when i open a command prompt with admin priv and type in sfc/scannow it comes back with the mess windows resource found errors and cant fix them, WTF even on a clean install with no apps installed just the windows update the computer goes thru when doing a clean install. Go to check if i still get errors and what do you know im still getting errors on a clean install.
View 1 Replies
After running sfc/scannow, no matter how many times I run it, I continuously receive the same error(s).sfc/scannow Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection found corrupt files but was unable to fix some of them.
Details are included in the CBS.log windir\Logs\CBS\CBS.log. For example...Here is the portion of the CBS.log giving me the errors:2011-07-25 19:14:27, Info CSI 000002e4 [SR] Verify complete
2011-07-25 19:14:27, Info CSI 000002e5 [SR] Repairing 4 components
[code]....
Recently I had an issue with Chrome (which is now solved), But during solving the error I done an SFC Scan as it was a windows .DLL that was reporting to be in error and the scan found a few files that were un-repairable.I also downloaded a Windows 7 Installation Disc from Digital River; Here.After extracting the required files from the .iso files with 7-Zip, I changed the ownership of them and 'Moved and Replaced' the old files with the new files.
These are the files I replaced;
autochk.exe
blbres.dll
netcfgx.dll.mui
icardres.dll
winshfhc.dll
I then re-booted in safe mode with CMD Prompt and re-scanned with SFC, but the same files are reporting they are in error. Are they important? Is there another way to repair them? I am running Windows 7 Home Premium, I have attached the most recent SFC Scan.
I bought my daughter a laptop. I dont have a windows 7 disc as windows 7 came already installed. However yesterday when she turned laptop off to have her tea and when she went back to use it. We noticed that after the windows logo had appeared the screen stayed black we could move the mouse but that was about it. I put the laptop into safe mode and checked for viruses malware and trojans, also tried a system restore but that didn't seem to do anything and found nothing suspicious.
Also did the sfc /scannow no errors reported. I read that you could get into the Task manager and stop the explore.exe and add a new one and start it again. This however I cannot try as I cant get past the windows logo screen.. So in a nut shell here's what ive tried and failed at doing..
1- Startup repair
2- System restore
3- (Via Safemode) checking for viruses, malware, trojans.
4- (Vie Safemode) updated to latest Graphic Driver
5- Tried this >> Windows 7 Black Screen Of Death Fix << did its job but after reboot went back to black screen
6- Removed battery and pressed power button for 30 - 60 seconds (to no avail)
I've installed Windows 7 Full version 3 times now but all of my old files are still on the computer. I used 'custom install' as I read that this would wipe everything...but it didn't. ???
My pc is choc-a-block full of rubbish and I want it all gone without having to go through deleting it all manually..I've been able to wipe everything with previous windows installs so I can't understand why it doesn't work with Windows7.
Also, I have 2 partitions on my hard drive (the other has Linux on it)...I'd like to go back to just having the one & installing windows7 over everything...does anyone know how I can do this.
I bought an HP desktop about 2 years ago with vista 64 bit on it and it has been crappy ever since. I've had problems with programs not being recognized, things not installing at all when they should, and it freezing up for no good reason. Anyway, I went out and bought Windows 7 ultimate the full version. I saved the few files I have on a jump drive and I want to completely wipe out the hard drive and install windows 7 and start from scratch.
View 9 Replies View RelatedI installed two new 120GB SSD drives into my system. Previously, I had two 1TB drives in a RAID 0. After doing a performance test to see if there was a speed increase, I also bound the two new 120Gb SSDs into a NEW RAID 0.The idea was to use the new, faster array for windows, and whatever programs I am currently using, and then use the old array for storage. I could install windows on the new drives with So, I proceeded to install Windows 7 on the new array, leaving the old array alone. Installation went without a hitch. I looked at my new drive under My Computer- 1.98 TB. NOT the 240GB partition I just made, and NOT the 1.74 TB partition I used before the new drives.It, for some reason I cant fathom, combined all 4 drives, encompassing BOTH arrays, new and old HDD and SSD into one partition, and had installed windows OVER TOP OF ALL MY DATA.I dont know WHY this happened, but what do I do now to get my data back? I tried starting the computer without the new array, but it wont boot. I need my data back, and I need to get windows installed on the new array, the way I wanted.
