SFC / Scannow Reports 6 MUI Source Files Corrupted In Store
Oct 11, 2012
I recently got some work done on my machine at a "PC fixit" store. It was unbootable due to an encryption issue that I had created, so as part of the service, they loaded Ultimate on it. When I got the machine back, it worked fine, but I couldn't shut it down without holding down the power button (would always reboot). I still don't have any issues with my machine, but when I run scannow (many times) I get errors about seemingly important files, but I can't tell if I have cause for concern, or what the next steps should be, since I don't have any way to replace the corrupted files. I would prefer not to have the OS reloaded.
View 6 Replies
ADVERTISEMENT
Jun 3, 2011
After recently downloading the service pack, I've had issues with my computer, including the themes service not working. I want to uninstall the pack so that I can do a system repair using my disc because my disc is older than the service pack. However, the service pack doesn't show up on the programs list. If I try to uninstall by looking at windows update or the command prompt I get an error message that says:
Installer encountered an error: 0x80073712
The component store has been corrupted.
I have already done a sfc file checker thing through the command prompt, and it said that some files were corrupted, and I couldn't access the log (access denied). I'm currently running the 64 bit version of Windows 7 Home Premium. I obtained the log from the sfc scan. [URL]
View 8 Replies
View Related
Dec 18, 2011
I was having problems with my wallpaper (couldn't change it) after fresh instalation of windows and I found a solution on somewhere on the interent. (I had to delate one file). But they also said I could do scannow using cmd.exe. So I did it.[CODE]
View 2 Replies
View Related
Feb 20, 2012
I have run sfc/scannow in win 7, and have followed instructions to run sfc at boot in command prompt, but nothing has solved the errors. i have saved the file sfcdetails.txt to desktop, and have extracted only the problematic parts and saved it in another file problems.txt kindly check the file, as i have attached it here.
all the files are either .inf or with .nlp extensions.windows is running fine. but i want to get rid of the problems before they become a serious issue. I have a pre-installed OEM version of win 7 basic SP 1, and i have a HP G6-1117TX laptop. There is a drive named "System", which is the active and boot-able partition, and is not the same drive where windows is installed.
View 5 Replies
View Related
Apr 30, 2012
i get a windows error randomly when i search my folders. To my knowledge the errors started happening about a week ago when my comp shut off by accident. The folder crashes then it says windows is searching for a solution, then it restarts and no solution is ever found. I find this error in win explorer. Also a program i run guitar pro 6 is completely crashes, even tried reinstalling to no avail thats how i know its a windows error. I have no restore points for whatever reason so that cant work, dont wanna reload or upgrade, i tried sfc/scannow and it says it was unable to fix it and couldnt proceed. help please this is very annoying i need my program back. I need to replace the damaged files.
View 1 Replies
View Related
Jan 14, 2012
Is it possible to connect a drive to my WiFi router so that all WiFi devices could access the drive to store and share data i.e. Photo's, downloads, music etc?
Devices consist of netbooks (Windows 7) and android tablets and android phones.
View 3 Replies
View Related
Nov 13, 2009
I'm using DVD Shrink to make iso's from DVD's and I've noticed that my ISO files are being stored in the VirtualStore folder. The file is fine and I can burn it back to DVD w/ no issues just strange how it doesn't store it in my root c: directory.
View 9 Replies
View Related
Jun 15, 2011
I had a hd go out on me. So I order a new 1.5 tb hd and install win 7 fresh on it. When I try to access my old hd it just states it has drive I with no info and ask to be formatted before used. I want to recover my old files off of it.
View 2 Replies
View Related
Jul 6, 2011
I've moved tons of files to an external hard drive [Samsung external USB HD (FAT32)]. After that, I've tried to eject the device in Windows 7, via Safely Remove Hardware but Windows said that the device was in use, even though everything (applications and windows) were closed. I decided to use USB Safely Remove software to eject my portable HD. I really don't know if that was the problem, but since then I found a lot of folders inside my external HD corrupted.
In the corrupted folders, JPG files looks like this. I can't read the other files (PDFs and PSD) in those folders, Adobe Reader and Photoshop says that the file is damaged. I've tried Windows 7 error-checking but the files are still corrupted.
View 5 Replies
View Related
Feb 22, 2012
i'm using an hp laptop with windows 7 home basic 64 bit . i have a big problem in downloading files . whenever i download any file from the internet with any extension and try to open it , it says "file is corrupt" . also , while playing a Internet video , it stops playing suddenly , although the grey tape ( that shows the downloaded part of the video) is full . i tried many different browsers , also i tried downloading Internet videos using real player , it always doesn't work.
