I am trying to run sfc/scannow but something seems not ok. Here is the log from C:WindowsLogsCBScbs.log. Latest time I started it.
Code:
2012-11-19 14:24:52, Info CSI 00000055 [SR] Verifying 100 (0x00000064) components
2012-11-19 14:24:52, Info CSI 00000056 [SR] Beginning Verify and Repair transaction
2012-11-19 14:24:54, Info CSI 00000057 Repair results created:
POQ 13 starts: 0: Move File: Source =
[Code] ......
In the beginning of the year I got the infamous malware that infected many PC's worldwide (can't remember the name) and got my action center completely destroyed. I eventually fixed it, by adding the Security Center service that was gone, but one issue still remains: the action center system tray icon is greyed out, and impossible to turn back on!
I searched online, and the most common solution I've found was to run the sfc /scannow command. So I did, and for some reason it stops at 69% and after about a minute stuck at that number it says: "Windows Resource Protection could not perform the requested operation" I tried multiple times, but the same error happens every time. How can I fix this error, without re-installing the OS? Or is this only solved that way?
I am trying to run sfc/scannow but something seems not ok. Here is the log from C:WindowsLogsCBScbs.log latest time i started it[CODE]
View 2 Replies View RelatedI have just run the sfc /scannow command, just to see what the result would be.
If you've ported Windows Mail over from Vista like I have, then the scannow command returns the Windows Mail folders back to the default installation settings.
Windows Mail will no longer run.
I had to boot into Vista and copy the program files folder from Vista to Win 7 to re enable Windows Mail. The Windows Mail program store in app data remains unchanged.
I have Win7x64Ulti -Dell OEM I auto installed Sp1 in a moment of weakness (gave in to the pain of Windows 7).I have problems with some programs around com+ and VSS, notably Casper, but others as well so I ran sfc /scannow.Only one file shows up as a problem and Win says "cannot repair - source file corrupt". It is the windowssystem32catsvrut.dll, a com+ library.
Message follows:Cannot repair member file [l:24{12}]"catsrvut.dll" of Microsoft-Windows-COM-ComPlus-Runtime-QFE-CATSRVUT-COMSVCS, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch The attempted source is the winsxs folder.The 7600 would be pre SP1 if I read that right, so of course it cannot repair.So - I check the last disk image I had of this disk and in fact that file size and dttm is the same in the indicated winsxs folder but different in system32. I get that system32 is a secure dir/file and I cannot just copy/paste. But how to fix this is stumping me.
Weird part - I'm having trouble finding the actual file because of how Windows 7 uses Winsxs to dynamically link these files to the OS depending upon 32 or 64 bit access. I'm guessing there is a junction or symbolic link involved, because in Win explorer the file is correct size and date, in DOS it is correct size and date but when I run superfinder it shows all files with this name and system32 has wrong size and date.So it appears system32catsrvut.dll has a problem, and it further appears that the source to repair is from a pre-SP1 image in this library.I can't repair (OEM to SP1).I can't seem to copy the dll from the backup image.How do I get a valid copy of the dll? Or even tell if it is invalid?
I was having problems with my wallpaper (couldn't change it) after fresh instalation of windows and I found a solution on somewhere on the interent. (I had to delate one file). But they also said I could do scannow using cmd.exe. So I did it.[CODE]
View 2 Replies View RelatedI have run sfc/scannow in win 7, and have followed instructions to run sfc at boot in command prompt, but nothing has solved the errors. i have saved the file sfcdetails.txt to desktop, and have extracted only the problematic parts and saved it in another file problems.txt kindly check the file, as i have attached it here.
all the files are either .inf or with .nlp extensions.windows is running fine. but i want to get rid of the problems before they become a serious issue. I have a pre-installed OEM version of win 7 basic SP 1, and i have a HP G6-1117TX laptop. There is a drive named "System", which is the active and boot-able partition, and is not the same drive where windows is installed.
After running sfc/scannow, no matter how many times I run it, I continuously receive the same error(s).sfc/scannow Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection found corrupt files but was unable to fix some of them.
Details are included in the CBS.log windir\Logs\CBS\CBS.log. For example...Here is the portion of the CBS.log giving me the errors:2011-07-25 19:14:27, Info CSI 000002e4 [SR] Verify complete
2011-07-25 19:14:27, Info CSI 000002e5 [SR] Repairing 4 components
[code]....
