Working With Multiple Monitors Does Not Allow Multiple Desktops
Sep 7, 2012
I have attached a second monitor to my laptop which runs Windows 7, however, I need to set different resolutions for different monitors, because the display does not fit to fill the screen on both monitors.
It is also noted that the display is replicated, and I would like to have the effect of having different desktops e.g. being able to use different applications such as debugging code on one monitor on an IDE such as Visual Studio, and, viewing the browser on the other monitor.
Currently it does not seem possible since the behavior seems to be that the same resolution is replicated on both monitors.
View 2 Replies
ADVERTISEMENT
Jul 20, 2011
I'm looking for a software that lets you split a single monitor into 4 or more desktops.
Does anyone know any free software that does this?
View 5 Replies
View Related
Apr 19, 2012
I would like to setup 2 monitors on my computer. I know my computer is older but it is very fast and I don't plan on using the monitors on resource hogging stuff
My specs are:
Intel pentium 4 3ghz HT ENABLED
4gb ram
1tb hdd
Nvidia gt 520 1gb
windows 7
My monitors are 2 different inputs / outputs
If I just plugged them both in to the plugin on my gpu would it work and have to adjust stuff? I have never used dual monitors so I don't know. One monitor has a 1600x900 (I plan on this being main monitor)
Other is 1024x768. One of them is dvi and other is vga.
View 9 Replies
View Related
Jul 9, 2009
I have a new machine that I have installed Windows 7 64bit (build 7100) and am having issues with the system detecting and selecting as my primary display monitors that dont exist.
I am running 2 Gigabyte GTX275s in SLI and have a Samsung 2443BW LCD via a single DVI cable. Nothing is plugged into the other connectors.
I wouldn't usually care if there were other disconnected displays being detected but my problem is it seems to randomly detect a range of monitors at each startup and pick one to be the primary display leaving my monitor blank. The screen will flash 3 or 4 times making the windows sound when you connect new hardware.
I have tried another monitor and get the same result. It is quite frustrating when you have to reboot the system often 3 times before you can get a desktop (an extended one still) so you can get to the display properties and make corrections that dont seem to last after a reboot. I have tried both the 186.18 and 190.15 Nvidia drivers.
Sometimes even into either the change the screen resolution or nvidia control panel will sometimes cause it to refresh all the monitors it detects and i can be left with a blank screen.
I hope I have given enough detail for someone to be able to assist.
View 9 Replies
View Related
May 22, 2012
I do currency trading from my home, and need to have a full screen dedicated to each currency I trade, each screen/currency running off the same PC at the same time. I know I can attach multiple monitors to my Windows 7 PC, but am not sure how to have the same program running simultaneously on 3 different monitors (that's the only way to get the 3 currencies to show as a full screen and have the ability to submit trade tickets independently based on respective currency). Seems as though the same image will appear on each monitor.Is this at all possible, or will I have to buy 2 additional PCs to put Monitors 2 and 3 on to accomplish this?
View 2 Replies
View Related
Sep 27, 2012
So I recently found my copy of Battle for Middle Earth 2, and decided to give it a whirl for nostalgia's sake. Only, the moment I get into a game, I'm met with a glaring issue - I cannot scroll across the map in one direction, because my mouse simply moves onto the other monitor.
So, what I have tried, is fiddling with the resolution settings on the game itself - no change. I don't have the option to run it in a window, or move it to my other monitor to see if it persists there. how I might be able to fix this, short of just disabling the other monitor during gameplay?
View 1 Replies
View Related
Dec 30, 2009
It seems like a few programs, such as Adobe Photoshop CS4 and Adobe Dreamweaver CS4 (seems to be limited to Adobe), expand past my main monitor, and reach the monitors to the left and right.
This happens when the programs are maximized.
I've included two screenshots of this issue. Notice the additional black border around the main screen (middle one).
