SFC/scannow - Errors Detected - But Unable To Fix
Jul 25, 2011
After running sfc/scannow, no matter how many times I run it, I continuously receive the same error(s).sfc/scannow Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection found corrupt files but was unable to fix some of them.
Details are included in the CBS.log windir\Logs\CBS\CBS.log. For example...Here is the portion of the CBS.log giving me the errors:2011-07-25 19:14:27, Info CSI 000002e4 [SR] Verify complete
2011-07-25 19:14:27, Info CSI 000002e5 [SR] Repairing 4 components
[code]....
View 8 Replies
ADVERTISEMENT
Nov 2, 2012
Recently I had an issue with Chrome (which is now solved), But during solving the error I done an SFC Scan as it was a windows .DLL that was reporting to be in error and the scan found a few files that were un-repairable.I also downloaded a Windows 7 Installation Disc from Digital River; Here.After extracting the required files from the .iso files with 7-Zip, I changed the ownership of them and 'Moved and Replaced' the old files with the new files.
These are the files I replaced;
autochk.exe
blbres.dll
netcfgx.dll.mui
icardres.dll
winshfhc.dll
I then re-booted in safe mode with CMD Prompt and re-scanned with SFC, but the same files are reporting they are in error. Are they important? Is there another way to repair them? I am running Windows 7 Home Premium, I have attached the most recent SFC Scan.
View 3 Replies
View Related
Jun 11, 2010
I bought my daughter a laptop. I dont have a windows 7 disc as windows 7 came already installed. However yesterday when she turned laptop off to have her tea and when she went back to use it. We noticed that after the windows logo had appeared the screen stayed black we could move the mouse but that was about it. I put the laptop into safe mode and checked for viruses malware and trojans, also tried a system restore but that didn't seem to do anything and found nothing suspicious.
Also did the sfc /scannow no errors reported. I read that you could get into the Task manager and stop the explore.exe and add a new one and start it again. This however I cannot try as I cant get past the windows logo screen.. So in a nut shell here's what ive tried and failed at doing..
1- Startup repair
2- System restore
3- (Via Safemode) checking for viruses, malware, trojans.
4- (Vie Safemode) updated to latest Graphic Driver
5- Tried this >> Windows 7 Black Screen Of Death Fix << did its job but after reboot went back to black screen
6- Removed battery and pressed power button for 30 - 60 seconds (to no avail)
View 4 Replies
View Related
Jun 22, 2012
when i open a command prompt with admin priv and type in sfc/scannow it comes back with the mess windows resource found errors and cant fix them, WTF even on a clean install with no apps installed just the windows update the computer goes thru when doing a clean install. Go to check if i still get errors and what do you know im still getting errors on a clean install.
View 1 Replies
View Related
Oct 19, 2012
i keep geting this poping up on scan my speed is dead shoud be at 16Mbs , its at 157kbs it slowing every thing i think . i have a new modem router a netcom nb604n
View 3 Replies
View Related
Jul 1, 2012
I've been trying for the past two days to re-install windows 7. It would work fine if I had more disk space available which is my problem. I have 74.5GB's available on my laptop, but unable to get more than 3GB clear at a time, and I need about 7GB's to reinstall my windows 7.When I try to shrink the partition, it tells me to run a chkdsk. I've ran chkdsk several times but it always stops at 9% and gives me an error.
View 5 Replies
View Related
Aug 26, 2012
As you may see I am connected to the internet but I cannot see the signal bars on the taskbar.my laptop information:Toshiba Satelite M645 S4070Windows 7 Home Premium. 64-bitI also cannot do a system restore of the check disk error i am seeing.below is an image of the results:[CODE]
View 2 Replies
View Related
Nov 19, 2012
I am trying to run sfc/scannow but something seems not ok. Here is the log from C:WindowsLogsCBScbs.log latest time i started it[CODE]
View 2 Replies
View Related
Feb 1, 2009
I have just run the sfc /scannow command, just to see what the result would be.
If you've ported Windows Mail over from Vista like I have, then the scannow command returns the Windows Mail folders back to the default installation settings.
