Multiple BSODs After Booting From Hibernation
Nov 9, 2012
My Windows 7 Ultimate X64, on an E6510 pc experiences most the BSOD after it has booted in a morning after being hibernated the night before. The details of the BlueScreen description is:
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7601.2.1.0.256.1
Locale ID:1033
Additional information about the problem:
BCCode:d1
BCP1:0000000000000090
BCP2:0000000000000002
BCP3:0000000000000001
BCP4:FFFFF88002FC2353
OS Version:6_1_7601
Service Pack:1_0
Product:256_1
View 1 Replies
ADVERTISEMENT
Sep 30, 2012
My laptop wont start after hibernation. The hard drive starts to spin up after I hit the power button but stops and the screen stays black. The power is still going (I checked the lights) but it still doesn't start. Once I completely turn it off by holding the power button, it starts fine. It wouldn't be a huge deal except I lose everything that I had running.
View 1 Replies
View Related
Jan 12, 2013
I have an issue with my touch pad. If I put my laptop into Hibernation and reboot my touch pad doesn't work. The only way it would work is if I booted up normally or reset it. I have tried updating the drivers but it keeps on happening. My Laptop is always up-to-date. I have tried a clean install of my touch pad drivers but it doesn't fix the problem.
Windows 7 Home Premium 64 Bit
Samsung Series 3
6GB DDR3 RAM
AMD A6-APU 1.5GHz
View 2 Replies
View Related
Dec 24, 2011
Some months ago we bought a Eee PC1015PN. It had Windows 7 STARTER installed. After using it for a while, the netbook seemed to be slow and bloated. So I chose to get a Windows 7 ultimate. After Windows installation, I started to install the drivers from asus site. Installing the video card drivers was a pain, I had to reinstall the windows once again because of this. The problem was, I installed the wireless drivers and connected to the internet, then installed Graphics Switch and selected OPTIMUS, restarted, but then WINDOWS started installing both drivers.
View 9 Replies
View Related
May 24, 2011
I just built a new computer for my inlaws and had several BSODs with different bccodes (1, 1a, a). I formatted and reinstalled the OS, updates, as well as clean installs of all recent drivers downloaded from the manufacturer websites. I have had several BSODs after this and I am worried that it may be related to the memory I have installed.
I ran a full disk scan, as well as SeaTools short and long tests. These were all passed with no errors. Also, I have updated the bios to the most recent, reseated ram, unplugged/replugged all sata and power cables inside. Specs are as follows:
Windows 7 Home Premium x64
CPU: AMD Phenom II 555 3.2Ghz Quad Core
Motherboard: Asus M4A785-M onboard sound, video, wired lan
Memory: G.Skill 4GB DDR2-800 (2x2gb) F2-6400CL5D-4GBNT
HDD: Seagate Barracuda 320gb SATA2
View 9 Replies
View Related
Jan 11, 2012
Windows 7 . . .
- x64
- the original installed OS on the system? Yes
- an OEM version
- What is the age of system (hardware)? Approx 1 1/2yrs.
- What is the age of OS installation (have you re-installed the OS?) Original install. Approx 1 1/2yrs.
View 3 Replies
View Related
Feb 4, 2012
I downloaded and played the Diablo 3 beta for my first time. When I got in game, i noticed that every time I tried to move my character, the game would freeze up like 10 seconds. Because this was happening I tried to restart the game. Turns out that didn't help so i proceeded to trying to restart my computer to see if that would help, but as the screen was at the part where it shows that you are logging off, I got a BSOD. I have gotten BSODs before, and simply had to restart while on them to get the computer to run normally, but this time when I got the BSOD and tried to usual method of restarting, I kept getting BSODs that automatically restarted the computer again in an infinite loop of BSODs. To stop it from automatically restarting after the BSODs, I hit the option to make it not auto restart after the BSOD so I can get a look at what it actually said. I noticed that when i was getting the BSODs, the error messages weren't always the same. Some said things like "SYSTEM_SERVICE_EXCEPTION" and "BAD_POOL_HEADER."I also noticed that the number and letters at the bottom weren't the same with every BSOD. Since I am unable to access to my computer's desktop, I couldn't pull a proper log of the errors so I had so i just went ahead and read some and wrote them down by hand.