View 1 Replies
View Related
Jun 28, 2012
whenever I restart my computer, all my desktop icons move around to really weird locations.Here are the specs:
Asus G74SX built-in monitor: 1920x1080
External monitor: Acer X203H, 1600x900
Graphics card: NVIDIA GeForce GTX 560M 3GB VRAM
View 1 Replies
View Related
Jan 1, 2013
How to extend dvi output to multiple hdmi monitors? Have Samsung Series 7 Slate tablet computer running Windows 7 Ultimate 64-bit. Nature of computer prevents swapping out graphics card/module.
View 2 Replies
View Related
Oct 6, 2009
Just installed Windows 7. and everytime i start up a game (like left 4 dead)
all screens go black(like when they do when you set a other resolution) and back to normal resolution. when game resolution isn't different from the desktop resolution. and cause i ussually have a series running on one of my other monitors i can't see them cause well desktop thinks it not on its desktop resolution(or for what ever other reason it is that video won't show on second monitor if there is a game up on your main monitor that is not on ur normal desktop resolution).
this doesn't happen with every game though and can't really figure it out. if u need any info, or have no idea what i'm talking about(don't really know how to explain this very wel) post for more details.
View 3 Replies
View Related
Nov 14, 2009
3 Viewsonic 22" monitors and one Dell 24 inch monitor all running DVI cables.
I have three of the video cards in the computer to run multiple monitors. Windows 7 has a feature where when you plug in a monitor, it auto detects it and then enables it and sets its proper screen resolution. The problem is that when I plug in more than one monitor, I get inconsistent results.
Here are some examples:
Example 1 that happens: I have two monitors plugged in and I plug in a third monitor. It enables it within Windows 7, but the monitor does not actually turn on. If I restart the computer, somtimes it will stay enabled and boot up with all three monitors on.
sometimes when I reboot it, it again shows all three enabled but only two are actually on. This happens also when I plug a fourth or fifth monitor on. Sometimes two or three monitors will be on whereas one or two others will not be on but will show enabled in display properties.
Example 2 that happens: Sometimes when I plug in a second, third, or fouth monitor, it will actually show an additional monitor as disabled. For example, if I have three monitors plugged in and it shows three monitors enabled (regardless if all three are on and working), and I plug a fourth monitor in, then it enables the fourth monitor, sometimes it turns on, sometimes it doesnt, and it also shows a "generic non-pnp monitor" as number FIVE.
Even though only four displays are plugged in. I've seen this happen even if I plug in a third monitor (shows four, with 3 or number 4 disabled). If I try to enable that FIFTH "ghost" monitor, and click apply, it says "cannot save settings." You can see an example of this as an attachment.
When I plugged in another monitor, it shrunk 2 and there is also a 5 the same size but disabled. Strangely enough, the 2 says the pnp monitor and 5 says the model number of the monitor. However, enabling 5 does not actually enable it and says that it cannot save settings.
I have tried downloading the latest drivers from ATI 9-10 as well as Catalyst Control Center as well as Hydravision from ATI and also Ultramon multiple monitor software. I have tried deleting the ATI 3600 drivers WDDM 1.0 (maybe 1.1) from device manager, only to reboot and then it installed the drivers, reboot again and it brings back all of the whacky settings.
I have a couple of times got all four monitors enabled and all four monitors on where the cursor moves across them properly. EXACTLY what I want to have happen. If I restart it almost always comes back on as EXAMPLE 1 where only two of the four monitors will turn on, but it shows them enabled in display properties, or if all four monitors do come back on, they are not in the same order that I had them in and it actually shows FIVE in display properties.
To make this all even stranger, believe it or not, i've even had it boot and one of the monitors is BLACK & WHITE. What is so strange about this is that the Windows 7 logo when booting, the color Windows 7 logo, is indeed COLOR on that screen, but once it is actually in Windows 7, it is BLACK & WHITE.
If I do a restart, it sometimes comes back in full color. What this means is that there is color while Windows is loading, and then once in Windows one of the monitors is BLACK & WHITE throwing out the possibility of a bad video card.
