I recently purchased a second monitor and now have two working at the same time. It lets me have a lot more windows open at any given time, but since the windows task bar is only displayed on the main monitor it gets very clustered when I open all the windows I need. This makes it hard swapping between windows, especially when I'm working on the secondary monitor and have to move the mouse over to the primary to pull up a window that's behind all the others.
I'm wondering if there's a way to extend the task bar across both monitors? I've looked in the properties of both the task bar and the nvidia control panel, but found nothing.
I'm having a bit of trouble trying to get two monitors, a small 1024x768 LCD, and a 46" 1920x1080 TV, to display the same wallpaper at different resolutions. My graphics card is older, a Nvidia Quadro FX 1700, but it is perfectly capable of driving both displays at the same time. It's a minor annoyance, but I'd like to get it working if it's possible.
I've been browsing the web to find an answer for my question, but with no luck.
I use Windows 7 on a PC which is setup to be both an office and an entertainment computer. Therefore it's connected to two seperate screens with one graphic card. The screens are one 19" desktop screen (1280x1024) and one 40" Samsung LCD TV (1920x1080). When I'm browsing the web, working with documents etc. I use the desktop screen and when I watch movies, pictures etc. I use the TV.
Now I'm trying to switch between them in an easy way. I've tried several third party applications but eventually found that the best way to switch between these in fact is to use Windows 7 built-in software. I've setup Windows to recognize the two seperate screens and I switch between them by using the "Multiple Displays" option in the settings. I then switch by using "show desktop only on 1/2".
Do anyone know if this switch can be done by using a hotkey combination through Windows or through some other software? It's not the end of the world right clicking the desktop and doing it, but it'd be nice to save a few clicks every time.
I have this computer, with a GeForce 6200 TurboCache gfx card in it. With two Samsung SyncMaster 931BW attached. One VGA, one DVI.
Earlier, this pc was running windows XP, and both displays were set to their native resolution of 1400 x 900. I deployed Windows 7 on it, and now I can't set both monitors. One is at 1400 x 900, the other defaults to 1024 x 768, AND they get swaped around on the multi display. The left gets put on the right, etc. If I try and select 1400 x 900, it flickers but no resolution change.
Yes I'm on the latest Nvidia driver for this brand of card. No I haven't tried another card yet because I can't find a spare. It was working in XP, and trying to get to the bottom of this is frustrating.
If you need more information, ask. I'm going to be here for 4 more hours.
Also, in case it's relevant - In the Nvidia control panel, under 'change resolutions' It correctly detects both sync masters. It's detecting the VGA one as 'VGA - PC display', but the DVI one as "composite - standard definition television"
I just changed all the drivers in my computer and updated my old xp os to windows 7. I am having a problem, I've pinned iTunes to my task bar, and unlike the other programs, when the short cut is highlighted when it is open, but with iTunes, another icon is created.
This tutorial will show you how to add multiple clocks to the Windows 7 taskbar. This is useful for people who monitor other time zones or travel with their laptops.
Normally, I've got tons of pages grouped in a single icon, with a 1920x1080 monitor, and a two-row taskbar. Like thisI despised that 'scroll' feature, and I was wondering if there might be a way or two, to expand that list to, say 2 or 3 column? So, there would be no need for the scroll thingy, and viewing/finding a particular window would be much, much easier.
I've recently migrated from Windows XP Pro to Win 7 Ent and now I see that it's not possible to Ctrl+Click on taskbar to select multiple windows and then e.g. close them all via context menu. I'm wondering if this is something that can be configured in Win 7 just like it worked in Win XP?
It used to be that I could pin multiple documents to their host program on the task bar, and I could run more then just the program itself, for example with good chrome I could right click and choose to open a new window, a new incognito window and a few other options. I did some windows updates a little while back and all the other options have disappeared as well as my ability to pin files to programs. I was wondering if there was a way to get that back since it was super convenient to have. Most programs used to have many options and recent files, etc. Now this is the most I ever get for any program.