View 8 Replies
View Related
Feb 5, 2012
I have a client (company) who I've built and connected multiple computers for--all with the same hardware. All but one out of 8 have been great. This last one is causing me hell. I've analyzed the dumps (but I'm a rookie to crash dump examinations), and I originally thought it was a graphics driver issue. I removed the card from device manager, driver swept the drivers, and installed the newest drivers after the re-install of the card. Still two more BSODs (see the last two dumps for that).
Specs:
Windows 7 Pro x64
Original OS
Full Retail version
System is 4 months old
OS installed when system was built
View 6 Replies
View Related
Mar 30, 2012
I keep getting BSODs while using my computer.I'm not familiar with software and OS interfaces,I have an HP laptop dv7-1451nr.I have windows 7 ultimate x64. My laptop is around 3-3.5 years old now and I recently reformatted with the windows 7 ultimate OS. My friend look at the hardware for me and we found one RAM stick was bad and took it out so now I'm down to 2GB of RAM. The BSODs seem to happen mainly while I'm either trying to play a game, while those are the most consistent I sometimes get random BSODs doing what I can do right now on this computer.
View 1 Replies
View Related
Aug 20, 2012
This HP system system began to experience bugcheck d1 BSODs back in May (I'm just now getting around to taking a serious look at why). I've run tests on the memory and hard drive, which seem to be OK. Scans with Norton 360 and MBAM turned up nothing scary
View 3 Replies
View Related
Apr 29, 2012
I recently got another different BlueScreen, with an older not resolved. I got two BCodes, 0x000000c2 and 0x0000005a. I ran 'chk dsk /f' and ' sfc /scannow' and got no errors. Latest BSOD Earlier BSOD
- x86 (32-bit) or x64 ? 64 bit Windows 7 Ultimate
- the original installed OS on the system? Not originally installed. - an OEM or full retail version? Retail. - What is the age of system (hardware)? 2 months. - What is the age of OS installation 2 months. I attached 'Windows_NT6_BSOD_jcgriff2' and 'perfmon.html' below.
View 1 Replies
View Related
Jun 10, 2012
I just finished installing Windows 7 Enterprise x86 on someones PC, and installed some drivers and applications.However, I've gotten 2 BSOD's (so far) whilst browsing with Internet Explorer, the computer was not stressed. Another one was during an online ESET Virusscan.I don't quite feel like installing Windows 7 YET again, so any help trying to locate the error and fixing it is much obliged.
Windows 7 Enterprise x86
ASUS P5RD1-V
Ati RADEON X300 Onboard Graphics
View 2 Replies
View Related
Aug 20, 2012
I've been having quite a few blue screens lately after installing and playing a few games I bought off the Summer Sale not too long ago, and they seem to be jumping all over the place as to what the issue really is. It was mainly when I would play the game "Saint's Row the Third", which would result in a random BSOD between a few minutes to an hour or so of play, if the game itself didn't crash first for some reason, but I just recently installed TF2 for the first time on this new machine of mine and I've gotten several BSOD a day now as a result. Like... Now I get about 3+ crashes a day, and almost always guaranteed a crash whenever I try to run that game, compared to before where it was isolated to SR3 or the occasional one here or there.I got a message about a .sys file related to Avast! Anti-Virus trying to access memory after it was freed in a BSOD message earlier on, and it improved my stability quite a bit after I uninstalled the whole progam, but I've had a few more crashes since I wiped that out earlier today.
