whenever I restart my computer, all my desktop icons move around to really weird locations.Here are the specs:
Asus G74SX built-in monitor: 1920x1080
External monitor: Acer X203H, 1600x900
Graphics card: NVIDIA GeForce GTX 560M 3GB VRAM
I've come across an issue where when I shut down and restart my PC on occasion all of my desktop icons will have moved.I am running a dual screen set up, screen 1 on the left, screen 2 on the right using screen 2 as the main display, running Win 7 Pro x64.
Windows gadgets are unaffected by this problem, only icons which are all moved onto the main display and largely jumbled up.
This doesn't happen every time I shut down. I am beginning to suspect it has something to do with the order of programs closing before windows shuts down, but I am not sure, and even less sure why programs which have no affect on the resolution would have any affect on the icon position.
Has anyone got any suggestions as to why Windows might be getting confused sometimes?
Yesterday i istalled Service pack 1 on my pc.
After that i found that i can't move any of my desktop icons. I don't know if there is a direct connection with the istallation of SP1.
Also i found that vlc doesn't properly. I have tried different version, but the problem is always the same: i can't move the video forward or back. I don't know if this problem too is connected with the istallation of the SP1..
Anyone else have this problem? I re-arrange them and when I reboot they're all over the place.
View 1 Replies View RelatedI cannot move the desktop icons in win 7. I have unchecked the audo arrange and that didn't help
View 1 Replies View RelatedWhen I connect to my PC from my laptop via Remote Desktop, it moves all my icons. Is there any way to disable this?
View 1 Replies View RelatedMy desktop Icons are locked in place. I move them to desire position and when I REFRESH the desktop, they return to previous position. They also change size after a reboot.
View 1 Replies View RelatedI don't recall any recent change before this issue, but everytime I start my computer, all my icons go to the left side of the screen. I temporarily downloaded a software to reset my icons when I start the computer, but I don't want to keep on having to go through this all the time. I tried the regedit...that didn't work. I tried right clicking the desktop and resetting them there...that doesn't work.
View 6 Replies View RelatedMy icons disappeared from my desktop after a restart!
View 8 Replies View RelatedWindows 7, SP1 32 bit
4gb RAM
1) Every time I restart my computer the icons on the desktop are completely scrambled. Thankfully I have a program that will restore them to their proper position. Originally I thought this may be due to an infection so I ran MalwareBytes AntiMalware and SuperAntiSpyware Free and both of them had no infections.
2) Also, on restart two open windows appear.
Computer > OS(C:) > Program Data > Microsoft > Windows > Start Menu > Programs > Startup > -Disabled
Computer > OS(C:) > User > My Name > Appdata > Roaming > Microsoft > Windows > Start Menu >
Programs > Startup > -Disabled
3) I have two icons on my desktop, Libraries and Home Group, that I am unable to remove.
4) Sometimes when I start a program requiring User Account Control, verification is required twice. First on the taskbar and then with the UAC window. Other times only with the UAC window.
For some reason recently the desktop icons keep changing every time I restart my laptop.I set them up how I like them (under right click, view) on small icons, but when I restart they automatically set themselves to medium icons. I was wondering why this is happening and what I can do to stop it happening? [code]
View 8 Replies View RelatedI have attached a second monitor to my laptop which runs Windows 7, however, I need to set different resolutions for different monitors, because the display does not fit to fill the screen on both monitors.
It is also noted that the display is replicated, and I would like to have the effect of having different desktops e.g. being able to use different applications such as debugging code on one monitor on an IDE such as Visual Studio, and, viewing the browser on the other monitor.
Currently it does not seem possible since the behavior seems to be that the same resolution is replicated on both monitors.
I would like to setup 2 monitors on my computer. I know my computer is older but it is very fast and I don't plan on using the monitors on resource hogging stuff
My specs are:
Intel pentium 4 3ghz HT ENABLED
4gb ram
1tb hdd
Nvidia gt 520 1gb
windows 7
My monitors are 2 different inputs / outputs
If I just plugged them both in to the plugin on my gpu would it work and have to adjust stuff? I have never used dual monitors so I don't know. One monitor has a 1600x900 (I plan on this being main monitor)
Other is 1024x768. One of them is dvi and other is vga.
I have a new machine that I have installed Windows 7 64bit (build 7100) and am having issues with the system detecting and selecting as my primary display monitors that dont exist.
I am running 2 Gigabyte GTX275s in SLI and have a Samsung 2443BW LCD via a single DVI cable. Nothing is plugged into the other connectors.
I wouldn't usually care if there were other disconnected displays being detected but my problem is it seems to randomly detect a range of monitors at each startup and pick one to be the primary display leaving my monitor blank. The screen will flash 3 or 4 times making the windows sound when you connect new hardware.
I have tried another monitor and get the same result. It is quite frustrating when you have to reboot the system often 3 times before you can get a desktop (an extended one still) so you can get to the display properties and make corrections that dont seem to last after a reboot. I have tried both the 186.18 and 190.15 Nvidia drivers.
