So, I have been searching mindlessly around to figure out how to swap my displays (IE. display 2 as display 1 and vise-versa) and I finally figured out in Catalyst control center, you can swap these displays, I currently have it configured in the control center like this: url...Is there any way to fix this? I restarted, and in Windows, it's still configured like that, but in the center, it's the way I want it. And I know it's not configured right because when I record my desktop with FRAPS, it records like it's configured the Windows way.
I currently have it set to turn off my displays at 3 minutes of inactivity, and put the computer to sleep after 10 minutes.Sometimes, the displays won't turn off after 3 minutes, but it will then put the computer to sleep after 10 minutes while the displays are still on. More often, it will turn the displays off, but won't ever put the computer to sleep.Why wouldn't the computer go to sleep?Wouldn't any activity turn the displays back on? And so if they don't come back on, why wouldn't it go to sleep?why wouldn't the displays turn off, and then it goes to sleep?
I guess I need a way to copy my current C drive to a new drive so that the new drive can replace the C drive. Or perhaps there's some alternate way to replace the C drive with a newer and larger drive.I'm running Windows 7 Home Premium.
I have 2 HDDs that I want to switch the OS of each one to the other. One is a laptop 140GB HD that has Windows 7 64-bit and the other is a Desktop 150GB HD with Windows XP 32-bit. The laptops HD was pre-installed with the OS and the Desktop is unknown. Just as an fyi the laptops cd drive is broken and the desktops doesn't burn. What are my options on how to switch the two?
I was wondering if I could change my system from a 64bit to a 32bit...I have a OEM copy of windows wich I bought online and it is 64bit I want to change it to 32bit.
I have two laptops that are identical...HP Compaq nw9440. I have a 100gig drive in LAPTOP#1, and a 750gig drive in LAPTOP#2. Both drives are running an identical Windows 7 Enterprise typical install. Can I put the 750gig drive in to LAPTOP#1? Can I create and save an NTBTLOG.txt file from each laptop (I.E. ntbtlog-LP1.txt) and select either one during the boot-up? The reason is LAPTOP#2 is not running very well. It has been dropped and I fear the motherboard may have a crack in it causing random boot problems. Sometimes the laptop doesn't even recognize the hard drive.
how to configure Windows 7 use a Swap Partition instead of a Swap File. I heard it is possible to do so using special drivers. Another question is how much of a performance difference it actually would make over using a Swap File.
i have an odd 5900 RPM HDD that i need to swap out. i'm going to swap it out mainly because it's better suited for storage/backup rather than being my main HDD for usage/boot-up.
i don't want to reinstall Windows 7 (7100) and i want to copy everything from HDD "a" to HDD "b". any ideas/suggestions/comments?
I have a question which i am unable to solve yet hope any one help me out here what i want is Display 1, tv connected by HDMI and my Display 2 monitor to DVi, now main or primary display is my LCD monitor which is connected with DVI, what i want is to swap the numbers of display i want that my DVI should be identify as 1 not as 2 so how can i do it?
I installed a 2nd hard drive (presently drive B: ) it is initialized, volume prepared and ready to go. The plan is to clone Drive C: to it. Then making it the primarily C: drive. The old C: Drive will then be changed to Drive B.
Please can someone tell me the most reliable way to upgrade my hard drive.I have Norton Ghost 15Would like to transfer my system onto a new hard drive and then just boot from that new drive, removing and destroying the old one.
Can someone tell me the most reliable way to upgrade my hard drive.I have Norton Ghost 15,Would like to transfer my system onto a new hard drive and then just boot from that new drive, removing and destroying the old one.
I have been running happily with an All in One Medion desk top, which I have modified slightly. It is really a notebook chip based system, only two sata outputs, but it does have a touchscreen and digital tuner. It is a 2.3Ghz Pentium dual core. 4 GB mem and 1.5 TB over two drives.
I pulled the DVD drive out of sata 2 port and fitted it in an external housing on a USB port. Then I wired the sata 2 port out via an eSata socket to a sata HDD docking station.
I have been running six months with two versions of Win 7 Home premium 64bit in dual boot mode with no probs. Last week I decided to replace the 64 bit with a 32 bit version so as to run some older programs.
So I formatted the external 1TB drive and loaded win 7 32x from the original disks. Took while with all the updates and SP1.
While doing this, I had no problem with the DVD drive but, as soon as I was up and running, the DVD drive stopped reading disks. Swap boot back into Windows 7 64 bit and it is fine, boot from Windows 7 32 bit and it is a dodo. It recognises the drive ID but will not open a file or boot from a bootable disk. I have checked for out of date or missing drivers but nothing shows.