View 1 Replies
View Related
Dec 9, 2011
I have a bigger problem now... I had a lot of restarts since a unknown problem appeared (what makes my windows freeze + restart all the time). Beacuse I restart my computer each day when he freezes, i have now problems like files and folders being corrupted and inaccessible. Can't access a folder or open program. It even says that some .exe program is corrupted or web browser too... but i can open 99% of them only not 1 or 2. I think that reinstalling my win is the only way out of these many problems i have now beacuse restarting my computer each day by 2-3 times isn't a solution.
View 1 Replies
View Related
Jul 9, 2011
My hard disk is corrupted and it causes frequent blue screen and restarts. I bought a new hard disk and transferred the data to the new hard disk. While transferring the files from old hard disk to new hard disk, the pc still encounters frequent blue screen and restarts, causing the data transfer to suddenly stop when it restarts.
Now I have installed the new hard disk and everything works fine.
The problem is when I open some word and excel files, the files are blank (like a new document) or show me a error message. This is probably caused due to the sudden restart while I was transferring files. I remembered some of the corrupted files are being transferred when the pc restarts by itself.
View 1 Replies
View Related
Aug 1, 2012
Every time I download something from Internet Explorer for like 2 MB or more it turns out to be either corrupted or unfunctional after download.
At first when I download a file the browser scans it and tells me its unsafe and wont open even though I know it isnt because I have used it many times before on my previous computers, but I tried downloading the same file again and it said it was unsafe BUT I was able to run it either way, after downloading that file it seems to bug up at Install in some point, I have no idea what is causing this so I turned my Laptop back to Factory mode but im still having this problem, Tried to turn it back to Factory mode again, still nothing.
View 9 Replies
View Related
Jun 10, 2012
I deleted music files from my Music folder in explorer...Then open up media player and found music files still there.Then I tried to delete them in media player with no result....It tells me files cannot be found.. plz I need some options on what to try next.
View 7 Replies
View Related
Jan 23, 2013
How do I remove corrupted files on my laptop
View 2 Replies
View Related
Feb 7, 2013
i recently had a OS partition go bad, and i used easeus to recover the files (not the partition) is there anyone with some knowledge to if there is anything i can do (or any software) with the files so i can move them to a new drive with a new bootable partition and get windows to boot from that new drive? or even install windows on that new drive but move all the program files and data so i don't have to re-install all applications
View 1 Replies
View Related
Apr 15, 2011
I probably got overly ambitious with a disk cleanup utility and now several functions of windows 7 don't work. New updates don't install, other updates that I DID install are missing, I am unable to run certain games, and I can't run SFC /scannow.However virus scan updates appear to be fine.What is the best way to fix this? I have an old backup I did with Norton Ghost on disk but something is wrong with the second disk so I can't use to to reinstall the entire backup but I might be able to extract some old files if I knew which ones to extract. I am running Window Seven Home Premium. It is a legal copy. I got it directly from Microsoft. If I try to run SFC /scannow from Windows I cannot get it to show up or do anything. Its like I never did anything. If I try to run SFC /scannow from the boot CD using this command
sfc /scannow /offbootdir=f: /offwindir=f:windows
I get this error messge:
Windows Resource Protection Could not run the repair service IF I try to run the repair outlined here:[URL]I get an error saying Windows cannot find the file specified.My computer specs are
desktop:
Drive C: W7 Home Premium 80GB NTFS (IDE)
Drive D: WinXP Pro sp2 80GB NTFS (IDE)
Drive E : Storage 80gb (IDE)
Drive F and G DVDR's
[code]....
View 4 Replies
View Related
Jan 17, 2012
Twice in as many weeks I have had a machine come to me missing the Outlook 2010 pst file needed to run. I have run GetDataBack for NTFS on both and recovered a string of pst files that look to be the appropriate size but I have had to run scanpst on them to get Outlook to use the files. Only a small percentage of the files can be repaired and of the repaired files only a small amount of email (messages) information is actually returned to Outlook. Is this the result of some type of new and very malicious infection?
View 1 Replies
View Related
Feb 13, 2012
At the moment, my Gateway M-Series laptop which has Windows 7 32bit will not do a system restore! It says my local disc ( C: ) has errors, it cannot check these errors so that I can restore the computer
My computer doesn't want to connect to the Internet also (lucky for me I have other means of accessing the Internet) and every time I open Chrome or any of my software it says there are corrupted files and the disk check will not run because there are corrupted program files? I haven't downloaded anything of late I keep a fairly clean hard drive, but when I went into system restore it set one of the restore points as 'DirectX Installed' which incidentally I haven't installed and isn't in any programs list.
After some tweaking I found I was able to check the disk and restore the computer but I would still like to know if any of you have any input on how to avoid future problems!!
View 2 Replies
View Related
Feb 11, 2012
I copied several large files (between 1 and 4 GB) from one USB hard drive to another. At the target destination several of the files had defects. They were in general not completely unreadable. Most could still could be opened but had clearly corrupted data. how can this be detected/prevented. Doesn�t Windows 7 have some kind of an integrity check when copying files? Also is there any good software to compare files for being exactly identical down to the last bit? Ideally with the capability to compare whole folder contents so that it hasn't to be done file by file.
