I have two laptops that are identical...HP Compaq nw9440. I have a 100gig drive in LAPTOP#1, and a 750gig drive in LAPTOP#2. Both drives are running an identical Windows 7 Enterprise typical install. Can I put the 750gig drive in to LAPTOP#1? Can I create and save an NTBTLOG.txt file from each laptop (I.E. ntbtlog-LP1.txt) and select either one during the boot-up? The reason is LAPTOP#2 is not running very well. It has been dropped and I fear the motherboard may have a crack in it causing random boot problems. Sometimes the laptop doesn't even recognize the hard drive.
I picked up a used computer that has vista. I have an extra hard drive with windows 7 on it. Is there something I need to do other than swapping out the hard drives? Replacing the vista hard drive with the windows 7 hard drive. When I did this, the pc will automatically run system repair. I get patch prevented the system from starting Windows 7 will not start on the pc, so is there something else I must do?
Please can someone tell me the most reliable way to upgrade my hard drive.I have Norton Ghost 15Would like to transfer my system onto a new hard drive and then just boot from that new drive, removing and destroying the old one.
Can someone tell me the most reliable way to upgrade my hard drive.I have Norton Ghost 15,Would like to transfer my system onto a new hard drive and then just boot from that new drive, removing and destroying the old one.
Can I swap out my old hard drive from my HP dv6 to a refurbished same model? The 1st one's MOBO burned up but Hard drive was not damaged. Want to be able to access the stored data. Hoping swapping the HDs would be the easy way
I currently have Win 7 Ultimate 64-bit edition installed on my machine. (listed in my sig)
I am considering getting an x58/Core i7 920
Will i be able to just swap my hard drive from one motherboard to another or do you thing a fresh install is at hand?
In the past i have been able to swap hard drives from one gigabyte motherboard to another (both LGA 775) but i'm not sure if i will be able to do this from LGA 775 to LGA 1366.
I currently have an HP Pavillion G70 that has some broken hardware (hinges for screen) but other wise works fine. It's running Windows 7, Ultimate - 32 bit.
I'd like to buy a used version of the same PC model and simply swap the hard drive from mine into the purchased PC.
Will this retain all the programs, settings and files? Or are there some things that are tied to the motherboard or other hardware devices.
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
i built me a gaming computer with windows 7, its up and running. I have a old Dell with Windows Xp that i have had for 5 years. I want to put that hard drive in my new computer. is this possible? will there be any conflicts? I want to make it so maybe in bios i can select witch OS to boot up. Or maybe it defaults to Win7 and i can switch to WinXp whenever i wanted.
I've recently purchased a PC with 1 64GB SSD and 1TB HD. Contrary to instructions the seller uploaded everything onto the SSD at C: and not just the OS. He now says I should use a disk partitioner to transfer the files. Also to reset my BIOS.
I currently have a dual boot of Windows Vista Ultimate on one hard drive and Windows 7 RC1 on the other and was planning on
upgrading to Windows 7 ultimate. I have could either upgrade my Vista hard drive which would be easy or I could upgrade the release candidate Windows 7 which is a fresh install on a new drive. Which should I put Windows 7 on?
After upgrading, I've found that I have 7 IDE hard drives ranging in size from 1 GB (!!!) to 200 GB. I'd like to get rid of them all. Is there a free reliable recylcing service out there. I've already wiped them clean (except for the 1 GB drive which won't spin up. It's from 1994).
This morning my pc started acting up for some unknown reason. After numberous attempts to fix it, I decided to restore from a restore point. It said it did restore but things got even worse.I then decided to restore an Maxium Reflect image I had made a couple weeks ago. When I made the image, the pc was working fine. The restoring of the image went normally.I have two strange things occurring.
1. I have two hard drives with 3 partitions on each drive. After about 10 minutes I can NOT see second hard drive in either windows explorer or Disk Managaer.