View 4 Replies View RelatedI bought a Toshiba Satellite L500-20Z, and it does not tell me which version I am running, ( 32or64 ) though I know it IS x64. The in-store shpeil said it was equipped with Win 7 Home premium 64bit, with 32bit recovery partition.
Question 1 - is there any way to tell between 32 or 64 (apart from a "Program Files (x64)" folder on my C: drive), and
Question 2 - how do I tell what build I have? (the above link says nothing)
Question 3 - how to tell if the recovery is 64 and not just 32 without wiping my existing install?
(I suppose I could take an image of my current C: drive and use that instead of the recovery partition if disaster strikes.... only trouble is with OEM theres so much bloat and crap that's incluided...)
I plan on reformatting Windows 7 x64 due to some hardware issues. Basically, I would like to be able to have things like Windows 7 settings, themes, ect imported. Any tips on how to do this? I do have separate partitions/harddrives to backup files, program data, ect.
View 5 Replies View RelatedMy work machine's HDD is on its way out. It currently has XP Pro x86 on it. I got a fresh new HDD and upgrade version of Win7 x64 Pro.
I booted from the Win7 x64 disc, it went through its whole install thing on the new HDD, and then when it got to the product key, it wouldn't accept the one that came in the box. I read on the web that upgrade versions must have XP or Vista already installed for it to work.
But, the 7 documentation says I have to do a Custom install if I'm upgrading from XP. A custom installation deletes whatever is on the partition, I think. So how can it work when upgrading from XP?
I have actually gone back and installed XP on the new HDD (that had its own share of problems, couldn't even get the internet connection working), and now trying to do a custom installation of 7 again. When it gets to the product key section, should I put in my original XP product key? Or will the 7 product key work this time?
A couple months ago i bought my computer, it came with no windows 7 discs. How would i go about putting a fresh install of windows 7 on it?
View 12 Replies View RelatedSo I will be doing a new install of win7 pro x64 on my newly built rig. My questions should i go ahead and do the install and then install SP1 or install, get updates and wait until SP1 is pushed.I have a disk with the full SP1.
View 3 Replies View RelatedI have been getting bsods recently at first it was only when trying to play BF3 i couldnt play for more than 5 min before bsod. now its moving its way into normal functions.i will include a dx diag and cpu z .txt file Here are the reports from the time frame i recieved the bsod. Iwill also include the one i got last night before i gave up.Let me know if there is anything else I should include
Log Name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 3/20/2012 4:21:37 PM
Event ID: 1001
Task Category: None
[code]....
I had a lot of trouble with blue screens on this system (as per profile) with a previous installation too, but never got round to dealing with it properly. So now, it's a less than week old installation that I've put very few things on yet, but crashes a *lot* when I try to run games. Does blue screen outside of this, just not as much.
The error codes vary, but most common is IRQL_LESS_OR_NOT_EQUAL.
installing Windows 7 ultimate upgrade version on fresh install with new hardware right now. i will b checking this every few min.
View 9 Replies View RelatedI'm just wondering how to do a fresh install of windows 7, as it keeps freezing lately, ive tried system restore but keeps coming up that it hasn't done it...so id rather re-install from scratch again so ive got nothing on my system...Any help would be appreciated
View 3 Replies View RelatedI am getting an SSD drive & going to be doing a fresh install of Windows 7. While I understand the process of configuring your system for usage of the drive (unplug the other drives so the SSD is only one connected while installing, turning off prefetch, etc).The part I'm confused with is how to move the users folder so it defaults to the "D" drive. I get I can "Move" the folder, Add the "Location" or do the "robocopy" method & create a junction.
View 1 Replies View RelatedA new Samsung 840 pro SSD is on it's way with the courier and I will remove my present OCZ and will install a fresh Windows 7 pro. At present I have the SSD divided in 2 partitions C:system and D:Programs my first question regards the opportunity to keep the 2 partitions: is it good or bad for the SSD?