Has anyone else experienced anything like this? Is there KNOWN issues with Windows 7 and ATI video cards or drivers? How about Windows 7 and Viewsonic or Dell monitors? This is extremely frustrating and looking for some guidance on the subject matter. I believe that the drivers, whether Windows WDDM default or ATI's are simply not correct with Windows 7. I never had this problem with Windows XP.
PLEASE See "win7_monitors.jpg" file to see what I am talking about concerning EXAMPLE 2.
Edit: I need to add that on example 1, where it shows enabled but the monitor does not come on, I have noticed that about 50% of the time when I put the Windows 7 into SLEEP mode, and take it out, the monitor(s) that were off are now on.
View 6 Replies
View Related
Nov 13, 2011
I am trying to get my wife's new computer up and running without any BSOD or program failures. Note that the system was not initially set up to capture the dmp files so all the earliest ones are missing. I presented the initial problems to the original seller who recommended sticking with MSE and uninstalling Norton 360 and I did that. Another forum suggested that Virtual Memory was the problem and I disabled and restored VM. Still having multiple crashes and I am hoping that I can get real help here. I do note that all the crashes have ntoskrnl.exe in the driver stack although sometimes alone and sometimes with other drivers.[CODE]
View 2 Replies
View Related
Feb 13, 2013
We have three medical clinics and the front desk staff float from clinic to clinic depending on their schedule. I only started here a few months ago and I am working on upgrading their Dell xp systems to Windows 7 systems.The problem begins to crop up when say a user named Sally will come in and sit down at this system for the first time.. Well, she needs to login, click on outlook icon, let it find her exchange PST and copy settings to her user profile, then she launches the application for the scanner that she uses to scan in ID's and insurance cards for every patient coming in.. The scanner is set to default settings and needs to be tweaked on color depth and double sided, etc.. Then after that, she needs to launch her Medical EMR application.. and then choose various options in the citrix client, ..TL;DR - Each user needs to spend 20 minutes resetting the defaults at this updated system.
Well this is fine except, I am planning on updating 2 front desk systems at each clinic, the user Sally will need to do all these things EACH time she finds herself sitting down at a system I just swapped out the previous evening.My thought is this, put a single system down in one clinic and let it sit a week giving most of the float users a chance to work on it for a day, setting all of their preferences etc.Once I get a bunch of them with user profiles on the local drive, grab an image of that drive and just deploy that to each system I roll out..Couple issues I am running into:First would be that I would have to register each Windows 7 copy with a new serial, which I have The next issue is, we have a mis-mash of Dell optiplex systems. 330's - 380's even a couple 320's..
View 2 Replies
View Related
Dec 13, 2012
I have been getting a fairly random blue screens and I cannot pin point it myself. I know a bit about diagnosing and repairing issues but this one is just a pain in my butt. I am uploading the dump files and I hope someone can give me a hand I am running a sfc scan right now to test for any problems too. Also got this off the TSG SysInfo Program.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X3 445 Processor, AMD64 Family 16 Model 5 Stepping 3
Processor Count: 3
RAM: 8191 Mb
Graphics Card: NVIDIA GeForce 9600 GT, 512 Mb
Hard Drives: C: Total - 476837 MB, Free - 246483 MB;
Motherboard: BIOSTAR Group, N68S3B
Antivirus: Norton Security Suite, Updated and Enabled
View 5 Replies
View Related
May 11, 2011
My notebook is usealy pluged to my 23' monitor on the desktop (aswell to the keyboard, mouse and speaker)
now sometimes i use both monitors (23' + 15,6' - I open the lid of the notebook)Can I show different wallpaper in each monitor?
View 10 Replies
View Related
Mar 19, 2012
I use WhoCrashed to analyze these errors but I dont know how to solve. Maybe my hardware cause these.
