Massive Amounts Of BSODs On Boot / Multiple Errors
Feb 23, 2012
I work at the IT department of a school where we have around 600 PC's that need to be maintained. Most things break by the kids and most is fixed my replacing, or simply imaging said computers again.However, after having switched over from Windows XP to Windows 7 we've been having masses of BSODs when loading Windows. Not just the normal PC's, not just linked to one type (although pretty much everything is from HP). But it keeps happening.The most common errors that we've been able to discover are:0x00000018, 0x0000000A, 0x0000007E, 0x000000BE.After having researched these things, they all turned out to have something to do with drivers, not only that, but when trying to boot into safe mode the PC's would all freeze at "classpnp.sys" and sometimes reboot shortly after.Our current solution is simply putting a new Windows 7 image over the computer and it'll work another day or two. It's great that it works again then, but we spend too much time on it.
It can't possibly be the hardware, there are too many different kinds of computers for it to be that. I'm quite sure the problem is somewhere originating from the drivers we install, but then he question comes as to what ruins the drivers? Not to mention that there are also different drivers for the different kinds of PC's.
View 9 Replies
ADVERTISEMENT
Jun 26, 2011
I purchased a new Dell XPS 17 and have previously been a long time user of XP. One big reason I am already not a fan of Windows 7 is because while some things have improved other things have gotten worse. By far this is the worst problem:
In XP my Duration online can be 1-2 days and would barely hit a million or a million and a half of packets for sent and outgoing individually. With the Same exact setup in Windows 7 what takes days in XP I experience in about 1 Hour in Windows 7!! As of right now I have over 19million outgoing packets! Similar for Received. What gives?? I have searched online and am hoping i'm not the only one with this issue.By the way I have an Intel 1000BGN Internal Adapter but I have it disabled and am using an Alfa AWUS036h b/g adapter. My router is a Netgear N300 WNR2000v2. I am experiencing very low speeds 1-5.5 and occasionally a stable 11mbps. I firmly believe this network traffic is causing both my low speeds and my random and frequent limited access / disconnections.
View 8 Replies
View Related
Feb 4, 2012
I downloaded and played the Diablo 3 beta for my first time. When I got in game, i noticed that every time I tried to move my character, the game would freeze up like 10 seconds. Because this was happening I tried to restart the game. Turns out that didn't help so i proceeded to trying to restart my computer to see if that would help, but as the screen was at the part where it shows that you are logging off, I got a BSOD. I have gotten BSODs before, and simply had to restart while on them to get the computer to run normally, but this time when I got the BSOD and tried to usual method of restarting, I kept getting BSODs that automatically restarted the computer again in an infinite loop of BSODs. To stop it from automatically restarting after the BSODs, I hit the option to make it not auto restart after the BSOD so I can get a look at what it actually said. I noticed that when i was getting the BSODs, the error messages weren't always the same. Some said things like "SYSTEM_SERVICE_EXCEPTION" and "BAD_POOL_HEADER."I also noticed that the number and letters at the bottom weren't the same with every BSOD. Since I am unable to access to my computer's desktop, I couldn't pull a proper log of the errors so I had so i just went ahead and read some and wrote them down by hand.
View 8 Replies
View Related
Jul 1, 2012
I should note I have been here before and posted about BSODs I was having. Unfortunately, at the time something came up and I never got around to coming back. By now, however, the problem has gotten worse. Before, it only crashed when I was playing graphic-heavy games. Now it crashes at completely random times as well, including when the computer is supposed to be idle.
The three errors I most commonly see are something among the lines of:
A clock interval was not received on a secondary processor within the allocated time interval
System_Service_Exception
Page fault in nonpage area (win32k.sys)
A little background info:
My version of windows 7 is 64 bit and came pre-installed on the PC, but it was a custom-built model, so I got the disc along with it. I purchased the PC about 6 months ago.
I ran Memtest without any issues.
I ran Driver Verifier for a hell of a long time before my computer finally crashed again in the past. The Dump file would have been created around 28-02. Problem is, I've tried running the verifier again since and my computer won't start when it's on now.