1) make an iso of partition D:programs
2) remove OCZ econnect the Samsung SSD
3) Check Uefi bios if AHCI is marked
4) Install 7 on C: (automatic alignment od the SSD)
5) Create partition D:
??Optimize?? Is it better to do it at this stage? Or after having installed various programs? I think at this stage but would appreciate your suggestions including what sort of optimization is advisable. I could eventually use RT7.Then I would copy from the iso all the programs on their own place D: and from the various distribution files will make the various setup (just for the programs to be registered in the Registry)
FInally got an SSD! Now I just need to install it onto an SSD.. could someone give me an explanation on that? My motherboard is the Asrock Z77 Extreme 4. I am currently running Windows 8 (I will update 7 to this later on down again) on a regular hard drive (slow 5400 RPM Samsung HD)
View 2 Replies View RelatedI've just made a new fresh install of Windows 7 - 64bits (legal version). Everything was fine, all drivers were up to date.But, when I install updates from Windows Update, during the installation of the SP1 (when the screen is "do not turn off the computer"), the computer reboots, and it said that it occurs a BSOD !? I've seen nothing. According to Whocrashed, it's because of BAD_POOL_HEADER, from ntoskrnl.exe (which belongs to Nvidia I think) and e1c62x64.sys (for Intel LAN)... After reboot, Windows continues slowly its updates like everything was OK... but I wonder is that SP1 & updates have been compromised (poorly done, half or what) 'cause of this BSOD? Should I reformat the computer?Windows Update indicates that all these updates were successful...
View 2 Replies View RelatedAfter reading other posts I ran miniToolBoxThis is really annoying as it is a brand new PC[CODE]
View 4 Replies View RelatedI wiped it clean from issues of locking up. I have done 3 fresh installs of Windows 7 Ultimate 64 bit retail using all up to date drivers and everything, I have tried with CPU overclocked and normal clock. When I boot up she runs fine and then when I start listening to music off of my backup drive or browse the internet she will lock up at random, and by lock up I mean it is like im looking at a picture of my screen frozen with no responsiveness whatsoever not even the mouse moving no HDD activity ... nothing! So Ive installed the OS 3 TIMES fresh install new partitions format etc. It does it every time after I let windows update do its thing or just listen to music off the backup drive.pecs are:Windows 7 Ultimate x64 RetailBiostar A780XA2-03 Socket AM2+ MotherboardAMD Athlon 64 X2 3800 CPU4GB Ram - I have swapped sticks that I have had - ( 4 1gb sticks 533mhz)
View 1 Replies View Relatedmy computer is about 2 years old. It first came with Windows vista 64. A few months ago I got a hold of a copy of windows 7 pro 32, so I wanted to check it out, even If I was going to take a hit on ram. Well now I have Windows 7 Ultimate 64, but after doing a fresh install I kept getting BSOD after the windows logo. I was able to complete the setup after removing all my ram except for one stick. The same problem persists after setup. I can boot up in safe mode just fine with all of my ram.
[code]...
This PC has ran fine since 2008 when it was built. It was recently updated to Windows 7 Pro OEM. During the OS upgrade it had more memory added (4x2GB, all slots filled). Upgrade and install went flawlessly. All software (photoshop, premiere, firefox, antivirus) was re-installed without any errors or hick-ups. Upon updating firefox (I believe the timing was co-incidence) it Blue Screened. It has had issues ever since. So my last stitch effort was to back everything up and re-install Windows and hope that it fixed the problem. Needless to say that it hasn't been fixed and it still randomly blue screens. Windows Memory Diagnostic ran with no errors returned
View 3 Replies View RelatedBought a new computer 2 weeks ago, came in 3 days ago. Been having trouble with it since. Usually I'm the "Mr. Fix-it" when it comes to PC's but I've never messed around with any debugging tools.
I've tried all the troubleshooting you can possibly do when trying to diagnose a blue screen of death. Tried both RAM sticks separately, took the video card out and used on-board video. I even tried both RAM sticks with on-board video separately. Unplugged the DVD-ROM, no avail. I called ASRock and got a technician who I could barely understand, but was telling me something about "XMP". I didn't see the XMP option under the DRAM configuration, even if my sticks don't support it wouldn't the option still be there? I think he has my motherboard confused with another one. He told me to either replace the RAM with new RAM or send the motherboard back in and exchange it.
I came here to see what the BSoD DMP files REALLY have to say the problem is, so I can solve it once and for all. I didn't pay for new hardware to let it sit here and collect dust.
