I'm having a bit of trouble trying to get two monitors, a small 1024x768 LCD, and a 46" 1920x1080 TV, to display the same wallpaper at different resolutions. My graphics card is older, a Nvidia Quadro FX 1700, but it is perfectly capable of driving both displays at the same time. It's a minor annoyance, but I'd like to get it working if it's possible.
View 4 Replies
I have this computer, with a GeForce 6200 TurboCache gfx card in it. With two Samsung SyncMaster 931BW attached. One VGA, one DVI.
Earlier, this pc was running windows XP, and both displays were set to their native resolution of 1400 x 900. I deployed Windows 7 on it, and now I can't set both monitors. One is at 1400 x 900, the other defaults to 1024 x 768, AND they get swaped around on the multi display. The left gets put on the right, etc. If I try and select 1400 x 900, it flickers but no resolution change.
Yes I'm on the latest Nvidia driver for this brand of card. No I haven't tried another card yet because I can't find a spare. It was working in XP, and trying to get to the bottom of this is frustrating.
If you need more information, ask. I'm going to be here for 4 more hours.
Also, in case it's relevant - In the Nvidia control panel, under 'change resolutions' It correctly detects both sync masters. It's detecting the VGA one as 'VGA - PC display', but the DVI one as "composite - standard definition television"
I've been browsing the web to find an answer for my question, but with no luck.
I use Windows 7 on a PC which is setup to be both an office and an entertainment computer. Therefore it's connected to two seperate screens with one graphic card. The screens are one 19" desktop screen (1280x1024) and one 40" Samsung LCD TV (1920x1080). When I'm browsing the web, working with documents etc. I use the desktop screen and when I watch movies, pictures etc. I use the TV.
Now I'm trying to switch between them in an easy way. I've tried several third party applications but eventually found that the best way to switch between these in fact is to use Windows 7 built-in software. I've setup Windows to recognize the two seperate screens and I switch between them by using the "Multiple Displays" option in the settings. I then switch by using "show desktop only on 1/2".
Do anyone know if this switch can be done by using a hotkey combination through Windows or through some other software? It's not the end of the world right clicking the desktop and doing it, but it'd be nice to save a few clicks every time.
I recently purchased a second monitor and now have two working at the same time. It lets me have a lot more windows open at any given time, but since the windows task bar is only displayed on the main monitor it gets very clustered when I open all the windows I need. This makes it hard swapping between windows, especially when I'm working on the secondary monitor and have to move the mouse over to the primary to pull up a window that's behind all the others.
I'm wondering if there's a way to extend the task bar across both monitors? I've looked in the properties of both the task bar and the nvidia control panel, but found nothing.
I am trying to get my wife's new computer up and running without any BSOD or program failures. Note that the system was not initially set up to capture the dmp files so all the earliest ones are missing. I presented the initial problems to the original seller who recommended sticking with MSE and uninstalling Norton 360 and I did that. Another forum suggested that Virtual Memory was the problem and I disabled and restored VM. Still having multiple crashes and I am hoping that I can get real help here. I do note that all the crashes have ntoskrnl.exe in the driver stack although sometimes alone and sometimes with other drivers.[CODE]
View 2 Replies View RelatedWe have three medical clinics and the front desk staff float from clinic to clinic depending on their schedule. I only started here a few months ago and I am working on upgrading their Dell xp systems to Windows 7 systems.The problem begins to crop up when say a user named Sally will come in and sit down at this system for the first time.. Well, she needs to login, click on outlook icon, let it find her exchange PST and copy settings to her user profile, then she launches the application for the scanner that she uses to scan in ID's and insurance cards for every patient coming in.. The scanner is set to default settings and needs to be tweaked on color depth and double sided, etc.. Then after that, she needs to launch her Medical EMR application.. and then choose various options in the citrix client, ..TL;DR - Each user needs to spend 20 minutes resetting the defaults at this updated system.
Well this is fine except, I am planning on updating 2 front desk systems at each clinic, the user Sally will need to do all these things EACH time she finds herself sitting down at a system I just swapped out the previous evening.My thought is this, put a single system down in one clinic and let it sit a week giving most of the float users a chance to work on it for a day, setting all of their preferences etc.Once I get a bunch of them with user profiles on the local drive, grab an image of that drive and just deploy that to each system I roll out..Couple issues I am running into:First would be that I would have to register each Windows 7 copy with a new serial, which I have The next issue is, we have a mis-mash of Dell optiplex systems. 330's - 380's even a couple 320's..
I have been getting a fairly random blue screens and I cannot pin point it myself. I know a bit about diagnosing and repairing issues but this one is just a pain in my butt. I am uploading the dump files and I hope someone can give me a hand I am running a sfc scan right now to test for any problems too. Also got this off the TSG SysInfo Program.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X3 445 Processor, AMD64 Family 16 Model 5 Stepping 3
Processor Count: 3
RAM: 8191 Mb
Graphics Card: NVIDIA GeForce 9600 GT, 512 Mb
Hard Drives: C: Total - 476837 MB, Free - 246483 MB;
Motherboard: BIOSTAR Group, N68S3B
Antivirus: Norton Security Suite, Updated and Enabled
I have attached a second monitor to my laptop which runs Windows 7, however, I need to set different resolutions for different monitors, because the display does not fit to fill the screen on both monitors.
