[INSTALL] Windows 7 Install Errors?
Apr 23, 2011
so I'm trying to install windows 7 again. I got a virus for some reason, I couldn't start up my PC anymore. So I formatted everything in the windows 7 installation(you know before the installation begins). There is nothing left of my old files. So after windows expanded the files it's starting to install the features, but then I get some error saying: could not set the offline locale information Error code 0x80FF000. After that I get a lot of errors saying that files are corrupt and that I have to run checkdisk utility. I don't know how ts me how to run that without having windows on your PC.The windows 7 dvd is fine, because I used it before on the very same computer and it worked. Only this time I'm getti
View 4 Replies
ADVERTISEMENT
Feb 22, 2010
I bought Windows 7 Ultimate which comes with the 32bit and 64bit dvd's. Right now I have the Windows 7 RC1 32bit installed but as we all know its gonna start acting up in March since it will start to expire.As the computer boots up with the dvd in the drive, all works fine until it starts asking for the dvd drivers. Yes, my drive is IDE. Not SATA. Do I really have to go buy a SATA cabled dvd drive to install windows 7? Second, is the fact that I have a 32 bit OS now, affecting the fact that it can't find the drivers? Is it because it's looking for 64 bit drivers when I have a 32 bit os now? I've already read up on this issue for the dvd drivers and it seems it was coming up alot even before the RTM versions and it seemed that redownloading an ISO was the solution aside from getting a SATA drive. But, I didn't download my copy. I have a real disc. I've already tried switching in the BIOS where my drive is set to RAID and moving it to IDE and then to the other option on there and no luck so far on getting it installed.
View 9 Replies
View Related
Mar 2, 2012
I have recently built a computer with the following components:
Asus 990fx Sabertooth motherboard
Zambezi 6-core Am3+ cpu
16 gb g-skill ram
180 Gb SSD
1 TB 7200 rpm HDD
2 MSI GT 560's
Every time I go to install Windows 7 it seem to be getting a different error. It will get to various stages of the install (ex, i can click on the language settings and the install button and then crash, or it will get to expanding files and crash, or it wont even get to the language settings page) The BIOS runs fine and recognizes my RAM and my CPU. How I can install windows 7.
View 8 Replies
View Related
Aug 20, 2012
I just recently contracted a virus and opted to reformat 2 of my 3 hard drives (the 3rd was used to store documents and backups form the other 2) After reformat/install everything seemed fine until I proceeded to re-install several of my games.
Borderlands installed and proceeded to give me an error that one of the physX .dlls was missing. I managed to find the dll and get it re-installed but then another physXextensions.dll was missing which I was not able to fix, but the game itself works and plays fine.
Then I re-installed Alpha Protocol (worked fine) proceeded to install the 1.1 update and found a missing nxcooking.dll was missing (fixed and then found another)
At this point I found 2 different programs that scanned my registry and dlls and each found approximately 150 errors. Therefore I am planning to reformat all 3 drives and re-install again
View 2 Replies
View Related
Oct 26, 2011
I am building a budgetpc. I bought new in box an AMD X3 450 and a asus m4a78lt-mle mobo, and 4gb of DDR3 1333mhz memory Kingston. First off out of the box the processor posts as a amd x4 b50. Not sure if they packaged the wrong one or the mobo is reading wrong. I don't want to pull the cpu fan back off tok read the cpu. I did a clean install of Windows 7 ultimate. After install finished I went to install drivers, well the mobo drivers cd was not in the mobobox so I planned on installing usb wireless nic and downloading drivers. This is where the problem starts.
When I click on the exe install file I get, a cmd box popup that says program to big to fit into memory. So I cant install any drivers, I downloaded alla the mobo drivers from asus on a thumb drive and copied over to the hard drive. Tried to run those files and i get the same error message. So I reinstalled Windows 7 this time the 64bit version and this time i still get the same error but on other exe files I get a message saying that they are not 64 bit files. Even though I downloaded the 64bit version. So I am not sure what is up. All parts were new in box.
