This HP system system began to experience bugcheck d1 BSODs back in May (I'm just now getting around to taking a serious look at why). I've run tests on the memory and hard drive, which seem to be OK. Scans with Norton 360 and MBAM turned up nothing scary
View 3 Replies
I just built a new computer for my inlaws and had several BSODs with different bccodes (1, 1a, a). I formatted and reinstalled the OS, updates, as well as clean installs of all recent drivers downloaded from the manufacturer websites. I have had several BSODs after this and I am worried that it may be related to the memory I have installed.
I ran a full disk scan, as well as SeaTools short and long tests. These were all passed with no errors. Also, I have updated the bios to the most recent, reseated ram, unplugged/replugged all sata and power cables inside. Specs are as follows:
Windows 7 Home Premium x64
CPU: AMD Phenom II 555 3.2Ghz Quad Core
Motherboard: Asus M4A785-M onboard sound, video, wired lan
Memory: G.Skill 4GB DDR2-800 (2x2gb) F2-6400CL5D-4GBNT
HDD: Seagate Barracuda 320gb SATA2
Windows 7 . . .
- x64
- the original installed OS on the system? Yes
- an OEM version
- What is the age of system (hardware)? Approx 1 1/2yrs.
- What is the age of OS installation (have you re-installed the OS?) Original install. Approx 1 1/2yrs.
I downloaded and played the Diablo 3 beta for my first time. When I got in game, i noticed that every time I tried to move my character, the game would freeze up like 10 seconds. Because this was happening I tried to restart the game. Turns out that didn't help so i proceeded to trying to restart my computer to see if that would help, but as the screen was at the part where it shows that you are logging off, I got a BSOD. I have gotten BSODs before, and simply had to restart while on them to get the computer to run normally, but this time when I got the BSOD and tried to usual method of restarting, I kept getting BSODs that automatically restarted the computer again in an infinite loop of BSODs. To stop it from automatically restarting after the BSODs, I hit the option to make it not auto restart after the BSOD so I can get a look at what it actually said. I noticed that when i was getting the BSODs, the error messages weren't always the same. Some said things like "SYSTEM_SERVICE_EXCEPTION" and "BAD_POOL_HEADER."I also noticed that the number and letters at the bottom weren't the same with every BSOD. Since I am unable to access to my computer's desktop, I couldn't pull a proper log of the errors so I had so i just went ahead and read some and wrote them down by hand.
View 8 Replies View RelatedI have a client (company) who I've built and connected multiple computers for--all with the same hardware. All but one out of 8 have been great. This last one is causing me hell. I've analyzed the dumps (but I'm a rookie to crash dump examinations), and I originally thought it was a graphics driver issue. I removed the card from device manager, driver swept the drivers, and installed the newest drivers after the re-install of the card. Still two more BSODs (see the last two dumps for that).
Specs:
Windows 7 Pro x64
Original OS
Full Retail version
System is 4 months old
OS installed when system was built
I keep getting BSODs while using my computer.I'm not familiar with software and OS interfaces,I have an HP laptop dv7-1451nr.I have windows 7 ultimate x64. My laptop is around 3-3.5 years old now and I recently reformatted with the windows 7 ultimate OS. My friend look at the hardware for me and we found one RAM stick was bad and took it out so now I'm down to 2GB of RAM. The BSODs seem to happen mainly while I'm either trying to play a game, while those are the most consistent I sometimes get random BSODs doing what I can do right now on this computer.
View 1 Replies View RelatedMy Windows 7 Ultimate X64, on an E6510 pc experiences most the BSOD after it has booted in a morning after being hibernated the night before. The details of the BlueScreen description is:
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7601.2.1.0.256.1
Locale ID:1033
Additional information about the problem:
BCCode:d1
BCP1:0000000000000090
BCP2:0000000000000002
BCP3:0000000000000001
BCP4:FFFFF88002FC2353
OS Version:6_1_7601
Service Pack:1_0
Product:256_1
I recently got another different BlueScreen, with an older not resolved. I got two BCodes, 0x000000c2 and 0x0000005a. I ran 'chk dsk /f' and ' sfc /scannow' and got no errors. Latest BSOD Earlier BSOD
- x86 (32-bit) or x64 ? 64 bit Windows 7 Ultimate
- the original installed OS on the system? Not originally installed. - an OEM or full retail version? Retail. - What is the age of system (hardware)? 2 months. - What is the age of OS installation 2 months. I attached 'Windows_NT6_BSOD_jcgriff2' and 'perfmon.html' below.