I had a bsod randomly and decided to run a /sfc scannow. It found 1(2?) problem files
2011-01-19 00:44:56, Info CSI 000002ac [SR] Could not reproject corrupted file [ml:60{30},l:58{29}]"??C:WindowsSysWOW64en-US"[l:28{14}]"iassdo.dll.mui"; source file in store is also corrupted
2011-01-19 00:45:50, Info CSI 000002fc [SR] Could not reproject corrupted file [ml:60{30},l:58{29}]"??C:WindowsSysWOW64en-US"[l:28{14}]"iassdo.dll.mui"; source file in store is also corrupted
iassdo.dll.mui a 6kb file found in the syswow64en-us folder.I tired extracting file from my win7 disk however it still keeps the error on rescan. I was wondering if someone could upload the file so I could try that, dont want to do a full repair install for one file.there's 2 files with the name iassdo.dll.mui, the problem ones are the 6kb not the 45kb file.
Recently I had an issue with Chrome (which is now solved), But during solving the error I done an SFC Scan as it was a windows .DLL that was reporting to be in error and the scan found a few files that were un-repairable.I also downloaded a Windows 7 Installation Disc from Digital River; Here.After extracting the required files from the .iso files with 7-Zip, I changed the ownership of them and 'Moved and Replaced' the old files with the new files.
These are the files I replaced;
autochk.exe
blbres.dll
netcfgx.dll.mui
icardres.dll
winshfhc.dll
I then re-booted in safe mode with CMD Prompt and re-scanned with SFC, but the same files are reporting they are in error. Are they important? Is there another way to repair them? I am running Windows 7 Home Premium, I have attached the most recent SFC Scan.
How to Repair Windows 7 System Files with System File Checker ?
View 0 Replies View RelatedI bought my daughter a laptop. I dont have a windows 7 disc as windows 7 came already installed. However yesterday when she turned laptop off to have her tea and when she went back to use it. We noticed that after the windows logo had appeared the screen stayed black we could move the mouse but that was about it. I put the laptop into safe mode and checked for viruses malware and trojans, also tried a system restore but that didn't seem to do anything and found nothing suspicious.
Also did the sfc /scannow no errors reported. I read that you could get into the Task manager and stop the explore.exe and add a new one and start it again. This however I cannot try as I cant get past the windows logo screen.. So in a nut shell here's what ive tried and failed at doing..
1- Startup repair
2- System restore
3- (Via Safemode) checking for viruses, malware, trojans.
4- (Vie Safemode) updated to latest Graphic Driver
5- Tried this >> Windows 7 Black Screen Of Death Fix << did its job but after reboot went back to black screen
6- Removed battery and pressed power button for 30 - 60 seconds (to no avail)
when i open a command prompt with admin priv and type in sfc/scannow it comes back with the mess windows resource found errors and cant fix them, WTF even on a clean install with no apps installed just the windows update the computer goes thru when doing a clean install. Go to check if i still get errors and what do you know im still getting errors on a clean install.
View 1 Replies View RelatedI recently got some work done on my machine at a "PC fixit" store. It was unbootable due to an encryption issue that I had created, so as part of the service, they loaded Ultimate on it. When I got the machine back, it worked fine, but I couldn't shut it down without holding down the power button (would always reboot). I still don't have any issues with my machine, but when I run scannow (many times) I get errors about seemingly important files, but I can't tell if I have cause for concern, or what the next steps should be, since I don't have any way to replace the corrupted files. I would prefer not to have the OS reloaded.
View 6 Replies View Relatedi get a windows error randomly when i search my folders. To my knowledge the errors started happening about a week ago when my comp shut off by accident. The folder crashes then it says windows is searching for a solution, then it restarts and no solution is ever found. I find this error in win explorer. Also a program i run guitar pro 6 is completely crashes, even tried reinstalling to no avail thats how i know its a windows error. I have no restore points for whatever reason so that cant work, dont wanna reload or upgrade, i tried sfc/scannow and it says it was unable to fix it and couldnt proceed. help please this is very annoying i need my program back. I need to replace the damaged files.
View 1 Replies View RelatedI am currently using 54% of my ram somehow. I think I have a lot of useless programs and files, is there any software that cleans out my pc..? I got 6gb ram (1333mhz).
View 3 Replies View RelatedI have an issue with my mouse, when I move it, it causes a CPU spike, in resource monitor, it calls the spike "system interrupt". I recently installed windows 7 and it has been this way since the beginning. Interestingly, when I click and drag, it becomes around 100% cpu usage. My idle cpu is 1-3%.
View 1 Replies View RelatedBut all of a sudden my computer just start using 100% cpu constantly. like it never goes down to an idle percentage. It is really getting annoying with the fan super fast and loud.
View 3 Replies View RelatedOut of nothing my CPU run at 100% and explorer was using 98%. I had to end task my explorer each time I try to delete files from desktop or when I refresh my desktop. I tried few ways including clean reboot (only system files running), clear temp data using ccleaner, scan using online scanner and vundofix (both didn't found any virus/trojan).