View 1 Replies
View Related
Feb 23, 2012
I work at the IT department of a school where we have around 600 PC's that need to be maintained. Most things break by the kids and most is fixed my replacing, or simply imaging said computers again.However, after having switched over from Windows XP to Windows 7 we've been having masses of BSODs when loading Windows. Not just the normal PC's, not just linked to one type (although pretty much everything is from HP). But it keeps happening.The most common errors that we've been able to discover are:0x00000018, 0x0000000A, 0x0000007E, 0x000000BE.After having researched these things, they all turned out to have something to do with drivers, not only that, but when trying to boot into safe mode the PC's would all freeze at "classpnp.sys" and sometimes reboot shortly after.Our current solution is simply putting a new Windows 7 image over the computer and it'll work another day or two. It's great that it works again then, but we spend too much time on it.
It can't possibly be the hardware, there are too many different kinds of computers for it to be that. I'm quite sure the problem is somewhere originating from the drivers we install, but then he question comes as to what ruins the drivers? Not to mention that there are also different drivers for the different kinds of PC's.
View 9 Replies
View Related
Dec 16, 2012
Dual Core Windows 7 Pro 64 bit Toshiba laptop. My daughter was working on a Power Point project for school. She went to plug in her flash drive and it didn�t seem to load the drive up. She unplugged it and then plugged it back in. We got a BSOD. We restarted it and it BSOD again. I tried some general troubleshooting, including restoring it to a previous version, and now cannot get into Windows at all. Not even in safe mode. Now I am getting multiple BSODs.
Currently I am seeing these BSODs:
I am getting one when just trying to start and run windows I am getting a BSOD about memory management.
If I try to go into safe mode it loads the files and then I get a BSOD regarding the fbwf.sys. Using the Windows 7 disc I have been able to get to the System Recovery Options. It finds my install and then blue screens with IRQL_NOT_LESS_OR_EQUAL or Driver_IRQL_NOT_LESS_OR_EQUAL even before it gets to finding my install.
Other BSODs I know I have seen are regarding the Ntfs.Sys and PAGE_FAULT_IN_NONPAGED_AREA.
View 1 Replies
View Related
Mar 30, 2012
In the last month i got 6-7 random BSODS. My system specifications:
- x64.
- the original installed OS on the system? - YES.
- FULL RETAIL
- 3 years.
- Install date: 11.12.2010
View 5 Replies
View Related
Dec 16, 2012
Dual Core Windows 7 Pro 64 bit Toshiba laptop. My daughter was working on a Power Point project for school. She went to plug in her flash drive and it didn't seem to load the drive up. She unplugged it and then plugged it back in. We got a BSOD. We restarted it and it BSOD again. I tried some general troubleshooting, including restoring it to a previous version, and now cannot get into Windows at all. Not even in safe mode. Now I am getting multiple BSODs.
Currently I am seeing these BSODs:
I am getting one when just trying to start and run windows I am getting a BSOD about memory management. If I try to go into safe mode it loads the files and then I get a BSOD regarding the fbwf.sys.
Using the Windows 7 disc I have been able to get to the System Recovery Options. It finds my install and then blue screens with IRQL_NOT_LESS_OR_EQUAL or Driver_IRQL_NOT_LESS_OR_EQUAL even before it gets to finding my install.
Other BSODs I know I have seen are regarding the Ntfs.Sys and PAGE_FAULT_IN_NONPAGED_AREA.
View 1 Replies
View Related
Jul 21, 2011
So what I do now is:1) Delete "DosDevicesC:" in "HKEY_LOCAL_MACHINESYSTEMMountedDevices" and some other DosDevices that will have an other letter booting the clone.2) Using the free MiniTool from partitionwizard.com, I delete a partition I don't need anymore and clone the one running in it. PS: PartitionWizard will reboot and clone it unless I copy an other not active partition (previous clone) which can not have been booted yet so "DosDevicesC:" is still absent.3) Now I need to run "bcdboot f:windows /s f:" in a cmd/dos-window or batchfilewhere "f:" is the new created clone. Or use EasyBCD.4) Then I also use the free version of boot-us.com to be able to hide and protect the other not needed clones or original partition when booting and using a clone.