I recently upgraded my FF 7.0.1 (or whatever the most up-to-date version of 7 is/was) to 8.0 and am noticing an issue. The problem I am experiencing is that when I launch FF (regardless if its done via the start menu or the button pinned to my taskbar), it adds a separate taskbar button (a la previous versions of Windows) instead of how Windows 7 normally handles such things. In addition to this, it also does not reflect having multiple tabs/windows open on the taskbar button (the attached image shows how the button for IE(9) displays the different tabs I have open in it, as well as the vertical lines next to the button which represent the number of tabs/windows open; however, the Firefox button does not function in either way, but you can see in the image that I have 3 tabs open in the browser window).Are these compatibility bugs between Windows 7 and Firefox (that the Mozilla devs need to address)?
is it possible to group multiple icons which have been pinned to the taskbar into a folder? so when hovering over the folder it should open to show what is in it? for example could i put internet explorer, google chrome, and mozilla firefox into a folder so there is not 3 icons but jsut one?
i have Outlook 2007 pinned to my taskbar. i have notification behavior set to Hide icon and notifications. I have Outlook set to Hide When Minimized.k, so, whenever i want to see Outlook, i simply click the pinned shortcut on taskbar. when i want to hide it, i click the same icon, and it disappears and goes back to the small pinned icon form. i repeat if i want to see outlook again.... however! doing this, i noticed that each time i click the pinned icon, it is loading a new instance of Outlook 2007.i realized this when i saw the notifications area, and realized there were multiple Outlook 2007 windows available. (right clickign the notifications icon displays the "Open Outlook" button, not as a link, but as a menu.)how can i prevent taskbar from loading multiple instances?
When I have multiple windows open [i.e. outlook is open with 4 emails open as well] and I hover over the Outlook folder in the toolbar which then shows previews of all the emails, I want the ability to close a single email and keep the others previewed. Right now, if I close one, the other open ones "auto minimize" I know this is an option as I've seen it operated the way I want it.
I currently have it set to turn off my displays at 3 minutes of inactivity, and put the computer to sleep after 10 minutes.Sometimes, the displays won't turn off after 3 minutes, but it will then put the computer to sleep after 10 minutes while the displays are still on. More often, it will turn the displays off, but won't ever put the computer to sleep.Why wouldn't the computer go to sleep?Wouldn't any activity turn the displays back on? And so if they don't come back on, why wouldn't it go to sleep?why wouldn't the displays turn off, and then it goes to sleep?
In my friend's PC, I wanted to extend his (C) Drive's Size. But I failed to do it.Firstly, I used "Disk Management" to do it,then I used diskpart and then a Third Party Software. All of them failed to extend C drive.
I have Windows 7 on a Partition with 37.22 GB and Unallocated space with 37.31 GB. I want to extend the Windows 7 Partition to the Unallocated space. Is there any way to extend the current/boot partition? I tried diskpart but obviously that won't work I guess since I read later that you can't do it on the boot partition? Then how else are you supposed to do it?
I just recently installed windows 7 on a partition that previously had vista, and backed up my "users" folder on another partition. I copied all the files back to the 7 partition and used a program like partition magic to delete the backup and extend the 7 partition. my computer won't boot now. I've tried resetting the mbr, bcdedit, bootfix
I was trying to extend my Partition on the C drive I shrunk my D: drive and transferred/backed up the data to the new partition and deleted to old one, now it will not let me add the unallocated space to the C: drive...
confirm that a windows 7 desktop cannot be extended across multiple monitors via a common vga or dvi y splitter. Right now it only clones, and doesn't extend. So is the box of y splitters I have just a pile of junk now?
I am in the process of installing windows 7 on my pc... I would just like to know what the implications of extending a partition are. Will I lose data that is on the partition I wish to extend?
So basically I have two partitions: Vista C: and Windows 7 D:, boot file is on C:
I had installed Jolicloud OS on my computer and it carved out a drive from my Windows 7 partition. later on I EasyBCD to remove grub when I figured out that it will be a pita to get my wifi working. afterwards i booted from the jolicloud installer, then used Gparted to extend the Windows 7 partition back to it's original size. i then rebooted, and it ran the disk repair, but now Windows 7 won't boot, giving me:
0xc0000225
"Windows did not start correctly. A recent hardware or software change might
be the cause.
If you have aWindows installation disc, insert the disc and restart your
computer. Click system recovery options, and then choose a recovery tool.
(Startup Repair, available in some versions of Windows, can automaitcally
diagnose and fix startup problems.)
If you do not have this disc, contact your system administrator or computer
manufacturer for assistance.