This is Hijackthis log :
Log file of Trend Micro HijackThis v2.0.4
Scan saved at 8:32:10 PM, on 2/19/2012
Platform: Windows 7 SP1 (WinNT 6.00.3505)
MSIE: Internet Explorer v9.00 (9.00.8112.16421)
Boot mode: Normal
[Log] .....
My computer is running all the time over 50%. AMD 4x, W764, 2x hd 1 tb, ram 8 gb. MS Office, CS5, acrobat, pinnacle, etc. I have Avast and MS Defender. I have made twice online scanning with Fsecure and AVG. I have made weekly scanning with System Mechanic, CCleaner, Adware and Spybot. Nothing serious found ever.This problem came when I changed the system hd (C:) 40 Gb -> 1000 Gb and reinstalled W7. Now the Hd (C:) runs all the time, but what? I stopped all Adobe programs (Photoshop / Acrobat) and this decreased cpu usage to about 40-60%. When only 2 services was running (Avast and CatalystContrCentr) cpu runs still too much 10-30%. I made a repair W7 installation, but nothing better.
View 4 Replies View Relatedi can press 1 2 3 4 5 6 7 8 9 0 ! @ # $ ^ & * ( )But i cant type the percent sign.5 works but the percent sign doesn't nothing show up when i do shift+5.i am the keyboard on English united stated US no other keyboard layout.i dont Type it alot.i cant still do alt + 0037 % but i want shift +5....
View 8 Replies View RelatedSome days ago I noticed after a couple of minutes I start mi PC, my CPU usage goes to a constant 100% , so I checked for viruses and such but MSE gave me nothing and neither Malwarebytes. Here's the weird thing, I checked the Task Manager to see witch process was causing this and it's always a different process (Sometimes MsMpEng.exe, sometimes dwm.exe and even taskmgr.exe itself) so I started killing processes like a maniac leaving just the few essential ones but nothing changed. I also stopped all the services with a delayed start, since the problem starts after a couple of minutes but the problem was still there. My system restore is disabled.
View 1 Replies View RelatedComputer has been running slow, so this is what I come across: the Memory is Pegged at almost 100% usage. I've got 4 gigs and this is what it looks like right after startup. I also went into Norton and checked it and apparently my Ram has been like this almost for a month. (I got an SSD and did a clean install and it appears to have run ok for a few days and then you can see its pegged out.
View 5 Replies View RelatedI am trying to get my websites to open at 150% but have been unable to find a way to do that so far. How I can do this?
View 6 Replies View RelatedSpecs:
Windows 7 home prem
64 bit
Running sfc /scannow as administrator. scannow stops at 64% EVERY time. I've run chkdsk. . no errors. Have not run in safe mode. Never had to before.First received: err msg from "window command processor" Then received err msg "Windows resource protection could not perform the requested operation." Received this 3 times in a row.I have run scannow successfully in the past without issue. This is a first.
When idle, my cpu usage is around 20%, which is allot more than it should be in my opinion. Whenever I start a game, Battlefield : Bad Company 2 which is the game I've been playing allot lately, my cpu usage doesnt come down from the 90's %. It just stays there and it often goes to 99% and stays there, once again. I've been running the game at a 20 fps average. When I could run games like far cry 2, cod mw , nfs shift and so on with settings on high with an average of 40 fps.
View 9 Replies View RelatedI just bought a new Dell Studio laptop with Windows 7 installed. At the bottom right of the IE 8 explorer window is a number (change zoom level). I like it set at 125% and to stay at that number. Whenever I am working in my email on IE, the number will change on its own and I have to set back to 125%. Is there a way to set this number ar 125% an have it stay at that number?
View 4 Replies View RelatedI've reinstall my Windows 7. But now i don't know the reason why my CPU always show that 100% CPU, even when starting! I've found that in window task manager there are three processes: cmd.exe, cmd.exe*32 and again,cmd.exe, (I don't run them) and if I end them CPU usage will be normal.
View 2 Replies View RelatedI have an HP G62 laptop and it has been running wonderfully for a year, it is a farely new computer. Then last week it was been running terrible slow due to the physical memory being almost 95% used. I have an i5 processor and 3GB of RAM and all i use this for is for school, I have all microsoft tools (word, powerpoint, etc.) and I don't game on this computer. I have been deleting unnecessary programs and defragmenting but it hasn't seemed to change anything. I have Norton 360 and i dont think I have a virus, or maybe i do??? My computer takes extremely long amounts of time to open internet explorer, itunes, or anything.
View 3 Replies View RelatedWhen I try to backup my desktop, it gets to 42% and it stops, I have tried several times, it's a new computer, my 1st backup went smooth, but now I can't get it to finish.
View 2 Replies View RelatedEach time I start Windows update, the % doesn't go above 0 and looks like it always stays paused. Why does this happen?
View 4 Replies View Related