View 9 Replies
View Related
Jan 30, 2012
My computer has crashed twice today, giving me error code 0x00000101. The first time was while watching Netflix, and the second time was while playing Minecraft. Additionally, I got an error code 0x0000007A (ataport.sys) while surfing the internet.
View 1 Replies
View Related
Mar 19, 2012
I use WhoCrashed to analyze these errors but I dont know how to solve. Maybe my hardware cause these.
Processor: Intel Core 2 Quad CPU @ 2.40 Ghz
Ram: 2GB Corsair
OS: Windows 7 Ultimate 32-bit
VGA: ASUS 8600 GTS
Mainboard: ASUS Striker Extreme
View 3 Replies
View Related
Jun 16, 2012
My laptop is around 9 months old, and first showed a few BSODs about 6 months ago. It is still within warranty, and I sent it back to the manufacturer, who apparently did a RAM burn-in or test, found nothing, factory reset it and sent it back. This solved the problem for a few months before it started again, and it has continued for the past month or so. The error codes are in the title in abbreviated form. The BSODs tend to occur when either loading the desktop or launching a program, but they aren't reliably caused by anything and I think they have sometimes happened when doing basic word processing/web surfing etc.I have run the windows memcheck for a total of 4 passes (2 on standard setting, and 2 on extended) and dskchk at least twice, both with no joy. I updated drivers, and finally the BIOS about a week ago. Since the BIOS update I have had no BSODs, but they are really sporadic (occurring sometimes every day, sometimes once a fortnight),I tried looking at the minidumps (attached) with BlueScreenView, which shows a problem every time with ntoskrnl.exe, and sometimes fbfmon.sys, fltmgr.sys, hal.dll, and fileinfo.sys additionally, but none of these other files are consistently flagged as problems.
View 9 Replies
View Related
May 24, 2011
I just built a new computer for my inlaws and had several BSODs with different bccodes (1, 1a, a). I formatted and reinstalled the OS, updates, as well as clean installs of all recent drivers downloaded from the manufacturer websites. I have had several BSODs after this and I am worried that it may be related to the memory I have installed.
I ran a full disk scan, as well as SeaTools short and long tests. These were all passed with no errors. Also, I have updated the bios to the most recent, reseated ram, unplugged/replugged all sata and power cables inside. Specs are as follows:
Windows 7 Home Premium x64
CPU: AMD Phenom II 555 3.2Ghz Quad Core
Motherboard: Asus M4A785-M onboard sound, video, wired lan
Memory: G.Skill 4GB DDR2-800 (2x2gb) F2-6400CL5D-4GBNT
HDD: Seagate Barracuda 320gb SATA2
View 9 Replies
View Related
Jan 11, 2012
Windows 7 . . .
- x64
- the original installed OS on the system? Yes
- an OEM version
- What is the age of system (hardware)? Approx 1 1/2yrs.
- What is the age of OS installation (have you re-installed the OS?) Original install. Approx 1 1/2yrs.
View 3 Replies
View Related
Feb 5, 2012
I have a client (company) who I've built and connected multiple computers for--all with the same hardware. All but one out of 8 have been great. This last one is causing me hell. I've analyzed the dumps (but I'm a rookie to crash dump examinations), and I originally thought it was a graphics driver issue. I removed the card from device manager, driver swept the drivers, and installed the newest drivers after the re-install of the card. Still two more BSODs (see the last two dumps for that).
Specs:
Windows 7 Pro x64
Original OS
Full Retail version
System is 4 months old
OS installed when system was built
View 6 Replies
View Related
Mar 30, 2012
I keep getting BSODs while using my computer.I'm not familiar with software and OS interfaces,I have an HP laptop dv7-1451nr.I have windows 7 ultimate x64. My laptop is around 3-3.5 years old now and I recently reformatted with the windows 7 ultimate OS. My friend look at the hardware for me and we found one RAM stick was bad and took it out so now I'm down to 2GB of RAM. The BSODs seem to happen mainly while I'm either trying to play a game, while those are the most consistent I sometimes get random BSODs doing what I can do right now on this computer.