So I don't really need the BCD bootmanager from Windows 7. It gives only more things do to to prepare the cloned partition. I even don't need the "DosDevicesC:" in the registry, because I need to take it out before cloning. Is there a way to skip or delete the BCD and boot into the only not hidden active partition called C:, which will have any other serialnumber?Is there a way to keep "DosDevicesC:" out of the registry or change it after making a clone-copy. Maybe be able to change the registry from a non active partition with a simple batchfile. Or maybe even have "DosDevicesC:" be deleted everytime when windows is booting before it is automaticly been rewritten into the registry with the active partition?
View 2 Replies
View Related
Dec 8, 2012
When I put my computer in hibernation, sometimes when I wake it, it hangs at the user select screen, or it just shows a black screen. Sometimes I can reset the computer after it has hanged, and try again resuming from hibernation, and many times it will work after a couple of tries. Other times after resetting I won't get the prompt to try again with resuming (the other option is to delete hibernation data and reboot the system) but I will get the usual screen that says that Windows was not shut down correctly (with all the options for safe mode, etc). If I cannot resume and I get the screen with safe mode and all the other crap, I finally log in I get a notice that there was a critical error, in the details I see BlueScreen and other data, but I actually never get a blue screen. In the dump folder, there are no dmp files related to the hibernation hanging.
Anyway, when it happens, I see several Event 18 WHEA-Logger in the event viewer, about 6 of them every time.What's weird though, is that I literally have NO problems with this computer other than this. The only times it hangs is when I resume it from hibernation. I can play games or run stress tests with or without overclock and the system is 100% stable. But there is some problem that prevents it from resuming from hibernation correctly, so every time I use it is basically a gamble because it has like 50% chance of working.I tried EVERY SINGLE solution I found with google related to hibernation problems, and it's still there. I even formatted and reinstalled Windows from scratch, and it's still there. I'm positive I updated every single driver for every hardware I have and nope, no solution.I know the WHEA error is related to the hardware but like I said, everything works PERFECTLY once the system starts up properly, or when it resumes from hibernation properly. [code]
View 6 Replies
View Related
Nov 13, 2011
I am trying to get my wife's new computer up and running without any BSOD or program failures. Note that the system was not initially set up to capture the dmp files so all the earliest ones are missing. I presented the initial problems to the original seller who recommended sticking with MSE and uninstalling Norton 360 and I did that. Another forum suggested that Virtual Memory was the problem and I disabled and restored VM. Still having multiple crashes and I am hoping that I can get real help here. I do note that all the crashes have ntoskrnl.exe in the driver stack although sometimes alone and sometimes with other drivers.[CODE]
View 2 Replies
View Related
Feb 13, 2013
We have three medical clinics and the front desk staff float from clinic to clinic depending on their schedule. I only started here a few months ago and I am working on upgrading their Dell xp systems to Windows 7 systems.The problem begins to crop up when say a user named Sally will come in and sit down at this system for the first time.. Well, she needs to login, click on outlook icon, let it find her exchange PST and copy settings to her user profile, then she launches the application for the scanner that she uses to scan in ID's and insurance cards for every patient coming in.. The scanner is set to default settings and needs to be tweaked on color depth and double sided, etc.. Then after that, she needs to launch her Medical EMR application.. and then choose various options in the citrix client, ..TL;DR - Each user needs to spend 20 minutes resetting the defaults at this updated system.
Well this is fine except, I am planning on updating 2 front desk systems at each clinic, the user Sally will need to do all these things EACH time she finds herself sitting down at a system I just swapped out the previous evening.My thought is this, put a single system down in one clinic and let it sit a week giving most of the float users a chance to work on it for a day, setting all of their preferences etc.Once I get a bunch of them with user profiles on the local drive, grab an image of that drive and just deploy that to each system I roll out..Couple issues I am running into:First would be that I would have to register each Windows 7 copy with a new serial, which I have The next issue is, we have a mis-mash of Dell optiplex systems. 330's - 380's even a couple 320's..