Windows Mail will no longer run.
I had to boot into Vista and copy the program files folder from Vista to Win 7 to re enable Windows Mail. The Windows Mail program store in app data remains unchanged.
View 3 Replies
View Related
Apr 29, 2011
I have Win7x64Ulti -Dell OEM I auto installed Sp1 in a moment of weakness (gave in to the pain of Windows 7).I have problems with some programs around com+ and VSS, notably Casper, but others as well so I ran sfc /scannow.Only one file shows up as a problem and Win says "cannot repair - source file corrupt". It is the windowssystem32catsvrut.dll, a com+ library.
Message follows:Cannot repair member file [l:24{12}]"catsrvut.dll" of Microsoft-Windows-COM-ComPlus-Runtime-QFE-CATSRVUT-COMSVCS, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch The attempted source is the winsxs folder.The 7600 would be pre SP1 if I read that right, so of course it cannot repair.So - I check the last disk image I had of this disk and in fact that file size and dttm is the same in the indicated winsxs folder but different in system32. I get that system32 is a secure dir/file and I cannot just copy/paste. But how to fix this is stumping me.
Weird part - I'm having trouble finding the actual file because of how Windows 7 uses Winsxs to dynamically link these files to the OS depending upon 32 or 64 bit access. I'm guessing there is a junction or symbolic link involved, because in Win explorer the file is correct size and date, in DOS it is correct size and date but when I run superfinder it shows all files with this name and system32 has wrong size and date.So it appears system32catsrvut.dll has a problem, and it further appears that the source to repair is from a pre-SP1 image in this library.I can't repair (OEM to SP1).I can't seem to copy the dll from the backup image.How do I get a valid copy of the dll? Or even tell if it is invalid?
View 7 Replies
View Related
Dec 18, 2011
I was having problems with my wallpaper (couldn't change it) after fresh instalation of windows and I found a solution on somewhere on the interent. (I had to delate one file). But they also said I could do scannow using cmd.exe. So I did it.[CODE]
View 2 Replies
View Related
Nov 19, 2012
I am trying to run sfc/scannow but something seems not ok. Here is the log from C:WindowsLogsCBScbs.log. Latest time I started it.
Code:
2012-11-19 14:24:52, Info CSI 00000055 [SR] Verifying 100 (0x00000064) components
2012-11-19 14:24:52, Info CSI 00000056 [SR] Beginning Verify and Repair transaction
2012-11-19 14:24:54, Info CSI 00000057 Repair results created:
POQ 13 starts: 0: Move File: Source =
[Code] ......
View 5 Replies
View Related
Feb 20, 2012
I have run sfc/scannow in win 7, and have followed instructions to run sfc at boot in command prompt, but nothing has solved the errors. i have saved the file sfcdetails.txt to desktop, and have extracted only the problematic parts and saved it in another file problems.txt kindly check the file, as i have attached it here.
all the files are either .inf or with .nlp extensions.windows is running fine. but i want to get rid of the problems before they become a serious issue. I have a pre-installed OEM version of win 7 basic SP 1, and i have a HP G6-1117TX laptop. There is a drive named "System", which is the active and boot-able partition, and is not the same drive where windows is installed.
View 5 Replies
View Related
Jan 19, 2011
I had a bsod randomly and decided to run a /sfc scannow. It found 1(2?) problem files
2011-01-19 00:44:56, Info CSI 000002ac [SR] Could not reproject corrupted file [ml:60{30},l:58{29}]"??C:WindowsSysWOW64en-US"[l:28{14}]"iassdo.dll.mui"; source file in store is also corrupted
2011-01-19 00:45:50, Info CSI 000002fc [SR] Could not reproject corrupted file [ml:60{30},l:58{29}]"??C:WindowsSysWOW64en-US"[l:28{14}]"iassdo.dll.mui"; source file in store is also corrupted
iassdo.dll.mui a 6kb file found in the syswow64en-us folder.I tired extracting file from my win7 disk however it still keeps the error on rescan. I was wondering if someone could upload the file so I could try that, dont want to do a full repair install for one file.there's 2 files with the name iassdo.dll.mui, the problem ones are the 6kb not the 45kb file.