It is also noted that the display is replicated, and I would like to have the effect of having different desktops e.g. being able to use different applications such as debugging code on one monitor on an IDE such as Visual Studio, and, viewing the browser on the other monitor.
Currently it does not seem possible since the behavior seems to be that the same resolution is replicated on both monitors.
I use WhoCrashed to analyze these errors but I dont know how to solve. Maybe my hardware cause these.
Processor: Intel Core 2 Quad CPU @ 2.40 Ghz
Ram: 2GB Corsair
OS: Windows 7 Ultimate 32-bit
VGA: ASUS 8600 GTS
Mainboard: ASUS Striker Extreme
Since installing a Second 1TB HDD into my system, I've been encountering brief lag before any action performed. For example, clicking Internet Explorer (Stored on HDD1) will completely Freeze the system for about 4 - 6 seconds, before proceeding. Also, clicking on a song or a video to play in Windows Media Player (Music and video stored on HDD2 and Program stored on SDD1) will also incur a 4 - 6 Second system freeze. Also since installation, my games have been slower and overall perfomance have dropped. I can constantly hear my HDD spinning up, asif it is idle every second I don't use it.
My stystem:
Code:
AMD Quad-core 3.0Ghz
8GB DDR3 RAM
40GB SSD / 2 x 1TB HDD
1GB ASUS EAH5670 DDR5 Graphics Card
[code]....
Is there an easier way to accomplish this on my laptop? I took an XP image from the first primary partition and copied it to the 2nd partition. When I rebooted to the second partition I thought wow this is just great!. My only problem is when I found out that the working OS saw the booted 2nd partition as the next drive letter and not C drive. Argggg...
How do I get around this? It's easy on my desktop PC because it has two drives and I keep XP on the 1st partition on both drives. But this seems to be a problem on the 1 drive laptop. People recommend on the internet to use EASYBCD but will this really solve this problem? What is the easiest solution? I am open to entering command line arguments. Could manually switching the "active" partition solve this problem using Gparted?
Once I get this solved I would then like to install Windows 7 and also protect the first two versions of XP. I already have my XP apps set on the first partition so I hope to keep that as-is. What is the best way?
Mum has 1 PC and 2 laptops, is there a version available on pre-order for 3 licenses like you can get for Office Home & Student?
View 4 Replies View RelatedI am using Windows 7 RC and will be moving most of our household PCs to Windows 7. I'm wondering if there is a way to create the same user ID on multiple machines so that no matter what machine a user logs onto they will see their same desktop and have access to their files, programs, bookmarks, same user rights/restrictions, etc.
This may be too much to hope for but thought I'd ask. Perhaps a home server is required or maybe use of Windows 7 file sharing could work?
This may just be an idle thought, but I'm wondering if one could setup a RAID configuration across two or more PCs? I know that one PC can have more than one RAID system in it, and even outside of it, with controller card going to an external case, but how about two totally separate PCs only connected via a Wireless adapter on a network?
View 4 Replies View RelatedWill windows 7 Ultimate allow the installation onto a home PC and laptop with the same installation disc?
View 4 Replies View RelatedAlright so I guess I have a bit of an issue. I had Vista installed on a 300GB harddrive, but I got a new harddrive and moved Vista over to that. Unfortunately I never actually reformated the 300GB hard drive so the bootmgr stayed there but was unused. With the new Vista it started a new bootmgr and is now the default bootmgr. Then I installed Windows 7 and that started a new bootmgr. But the BIOS still selects the Vista bootmgr and so I just added Windows 7 to that one. Except now I want to delete the Vista Bootmgr and the 300GB unused bootmgr and use the Windows 7 bootmgr. The Vista bootmgr no longer works for Windows 7 (Vista cannot correctly find the Windows 7 partition because it is set to the G: partition, but the Windows 7 windows folder is in S
I know I can delete the bootmgrs on the inactive drives, except I don't want to because I have no way of booting to the Windows 7 bootmgr. (Default boots to Vista, which would be gone, and using the Windows 7 DVD to boot uses the 300GB worthless bootmgr) If I use the Windows 7 DVD to repair the startup would it create a new bootmgr in the place of the two I delete or would it find the Windows 7 bootmgr and use that?
I'll be working on this for about another hour but if nothing works I'm nuking all three bootmgrs and rebuilding the bootmgr.
Update: Alright I've managed to get all the bootmgrs exactly the same so that everything boots correctly, however I still want to make the computer use the bootmgr on the 55GB Windows 7 drive because it is a 10,000RPM Raptor.
I have 2 computers
1. DELL Laptop, VISTA Business, 1.3GHZ core duo, 3 GBs Memory, plenty HD
2. Dell Desktop, XP Pro, 3 gbs Memory, 2.3 Core Duo, plenty of HD
question: Can i purchase 1 upgrade CD to Win 7 Home Professional and upgrade both these PCs? I have license numbers for each of these pc's for their respective OS's
So I currently have the RC version of Windows 7 installed and I purchased Win 7 ultimate and wish to do a clean install.