Processor: Intel Core 2 Quad CPU @ 2.40 Ghz
Ram: 2GB Corsair
OS: Windows 7 Ultimate 32-bit
VGA: ASUS 8600 GTS
Mainboard: ASUS Striker Extreme
View 3 Replies
View Related
Oct 31, 2009
I'm having a bit of trouble trying to get two monitors, a small 1024x768 LCD, and a 46" 1920x1080 TV, to display the same wallpaper at different resolutions. My graphics card is older, a Nvidia Quadro FX 1700, but it is perfectly capable of driving both displays at the same time. It's a minor annoyance, but I'd like to get it working if it's possible.
View 4 Replies
View Related
Apr 19, 2012
I have my Iiyama prolite connected via dvi and another TV via HDMI.As soon as the HDMI is plugged in I lose the DVI display and it transfers to the HDMI. The DVI is no longer detected.Does this mean if I want a second monitor I will have to set it up through VGA?
View 4 Replies
View Related
Dec 19, 2012
I recently got a new laptop and I have problems with my home wireless networkWhen both laptops are on and using the network (for browsing, no big data transfers) I'm experiencing big timeouts on one of the laptops (Always a different one). When the third PC is turned on the router even chrashes and needs o be restarted. Both lapops show that signal strength is excellent. The PC is connected via cable
View 2 Replies
View Related
Apr 1, 2010
In this tutorial, we'll show you how you can work with multiple files and folders at once. As you become more proficient using your PC, you may start to create and download a large number of files. When dealing with large collections of files, being able to work efficiently with multiple files and folders can be a huge time saver.
View 0 Replies
View Related
Jun 18, 2012
In Windows 7 I have no problem selecting multiple files in a normal folder for example. The problem is when using a program (such as Freestar AMR MP3 Converter) I cannot select multiple files at once. This can make using the program extremely tedious and time-consuming if there are large numbers of files to convert. It is not just this one program that does it, because other programs also fail to allow me to select multiple files. Again, I must state that this only seems to happen when using certain programs and not generally in Windows 7. Also, a small unrelated question: how do I get out of 'Libraries' view in My Documents and basically disable the Libraries view permanently, and just have it normal like in all earlier versions of Windows?
View 2 Replies
View Related
Jun 28, 2012
my internet stops working for ~30 seconds multiple times a day. I am using Time Warner Cable with a Motorla SBG6580 modem and Asus RTN56U router and a wired connection. When it drops the internet access icon in the bottom right doesn't change (no yellow exclamation point) and sometimes when I run the troubleshoot internet connections it will come back with "the DNS server isn't responding. The other computers in my house don't seem to have the problem. My computer uses a wired connection and am running Windows 7.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersAlex>ipconfig/all
[Code].....
View 1 Replies
View Related
Aug 22, 2011
Since installing a Second 1TB HDD into my system, I've been encountering brief lag before any action performed. For example, clicking Internet Explorer (Stored on HDD1) will completely Freeze the system for about 4 - 6 seconds, before proceeding. Also, clicking on a song or a video to play in Windows Media Player (Music and video stored on HDD2 and Program stored on SDD1) will also incur a 4 - 6 Second system freeze. Also since installation, my games have been slower and overall perfomance have dropped. I can constantly hear my HDD spinning up, asif it is idle every second I don't use it.
My stystem:
Code:
AMD Quad-core 3.0Ghz
8GB DDR3 RAM
40GB SSD / 2 x 1TB HDD
1GB ASUS EAH5670 DDR5 Graphics Card
[code]....
View 3 Replies
View Related
Oct 1, 2009
Is there an easier way to accomplish this on my laptop? I took an XP image from the first primary partition and copied it to the 2nd partition. When I rebooted to the second partition I thought wow this is just great!. My only problem is when I found out that the working OS saw the booted 2nd partition as the next drive letter and not C drive. Argggg...
How do I get around this? It's easy on my desktop PC because it has two drives and I keep XP on the 1st partition on both drives. But this seems to be a problem on the 1 drive laptop. People recommend on the internet to use EASYBCD but will this really solve this problem? What is the easiest solution? I am open to entering command line arguments. Could manually switching the "active" partition solve this problem using Gparted?
