Trouble Booting Automatically After SSD Swap-over
Dec 14, 2012
I had an SSD that was 120 gig. I recently bought a larger 240 gig samsung SSD since I got a free copy of far cry 3 and my old SSD was nearly full.I used the program that came with the samsung drive to swap the data over.It had all the appropriate settings listed, and it seemed pretty straight forward. I attached the new SSD drive and had all the space on it listed as "unalocated" as the Samsung Wizard explained. I copied over the two partitions on the old drive over to the new Samsung. I then removed the old 120 gig drive and tried to boot with the new Samsung and the 1TB data drive that I had attached all along.I shut down, removed the 120 gig drive and moved the 240 over to the same sata cable that the 120 was on.When I tried to boot, it failed.A screen came up that offered to automatically repair the install, but it was unable.It looked like it would boot into this same error over and over. I used the boot manager thing on my mobo using the f8 key. I chose the Samsung SSD from the list and it offered up 3 choices.
1. Windows 7 premium
2. Windows 7 premium (recovered)
3. Windows 7 premium (recovered)
If I choose option 1, it repeats the same "unable to repair so lets reboot...."If I choose option 2, the computer boots normally, it looks exactly like before, and all is good. Till I reboot. I don't know where the 3 installs that its offers as options. I need a way to set it to always boot to the Windows 7 premium (recovered) install.
View 3 Replies
ADVERTISEMENT
Nov 7, 2011
I have Ubuntu dual booting on Windows 7. After the bios load, is there anyway that I can make Windows 7 boot right away without selecting anything on the OS selection? The same way it would boot without dual boot...if that makes any sense.If the above exists: Let's say I use Windows 7 all the time, but one day I decide to boot into Ubuntu. Is there a way that I can press a button, before Windows 7 loads, to make the OS selection come up?I tried to make myself as clear as possible and I hope that you understand what I'm trying to say.
View 9 Replies
View Related
May 10, 2012
I have loaded XP on my other pc like 3 times. The first time it lasted a while then started getting blue screens. Reloaded again, same thing. I recently tried again, but this time the system went to blue screen 3 days later. I did notice that after the last MS windows update was finished, it wanted a restart, then after the restart, it would never boot to the OS.
The pc just starts up and goes to the windows boot/splash screen and just keeps repeating itself. I am not sure what to do at this point. Could this be a sign of a bad HDD, or cd-rom drive, maybe the mo-bo?
Would be greatly appreciated if someone could help me with this problem! I do apologize if I should have posted this elsewhere, but am just desperate to get this pc running proper!
View 9 Replies
View Related
May 1, 2009
I want to delete my HP C: partition which has Vista installed on it, i have Windows 7 build 7100 installed on the Windows 7 A: partition.
I want to delete the C: partition and extend A: over it.
The system will not allow me to delete the C: partition, how do i do it?
View 5 Replies
View Related
May 26, 2012
havng serious trouble with my DirectX 9.See from a few days ago...my games (which used to work and look perfect) started showing weird black triangular gaps/shapes on the screen and on character models and on environments.at frst i thot it was a problem wd my Gfx card (Radeon HD 4350) ...so i updated the software of amd radeon from net.but the prblem stil persisted.Now recently...as i was playing AVATAR (which was shwng the abovementioned gfx problems)..i swtched from directX 9 to DirectX 10 ...from a option given in the main menu..and the gfx prblem was sorted beautifully.Now the problem is my other games are still showing the problem...i cant find out how to change the directX for those games
View 4 Replies
View Related
Sep 28, 2011
Should i put the swap on the HDD ? I have 1 SSD OCZ Vertex 2 and 2 x HDD WD 6400 AAKS.
PS I have 3 GBDDR3
View 6 Replies
View Related
Apr 17, 2011
I have installed 7 sp1 on Dell inspiron 1520. and updated my drivers also with driver genius.I have a problem that such programs won t install. some others have trouble , f.e firefox 4 craches some times.I have never had such problems in xp.for example this is the error that on office 2010 occures while installing :or net framework 4 gives the eror :
View 5 Replies
View Related
Jul 24, 2011
For a couple of weeks now, I've had these windows updates that wouldn't finish installing. I've been trying the recommended solutions that I could find but nothing really helps.
I've tried repairing the Microsoft .NET framework but it fails to repair for some unknown reason.
I've uninstalled and reinstalled it both manually and through windows updater, both failed.
View 14 Replies
View Related
Jan 29, 2013
So I recently built my first computer, and I was so excited it was going great, I installed all my drivers, and downloaded some of the software, steam, itunes etc. Anyway I will try to break this down to make this easier to follow,I stepped away while it was downloading LoL ,-I came back to see a screen saying Windows could not repair this computer automatically ,I performed some of the options, reverting to an earlier state, and even using the repair tool on windows itself,I then attempted to reinstall windows entirely, and I would just move some key files over from the Windows.old file,Instead my computer asked me to select which windows I wanted to run, after trying them both neither worked,-after surfing the internet, so I used the command prompt to clear my hard drive, I had figured I would just have to reinstall a few drivers and download some stuff no big deal,but instead my computer still prompts me to select one of two windows to run, again neither working,now installing off of the disk doesn't even finish
View 8 Replies
View Related
Dec 1, 2009
I set as the default my printer (HP1320). It unsets itself and I have to set it again every couple of days. I'm using the updated driver from HP
View 2 Replies
View Related
Jan 21, 2009
If your having an issue installing programs where you get the error, "windows installer has stopped working", go into your action center (the flag icon in the lower right corner of your task bar), click "change action center settings", then click "customer experience improvement program settings". Once in the settings, select "No, I do not wish to participate" and save your settings.