I just finished installing Windows 7 Enterprise x86 on someones PC, and installed some drivers and applications.However, I've gotten 2 BSOD's (so far) whilst browsing with Internet Explorer, the computer was not stressed. Another one was during an online ESET Virusscan.I don't quite feel like installing Windows 7 YET again, so any help trying to locate the error and fixing it is much obliged.
Windows 7 Enterprise x86
ASUS P5RD1-V
Ati RADEON X300 Onboard Graphics
I've been having quite a few blue screens lately after installing and playing a few games I bought off the Summer Sale not too long ago, and they seem to be jumping all over the place as to what the issue really is. It was mainly when I would play the game "Saint's Row the Third", which would result in a random BSOD between a few minutes to an hour or so of play, if the game itself didn't crash first for some reason, but I just recently installed TF2 for the first time on this new machine of mine and I've gotten several BSOD a day now as a result. Like... Now I get about 3+ crashes a day, and almost always guaranteed a crash whenever I try to run that game, compared to before where it was isolated to SR3 or the occasional one here or there.I got a message about a .sys file related to Avast! Anti-Virus trying to access memory after it was freed in a BSOD message earlier on, and it improved my stability quite a bit after I uninstalled the whole progam, but I've had a few more crashes since I wiped that out earlier today.
View 1 Replies View RelatedI work at the IT department of a school where we have around 600 PC's that need to be maintained. Most things break by the kids and most is fixed my replacing, or simply imaging said computers again.However, after having switched over from Windows XP to Windows 7 we've been having masses of BSODs when loading Windows. Not just the normal PC's, not just linked to one type (although pretty much everything is from HP). But it keeps happening.The most common errors that we've been able to discover are:0x00000018, 0x0000000A, 0x0000007E, 0x000000BE.After having researched these things, they all turned out to have something to do with drivers, not only that, but when trying to boot into safe mode the PC's would all freeze at "classpnp.sys" and sometimes reboot shortly after.Our current solution is simply putting a new Windows 7 image over the computer and it'll work another day or two. It's great that it works again then, but we spend too much time on it.
It can't possibly be the hardware, there are too many different kinds of computers for it to be that. I'm quite sure the problem is somewhere originating from the drivers we install, but then he question comes as to what ruins the drivers? Not to mention that there are also different drivers for the different kinds of PC's.
Dual Core Windows 7 Pro 64 bit Toshiba laptop. My daughter was working on a Power Point project for school. She went to plug in her flash drive and it didn�t seem to load the drive up. She unplugged it and then plugged it back in. We got a BSOD. We restarted it and it BSOD again. I tried some general troubleshooting, including restoring it to a previous version, and now cannot get into Windows at all. Not even in safe mode. Now I am getting multiple BSODs.
Currently I am seeing these BSODs:
I am getting one when just trying to start and run windows I am getting a BSOD about memory management.
If I try to go into safe mode it loads the files and then I get a BSOD regarding the fbwf.sys. Using the Windows 7 disc I have been able to get to the System Recovery Options. It finds my install and then blue screens with IRQL_NOT_LESS_OR_EQUAL or Driver_IRQL_NOT_LESS_OR_EQUAL even before it gets to finding my install.
Other BSODs I know I have seen are regarding the Ntfs.Sys and PAGE_FAULT_IN_NONPAGED_AREA.
In the last month i got 6-7 random BSODS. My system specifications:
- x64.
- the original installed OS on the system? - YES.
- FULL RETAIL
- 3 years.
- Install date: 11.12.2010
Dual Core Windows 7 Pro 64 bit Toshiba laptop. My daughter was working on a Power Point project for school. She went to plug in her flash drive and it didn't seem to load the drive up. She unplugged it and then plugged it back in. We got a BSOD. We restarted it and it BSOD again. I tried some general troubleshooting, including restoring it to a previous version, and now cannot get into Windows at all. Not even in safe mode. Now I am getting multiple BSODs.
Currently I am seeing these BSODs:
I am getting one when just trying to start and run windows I am getting a BSOD about memory management. If I try to go into safe mode it loads the files and then I get a BSOD regarding the fbwf.sys.
Using the Windows 7 disc I have been able to get to the System Recovery Options. It finds my install and then blue screens with IRQL_NOT_LESS_OR_EQUAL or Driver_IRQL_NOT_LESS_OR_EQUAL even before it gets to finding my install.
