I blow away a computer so I'm taking the Hard Drive out and putting it into another computer. From a AMD 3000 to a AMD 3800 and all it does in re-boot. I put in the XP CD and tried to do a repair but it didn't work or I didn't do it right.
View 3 Replies
I have some questions about window 7. I want to switch two hard drives from a different computers; one mechanical and one ssd. The problem is they both have window 7 os 64 bit oem editions. Is there any legal way for me to accomplish this? And if a an alternate universe me does it regardless, what is the potential consequences it might face?
View 1 Replies View RelatedI have a machine that already has Windows 7 installed.I am buying a SSD to place my OS, and a few games on.How do I uninstall Windows 7 from my original drive (That has OS + Data on it), and install it on the SSD?Should the same disc work? Or would I have to go out and buy a completely new OS just because I have a new hard drive?
View 6 Replies View RelatedI have purchased a new PC with 64 bit Windows 7 OS. My old PC is a 32 bit Windows XP OS. I have a WD Passport 1tb external hard drive connected to the old PC that auto - backs up my files. I have already transfered files from my old PC to my new PC using a Windows Transfer Cable & software. Do I have to perform any changes to the External Hard Drive before I hook to the New Windows 7 PC? I am not sure if I should just hook the external hard drive to new PC and see what happens or what?
View 2 Replies View Relatedmake a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies View Relatedget windows 7 to switch audio drivers when you switch to another user account.
For eg.. normal speakers device for my personal account and then have my multichannel device (profire 2626) set as default for my other user account 4 studio work.
Atm, if i change it on one account it changes on the other account which is annoying and i'd just like to set default device for each account so i don't have to do this.
i built me a gaming computer with windows 7, its up and running. I have a old Dell with Windows Xp that i have had for 5 years. I want to put that hard drive in my new computer. is this possible? will there be any conflicts? I want to make it so maybe in bios i can select witch OS to boot up. Or maybe it defaults to Win7 and i can switch to WinXp whenever i wanted.
View 5 Replies View RelatedI've recently purchased a PC with 1 64GB SSD and 1TB HD. Contrary to instructions the seller uploaded everything onto the SSD at C: and not just the OS. He now says I should use a disk partitioner to transfer the files. Also to reset my BIOS.
View 5 Replies View RelatedI currently have a dual boot of Windows Vista Ultimate on one hard drive and Windows 7 RC1 on the other and was planning on
upgrading to Windows 7 ultimate. I have could either upgrade my Vista hard drive which would be easy or I could upgrade the release candidate Windows 7 which is a fresh install on a new drive. Which should I put Windows 7 on?
If I Format my Hard drives ,do I lose all my systems ,Like Windows???
View 4 Replies View RelatedI have two laptops that are identical...HP Compaq nw9440. I have a 100gig drive in LAPTOP#1, and a 750gig drive in LAPTOP#2. Both drives are running an identical Windows 7 Enterprise typical install. Can I put the 750gig drive in to LAPTOP#1? Can I create and save an NTBTLOG.txt file from each laptop (I.E. ntbtlog-LP1.txt) and select either one during the boot-up? The reason is LAPTOP#2 is not running very well. It has been dropped and I fear the motherboard may have a crack in it causing random boot problems. Sometimes the laptop doesn't even recognize the hard drive.
View 2 Replies View Related64installed on c, win 7 later installed an d. dual boot has been working perfectly until
something caused the drives to switch. now win 7 starts ok but looks for all it's files on c, which is locked.
vista starts up fine, and sees all it's files on c as it should.
my windows 7 repair disk, created at start of win 7, does not correct problem, nor does system restore.
After upgrading, I've found that I have 7 IDE hard drives ranging in size from 1 GB (!!!) to 200 GB. I'd like to get rid of them all. Is there a free reliable recylcing service out there. I've already wiped them clean (except for the 1 GB drive which won't spin up. It's from 1994).
View 7 Replies View RelatedJust added this to my computer Safely Remove Hardware Shortcut - Create
and when I try and eject using the right click on the desktop I get
Problem Ejecting XXXXXx USB Device
The 'XXXXXXXXX' device is not removable and cannot be ejected or unplugged
This is when I try any combination of clicking stop on the drive name and drive letter in the window.
I can only run one at a time instead of two. I would like to copy my 1.5tb over to my 2tb so I have a back up.
My laptop only holds 200GB of remaining data so I can't use that hard drive or I would.
This morning my pc started acting up for some unknown reason. After numberous attempts to fix it, I decided to restore from a restore point. It said it did restore but things got even worse.I then decided to restore an Maxium Reflect image I had made a couple weeks ago. When I made the image, the pc was working fine. The restoring of the image went normally.I have two strange things occurring.
1. I have two hard drives with 3 partitions on each drive. After about 10 minutes I can NOT see second hard drive in either windows explorer or Disk Managaer.
2. When the pc is first booted and a few minutes pass, I get what sounds like a radio station playing. It only lasts for about 20-30 seconds then goes off. It comes back randoms times. I have checked the processes that are running and nothing stands out that would cause this.I built this PC in 2009 and the combination of these identical hard drives (1 TB Sata) have always acted strange at times. Example the second hard drive would NOT always boot when windows booted. This was usually fixed by just rebooting.I have checked and all fans are working normally and inside the case is relatively clean.Is there any software that can be used to check hard drives???