SPECS: Nothing is OC'd except the GPU, it was OC'd straight from the factory
MOBO: ASRock Z68 Extreme3 Gen3 @ P1.30 (latest BIOS update)
CPU: Intel Core i5 2500 Sandy Bridge @ 3.30ghz
RAM: GSkill RIPJAWS 2x4gb DDR3 1333
GPU: MSI 560 GTX-TI Twin Frozr ii 2gb
PSU: Corsair TX750W
HDD: 1TB Samsung SATAII @ 3gb/sec
DVD-ROM: ASUS SATA DVD-ROM
OS: Windows 7 Ultimate 64bit RETAIL
Ive ran memtest86 4.0a and i found several million errors. So i scanned through 1 and 1 ramslot to try to determine which ram was giving the errors, this only resulted in 1 of my 4 ram had only 1 error? I found this weird so i thought it might be the DIMM thats corrupted.
So now i removed 3 of my rams and i only run with 1 which passed the test. Still i get unexpected shutdowns aka BSOD.
Ive tried to remove my SSD and only use my HDD back and forth , changing to IDE inside BIOS, but with no good results at all..
Ive also tried to change my PSU to a different brand, but all volts seems ok.
I also reinstalled windows with USB, CD, from HDD yeah you name it, different versions... etc.. i even tried to install Windows 8 but with the same result
This all actually just started out of the blue, i have no clue how but i didnt install anything , all of the sudden i started having connection problems which resulted in BSOD.
I installed Windows 7 64-bit on my Dell XPS l501x and managed to find most of the drivers, but still have a couple of annoying little issues. Windows no longer tells me when my battery is nearly dead, it just dies when it's empty. Before the full restore I would be warned twice and then it would hibernate to give me a chance to find a plug. I still have one Unknown Device in device manager and I have no idea what it could possibly be as things generally seem to be running smoothly.Is there any way I can find out what this is?
View 5 Replies View RelatedSo my XPS caught fire and my mom gave me her old computer as she got a new one.i threw some good parts from my XPS into this Dimention 8400 so it has better specs to run windows 7.3GB of ram and my X800XT radeon videocard and the 3.0GHz HT 64 bit processorNow i installed windows 7 32 bit ultimate from my XPS and it takes 20 seconds to get to the logon screen, but after that once you log in the "Loading" screen takes 3-6 mins along with once the desktop shows up it takes another 5 mins or so to even press the start button and bring the start menu up, 45 seconds to 2 mins to bring the internet up and this is a FRESH install, as of like....20 mins from this post it finished installing. not even activated yet
View 9 Replies View RelatedThey used to have more of a 'restore disk' but lately I haven't been seeing that anymore. What are users left to do when you need to do a fresh install of Windows? If its for someone else, could I use my windows install disc and use their product key (sticker on bottom)? I've heard that it doesn't always work that way? Does Microsoft have any official documentation about this and if possible, could you share your experiences?
View 6 Replies View RelatedI'm putting together a HTPC using a ASUS E35M1-I Deluxe (AMD Zacate mobo/cpu combo), 30GB Kingston SSD, and 4Gb Crucial DDR3 1066.Problem is when I boot from the Windows install disk I get the "Windows is Loading Files" status bar but when it gets the end it just hangs there. Usually it boots right into the next Windows loading screen. So before I start troubleshooting I want to make sure there's nothing special I need to do with the SSD before installing Windows. Its a brand new drive but I'm pretty certain during the installation process there's a Format option. The Windows install disk was burned from an ISO using IMG Burn at 16x. Before I left for work I started another burn (with img verification) at 8x. But I'm not certain that will help. I've burned plenty of images at 16x speeds without issue.
View 7 Replies View RelatedA few days ago, all out of the blue, my PC started to freeze - at that time with VISTA installed. I tried to restart and it froze again, just after a couple of minutes. Tried again, again, again and again. With the same result. Without getting any further I tried to install Windows 7 to get my PC up and running again. Formatted all of partitions to get a fresh and clean start. and it froze again, within a couple of minutes. Now I suspect it may be caused by a hardware problem? What is there to do? What can I do? I`m far from a PC-expert, I HP is somewhere between 1-3 years old I think, and I`ve never encountered this problem before, on this PC or any other.
View 9 Replies View Related