Once I get this solved I would then like to install Windows 7 and also protect the first two versions of XP. I already have my XP apps set on the first partition so I hope to keep that as-is. What is the best way?
View 1 Replies
View Related
Jul 15, 2009
Mum has 1 PC and 2 laptops, is there a version available on pre-order for 3 licenses like you can get for Office Home & Student?
View 4 Replies
View Related
Aug 20, 2009
I am using Windows 7 RC and will be moving most of our household PCs to Windows 7. I'm wondering if there is a way to create the same user ID on multiple machines so that no matter what machine a user logs onto they will see their same desktop and have access to their files, programs, bookmarks, same user rights/restrictions, etc.
This may be too much to hope for but thought I'd ask. Perhaps a home server is required or maybe use of Windows 7 file sharing could work?
View 9 Replies
View Related
Mar 2, 2012
This may just be an idle thought, but I'm wondering if one could setup a RAID configuration across two or more PCs? I know that one PC can have more than one RAID system in it, and even outside of it, with controller card going to an external case, but how about two totally separate PCs only connected via a Wireless adapter on a network?
View 4 Replies
View Related
Sep 1, 2009
Will windows 7 Ultimate allow the installation onto a home PC and laptop with the same installation disc?
View 4 Replies
View Related
Sep 4, 2009
Alright so I guess I have a bit of an issue. I had Vista installed on a 300GB harddrive, but I got a new harddrive and moved Vista over to that. Unfortunately I never actually reformated the 300GB hard drive so the bootmgr stayed there but was unused. With the new Vista it started a new bootmgr and is now the default bootmgr. Then I installed Windows 7 and that started a new bootmgr. But the BIOS still selects the Vista bootmgr and so I just added Windows 7 to that one. Except now I want to delete the Vista Bootmgr and the 300GB unused bootmgr and use the Windows 7 bootmgr. The Vista bootmgr no longer works for Windows 7 (Vista cannot correctly find the Windows 7 partition because it is set to the G: partition, but the Windows 7 windows folder is in S
I know I can delete the bootmgrs on the inactive drives, except I don't want to because I have no way of booting to the Windows 7 bootmgr. (Default boots to Vista, which would be gone, and using the Windows 7 DVD to boot uses the 300GB worthless bootmgr) If I use the Windows 7 DVD to repair the startup would it create a new bootmgr in the place of the two I delete or would it find the Windows 7 bootmgr and use that?
I'll be working on this for about another hour but if nothing works I'm nuking all three bootmgrs and rebuilding the bootmgr.
Update: Alright I've managed to get all the bootmgrs exactly the same so that everything boots correctly, however I still want to make the computer use the bootmgr on the 55GB Windows 7 drive because it is a 10,000RPM Raptor.
View 3 Replies
View Related
Nov 24, 2009
I have 2 computers
1. DELL Laptop, VISTA Business, 1.3GHZ core duo, 3 GBs Memory, plenty HD
2. Dell Desktop, XP Pro, 3 gbs Memory, 2.3 Core Duo, plenty of HD
question: Can i purchase 1 upgrade CD to Win 7 Home Professional and upgrade both these PCs? I have license numbers for each of these pc's for their respective OS's
View 2 Replies
View Related
Dec 14, 2009
So I currently have the RC version of Windows 7 installed and I purchased Win 7 ultimate and wish to do a clean install.
I have 3 HDDs, my main one which Win 7 is installed on now, another one that has nothing on it and another one which stores my media, and will have all my stuff backed up on from my main drive.
When I install windows 7 on my main HDD I will be formating it so everything is gone, once installed again will Windows 7 be able to see my other HDDs with all my files on them. Or will the other HDDs need to be formated for them to been seen.
That is my only problem, I am hoping that they will just be the same they are now, but I am confused because the windows 7 now knows the other HDDs as drive F and E, when it is reformatted I am not sure what will happen.
View 5 Replies
View Related