I have a slight issue that I'm not sure how to fix. It's nothing serious but it's something I'd like to take care of.
Basically, I bought a new hard drive, made it the primary drive, and kept the old one in so I could transfer everything over to the new one and keep the old as my backup drive.
I installed Windows 7 but when I boot my machine without the disc in the drive it wont boot. I made my old drive the primary one again and I discovered that when I installed Windows 7 it put the boot information on the old hard drive instead of the new one.
Basically, I'm looking for an easy way to get it to boot from the new hard drive without having to use the old one as the primary. Any ideas?
I have a laptop that came with Windows 7 home premium and one hard drive. I purchased a second hard drive and installed. Is there anyway to set this up, even if it means wiping everything and reinstalling, so that both hard drives are seen as one C drive? My laptop does not have a RAID option in the BIOS. What about if it was Windows 7 professional?
View 9 Replies View RelatedIf you think that switching to the high performance power plan is enough to set your computer to the best plan, well, it isnt.
Heres how to set your hard drives so they are included in the high performance:
1. open control panel
2. type power in the search bar and click "change power-saving settings"
3. to the right of the plan name click "change plan settings"
4. Click "change advanced power settings"
5. Go to the hard disk section and then "turn off hard disk after"
6. Enter 0 (zero) in the box (this will change to never)
Doing this prevents your disks from being "turned off".
As my hard disk, I have a 1TB Western Digital Caviar Black Edition.. it's 7200RPM, 32MB cache. Yet, WEI only gives it a score of 5.9. Everything else on my PC is a 7.0 or above.. any reason for that?
View 9 Replies View RelatedCan I install software/programs onto my external Hard drive and run them through my laptop as normal?
I have lots and lots of adobe products and heaps of music and movie editing software. I dont use them everyday but play around often.
i can't see the hard drives in my computer
View 5 Replies View Relatedwhy does Toshiba have a C AND D hard drives. Other computers I have had only have 1 C hard drive
View 2 Replies View RelatedCan we install same OS in different hard drives?
View 2 Replies View RelatedAny trick on how to get windows7 to keep seeing your slave drives?
I have tried un-sleeping, increased time to 999min. All drives have drive letters & are listed as active and healthy etc. Each have mix of ide but mostly sata drives. Windows have been updated.
I have a small office with 8 computers trying to run Windows 7 now. All fresh installs onto new sata drives @ 2 weeks now. (The old xp drives was just turned off awaiting reformat). Everyone is starting to have the same problem with drives that disappears. On some of the computers it happens as quickly as in 5 min, sometimes right as you moving one file on one drive over to another drive. Nothing but rebooting all day.
Any clues?
I have Win 7 desktop with 2 hard drives. One small SSD I use for work only and it only contains few work-related programs. The second larger HDD has a cloned bootable copy of SSD (in case of failure of SSD I would be able to continue working) but also has other non-work related stuff (pictures, videos, games....).
I was wondering how to set up the system so that I get a choice of which drive to boot from every time I turn on the system. That way I could choose which drive to access depending on whether I need to work or play.
I am installing windows 7. but the installation cd won't recognized the hard drives but my bios does. i went to the website and looked up drivers for the wd2500s but they don't have them. they said that they use the software in windows to work. so is there any way to get the drives to work? i have three set up on raid 0
View 5 Replies View RelatedI want to run chkdsk /r to check hard drive C but there are 2 hard drives D being the second one, which is intended for backing up. How do I know which hard drive I am check since there are 2.It was suggested to run chdsk /r from Tools but I cannot find it. Can anyone tell me where it is and how to use it?
View 14 Replies View RelatedI am using Windows 7, My desk top computers has three hard drives, the "C" with just the programmers and other system files, the other two hard drives (all SATA) are used with my main files (E & F) . Drives E & F are set as "Shared drives " I often update files between my Toshiba laptop (also using Windows7) and vice versa. I have a hard wired network connection between these two computers. Now my question why are so many temp files being added to my shared hard drives, I have only noticed this recently, I certainly did not get these when I had an XP Pro set-up, and between four computers. Is this problem associated with me allowing shared use between computers? I am also running office 2010 on both these computers. My emails are using outlook and IMAP, both computers emails systems are always synchronized, I think this is a feature of MS Office 2010, and is very helpful.
What happens if I delete these temp files? I am enclosing a copy of the temp files on my "e" drive so you can see.
I just installed Windows 7 build 7068. 64bit.I have an Asus P5WD2E-Premium mobo, and 5 Western Digital Hard drives of various sizes, all SATA.Windows recognizes only 2 of the drives, the c drive of course, and only 1 of two WD 400gig hds, which are identical.I know this may be a mobo issue, but, wasn't sure about Windows 7.
View 9 Replies View RelatedRecently, my ancient desktop died on me. I had some stuff stored on the main C drive (40 GB) and some on an external 1 TB drive. I put the 40 GB HD in the external module to upload it to a laptop with a 360 GB HD. I would then like to transfer that 40 GB to the 1 TB drive. When I plug in the external with the 40 GB, it appears that the Windows 7 machine does not read it or pick it up. It recognizes it as an external device, but not as a drive.
View 14 Replies View Related