I suspect I have a protocol problem, Not sure. It appears to be using a new Windows 7 sp1 driver. Or maybe something wrong in Global settings.
I have two laptops (both Toshiba's, 4yrs and 2yrs old). Running Windows 7 Pro x64 on older one and Vista Home Prem x64 on newer one.
I want to get rid of older one (for obvious reasons), but don't want to purchase a new license for Windows 7. How can I swap the HDD's before ditching the antiquated unit?
My current motherboard is a socket 775 G41 chipset with 2 x DIMM slots for DDR2 RAM. I currently have 2 x 2GB Kingston RAM in them, but need to increase RAM to 8GB.However 2 x 4GB DDR2 is so ridiculously expensive it is not economically viable to do this.Around �175 for branded RAM or �100 for unbranded stuff that might be dodgy.So I am thinking of getting a motherboard that runs DDR3 RAM, then I can put in 8GB of cheaper DDR3 RAM and even with a new Mobo I am still better off, even using branded RAM.16GB would be nice but I don't think socket 775 mobos exist that support that much.I am keeping the same CPU (Core 2 Quad Q8300) and everything else.Running Windows 7 64 bit. My question is will I need to reinstall Windows? in fact I probably wouldn't bother if that was the case.
Can I swap out my old hard drive from my HP dv6 to a refurbished same model? The 1st one's MOBO burned up but Hard drive was not damaged. Want to be able to access the stored data. Hoping swapping the HDs would be the easy way
i bought a new laptop, an asus g75vw best buy model. i knew it had a slow hdd so i got a ssd while i was there. i searched online how to swap windows to the ssd and found what seemed like a good artilce on [URL] (link How To Migrate Windows 7 to a Solid State Drive - How-To Geek). so i did everything here, brought the os over, and the 200mb system partion thought i was ready to go so i removed the hdd and tried to boot, missing bootmgr. i replaced the hdd and left the ssd in, now windows will not boot with both drives installed, and i cant get it do boot from the recovery disk either. i am really at a loss here, i was hoping to just try to redo what i did to the ssd
I had an SSD that was 120 gig. I recently bought a larger 240 gig samsung SSD since I got a free copy of far cry 3 and my old SSD was nearly full.I used the program that came with the samsung drive to swap the data over.It had all the appropriate settings listed, and it seemed pretty straight forward. I attached the new SSD drive and had all the space on it listed as "unalocated" as the Samsung Wizard explained. I copied over the two partitions on the old drive over to the new Samsung. I then removed the old 120 gig drive and tried to boot with the new Samsung and the 1TB data drive that I had attached all along.I shut down, removed the 120 gig drive and moved the 240 over to the same sata cable that the 120 was on.When I tried to boot, it failed.A screen came up that offered to automatically repair the install, but it was unable.It looked like it would boot into this same error over and over. I used the boot manager thing on my mobo using the f8 key. I chose the Samsung SSD from the list and it offered up 3 choices.
1. Windows 7 premium 2. Windows 7 premium (recovered) 3. Windows 7 premium (recovered)
If I choose option 1, it repeats the same "unable to repair so lets reboot...."If I choose option 2, the computer boots normally, it looks exactly like before, and all is good. Till I reboot. I don't know where the 3 installs that its offers as options. I need a way to set it to always boot to the Windows 7 premium (recovered) install.
I wish to make possible of removing swap file from my ram disk before pc goes into hibernation. Is it possible to make this without system restart? How to stop system using swap file without restart?
I have a 250GB HD with WIN7 Home Premium installed, operating in a Lenovo R61e. Can I install that HD into my Toshiba Satellite L350? I have the WIN7 CD and codes.
I currently have Win 7 Ultimate 64-bit edition installed on my machine. (listed in my sig)
I am considering getting an x58/Core i7 920
Will i be able to just swap my hard drive from one motherboard to another or do you thing a fresh install is at hand?
In the past i have been able to swap hard drives from one gigabyte motherboard to another (both LGA 775) but i'm not sure if i will be able to do this from LGA 775 to LGA 1366.
I picked up a used computer that has vista. I have an extra hard drive with windows 7 on it. Is there something I need to do other than swapping out the hard drives? Replacing the vista hard drive with the windows 7 hard drive. When I did this, the pc will automatically run system repair. I get patch prevented the system from starting Windows 7 will not start on the pc, so is there something else I must do?