Other BSODs I know I have seen are regarding the Ntfs.Sys and PAGE_FAULT_IN_NONPAGED_AREA.
is it possible for me to make another user where I can completely change everything without it affecting my other users? For example the Visual Styles, explorer.exe, etc?
View 2 Replies View RelatedI have a 3 monitor setup, I'd like to use a paneramic or use a different picture for each monitor. IS there a way to do with Windows 7 without any extra programs?
View 9 Replies View RelatedAnyone seen this before or know what causes it? My mom is suffering from it. I did move her default desktop location to her data drive.
Here you can see the properties. The one on the left is the default location one which appears in explorer but shouldn't. The one on the right is the real desktop that I moved to her data drive. 2 copies appear for the one on her data drive.
I have two computers running W7p that I want to access when I'm away from my office. I am able to use remote desktop from inside my home network on either computer. I am able to access one of the computers from outside with my router set to forward global port 3389 to host port 3389. I am guessing that what I need to do is set up two port forwards in my router; the global port will be different but the host port will still be 3389 in each case. Does that sound right? One thing I know is that going into the registry and changing the host port to something other than 3389 does nothing. In fact, if I do that I can no longer use remote desktop inside my home network. I've looked all over the web today and there are not any clear instructions on how to do this (that I could find). I read the Windows 7 forum tutorial.
View 6 Replies View Relatedwhenever I restart my computer, all my desktop icons move around to really weird locations.Here are the specs:
Asus G74SX built-in monitor: 1920x1080
External monitor: Acer X203H, 1600x900
Graphics card: NVIDIA GeForce GTX 560M 3GB VRAM
How to Have a Windows 7 Desktop Slideshow Shuffle Images in Multiple Folders ?
View 0 Replies View RelatedWhen booting system sometimes I hit F9 to select boot device, when I want to boot from dvd or usb. Before you say I can list boot devices in bios I know this, the problem Is UEFI and Legacy my UEFI system is not secure boot and for whatever reason I have to F9 and manually select usb or dvd legacy, some versions of linux will not boot otherwise.
UEFI boot sources:
Windows boot manager
Linux Mint
Linux mint
[Code]....
Over the course of the last year I have dual booted several version of linux, but it seems that linux mint and ubuntu add entries to my UEFI boot sources list...how do I remove them, the list is getting to long, and currently only windows 7 is installed.
Hp Pavillion Slimline s5-1114 Bios version 7.16 Ps other than this annoying list the system boots fine right into windows.
Ist I had a win 7 x64 which ran smooth for over a year (had x32 before that, and some linux variants)..Then I decided to upgrade my pc to win 8 (i had heard from fellow it'ers that the upgrade was much better than previous versions so i thought why not give it a go)..It was a disaster, my pc kept freezing on me sometimes even before i had one program open.If it went in sleep -> oh yeah freeze OR actually going to sleep but not being able to wake up.After some weeks in that hell, i did a clean install..Better,it seemed, but not much and not for long.After more cold rebooting my pc in a month than in the 2 or 3 years I've had it I decided to put win7 x64 back on..You can imagine my horror when I noticed that (although being WAAAY less severe) even my win7 started freezing on me.I even had my boot menu (3 times orso) and my post (1 or 2 times) freeze on me, so I'm suspecting maybe some HW issues.Often I had corrupted ntfs system after one of these agressive shutdowns,which were solved by autorepair next boot.
I ran chkdsk,hdd diag,memtest86..All came back clean.In windows i used advanced driver updater (because i was sick of doing it all manually) so ALL the drivers were up to date, even sata controllers,chipset,...