View 1 Replies
View Related
Mar 14, 2011
Tried pretty much everything apart from a format, which is looking like a good option.The readiness tool produces the following error and no fix ont he net has resolved this issue so far. Renaming Software Distribution folder - NopeMicrosoft Fix it - NopeRe registering windows dll files - NopeNothing works same old thing and this is a the ISO off the website / WSUS update or a exe file. Windows 7 32bit Prof[CODE]
View 9 Replies
View Related
Aug 19, 2012
System Spec:
Intel Core i5-3570k
Asus P8Z77-Pro M/b
16GB DDR3 1600MHz RAM (2x8)
2x2TB 7200RPM, 64MB cache HDD's
1x500GB 7200RPM HDD
nVidia GeForce 8800GTS
Creative SoundBlaster Xtreme Gamer sound card
Linksys WMP600N wireless PCI card
Corsair HX650 PSU
1x Blu-Ray optical drive
1x DVD optical drive
This is a new computer build that I finished a few days ago. I've updated the BIOS, set up a RAID 1 configuration through Intel Rapid Storage Technology/through the BIOS. I installed Windows 7 x64 Ultimate and have begun to migrate my programs and data over from my previous machine. This process has been paused because I am experiencing BSOD. There are two which have occurred:
0x0000001a - MEMORY_MANAGEMENT
0x00000050 - PAGE_FAULT_IN_NON_PAGED_AREA
I ran a Windows Memory Diagnostic test overnight - no problems were found. I've updated all my drivers. I have followed the BSOD posting instructions and SF Diag Tool instructions, and also googled effortlessly regarding these Stop codes.
View 1 Replies
View Related
Jun 22, 2012
when i open a command prompt with admin priv and type in sfc/scannow it comes back with the mess windows resource found errors and cant fix them, WTF even on a clean install with no apps installed just the windows update the computer goes thru when doing a clean install. Go to check if i still get errors and what do you know im still getting errors on a clean install.
View 1 Replies
View Related
Feb 13, 2013
I am getting an error "cannot install" 0x80070714 when I try to install windows 7 into a clean disk and the installation just stops..
View 3 Replies
View Related
Apr 6, 2012
After I tried to make a dual boot with Ubuntu and Windows 7 Ultimate (64-bit), Windows now does not boot. I have tried to reinstall and repair the HDD but the disc fails to recognize my HDD (Western Digital Scorpio Black 500 GB). My HDD is Basic, has 3 primary partitions and 1 extended (3 logical). Ubuntu 11.10 can boot fine.
View 2 Replies
View Related
Feb 20, 2011
Per microsoft I need to do try a repair install from original disk. Is there a difference between running repair install from Windows or booting from original disk then selecting upgrade install? Is one or the other preferred? Directions say both attempt to preserve installed programs, but not all drivers, and both require reinstalling all the 60 or so windows updates released after my disk. so no differences there.
View 9 Replies
View Related
Jan 2, 2011
I've built a brand new PC and decided that I would like to install windows 7 64 bit on my SSD, I got a disk+key from my university before christmas so that'd i'd be ready once i'd built it.
I built the PC yesterday and realised that I'd left my external DVD drive at my university accommodation, I'm at my parents house for christmas break so that's a few weeks left. I can't really wait that long so I used my parents laptop (which I'm posting from now) to turn the disk into an .iso and use the microsoft USB utility to make a USB stick that i could install from.
However when I tried the install gets to 'installing features' and gives 'windows cannot install required files' error code 0x80070570 I looked the code up on google which sent me to a lot of threads here, so far I've tried:
Taking all but 1 stick of ram out and the graphics card. Reseting the bios to default Installing again without rebooting after error. using cmd to select the right partition
View 4 Replies
View Related
Sep 7, 2012
First off this is a newly built computer, all fresh components. aftercleaning/activating the hdd via shift +f10 at Windows 7 setup,(which took me a day to figure out) i was very excited to see my hdd available for Windows 7 installation. as i proceed windows does its thing, after installing its time for the first restart. it restarts right back to the initial windows 7 setup ive done a lot of research, and majority of the problems seem to be the boot priority in bios. so i made sure that it was usb-hdd, then hard drive. (Windows 7 on flash drive for me, no dvd burner available). still the same thing, right back to initial setup. i tried maybe to remove the flash drive during the 10 second countdown to restart, but when it restarts, the windows splash screen comes up and then blue screens and restarts real quick. cant see what the error is on bsodthere have been a couple different start up issues, "windows did not start properly" "select version of windows to start from" (or something to that effect.) but its all the same outcome. windows 7 just wont finish installation
View 3 Replies
View Related
Jan 30, 2012
I'm working on a re-install of all components following a complete corruption of the boot sector on my drive which could not be fixed with repairs. The last time I installed everything fresh, I had no issues. Between then and now, there have been no hardware changes on my system, but now I am having issues installing the IDT Codecs. I keep getting an error along the following lines: Quote: ExitError: Error=Device Object not present, restart the system and run setup again. Running under compatibility mode, and running drivers from both the motherboard CD and the manufacturer website both have the same effect. The CD, when booted, says "This OS not support!" and only contains 32-bit vista codecs. ECS' website download indicates the IDT drivers as being compatible with Windows 7. Both do not work. It is almost as if the hardware "disappeared," despite the fact that I was using the drivers quite successfully till just 2 days ago, when the boot sector went kaput.