Sometimes even into either the change the screen resolution or nvidia control panel will sometimes cause it to refresh all the monitors it detects and i can be left with a blank screen.
I hope I have given enough detail for someone to be able to assist.
I do currency trading from my home, and need to have a full screen dedicated to each currency I trade, each screen/currency running off the same PC at the same time. I know I can attach multiple monitors to my Windows 7 PC, but am not sure how to have the same program running simultaneously on 3 different monitors (that's the only way to get the 3 currencies to show as a full screen and have the ability to submit trade tickets independently based on respective currency). Seems as though the same image will appear on each monitor.Is this at all possible, or will I have to buy 2 additional PCs to put Monitors 2 and 3 on to accomplish this?
View 2 Replies View RelatedSo I recently found my copy of Battle for Middle Earth 2, and decided to give it a whirl for nostalgia's sake. Only, the moment I get into a game, I'm met with a glaring issue - I cannot scroll across the map in one direction, because my mouse simply moves onto the other monitor.
So, what I have tried, is fiddling with the resolution settings on the game itself - no change. I don't have the option to run it in a window, or move it to my other monitor to see if it persists there. how I might be able to fix this, short of just disabling the other monitor during gameplay?
It seems like a few programs, such as Adobe Photoshop CS4 and Adobe Dreamweaver CS4 (seems to be limited to Adobe), expand past my main monitor, and reach the monitors to the left and right.
This happens when the programs are maximized.
I've included two screenshots of this issue. Notice the additional black border around the main screen (middle one).
How to extend dvi output to multiple hdmi monitors? Have Samsung Series 7 Slate tablet computer running Windows 7 Ultimate 64-bit. Nature of computer prevents swapping out graphics card/module.
View 2 Replies View RelatedJust installed Windows 7. and everytime i start up a game (like left 4 dead)
all screens go black(like when they do when you set a other resolution) and back to normal resolution. when game resolution isn't different from the desktop resolution. and cause i ussually have a series running on one of my other monitors i can't see them cause well desktop thinks it not on its desktop resolution(or for what ever other reason it is that video won't show on second monitor if there is a game up on your main monitor that is not on ur normal desktop resolution).
this doesn't happen with every game though and can't really figure it out. if u need any info, or have no idea what i'm talking about(don't really know how to explain this very wel) post for more details.
3 Viewsonic 22" monitors and one Dell 24 inch monitor all running DVI cables.
I have three of the video cards in the computer to run multiple monitors. Windows 7 has a feature where when you plug in a monitor, it auto detects it and then enables it and sets its proper screen resolution. The problem is that when I plug in more than one monitor, I get inconsistent results.
Here are some examples:
Example 1 that happens: I have two monitors plugged in and I plug in a third monitor. It enables it within Windows 7, but the monitor does not actually turn on. If I restart the computer, somtimes it will stay enabled and boot up with all three monitors on.
sometimes when I reboot it, it again shows all three enabled but only two are actually on. This happens also when I plug a fourth or fifth monitor on. Sometimes two or three monitors will be on whereas one or two others will not be on but will show enabled in display properties.
Example 2 that happens: Sometimes when I plug in a second, third, or fouth monitor, it will actually show an additional monitor as disabled. For example, if I have three monitors plugged in and it shows three monitors enabled (regardless if all three are on and working), and I plug a fourth monitor in, then it enables the fourth monitor, sometimes it turns on, sometimes it doesnt, and it also shows a "generic non-pnp monitor" as number FIVE.
Even though only four displays are plugged in. I've seen this happen even if I plug in a third monitor (shows four, with 3 or number 4 disabled). If I try to enable that FIFTH "ghost" monitor, and click apply, it says "cannot save settings." You can see an example of this as an attachment.
When I plugged in another monitor, it shrunk 2 and there is also a 5 the same size but disabled. Strangely enough, the 2 says the pnp monitor and 5 says the model number of the monitor. However, enabling 5 does not actually enable it and says that it cannot save settings.
I have tried downloading the latest drivers from ATI 9-10 as well as Catalyst Control Center as well as Hydravision from ATI and also Ultramon multiple monitor software. I have tried deleting the ATI 3600 drivers WDDM 1.0 (maybe 1.1) from device manager, only to reboot and then it installed the drivers, reboot again and it brings back all of the whacky settings.
I have a couple of times got all four monitors enabled and all four monitors on where the cursor moves across them properly. EXACTLY what I want to have happen. If I restart it almost always comes back on as EXAMPLE 1 where only two of the four monitors will turn on, but it shows them enabled in display properties, or if all four monitors do come back on, they are not in the same order that I had them in and it actually shows FIVE in display properties.
To make this all even stranger, believe it or not, i've even had it boot and one of the monitors is BLACK & WHITE. What is so strange about this is that the Windows 7 logo when booting, the color Windows 7 logo, is indeed COLOR on that screen, but once it is actually in Windows 7, it is BLACK & WHITE.
If I do a restart, it sometimes comes back in full color. What this means is that there is color while Windows is loading, and then once in Windows one of the monitors is BLACK & WHITE throwing out the possibility of a bad video card.