I've tried to use the recovery feature on my disk, but it cannot see my hard drive and it's not able to locate a driver.
help? Windows Vista is AGONY
also: Easy BCD whe running from Vista says:
There are a total of 2 entries listed in the Vista Bootloader.
Bootloader Timeout: 10 seconds.
Default OS: Microsoft Windows Vista
Entry #1
Name: Windows 7
BCD ID: {6d574dfa-cef3-11de-a588-9966156464d7}
Drive: Deleted Partition
Bootloader Path: Windowssystem32winload.exe
Windows Directory: Windows
Entry #2
Name: Microsoft Windows Vista
BCD ID: {current}
Drive: C:
Bootloader Path: Windowssystem32winload.exe
Windows Directory: Windows i'm going to re add the entry for 7 via easybcd. if you don't hear from me in ten minutes then you will know that this didn't work.
Just updated from Vista 64 to Windows7 64 build7100 .
Using DellWFP 32" monitor and ATI v7200 video card.
My desktop will not extend all the way left to right or top to bottom on my monitor.
It has black bar around desktop extending to edges of monitor.
When I set screen resolution to max 2560x1280 or recommended 1280x800 , then desktop goes full height and width of monitor. However these settings do not work for me at all.
Any other resolution setting and desktop is centered on monitor, very small with black all around it.
Here is image I took with my camera, as a screen shot only displays the desktop. This shows how the desktop is residing within the monitor. I've tried every resolution setting there is for this video card , checked to make sure I had the latest drivers also.
I am trying to get my wife's new computer up and running without any BSOD or program failures. Note that the system was not initially set up to capture the dmp files so all the earliest ones are missing. I presented the initial problems to the original seller who recommended sticking with MSE and uninstalling Norton 360 and I did that. Another forum suggested that Virtual Memory was the problem and I disabled and restored VM. Still having multiple crashes and I am hoping that I can get real help here. I do note that all the crashes have ntoskrnl.exe in the driver stack although sometimes alone and sometimes with other drivers.[CODE]
We have three medical clinics and the front desk staff float from clinic to clinic depending on their schedule. I only started here a few months ago and I am working on upgrading their Dell xp systems to Windows 7 systems.The problem begins to crop up when say a user named Sally will come in and sit down at this system for the first time.. Well, she needs to login, click on outlook icon, let it find her exchange PST and copy settings to her user profile, then she launches the application for the scanner that she uses to scan in ID's and insurance cards for every patient coming in.. The scanner is set to default settings and needs to be tweaked on color depth and double sided, etc.. Then after that, she needs to launch her Medical EMR application.. and then choose various options in the citrix client, ..TL;DR - Each user needs to spend 20 minutes resetting the defaults at this updated system. Well this is fine except, I am planning on updating 2 front desk systems at each clinic, the user Sally will need to do all these things EACH time she finds herself sitting down at a system I just swapped out the previous evening.My thought is this, put a single system down in one clinic and let it sit a week giving most of the float users a chance to work on it for a day, setting all of their preferences etc.Once I get a bunch of them with user profiles on the local drive, grab an image of that drive and just deploy that to each system I roll out..Couple issues I am running into:First would be that I would have to register each Windows 7 copy with a new serial, which I have The next issue is, we have a mis-mash of Dell optiplex systems. 330's - 380's even a couple 320's..
So, I have been searching mindlessly around to figure out how to swap my displays (IE. display 2 as display 1 and vise-versa) and I finally figured out in Catalyst control center, you can swap these displays, I currently have it configured in the control center like this: url...Is there any way to fix this? I restarted, and in Windows, it's still configured like that, but in the center, it's the way I want it. And I know it's not configured right because when I record my desktop with FRAPS, it records like it's configured the Windows way.
I have been getting a fairly random blue screens and I cannot pin point it myself. I know a bit about diagnosing and repairing issues but this one is just a pain in my butt. I am uploading the dump files and I hope someone can give me a hand I am running a sfc scan right now to test for any problems too. Also got this off the TSG SysInfo Program.
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit Processor: AMD Athlon(tm) II X3 445 Processor, AMD64 Family 16 Model 5 Stepping 3 Processor Count: 3 RAM: 8191 Mb Graphics Card: NVIDIA GeForce 9600 GT, 512 Mb Hard Drives: C: Total - 476837 MB, Free - 246483 MB; Motherboard: BIOSTAR Group, N68S3B Antivirus: Norton Security Suite, Updated and Enabled