View 2 Replies
View Related
Jun 19, 2012
Earlier xp but after win7 the booting not show xp at booting time
View 1 Replies
View Related
Dec 13, 2012
I have been getting a fairly random blue screens and I cannot pin point it myself. I know a bit about diagnosing and repairing issues but this one is just a pain in my butt. I am uploading the dump files and I hope someone can give me a hand I am running a sfc scan right now to test for any problems too. Also got this off the TSG SysInfo Program.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X3 445 Processor, AMD64 Family 16 Model 5 Stepping 3
Processor Count: 3
RAM: 8191 Mb
Graphics Card: NVIDIA GeForce 9600 GT, 512 Mb
Hard Drives: C: Total - 476837 MB, Free - 246483 MB;
Motherboard: BIOSTAR Group, N68S3B
Antivirus: Norton Security Suite, Updated and Enabled
View 5 Replies
View Related
Sep 7, 2012
I have attached a second monitor to my laptop which runs Windows 7, however, I need to set different resolutions for different monitors, because the display does not fit to fill the screen on both monitors.
It is also noted that the display is replicated, and I would like to have the effect of having different desktops e.g. being able to use different applications such as debugging code on one monitor on an IDE such as Visual Studio, and, viewing the browser on the other monitor.
Currently it does not seem possible since the behavior seems to be that the same resolution is replicated on both monitors.
View 2 Replies
View Related
Mar 19, 2012
I use WhoCrashed to analyze these errors but I dont know how to solve. Maybe my hardware cause these.
Processor: Intel Core 2 Quad CPU @ 2.40 Ghz
Ram: 2GB Corsair
OS: Windows 7 Ultimate 32-bit
VGA: ASUS 8600 GTS
Mainboard: ASUS Striker Extreme
View 3 Replies
View Related
Oct 31, 2009
I'm having a bit of trouble trying to get two monitors, a small 1024x768 LCD, and a 46" 1920x1080 TV, to display the same wallpaper at different resolutions. My graphics card is older, a Nvidia Quadro FX 1700, but it is perfectly capable of driving both displays at the same time. It's a minor annoyance, but I'd like to get it working if it's possible.
View 4 Replies
View Related
Jul 10, 2011
I am having a increasingly regular problem with my computer coming out of hibernation.
I rarely turn my computer off & some mornings when I go to wake my computer up from hibernation it simply freezes on a black screen - I then have to power down. When I restart after leaving it off for 10 secs it firstly tries to resume windows which invariably fails. I power down again & sometimes it will start ok, sometimes I have to do a startup repair (I've had to do this 4 or 5 times now) as it won't get past the 'starting windows' window
I thought this may have something to do with the video driver (I can't remember why) so I got the latest version off the net but this doesn't seem to have helped.
View 1 Replies
View Related
Dec 31, 2011
I can't get my PC out of hibernation, some lights come on but the screen is still blank but no amount of key strokes or CTL,ALT,DEL works. I have tried taking battery out unplugging and then pushing power button and holding while unplugged and battery out.
View 1 Replies
View Related
Aug 23, 2012
I don't understand it sometime hibernation will start then all ob a sudden it will stop working and I did change it. Windows 7 32 bite system?
View 1 Replies
View Related
Aug 27, 2009
I have a problem with hibernation on my laptop (HP pavilion 6830). When I want to hibernate, my computer just log out, then the monitor is black and in a few second it displays log in screen with my account. The laptop does not hibernate and does not turn off. I proved it in all power plans but without change. My laptop is dual-boot with opensuse linux.
View 3 Replies
View Related
Jan 27, 2011
For a while now my desktop, running W7 Ultimate, has been resuming itself from hibernation mode for, to me at least, no apparent reason. This seemed to start after installing Google Chrome browser and McAfee anti-virus, both of which have automatic update features. I uninstalled the former and disabled the automatic update of the latter but to no avail.
View 7 Replies
View Related