View 1 Replies
View Related
Aug 21, 2009
I'm having a strange problem with my mouse. This is the first wireless mouse I have ever used. At first I thought is was my mouse that was acting up. Now I am pretty sure it is my USB ports in the rear of the computer.
My problem is my mouse pointer stops moving constantly. It resembles a trashy ball mouse the way it stops moving with the exception that my pointer suddenly catches up with where it needs to be. During all this time I was considering the possibilities that it could be my mouse or a glitch in windows 7 build 7229.
A few nights ago for the first time my mouse quit responding. I was forced to check it out and try a different port. Non of the rear ports seem to work so I tried a front port. I did not have any trouble with the mouse on the front port. After a few hours I tried a different rear port and after a while the same thing started again. Now for the second time switching back to the front port without any problems.
I am curious if anyone else has had this problem. What do you think it could be?I realize this could be fixed in the Retail versions of Windows 7?
Maybe a driver update is needed.
Does this sound like a problem with the USB chip?
Could there be interference with my wireless network adapter?
I'm not really sure where to start diagnostics. I don't really want to pull my adapter if I can get out of it. What do you guys think?
View 9 Replies
View Related
Feb 22, 2011
I guess I need a way to copy my current C drive to a new drive so that the new drive can replace the C drive. Or perhaps there's some alternate way to replace the C drive with a newer and larger drive.I'm running Windows 7 Home Premium.
View 3 Replies
View Related
Jan 29, 2012
So, I have been searching mindlessly around to figure out how to swap my displays (IE. display 2 as display 1 and vise-versa) and I finally figured out in Catalyst control center, you can swap these displays, I currently have it configured in the control center like this: url...Is there any way to fix this? I restarted, and in Windows, it's still configured like that, but in the center, it's the way I want it. And I know it's not configured right because when I record my desktop with FRAPS, it records like it's configured the Windows way.
View 1 Replies
View Related
Aug 16, 2012
I have 2 HDDs that I want to switch the OS of each one to the other. One is a laptop 140GB HD that has Windows 7 64-bit and the other is a Desktop 150GB HD with Windows XP 32-bit. The laptops HD was pre-installed with the OS and the Desktop is unknown. Just as an fyi the laptops cd drive is broken and the desktops doesn't burn. What are my options on how to switch the two?
View 1 Replies
View Related
Jun 21, 2012
I was wondering if I could change my system from a 64bit to a 32bit...I have a OEM copy of windows wich I bought online and it is 64bit I want to change it to 32bit.
View 6 Replies
View Related
Feb 11, 2012
Sometimes when I try to click on a link, or if I save a link to my desktop, I get an error code when I try to access it that says "there was a problem sending the command to the program". The problem started after I suffered a system failure when installing Norton Internet security.
I have a Dell XPS 600 Desktop, 150 GB, 8 megs
View 3 Replies
View Related
Jun 18, 2009
I can't find a driver for this card. Im testing how fast Win 7 would be on an old rig, but can't get the required drivers for this.
I tried the vista drivers for this card, 96.85 i think, but doesn't work, system restarts, screen goes black, no signal etc.
Any ideas, help?
View 7 Replies
View Related
Aug 21, 2009
I have a Canon 3200F scanner which I can't get working on 7 RC 32-bit.
I have downloaded the driver from Canon, installed it and nothing really happened. I then discovered that I needed to install a WIA driver, which I downloaded. But when I try to install it 7 says it may not have installed properly.
The scanner now shows up on the import list under Photoshop CS4, but when I select it to import it then stalls for a short time then tells me it can't connect, and to check the leads etc.
Anyone got any ideas.
View 2 Replies
View Related
Mar 29, 2009
I just installed the latest Nvidia driver for Windows 7. I restarted and now have a black screen with the watermark in the lower right corner and a mouse pointer. How do I even roll back the driver? Should I hard shut down and try again?
Forgot about trying in safe mode...hope that does it.
Roll back in safe mode did it but I would be careful using these drivers for x64 Win 7. They say that's what they're for.
Edit more info: If you're looking at this...don't try to uninstall the driver that didn't work form "programs and features". It took ALL display drivers off my system and I went through hell again trying to get any display driver to work.