View 17 Replies
View Related
Jan 18, 2009
How to Repair Windows 7 System Files with System File Checker ?
View 0 Replies
View Related
Oct 11, 2012
I recently got some work done on my machine at a "PC fixit" store. It was unbootable due to an encryption issue that I had created, so as part of the service, they loaded Ultimate on it. When I got the machine back, it worked fine, but I couldn't shut it down without holding down the power button (would always reboot). I still don't have any issues with my machine, but when I run scannow (many times) I get errors about seemingly important files, but I can't tell if I have cause for concern, or what the next steps should be, since I don't have any way to replace the corrupted files. I would prefer not to have the OS reloaded.
View 6 Replies
View Related
Nov 20, 2012
In the beginning of the year I got the infamous malware that infected many PC's worldwide (can't remember the name) and got my action center completely destroyed. I eventually fixed it, by adding the Security Center service that was gone, but one issue still remains: the action center system tray icon is greyed out, and impossible to turn back on!
I searched online, and the most common solution I've found was to run the sfc /scannow command. So I did, and for some reason it stops at 69% and after about a minute stuck at that number it says: "Windows Resource Protection could not perform the requested operation" I tried multiple times, but the same error happens every time. How can I fix this error, without re-installing the OS? Or is this only solved that way?
View 3 Replies
View Related
Apr 30, 2012
i get a windows error randomly when i search my folders. To my knowledge the errors started happening about a week ago when my comp shut off by accident. The folder crashes then it says windows is searching for a solution, then it restarts and no solution is ever found. I find this error in win explorer. Also a program i run guitar pro 6 is completely crashes, even tried reinstalling to no avail thats how i know its a windows error. I have no restore points for whatever reason so that cant work, dont wanna reload or upgrade, i tried sfc/scannow and it says it was unable to fix it and couldnt proceed. help please this is very annoying i need my program back. I need to replace the damaged files.
View 1 Replies
View Related
Jul 11, 2011
Specs:
Windows 7 home prem
64 bit
Running sfc /scannow as administrator. scannow stops at 64% EVERY time. I've run chkdsk. . no errors. Have not run in safe mode. Never had to before.First received: err msg from "window command processor" Then received err msg "Windows resource protection could not perform the requested operation." Received this 3 times in a row.I have run scannow successfully in the past without issue. This is a first.
View 3 Replies
View Related
May 27, 2012
my partners windows 7 laptop has this problem and I am stuck. it is a Dell laptop latitude E4300 about 4G ram, no external devices fitted. Laptop starts to boot, I log in, "welcome" screen comes up but never finishes processing. Harddrive light keeps on pumping endlessly. I tried to boot in "safe mode" and it stops at exactly the same spot. I tried to run �System restore�: I can pick a restore point OK, and it loads it but then gets stuck on �finishing restore� (similar to the �welcome screen� thing - it just keeps on processing ) �Start up repair� both from harddrive or dvd both say it cant find anything wrong. Ran the command prompt. �Sfc /scannow� it runs �beginning verification phase of system scan� � it gets to �Verification 100%� then displays the line : �windows resource protection could not perform the requested operation�
View 9 Replies
View Related
Feb 28, 2012
i have new flopy drive when i m formatting its showing the error that windows is unable to format the drive
View 1 Replies
View Related
Jun 29, 2011
do not detected dvd rom in compaq laptop in windows7
View 4 Replies
View Related
Aug 30, 2011
i have a 320gb hdd,first it was quite well when i inserted in my laptop it is easily detected now i dont know what happen it cant be detected?
View 2 Replies
View Related
Jan 24, 2011
my computer is acer aspire 3630.i have windows 7 32 bit os.my philips dvd drive is now not detected by my computer.when i was installing a game,beause of low battery,my computer shutted down.when i started it again,my dvd drive is not detected.it is not showing in the device manager and bios manager.what shall i do.