I have 3 HDDs, my main one which Win 7 is installed on now, another one that has nothing on it and another one which stores my media, and will have all my stuff backed up on from my main drive.
When I install windows 7 on my main HDD I will be formating it so everything is gone, once installed again will Windows 7 be able to see my other HDDs with all my files on them. Or will the other HDDs need to be formated for them to been seen.
That is my only problem, I am hoping that they will just be the same they are now, but I am confused because the windows 7 now knows the other HDDs as drive F and E, when it is reformatted I am not sure what will happen.
I have a homegroup set up at home, and I would like to have another homegroup when I am at work.. Home and work have a desktop PC, I have a notebook, so I am always going back and forth. How do I set up multiple homegroups so when I am home, it sees my home desktop, and when I am at work it sees my work desktop..?
View 1 Replies View RelatedI recently have a problem with my network connection. It shows me sometimes that i have mutliple netowrks, one of them says Unknown network.. When those 2 are togheter in my network and sharing center, my internet connection is lost. If i disable and enable my network connection the internet is working and that unknown connection is gone. Anyone can help me with this one? It is kind of annoying to do that thing everyday.
View 4 Replies View RelatedIs there any box bundles that would let me install on multiple computers, looking at 3-10 computers here. Downloading is not an option.
View 11 Replies View Relatedmy windows 7 RC is about to expire, I do have a copy of XP Pro that I got from a buddy of mine...I am not sure if it will work or not using an upgrade version of Windows 7, I want to use the 64 bit version of Win7, and I want to be able to put it on more than just one pc at the same time.
I would like to put win7 on my 2 pc's and my friend's parent's pc. Is there a version of Win7 that I am able to use on multiple pcs at the same time or do I need to buy separate Win7s for each individual pc?
I don't anticipate upgrading to a new pc for myself any time soon, but there is a halfway decent chance that I might sell my current system and be able to get a new one that way. So...an OEM version kinda scares me, but at the same time, if it would definitely be the best value, I would not be totally against it.
Another concern for me would be home, pro, or ultimate...I think ultimate would be kind of a rip-off for what I would need...the only feature looking somewhat interesting it has that pro doesn't would be the encryption thing, but I mean really, I can probably get by without that. I'm leaning towards pro mostly because I'm scared there will be a program I'll want to use that I would need to set up the native xp mode for...but again, do I really need to worry about that too much? Home would be the cheapest and in my mind have the most value, but I'd like to hear from you guys if you think I would want the features from pro or ultimate and if that would represent the best value.
So, it boils down to...
1) Stick with XP pro or go Win7? (I believe either will work fine for my needs...online poker mostly, web surfing, game playing [WoW mostly], and DL'ing/listening to music...but Win7 is so much zippier and cooler looking!!!)
2)Home, Pro, or Ultimate?
3)OEM or Retail?
4)Upgrade or Full?
5)Most important!!! Best way to get on multiple pcs?
im having a problem with my computer i dont know whats going on. i have to click everything and anything several times before it takes action. im running windows 7 home edition. i got a really nice processor and a nice vid card. overall a nice system
View 3 Replies View RelatedI have windows 7 64 and have installed paint shop pro v.7. Every time I open a jpg it opens in a new instance of paint shop instead of opening the picture in the already running instance of the program. I know that there is a way to correct this, but I don't know it, there are several threads online about how to solve this in XP, but not windows 7.
View 7 Replies View Relatedwhen I open a task (Ex. Firefox) multiple processes shows with firefox.exe name in the 'Task Manager'.
firefox.exe
svchost.exe
i have speakers connected to the hdmi and have a fm transmitter connected to the headphones jack. how do i get the soud to come out of both? Picture:
View 2 Replies View RelatedWindows 7
When I click on the Internet Explorer icon on my desktop to open a session, two internet explorer sessions open. This went on for 2-3 weeks. Now when I do the same thing 3 sessions open. How do I get back to opening just one session.
First- if I have a maximized window open, any window that I open that's not maximized, opens and disappears to the taskbar icon for it
Second- I can't view more than one window of the same program at the same time. No matter how small I resize it, the second window sends the first window to it's taskbar icon.I've run sfc /scannow, scanned with Avast & Malwarebytes. Restored folder options in the view tab & set it to open in it's own window.
Toshiba Satellite 655, 64 bit OS, Intel. Celeron CPU 925@2.30 GHz
View 6 Replies View Relatedobviously you can see that I'm new here and here for a specific reason and this being my reason. So I just noticed that I had 5 explorer.exe processes running before with no windows/browsers open. I could tell my main one apart because it used more memory and the others all had *32 at the end (I'm using an x64 version of Win 7 Home)
I ended them and nothing happened, but then I also checked msconfig under the start-up tab and saw.
I have Windows 7 64 bit laptop - and suffered two crashes today, while it was generally idling. The only new thing today is that there were some Windows update last night and an Adobe Flash update this morning.
View 2 Replies View Related