Also, I don't know if it matters but when freezing my pointer dissappears very often (90% of the time). I attached the win8dump files and evt logs in the win7 file, the more info the better no? (Yes writing this from a win7 os cause it freezes less)
I am trying to get my wife's new computer up and running without any BSOD or program failures. Note that the system was not initially set up to capture the dmp files so all the earliest ones are missing. I presented the initial problems to the original seller who recommended sticking with MSE and uninstalling Norton 360 and I did that. Another forum suggested that Virtual Memory was the problem and I disabled and restored VM. Still having multiple crashes and I am hoping that I can get real help here. I do note that all the crashes have ntoskrnl.exe in the driver stack although sometimes alone and sometimes with other drivers.[CODE]
View 2 Replies View RelatedWe have three medical clinics and the front desk staff float from clinic to clinic depending on their schedule. I only started here a few months ago and I am working on upgrading their Dell xp systems to Windows 7 systems.The problem begins to crop up when say a user named Sally will come in and sit down at this system for the first time.. Well, she needs to login, click on outlook icon, let it find her exchange PST and copy settings to her user profile, then she launches the application for the scanner that she uses to scan in ID's and insurance cards for every patient coming in.. The scanner is set to default settings and needs to be tweaked on color depth and double sided, etc.. Then after that, she needs to launch her Medical EMR application.. and then choose various options in the citrix client, ..TL;DR - Each user needs to spend 20 minutes resetting the defaults at this updated system.
Well this is fine except, I am planning on updating 2 front desk systems at each clinic, the user Sally will need to do all these things EACH time she finds herself sitting down at a system I just swapped out the previous evening.My thought is this, put a single system down in one clinic and let it sit a week giving most of the float users a chance to work on it for a day, setting all of their preferences etc.Once I get a bunch of them with user profiles on the local drive, grab an image of that drive and just deploy that to each system I roll out..Couple issues I am running into:First would be that I would have to register each Windows 7 copy with a new serial, which I have The next issue is, we have a mis-mash of Dell optiplex systems. 330's - 380's even a couple 320's..
I have been getting a fairly random blue screens and I cannot pin point it myself. I know a bit about diagnosing and repairing issues but this one is just a pain in my butt. I am uploading the dump files and I hope someone can give me a hand I am running a sfc scan right now to test for any problems too. Also got this off the TSG SysInfo Program.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X3 445 Processor, AMD64 Family 16 Model 5 Stepping 3
Processor Count: 3
RAM: 8191 Mb
Graphics Card: NVIDIA GeForce 9600 GT, 512 Mb
Hard Drives: C: Total - 476837 MB, Free - 246483 MB;
Motherboard: BIOSTAR Group, N68S3B
Antivirus: Norton Security Suite, Updated and Enabled
I have attached a second monitor to my laptop which runs Windows 7, however, I need to set different resolutions for different monitors, because the display does not fit to fill the screen on both monitors.
It is also noted that the display is replicated, and I would like to have the effect of having different desktops e.g. being able to use different applications such as debugging code on one monitor on an IDE such as Visual Studio, and, viewing the browser on the other monitor.
Currently it does not seem possible since the behavior seems to be that the same resolution is replicated on both monitors.
I use WhoCrashed to analyze these errors but I dont know how to solve. Maybe my hardware cause these.
Processor: Intel Core 2 Quad CPU @ 2.40 Ghz
Ram: 2GB Corsair
OS: Windows 7 Ultimate 32-bit
VGA: ASUS 8600 GTS
Mainboard: ASUS Striker Extreme
I'm having a bit of trouble trying to get two monitors, a small 1024x768 LCD, and a 46" 1920x1080 TV, to display the same wallpaper at different resolutions. My graphics card is older, a Nvidia Quadro FX 1700, but it is perfectly capable of driving both displays at the same time. It's a minor annoyance, but I'd like to get it working if it's possible.
View 4 Replies View RelatedI have been having multiple BSOD issues mostly using IE:
-Used memtest86 for 9 passes - no issues
-Ran sfc scannow (had to do it in safe mode) - no issues
I thought I had all my problems worked out. This is not the case. My computer was working fine. I installed most of my programs, surfin the web, doing what I do on my computers. So I shut it down for the night.
I turn it on the next day. BSOD. The first BSOD doesn't even have an error listed.
This BSOD happens a couple times.
Then I get a different BSOD saying APC_INDEX_MISMATCH. This one only shows up one time.
Then I get another saying SYSTEM_SERVICE_EXCEPTION. But I've already rolled back my ATI drivers to their original state. I try to run chkdsk /f but everytime the computer restarts it just goes back to the log in window, without running chkdsk.
I'm completely lost here. Where should I start?
I have an HP Elitebook 2530p with Windows 7 Professional 64-bit, and I keep getting a BSOD with the error message "DRIVER_IRQL_NOT_LESS_OR_EQUAL".
The first thing I did was do a memory and hard drive test. Unfortunately, both came up clean. Then I updated my sound, video, networking, webcam, extra button drivers and BIOS. Still getting them.
Any other solutions I should try or information I should provide?
