelatedMy custom built machine is about 9 months old. For the last 3 months or so it has been crashing multiple times per day (usually 1-2 per day). It doesn't usually crash for atleast 3-4 hours after the reboot. I can't find any thing to make it crash on demand and don't notice myself doing the same time each time it crashes. It seems pretty random.
I am running Windows 7 Ultimate 64bit. It is the full retail version and was the first OS installed on this hard drive.
I have attached the results of the BSOD Dump & System File Collection app and the system health alert.
Got to be quick because I've already had a BSOD trying to post this. This is a new build. All new components. All kinds of error codes contantly. I've updated Bios, SSD firmware, all drivers I can find, did a clean reinstall of Windows 7, ran memtest86 twice (20 passes total) on both sticks no errors, ran chkdsk -no errors although I see one today from my bios resetting defaults to IDE instead of ACHI - my fault. Ran Driver Verifier and came up with a violation in Event Viewer but I don't know how to read it. And yes I wear ESD straps etc. when I work on it.Also no overclocking / unlocking - everything is stock / default.
View 9 Replies View RelatedI just bought a new computer and it crashes every time i do multiple tasks or play a game.
Here's my spec:
Intel Core I5 2320 3.0GHz LGA1155 BOX (BX80623I52320)
Sapphire Radeon HD 7850 OC 2GB 11200-14-20G
SSD OCZ Agility4 Series 128GB SATA3 2.5'' (AGT4-25SAT3-128G) 128 GB XFX Core 550W 120mm 80+ (P1-550S-XXB9)
Good Ram DDR3 4096MB PC1333 CL9 (GR1333D364L9/4G)
Asus DRW-24B5ST SATA CZARNY (DRW-24B5ST/BLK/G/AS) ASRock B75 Pro3-M
Already crashed 2 times today in 30 minutes. The first time i was just browsing, the second time i was playing Skyrim. This happens randomly every day. Windows 7 x64 This is what what i got from my latest crash.
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7600.2.0.0.256.1
ID:2068
[code]....
We have 20 pcs that are all identicle
Asus P8z68 v Gen3 mboard
i7 2700k 3.4 proc
win 7 64 Ent
2 x 1tb hdd raid 0
1 x OCZ Vertex 3 SSD for caching
4 x 4gb corsair vengance ddr3 ram
Geforce 560ti phantom GFx card
Corsaid 850 psu
We have created a network image using Acronis which has so far been successfully installed on 4 of these machines. However, we have come to the 5th machine and as of last night it refused to power on. Then after 10-15 mins it came up and started to load windows but gave us a BSOD and everytime it restarted itself it would give us a different message. I have attached the logs for someone to look at to see if this is possibly a PSU issue or something else.
The machines have:
Windows 7 enterprise
office 2010
adobe reader x
silverlight
IE 9
Firefox
McAfee
Visio Viewer
i've been getting BSOD's on a daily basis while playing , browsing , or just booting up my windows?
Computer specs : Intel QuadCore Q6660 @2.40ghz, 2.4gb RAM, 32-bit Windows 7 OS nVidia GeForce 9400 GT , maxtor ide 80gb HDD, asus p5w64 WS pro motherboard, Realtek RTL8139/810x Family Fast Ethernet NIC, onboard soundcard
i've been getting BSOD for about 2-3 weeks now since updating some drivers on my laptop and it is really annoying. I have Windows7_Vista_jcgriff2 with all the required files needed for someone to look at.
System Specs: Windows 7
- x86 (32-bit) or x64 ? x86
- the original installed OS on the system? No was originally Windows 7 Home Premium
- an OEM or full retail version? OEM
- What is the age of system (hardware)? 3 years
- What is the age of OS installation (have you re-installed the OS?) 6-7 Months
I keep getting a BSOD when im playing WoW then opening IE or downloading
View 3 Replies View Related