View 1 Replies
View Related
Aug 20, 2012
This HP system system began to experience bugcheck d1 BSODs back in May (I'm just now getting around to taking a serious look at why). I've run tests on the memory and hard drive, which seem to be OK. Scans with Norton 360 and MBAM turned up nothing scary
View 3 Replies
View Related
Nov 9, 2012
My Windows 7 Ultimate X64, on an E6510 pc experiences most the BSOD after it has booted in a morning after being hibernated the night before. The details of the BlueScreen description is:
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7601.2.1.0.256.1
Locale ID:1033
Additional information about the problem:
BCCode:d1
BCP1:0000000000000090
BCP2:0000000000000002
BCP3:0000000000000001
BCP4:FFFFF88002FC2353
OS Version:6_1_7601
Service Pack:1_0
Product:256_1
View 1 Replies
View Related
Apr 29, 2012
I recently got another different BlueScreen, with an older not resolved. I got two BCodes, 0x000000c2 and 0x0000005a. I ran 'chk dsk /f' and ' sfc /scannow' and got no errors. Latest BSOD Earlier BSOD
- x86 (32-bit) or x64 ? 64 bit Windows 7 Ultimate
- the original installed OS on the system? Not originally installed. - an OEM or full retail version? Retail. - What is the age of system (hardware)? 2 months. - What is the age of OS installation 2 months. I attached 'Windows_NT6_BSOD_jcgriff2' and 'perfmon.html' below.
View 1 Replies
View Related
Jun 10, 2012
I just finished installing Windows 7 Enterprise x86 on someones PC, and installed some drivers and applications.However, I've gotten 2 BSOD's (so far) whilst browsing with Internet Explorer, the computer was not stressed. Another one was during an online ESET Virusscan.I don't quite feel like installing Windows 7 YET again, so any help trying to locate the error and fixing it is much obliged.
Windows 7 Enterprise x86
ASUS P5RD1-V
Ati RADEON X300 Onboard Graphics
View 2 Replies
View Related
Aug 20, 2012
I've been having quite a few blue screens lately after installing and playing a few games I bought off the Summer Sale not too long ago, and they seem to be jumping all over the place as to what the issue really is. It was mainly when I would play the game "Saint's Row the Third", which would result in a random BSOD between a few minutes to an hour or so of play, if the game itself didn't crash first for some reason, but I just recently installed TF2 for the first time on this new machine of mine and I've gotten several BSOD a day now as a result. Like... Now I get about 3+ crashes a day, and almost always guaranteed a crash whenever I try to run that game, compared to before where it was isolated to SR3 or the occasional one here or there.I got a message about a .sys file related to Avast! Anti-Virus trying to access memory after it was freed in a BSOD message earlier on, and it improved my stability quite a bit after I uninstalled the whole progam, but I've had a few more crashes since I wiped that out earlier today.
View 1 Replies
View Related
Dec 16, 2012
Dual Core Windows 7 Pro 64 bit Toshiba laptop. My daughter was working on a Power Point project for school. She went to plug in her flash drive and it didn�t seem to load the drive up. She unplugged it and then plugged it back in. We got a BSOD. We restarted it and it BSOD again. I tried some general troubleshooting, including restoring it to a previous version, and now cannot get into Windows at all. Not even in safe mode. Now I am getting multiple BSODs.
Currently I am seeing these BSODs:
I am getting one when just trying to start and run windows I am getting a BSOD about memory management.
If I try to go into safe mode it loads the files and then I get a BSOD regarding the fbwf.sys. Using the Windows 7 disc I have been able to get to the System Recovery Options. It finds my install and then blue screens with IRQL_NOT_LESS_OR_EQUAL or Driver_IRQL_NOT_LESS_OR_EQUAL even before it gets to finding my install.
Other BSODs I know I have seen are regarding the Ntfs.Sys and PAGE_FAULT_IN_NONPAGED_AREA.