View 9 Replies
View Related
Jan 26, 2012
I am using Micromax 300c EVDO modem ( Datacard ) for wireless broadband connection. In one machine having Intel 915 Chipset motherboard, it is working fine. In the device manager, in the modem category, it shows correctly as " CDMA 2000 Rev A Modem ". In another machine, having Intel DG41TY motherboard, the device manager does not show modem. Only in other devices category, shows as Data services. ( in ports category both diagnostic and service ports are shown correctly)
View 4 Replies
View Related
Apr 14, 2012
I have a Toshiba Satelite C650 (PSC12C-00M00S) with Core i3. Previously it came with 4 GB RAM. It had previously 2GB + 2GB. What I did, I bought two 4GB RAM modules and replaced them with these two. I have Windows 7 Professional 64 Bit; But the problem is it is still showing 4GB in the System Properties. I did check the RAM slots, but they seem to be fine.
View 2 Replies
View Related
Apr 23, 2012
OK so this is with my sisters laptop, everything was apparently fine one day & not working the next.I've read it may be a driver issue & have re-installed the correct (I think) driver version, but this hasn't fixed the problem.
View 1 Replies
View Related
May 25, 2011
I Have a internal CDRW CED-8080B it appears as CD ROM Drive in the my Computer Section. Why is it not appearing as CDRW Drive?
It does Function Opens CD etc but when i try to burn i get an error.i did use a Windows 7 Trouble shooter and i said i could not burn with the drive i was then told that the Drive did not have Burning Capabilities.I Have Burn a CD In Win XP before i upgraded to Windows 7 i dont know why Windows 7 is not detecting it and only classes it as CDROM.
Driver Name: CDROM.SYS
View 5 Replies
View Related
Jul 5, 2011
So I just moved to a new school which uses ACER TRAVELMATE 6293 as their laptops. When they first gave it to me they put a brand new battery in it and they gave me the wrong charger, greeeat, but I went back and got the correct one.Now, the laptop DOES charge. When I turn it on, it displays the battery icon with the charging icon over it if that makes sense, however it has a red cross over it and if you hover over that it says "no battery is detected". So you have no idea how long it has left to charge and so on. BUT if you take out the charger, the laptop will not turn on (as if the battery is flat, but surely it cant be because it has charged for 24 hrs.)Usually, I would just go to the IT guys/girls at school but seeing as they keep stuffing up and it is school holidays, I am hoping you kind and smart people have a solution. I have tried to get any dust out of the charger port/hole thing. And have also taken out and re-inserted the battery twice. This is driving me a bit stupid as I have homework to do. So just to make things clear, the laptop works completely find when connected to the charger except for what I said before. Oh and this is happens when I am on either the home or school image. And it runs on windows 7 of course
View 7 Replies
View Related
Nov 1, 2009
just purchased a Gateway P7902h Laptop on the 30th - it came with 64 bit vista and I decided to upgrade the OS to Windows 7 (64x as well).
Ever since the install the laptop has been unable to detect my graphics card, a Geforce GTX 260M. Every time I open a driver installation program (Gateway site only has the drivers for Vista 64x so I tried those, then the Windows 7 64x ones from the Nvidia website.) I get a 'could not locate any drivers that are compatible with your hardware' error.
Looking through the Device Manager under Display Adapters, it only has the Standard VGA Graphics Adapter and not the actual card itself. Can anyone help?
View 9 Replies
View Related
Dec 7, 2009
I'm running into this and issue and I can't peg down a cause. I recently updated my Vista HTPC to Windows 7. When booting up I can get into the OS, but the screen goes black shortly after.
I have tried two monitors: the Panasonic plasma just goes black and when I try Samsung Syncmaster LCD it looks like it's searching for digital, then analog sources.
I have an Nvidia 8400 GS card and I've tried both the 191.07 and 195.62 drivers. I've also let Windows install the drivers after uninstalling the Display Adapter in Device Manager in Safe Mode.
When I start in Safe Mode I cannot recreate the issue. I tried uninstalling/reinstalling the drivers in Safe Mode.
View 7 Replies
View Related