Has anyone else experienced anything like this? Is there KNOWN issues with Windows 7 and ATI video cards or drivers? How about Windows 7 and Viewsonic or Dell monitors? This is extremely frustrating and looking for some guidance on the subject matter. I believe that the drivers, whether Windows WDDM default or ATI's are simply not correct with Windows 7. I never had this problem with Windows XP.
PLEASE See "win7_monitors.jpg" file to see what I am talking about concerning EXAMPLE 2.
Edit: I need to add that on example 1, where it shows enabled but the monitor does not come on, I have noticed that about 50% of the time when I put the Windows 7 into SLEEP mode, and take it out, the monitor(s) that were off are now on.
there are two icons, one looks like a triangular tower and the other looks like a pair of scissors. they show up in front of any window. can't move them or open them. they weren't on my pc desktop last time i used it.
View 1 Replies View RelatedI have updated several computers to Windows 7. On this particular computer (Dell Dimension 8400 desktop with Ethernet connection), each time there is a reboot or shutdown, when I log back in, the computer is disconnected from the network. I see that the router gives the computer an IP address, but Internet Explorer does not open Websites, Outlook does not receive email, etc.When I navigate to the 'Network and Sharing Center', I notice that there are 2 'Network Locations' - 1 'home' and 1 'public'. I have attempted to delete the 'public' location, and I have also attempted to merge the 2 'Network Locations' into 1. This seems to work, but I still cannot surf the Internet. Also, after a reboot, the 2 'Network Locations' are back--even after I merged or deleted them.
I have found a workaround for this. After each reboot and/or shutdown, I navigate to the 'Network and Sharing Center', I click on 'Change adaptor settings', I right-click to 'disable' the 'Local Area Connection', and finally I 'right-click' to 'enable' the 'Local Area Connection'. At that point, the 'public' location goes away (which leave only the 'home' connection) and I am able to immediately surf the Internet, receive email through Outlook, etc.This is a major issue because if the computer is rebooted, I can no longer connect to it remotely, until I am in front of the computer again to disable/re-enable the 'Local Area Connection' adaptor
All my desktop and start icons have changed to paint icons on my other laptop. When I click on any of them they try to open in paint program.
View 7 Replies View Relatedall my icons on desktop and computer have turned to notepad icons... and they open with some text on notepad... looking for a solution to go back to normal settings...
View 3 Replies View RelatedAt start up the icons are back on the grid and pushed to the left.
View 3 Replies View Relatedthere are two images or icons that appear to be together enclosed in a shaded rectangle. they are sitting on my desktop and cannot move them, open them or do anything to remove them. they weren't here last time I used my pc and they also appear in front of every window i open
View 1 Replies View RelatedSome of the icons normally showing what a program type is are missing now. I HAVE all the DESKTOP icons and those in the system tray. But in Windows Explorer lists or in Word Perfect and Word lists of file names, many of the small icons that normally appear next to a program's name, or showing what type of document or file it is, are now missing. Not all, just some. I have mostly open square boxes. It doesn't matter whether I'm looking at a list of files I've created, or looking at the items in various system folders: most are just empty open squares instead of the individual icons. I have Windows 7 64-bit OS , both Mozilla 17 and IE9 browsers.
View 2 Replies View RelatedExtending or showing desktop on more then 2 monitors, Is it possible?
My desktop icons change the size from small to medium after any numbers of restarts. They were small before and I would like them to stay that size. how to lock the size or why they change the size all the time.
View 9 Replies View RelatedI just changed all the drivers in my computer and updated my old xp os to windows 7. I am having a problem, I've pinned iTunes to my task bar, and unlike the other programs, when the short cut is highlighted when it is open, but with iTunes, another icon is created.
View 1 Replies View RelatedAfter my PC has been running for a certain amount of time (anywhere from a few hours to a few days) my folders no longer load/display the items inside correctly until I restart. I either get a completely blank folder where I know there are files, or I can see the files but the icons don't display. For instance, I am currently experiencing this, and in my "my documents" folder, some of the folder shortcuts show NO icon at all, just the blank placeholder and the text under it, and some just show a plain folder. When things are working correctly, each folder displays, usually showing media that is inside that folder or some type of specific icon.One thing that is common once this problem begins happening is the green loading bar that runs across the top of the folder window becomes slower the further to the right it goes, and never makes it all the way to the right. It slows and stops at about 95%.
This error is NOT present when I am looking at a folder through a program. For instance, if I go into Adobe Photoshop, then "Open," and then browse to My Documents, All of the foldrs in that "open" windows display correctly. Everything appears as normal in folders in this view, as opposed to nothing appearing if I open it in windows explorer.[URL]Finally here is a view of the FreeCorder folder where there ARE items stored, but nothing appears due to this error.Again, all i have to do is restart and everything will be fine again for a while. Then some magical trigger is executed (I have no idea what that trigger is) and things go funky like this.I DO put my computer on stand-by frequently, but that doesn't seem to be THE trigger, as it has come out of stand-by performing normally.