Windows has installed its own default set, which do nothing to power the 8mm jacks which I use with my speakers, but instead put sound through the HDMI, which is useless because I use a dedicated graphics card. I have tried uninstalling this codec and re-installing IDT, to no effect. Windows replaces with its own default codec.I have referenced this thread here, but offered solutions do not seem to work for me: Intel IDT Audio Driver will not install
View 5 Replies
View Related
Nov 24, 2011
How do I install a Super Multi Drive to a mini computer HP 110? I have the device and the installation disk, however, the computer does not seem to be detecting it or providing an installation wizard for me to proceed.
View 3 Replies
View Related
Feb 3, 2010
Does anyone know whether there is a difference in performance between doing a clean install of Windows 7 vs upgrading Vista? Any better stability? I'm just wondering whether it's worth the trouble of the clean install.
View 3 Replies
View Related
May 28, 2012
NT Kernel & System rises to top of list in task manager and then just totally stops installs from proceeding. I have fought NT Kernel & System on 3 computers running Win 7 x64 ever since Win 7 has been out. No one yet that I know of has been able to solve the issue. I now need to install Java and can't because of NT Kernel & System stops it. I have tried everything on every forum and sites l find with Google searches. Nothing has worked yet.
View 2 Replies
View Related
Feb 6, 2013
Install LG Super multi drive install disc for windows
View 1 Replies
View Related
Feb 13, 2013
I am part of a large organization that has a large amount of computers on our domain controller. I have Administrative rights to the computers only, and network access rights on our network. I keep a number of computers up to date, including various 3rd-party programs (i.e. java, flash, etc), and I currently manually remotely connect to each computer and install the updates to the programs from a network share, then run Windows update, select all the critical updates (as well as all the applicable optional updates), then disconnect and move on to the next one. Needless to say, time quickly adds up.
View 3 Replies
View Related
Jun 7, 2011
you will need VISTA install disc and a windows 7 install disk..first upgrade XP to vista then upgrade XP to windows 7
View 1 Replies
View Related
Jun 29, 2010
I have seen a lot on clean installs but all guides are from like 2009. Is clean install still a way to install windows 7 with upgrade disc on a new hdd? since i have a hdd with vista on it and i have the licence how do i install 7 with the licence and a black hdd?
View 9 Replies
View Related
Jan 9, 2012
I get as far as connecting USB - Windows acknowledges the connection but then never finishes the installation. Downloading and installing a driver from HP site didn't help.Know that I had originally following HP's instructions and attempted install w/o CD and with the printer USB connected during first installation. This failed same as all subsequent installs. I'm also running XP mode on this machine but had not started XP at the time of printer install.
View 7 Replies
View Related
Sep 14, 2012
I now have a laptop running windows 7 and cannot find driver or a fix or a patch to connect my 'old' HP Laserjet 1012 printer.
View 1 Replies
View Related
Jan 10, 2011
I have recently finished building my computer and brought a copy of windows 7 (home premium) 64bit to go with it. But when I try to install I never get past "collecting information" where I am being asked to "Select A Driver To Install" as a driver for my "DVD Device" is missing (apparently). I assumed that the driver I needed would be on my motherboard driver disk. I clicked the disk and told it to "rescan" and it only said "There's no device drivers were found. Make sure that the installation media contains the correct drivers". When I navigate directly to the sata,raid & ide drivers sometimes I get a: nVidia nForce Serial ATA Controller on the screen but when I click on that it says the same thing after about 10 seconds or tells me it cannot install and I need to get a new driver from my distributor (I have tried the drivers of the Asus website but the same result). What do I do?
PC:
AMD Phemon X4 965 @ 3.4ghz (black edition)
2gb RAM
250gb HD (sata)
DVD-ROM (IDE)
Note: it's brand new and doesn't have an existing windows installation.