2. When the pc is first booted and a few minutes pass, I get what sounds like a radio station playing. It only lasts for about 20-30 seconds then goes off. It comes back randoms times. I have checked the processes that are running and nothing stands out that would cause this.I built this PC in 2009 and the combination of these identical hard drives (1 TB Sata) have always acted strange at times. Example the second hard drive would NOT always boot when windows booted. This was usually fixed by just rebooting.I have checked and all fans are working normally and inside the case is relatively clean.Is there any software that can be used to check hard drives???
I blow away a computer so I'm taking the Hard Drive out and putting it into another computer. From a AMD 3000 to a AMD 3800 and all it does in re-boot. I put in the XP CD and tried to do a repair but it didn't work or I didn't do it right.
I have a slight issue that I'm not sure how to fix. It's nothing serious but it's something I'd like to take care of.
Basically, I bought a new hard drive, made it the primary drive, and kept the old one in so I could transfer everything over to the new one and keep the old as my backup drive.
I installed Windows 7 but when I boot my machine without the disc in the drive it wont boot. I made my old drive the primary one again and I discovered that when I installed Windows 7 it put the boot information on the old hard drive instead of the new one.
Basically, I'm looking for an easy way to get it to boot from the new hard drive without having to use the old one as the primary. Any ideas?
I have a laptop that came with Windows 7 home premium and one hard drive. I purchased a second hard drive and installed. Is there anyway to set this up, even if it means wiping everything and reinstalling, so that both hard drives are seen as one C drive? My laptop does not have a RAID option in the BIOS. What about if it was Windows 7 professional?
As my hard disk, I have a 1TB Western Digital Caviar Black Edition.. it's 7200RPM, 32MB cache. Yet, WEI only gives it a score of 5.9. Everything else on my PC is a 7.0 or above.. any reason for that?
Any trick on how to get windows7 to keep seeing your slave drives?
I have tried un-sleeping, increased time to 999min. All drives have drive letters & are listed as active and healthy etc. Each have mix of ide but mostly sata drives. Windows have been updated.
I have a small office with 8 computers trying to run Windows 7 now. All fresh installs onto new sata drives @ 2 weeks now. (The old xp drives was just turned off awaiting reformat). Everyone is starting to have the same problem with drives that disappears. On some of the computers it happens as quickly as in 5 min, sometimes right as you moving one file on one drive over to another drive. Nothing but rebooting all day.
I have Win 7 desktop with 2 hard drives. One small SSD I use for work only and it only contains few work-related programs. The second larger HDD has a cloned bootable copy of SSD (in case of failure of SSD I would be able to continue working) but also has other non-work related stuff (pictures, videos, games....).
I was wondering how to set up the system so that I get a choice of which drive to boot from every time I turn on the system. That way I could choose which drive to access depending on whether I need to work or play.
I am installing windows 7. but the installation cd won't recognized the hard drives but my bios does. i went to the website and looked up drivers for the wd2500s but they don't have them. they said that they use the software in windows to work. so is there any way to get the drives to work? i have three set up on raid 0
I want to run chkdsk /r to check hard drive C but there are 2 hard drives D being the second one, which is intended for backing up. How do I know which hard drive I am check since there are 2.It was suggested to run chdsk /r from Tools but I cannot find it. Can anyone tell me where it is and how to use it?
I am using Windows 7, My desk top computers has three hard drives, the "C" with just the programmers and other system files, the other two hard drives (all SATA) are used with my main files (E & F) . Drives E & F are set as "Shared drives " I often update files between my Toshiba laptop (also using Windows7) and vice versa. I have a hard wired network connection between these two computers. Now my question why are so many temp files being added to my shared hard drives, I have only noticed this recently, I certainly did not get these when I had an XP Pro set-up, and between four computers. Is this problem associated with me allowing shared use between computers? I am also running office 2010 on both these computers. My emails are using outlook and IMAP, both computers emails systems are always synchronized, I think this is a feature of MS Office 2010, and is very helpful.
What happens if I delete these temp files? I am enclosing a copy of the temp files on my "e" drive so you can see.