View 1 Replies
View Related
Mar 30, 2012
In the last month i got 6-7 random BSODS. My system specifications:
- x64.
- the original installed OS on the system? - YES.
- FULL RETAIL
- 3 years.
- Install date: 11.12.2010
View 5 Replies
View Related
Dec 16, 2012
Dual Core Windows 7 Pro 64 bit Toshiba laptop. My daughter was working on a Power Point project for school. She went to plug in her flash drive and it didn't seem to load the drive up. She unplugged it and then plugged it back in. We got a BSOD. We restarted it and it BSOD again. I tried some general troubleshooting, including restoring it to a previous version, and now cannot get into Windows at all. Not even in safe mode. Now I am getting multiple BSODs.
Currently I am seeing these BSODs:
I am getting one when just trying to start and run windows I am getting a BSOD about memory management. If I try to go into safe mode it loads the files and then I get a BSOD regarding the fbwf.sys.
Using the Windows 7 disc I have been able to get to the System Recovery Options. It finds my install and then blue screens with IRQL_NOT_LESS_OR_EQUAL or Driver_IRQL_NOT_LESS_OR_EQUAL even before it gets to finding my install.
Other BSODs I know I have seen are regarding the Ntfs.Sys and PAGE_FAULT_IN_NONPAGED_AREA.
View 1 Replies
View Related
Sep 1, 2012
Toshiba Satellite 655, 64 bit OS, Intel. Celeron CPU 925@2.30 GHz
View 6 Replies
View Related
Feb 6, 2013
I wanted to install something in my laptop, but, DVD drive is NOT THEREin My Computer. So, I think that I should relaunch explorer.exe. then, bad things start to happen, all icons is gone and the icons change to "Folder" icon. If I want to open something in taskbar, it will be endless loading.
And in my task manager, it is flooded with explorer.exe (800-900 processes)
I'm using Windows 7 Ultimate 64 build 6.1 I cant update because if I launch Windows update, it will freeze.
View 1 Replies
View Related
Feb 4, 2012
I have been trying to resolve some BSOD I got on my PC. To do this I also re-installed windows several times. I build and install everything by myself for years, but this is the first PC with a lot of BSODs. I used the Debugging Tool for windows to check the minidumps by myself, but as far as my knowledge goes, I didn't find anything special in there. The only thing that was obvious was that in all BSODs the ntoskrnl.exe was involved. This was something BlueScreenView revealed also. In my opinion however it seems there is more to it, since the ntoskrnl.exe could probably also crash because of another driver or hardware problem.On my previous fresh Windows 7 Install I did found out once that alot of BSOD I had at that time were caused by a bad Creative driver for my X-Fi. On the web I found a useful hint, because other X-Fi users pointed to the beta-drivers for the card. The official Creative drivers are almost two years older then these beta drivers, so obviously the beta drivers should be the first choice. These drivers are the ones I use now. I also had some problem with my OCZ Vertex 3 MI, like most owners of this hardware, and the problem was the unstable firmware. I am using the latest firmware now, which is 2.15, and that made the system alot more stable. The third problem is happening in POST: my logitech G110 keyboard features an USB hub and connection for media. These kind of USB keyboards had some problem with recognision and initialisation in the UEFI BIOS. For that I also updated to the latest BIOS for my motherboard.
All in all you can see I discovered and tried to fix a lot of different causes for BSODs. I also ran memtest once on the system for two hours, but this was in Dual Channel setup. Didn't gave any errors anyway.The latest minidump is created by the use of Verifier. I turned verifier on to test the two drivers for my AMD HD6970(crossfired). After 5 minutes in windows the BSOD appeared. I am using AMD Catalyst 12.1 drivers. I tried this, because the BSODs all are different then the ones I had on previous Windows 7 installations (on the same pc), but the only thing I changed in the current installation, was the AMD 12.1 drivers.I reinstalled windows about two weeks ago, after using Secure Erase on my SSD. I installed only the latest drivers for all the things that need drivers. The complete installation, including windows updates and drivers, was without any fault. One day later the first BSOD appeared, etc. I use the system to play Battlefield 3 only, since the fresh install. Strangely, I played more then 50 hours in the game, without any crash or BSOD! The new AMD FX-8150 processor is the first to support native 1866 MHz DDR3. The motherboard specification showed that the board supported 1866 (OC), thus it's seen as an overclock. I set all settings in bios like the ram specificiation told, which is: 9-11-9-27 2T @1.65V. Still, it could be that the 1866 MHz is too much on standard NB voltages? It's something I couldn't find an answer to on the internet, and since I never overclock I don't have that much experience with the voltages.