View 4 Replies
View Related
Jan 10, 2012
During the installation process of Windows 7 it is possible to load drivers, e.g. the downloaded SATA, LAN and Graphics drivers for a specific motherboard (MoBo ASUS P7P55D).However, these files are compressed zip files and Unzipping delivers a set of folders with in each a number of files. Which are the device drivers?
View 9 Replies
View Related
Aug 30, 2010
I plan on reformatting Windows 7 x64 due to some hardware issues. Basically, I would like to be able to have things like Windows 7 settings, themes, ect imported. Any tips on how to do this? I do have separate partitions/harddrives to backup files, program data, ect.
View 5 Replies
View Related
Dec 28, 2010
My Acer 7736Z-4809 laptop (pre-installed w/ Windows 7 Home Premium 64bit, so I don't have the Windows 7 CD) was recently hit with a virus. I constantly got the BSOD "iaStor.sys" and a black screen. Startup Repair at first couldn't complete repair, but when I tried again, it found no errors. Tried System Restore to no avail. Was able to do a System Image Recovery using a backup on an external HD, but none of the programs worked (wanted to use Ad-Aware and Spybot to eliminate the virus). When I clicked on programs on the desktop or Start menu, nothing happened, didn't even get an "Open with." Even in Safe Mode, none of the programs worked. I checked the Task Mgr, and explorer.exe was still there, but RAID wasn't. Went to Control Panel Programs to uninstall/repair programs, but got message that programs seemed to be already uninstalled...it was like the programs weren't even recognized. Once in awhile when I clicked on IE8 in Windows Explorer (not via desktop shortcut or Start menu), IE8 actually opened, so I downloaded Hijack This and Avast anti-virus, but when I tried to install them, I got the msg: "Installation must be on a local hard drive."
Continued to get the "iaStor.sys" BSOD. I read to run Verifier and disable it, so I tried that (not sure if that made things worse). Tried to do another System Image Recovery, but this time it couldn't recognize the backup on the ext HD. Tried Startup Repair, and it couldn't complete repair. Went to Recovery Management to reset the OS, but my User ID(?) couldn't be found. Decided to do a Factory Install - during "Setup is preparing your computer for first use" I got the error msg: "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click 'OK' to restart the computer, and then restart the installation." Every time I try to restart it, I get the same error msg.
View 9 Replies
View Related
Jul 5, 2012
I have an OLD computer with a 2.4 GHz processor and 1 GB ram, running XP 32 bit. I wanted to upgrade to Windows 7, So I tried to install 32 bit windows 7, knowing my computer couldn't handle 64 bit. However, at the end, it simply told me "Installation Failed" and reverted to XP, with all my files. I tried multiple times, then I tried installing 64 bit windows 7, and surprisingly, it worked. However, it is laggy beyond belief, so I tried installing 32 bit again. Again the installation failed. Now I'm thinking of reverting BACK to XP.
View 1 Replies
View Related
Nov 22, 2012
i cannot do anything with my laptop it restarted unexpectedly during install and i tried a windows 8 install but no hdd found what can i do?
View 9 Replies
View Related
Jan 31, 2010
I'm an IT student who got a free Win 7 x64 disk from my school, and I am unable to do a clean install. My system specs are as follows:
Intel Core 2 Duo 3.12 Ghz
nVidia GeForce 9800 GTX 512 MB PCI-e
320 GB Western Digital HD SATA
1 Gb DDR2 1066 MHz and 2x2Gb DDR2 1066 MHz SDRAM
I set my boot sequence to boot from DVD-ROM drive first, and HD second. It goes to the "Windows is loading files" screen and gets hung up. I started the process and went to watch TV for an hour, and it is still on the "Windows is loading files" screen. I haven't gotten any error messages. I've unplugged all USB devices from my computer as I have seen on this forum that it has worked for some people.
edited to add: I originally had only 2 Gb of RAM, and it got hung up at the "Windows is loading files" screen. I thought it was getting hung up because I didn't have enough RAM, so I bought brand new 2 sticks of 2 Gb RAM. I took out one of the 1 Gb sticks and placed both of the 2 Gb of RAM...for a total of 5 Gigs. And, it is still doing the same thing.
View 9 Replies
View Related
Apr 21, 2011
im having a hard time with fixing my computer's view how can i get it back?
View 2 Replies
View Related