View 1 Replies
View Related
Aug 5, 2012
First start with explaining that I'm new to the forum and to some of the more in depth setup processes. I am currently trying to re-partition my hard drive in order to setup a dual boot. I have just installed windows 7 on the computer, not carrying over anything from the old OS.When I open computer management, it states that of the total 76,000 MB's of the single existing partition, only 1,413 MB's is available to be shrunk by.This is an insufficient amount for the second partition I require for the dual boot.Additionally, when I take a different approach and try to re partition from with in the OS that I am trying to dual boot with, it gives me a warning that the program (gparted) detected that the disk has at least 51 bad sectors when I unmount it.
View 5 Replies
View Related
May 29, 2009
I have an external Toshiba cable modem -USB - attached to my computer for Internet access and I am using the Windows 7 Ultimate OS. I then have a Vista Ultimate 64 bit machine connected to a Wired Router. The Vista Machine can access the Windows 7 machine through this network but not the internet. In the Windows 7 Network dialog box it shows the External modem as a Home Network but it shows the Vista machine's ethernet card as a Public Network and it will not let me change this setting at all.
View 6 Replies
View Related
Dec 23, 2009
I am having a problem similar to what somebody else has posted here in the past. I have Windows XP Home on my Desktop and Windows 7 on the laptop. I have them both networked. I am able to view shared Desktop folders from the Windows 7 laptop with no problems, but when I try to view the shared laptop folders from the XP Desktop, it keeps telling me to type in a username and password. On the Windows 7 laptop, I have it set in the Network and Sharing Center to not require a password.
I originally had it set up as a homegroup, then changed it to a workgroup on the laptop, but the same thing happens. I also changed the Computer Name on the laptop, but I still have to type in a username and password on the XP Desktop. Once I enter the username and password, I can freely access the laptop. But once I restart either machine, however, I then have to type the username and password on the Desktop again.
Can anybody assist me with this matter?
View 4 Replies
View Related
Dec 28, 2008
anyone no why this build is using so much memory?
i have 4gb and it seems to be using 97% of it with
nothing else installed but the os and drivers.
i tried installing avast! Antivirus but after the
reboot the system moves so slow i had to uninstall
it.didn't have no trouble with the last 3 builds.
View 7 Replies
View Related
Nov 10, 2009
I just got my new laptop, which has Windows 7. I tried to use my microsoft wireless laser mouse 5000 but when I try an install the 64 bit vista driver, it claims compatibility issues. How do you i get around this? I need this mouse.
View 3 Replies
View Related
Dec 6, 2009
Well the heading of this thread interested me a lot, but my problem is somewhat different. I had a hell of a time installing Win7. Had to borrow a friends Geforce to finish installation since my ATI card (and I read in many places that the ATI drivers bundled with the win7 installation can cause trouble with HD4850). The installation would go to the final setup screen then BSOD every time.
Plugged in the Geforce and voila, I entered windows. I then switched back to the HD4850 and updated the drivers in safe mode. However, the stability was short-lived and I got recurring Power-Kernel critical errors (0x124). So after a week of complete instability and replacing every single driver I could think of, I gave up and went back to XP.
NOW the trouble started. I'm getting random resets and powerouts when running the same WinXP installation I had used before with no problems at all. I would think that a PSU either goes or doesn't, but is it possible that something has reduced its voltage output?
I'm pretty worked up about all this, since my computer was 100% stable before I tried Win7, now I can't even revert to XP. I can get into the OS for a few minutes, not even enough time to install chipset drivers. Safe mode just BSODs.
View 9 Replies
View Related
Jun 3, 2011
I have two laptops that are identical...HP Compaq nw9440. I have a 100gig drive in LAPTOP#1, and a 750gig drive in LAPTOP#2. Both drives are running an identical Windows 7 Enterprise typical install. Can I put the 750gig drive in to LAPTOP#1? Can I create and save an NTBTLOG.txt file from each laptop (I.E. ntbtlog-LP1.txt) and select either one during the boot-up? The reason is LAPTOP#2 is not running very well. It has been dropped and I fear the motherboard may have a crack in it causing random boot problems. Sometimes the laptop doesn't even recognize the hard drive.
View 2 Replies
View Related
Nov 23, 2011
how to configure Windows 7 use a Swap Partition instead of a Swap File. I heard it is possible to do so using special drivers. Another question is how much of a performance difference it actually would make over using a Swap File.
View 2 Replies
View Related
Aug 21, 2009
i have an odd 5900 RPM HDD that i need to swap out. i'm going to swap it out mainly because it's better suited for storage/backup rather than being my main HDD for usage/boot-up.
i don't want to reinstall Windows 7 (7100) and i want to copy everything from HDD "a" to HDD "b". any ideas/suggestions/comments?
View 7 Replies
View Related
Jun 19, 2012
I have a question which i am unable to solve yet hope any one help me out here
what i want is Display 1, tv connected by HDMI and my Display 2 monitor to DVi, now main or primary display is my LCD monitor which is connected with DVI, what i want is to swap the numbers of display i want that my DVI should be identify as 1 not as 2 so how can i do it?
View 3 Replies
View Related
Apr 5, 2011
Is it possible to swap drive letters around? I want to swap the C: drive to be the F: drive, is this possible?
View 4 Replies
View Related