All BSODs happened in different situations, like just after windows log in, or when I start a program, or when idling, or when browsing the internet.Since I couldn't figure out any more usefull details out of the minidumps, I hope someone here with more experience could check the attached files.
View 3 Replies
View Related
Mar 7, 2012
Computer is a few years old, a home build, running Windows 7 Home Premium x64. Haven't really had too many problems other than the occasional BSOD or random restart, but it's gotten a lot worse lately so I wanna get to the bottom of it.The two errors I've gotten are Memory Management and System Service Exception, both seem to be linked to the ntoskrnl.exe file. I also ran the System File Checker and got the following error reported: "Cannot repair member file [l:24{12}]"kerberos.dll" of Microsoft-Windows-Security-Kerberos". Lastly I ran the windows memory diagnostic and it detected several hardware errors.
1)A system restore to a couple weeks ago
2)Repair the system/OS with my Windows 7 disc
3)Replace the RAM
Wanted to post here before I try any of those though. Whew ok sorry to be long winded but wanted to provide as much info as possible.
View 5 Replies
View Related
May 11, 2012
I have searched everywhere but I have been unable to find anyone having the same problems as I. I am running 64bit windows 7.I have been trying to get the computer to updates, though when I reboot it fails to configure the updates, gets to 35% and always fails with error code 80071AB0. After searching Microsoft Support, some people recommended running sfc.exe to scan for corrupted files, then to fix them and reboot. Well, I found no corrupted files on the drive hence there was nothing to fix. Also, I have tried to download the Microsoft Fix-It and run it, though that is to no avail as well. I have attempted to preform a clean boot with my anti-virus disabled to rule out a software problem and that also didn't change anything.When I open Windows Updates and attempt to install them, I get an 80070643 error.I also get these same errors when trying to install the updates from a downloaded file.
View 6 Replies
View Related
Jan 18, 2012
[code] I couldn't do a health report due to being stuck with safe mode with networking. The BSOD started about two months ago while the gf was using it and didn't happen for me till yesterday. As of now I can get it to start normally but It crashes any time I open anything. I tried swapping ram and no change. I honestly don't know a whole lot about windows 7.
View 9 Replies
View Related
May 23, 2012
I've been getting BSODs randomly while playing Arma 2 with the Dayz mod. At first I thought it must be something with the game but I've also gotten BSODs playing Red Orchestra 2: Heroes of Stalingrad but I've also played other games like Portal 2 without problems. Thinking it might be driver related I did a fresh install of windows but to no avail.Half the time the game will crash randomly anywhere from 10 minutes of play to 4 hours giving a 0x000005 exception code. The other half of the time my computer will hang and BSOD giving me a different bccode almost every time. The most recent is 10007e and the only other one I remember is d1 which is one of the few that I've gotten multiple times.The Windows Desktop Manager has also crashed twice but I'm not sure it that is related.It was custom built a year ago and was problem free until about a month ago when the BSODs start. They stopped for a while but started again about a week or two ago.
View 9 Replies
View Related
Aug 12, 2012
This is my gf's custom pc she built herself about 6 years ago. I has been used and abused by her siblings. It was having all kinds of problems so she had a friend look at it and clean everything inside. It was still crashing so I reformatted and reloaded the OS, trying to just get a clean start. Although, the issue of crashing has been improved through this, it is not cured.