I have a Genius GPen 4500 USB graphics tablet (using the built-in Windows 7 driver), and would like to use it on my secondary monitor (which is 4:3, unlike my primary which is 16:9)However, windows seems to have decided that the tablet is integrated into my primary monitor (according to "Tablet PC Settings" in the control panel - it shows "Pen Input Avaliable" for the "1. BENQ E2220HD" item and "No Pen or Touch...." for the "2. SyncMaster" item)Running "Setup" from that window does not work, as the tablet still maps to the primary screen, and can't be used to click on the second screen.
What do with the the swap file on my SSD. It's a new OCZ Agility 3 with updated firmware. I also have an older Crucial SSD where I'd like to implement the same strategy.I'm debating putting my swap file on the HD to get it off the SSD but I'd like the hard drives to spin down when not in use. One box will be a media center PC that will be always on and having hard drives constantly spinning seems like overkill.If I put a swap file on the HD, will that drive ever go into sleep mode? I'm guessing no. Right now, I'm leaning towards small swap file on the SSDs say (512 to 2048). It'll also be easier to deal with if I ever decided to swap out or rearrange the HDS.
I just wanted some advice from people with first hand experience at upgrading motherboards without re-installing windows. I'm upgrading from my ASUS P8H61-M LE to Gigaabyte B75-D3V. Also means I can dual Sli my GPU.Anyway, I've read that you can just swap the mobo and boot in safe mode and windows 7 will change the drivers. I've also read to go into safe mode to remove the old drivers, reboot and run CCleaner then swap and boot into safe mode.
I bought window 7 home premium with Micro Center coupon. After I installed it on my main desktop, I got myself one more copy of Window 7 from digital river though my student account. I didn't know that these guy were giving away window7 professional for same price with home premium. Now I need to get professional install on my main desktop for XP mode and plan to upgrade my laptop with home premium I currently installed on my desktop.
I am just wondering if it could be possible to just swap the CD key to aviod reinstalling over my desktop. I talked to Microsoft tech and support said each key is tied to each DVD. So I can't just swap my Desktop key with digital river version and then install home premium in laptop.
In my first partition I have windows xp, and in the second partition windows 7.Is it safe to use only one swap / pagefile from only one partition (first one where resides windows xp)?My pagefile size is set to be in the first partition and at fixed size (minimum 4096 Mb maximum 4096 mb).Or should I make/move/user a swap file from the second partition (windows 7 partition). Far as I know from my benchmarks the hardisk is faster in the first partition (first 20 GB), that would be the xp partition, fast in the second one (from 20 to 50 gb) after this the speed is decreasing.I am using windows xp because Photoshop and some games seem's to be far more resposive and faster than in windows 7, and I use windows 7 for internet related & other stuff
I want to keep XP for compatibility reasons with some older hardware I still use often. I have XP installed on one hard drive and Windows 7 installed on another. When I installed Windows 7, I just went with the option for it to install a boot manager, and have been using that one ever since to dual boot my system. Nothing special, but it works.The current motherboard is an ASUS model, and has always had problems with the USB section (it took me quite a while to realize it was a motherboard problem, though). Then it began to develop problems reading the DVD drive several months after I installed it (back when it was only an XP system). Once again, not suspecting the motherboard, I replaced the DVD drive, thinking it had gone bad -- it hadn't, works fine in another system. And pretty soon thereafter the current drive began to work sporadically, and now doesn't work at all. Same as before.
This ASUS mb has a 3-year warranty, and it's not quite 2 years old. So, I should probably just suck it up and jump through the dozen or so hoops they toss in your path to get the mb repaired/replaced. Still, I'm guessing that if I'm successful, I may end up with a mb that is different enough from the one I have now where it's gonna break Windows 7 and XP.
I went through this when I originally replaced the motherboard, and ended up having to completely reinstall XP, reactivate it, and then d/l all the updates. I guess I'll be looking at having to do this now for both OSes, eh? If I have to reinstall both OSes, I'm thinking that I should install XP first, then Windows 7, mostly to preserve the dual-boot capabilty?
If I don't get satisfaction from ASUS, I'll probably just drop back 10 and punt, and go with a new mb. I'm gonna try to avoid this though because it's getting harder and harder to find mbs with PCI slots (I need three). I guess if I do this, it will probably amount to the same amount of work as if ASUS sends me a board that is substantially different from the old one.
just built a new i7-930 and installed Windows 7 Professional. With older versions of Windows I was told to put the swap file on another drive and to have the begining and ending sizes the same. Does this theory still hold true for W7? Looking for advice, I have 6GB of Ram on an Asus Rampage II Extreme MB.