I get BSOD while playing games, surfing the web, while sitting idle, after coming back from sleep, pretty much anytime. Sometimes I get no BSOD for hours, other times its more constant.
sometimes it says DRIVER_IRQL_NOT_LESS_OR_EQUAL
usually usbport.sys / nvlddmkm.sys
and usually 0x000000D1
View 9 Replies
View Related
Aug 12, 2012
So a few months ago I started getting BSOD while rendering with Adobe Premiere. The odd part was that I would only get them when actually using export from with Premiere. If I queued them in Adobe Media Encoder it would generally be fine. Eventually things persisted to BSOD randomly occurring, sometimes 5 a day sometimes weeks a part. Eventually I bought a new SSD and reinstalled Windows. Things returned to normal, with BSOD only occurring while using export, but today things seemed to have returned to there old ways.
I may also add that since I've built this computer things have acted weird. Chrome plugins randomly crash. Shockwave player crashes constantly. I can't install DirectX.
View 2 Replies
View Related
Aug 20, 2012
I just recently contracted a virus and opted to reformat 2 of my 3 hard drives (the 3rd was used to store documents and backups form the other 2) After reformat/install everything seemed fine until I proceeded to re-install several of my games.
Borderlands installed and proceeded to give me an error that one of the physX .dlls was missing. I managed to find the dll and get it re-installed but then another physXextensions.dll was missing which I was not able to fix, but the game itself works and plays fine.
Then I re-installed Alpha Protocol (worked fine) proceeded to install the 1.1 update and found a missing nxcooking.dll was missing (fixed and then found another)
At this point I found 2 different programs that scanned my registry and dlls and each found approximately 150 errors. Therefore I am planning to reformat all 3 drives and re-install again
View 2 Replies
View Related
Mar 29, 2012
recently, i have had many bsod consecutively. recently, i have had about 9 bsod over about 5 days (although the report lists a break between my bsod between 2/21 and 3/27 because i was on break for most of this). in the past i have gotten bsod while playing games, but the recent ones have been while doing mundane tasks such as browsing the internet or watching Internet videos?i have used bluescreenview to try to discover the cause of my problem, but every bsod seems to have a different error and file associated with it. many of them are blamed on ntoskrnl.exe, but have different error messages. some are from different files.i am running windows 7 64 bit on a desktop i built about 15 months ago. since then, i have gotten many error messages, but more recently. i have 8 gb of ram, geforce gtx 470, amb phenom ii black multicore processor, and gigabyte 890gpa-ud3h motherboard. i assembled the desktop components and installed all software new onto the computer.
things i have tried recently: resetting the ram in different slots, running antivirus (i have avg free, malwarebytes, and spybot), cleaning the computer fans, uninstalling/driversweeping the video card drivers and reinstalling, disabling the motherboard sound card through bios so the external sound card i have installed does not interfere, running cmd /chkdsk with fix to try to correct any errors found. i have been dealing with bsod a lot frequently, although it has usually only been about 1 per week in the past. these are extremely frequent recently with multiple per day and it is interfering with my work. attached are the files requested.
View 9 Replies
View Related
Oct 26, 2011
I am building a budgetpc. I bought new in box an AMD X3 450 and a asus m4a78lt-mle mobo, and 4gb of DDR3 1333mhz memory Kingston. First off out of the box the processor posts as a amd x4 b50. Not sure if they packaged the wrong one or the mobo is reading wrong. I don't want to pull the cpu fan back off tok read the cpu. I did a clean install of Windows 7 ultimate. After install finished I went to install drivers, well the mobo drivers cd was not in the mobobox so I planned on installing usb wireless nic and downloading drivers. This is where the problem starts.
When I click on the exe install file I get, a cmd box popup that says program to big to fit into memory. So I cant install any drivers, I downloaded alla the mobo drivers from asus on a thumb drive and copied over to the hard drive. Tried to run those files and i get the same error message. So I reinstalled Windows 7 this time the 64bit version and this time i still get the same error but on other exe files I get a message saying that they are not 64 bit files. Even though I downloaded the 64bit version. So I am not sure what is up. All parts were new in box.
View 1 Replies
View Related