View 8 Replies
View Related
Sep 15, 2011
My computer was installing the latest updates for windows 7 professional 64 bit and the battery died during the shut down process, and now when I start the computer it will allow me to log in but when it hits the desktop it freezes up completely. I have tried using the system restore but somehow my restore points cant be found anywhere and when I tried using the system repair option on the installation cd it says it cant because the problem is unfixable. The error it says it has is in the boot sector and it says the error code is 0x45d, but when I ran it a second time it didn't say that. I really don't want to deal with pulling off all of my personal files and then installing a fresh copy of windows because that would be too much of a hassle, but if i have to i will.
View 2 Replies
View Related
May 22, 2012
How to recover files if the hard drive is corrupted
View 1 Replies
View Related
Aug 11, 2012
if my operating system like xp or win 7 is corrupted/damaged which it can't be started to get/recover my files what software should i use
View 4 Replies
View Related
Mar 23, 2011
I've been using a flash drive for coursework and transferring data and windows 7 suddenly decided it was corrupted despite me finding no problems with it. So me being me decided to allow it to try and fix it and guess what happens, I wind up with a file with the same name as the folder it decided to remove and a new folder full of what looks like setting and configuration files (got a cog icon, cant remember what extension they have). How do I recover files that haven't been backed up???????
View 1 Replies
View Related
Jul 12, 2011
Shared files in win7 corrupted by HOMEgoup settings.Many problems with shares (ex XP connect problems) are caused by changed Microsoft settings, and potentialy bad MS implementation!
Quote : YOUR PASSWORD NEEDS TO BE IDDENTICAL on all systems using file share is INCORRECT(incomplete)
View 1 Replies
View Related
Nov 8, 2012
I (my wife) is running Windows 7 Home Premium (64). Windows explorer crashes when:
-Searching with more than 4 characters in the start menu
-Opening the Network and Sharing Center
-Various other times that seem unrelated
I have attempted:
-Startup repair X3 : it catches problems but doesn't repair them
-sfc /scannow command : also catches problems, and the CDA log shows all of the corrupted files.
-Copying the system32 files from a fresh windows install to fix the broken dll files while in another os : this didn't seem to have any affect
-System Restore doesn't have any images before the issue began
-Full system antivirus and malware scan and rootkit detection with no results showing (doesn't rule it out, but I used Norton commercial, Mbits, Lavasoft, and Kapersky online all in safemode, and some rootkit detectors)
-Repair Install : hangs when initiated
-Updating windows to SP1 : it seems the system attempted to update some time ago and failed or was interrupted. Now SP1 won't install, the updater hangs
-in an attempt to fix the windows update hanging issue, I tried:
-Installing the system update readiness tool (Download System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [September 2012] from Official Microsoft Download Center) : the update hangs too
-Installing the fix it program here (Fix the problem with Microsoft Windows Update that is not working) : didn't make a difference
-renaming the software center file as in this thread (Script or command to delete contents of Software Distribution folder?) and re-attempting to install sp1.
I (my wife) has some very expensive programs on her computer that we no longer have install discs for. She had them before we were married, but they seem to have been "lost in the move." We can probably work with each of the individual programs, but I'd sure like to look at other options that allow her to keep her file and program structure intact.
View 3 Replies
View Related
Nov 19, 2012
I am trying to run sfc/scannow but something seems not ok. Here is the log from C:WindowsLogsCBScbs.log latest time i started it[CODE]
View 2 Replies
View Related
Feb 1, 2009
I have just run the sfc /scannow command, just to see what the result would be.
If you've ported Windows Mail over from Vista like I have, then the scannow command returns the Windows Mail folders back to the default installation settings.
Windows Mail will no longer run.
I had to boot into Vista and copy the program files folder from Vista to Win 7 to re enable Windows Mail. The Windows Mail program store in app data remains unchanged.
View 3 Replies
View Related
Apr 29, 2011
I have Win7x64Ulti -Dell OEM I auto installed Sp1 in a moment of weakness (gave in to the pain of Windows 7).I have problems with some programs around com+ and VSS, notably Casper, but others as well so I ran sfc /scannow.Only one file shows up as a problem and Win says "cannot repair - source file corrupt". It is the windowssystem32catsvrut.dll, a com+ library.
Message follows:Cannot repair member file [l:24{12}]"catsrvut.dll" of Microsoft-Windows-COM-ComPlus-Runtime-QFE-CATSRVUT-COMSVCS, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch The attempted source is the winsxs folder.The 7600 would be pre SP1 if I read that right, so of course it cannot repair.So - I check the last disk image I had of this disk and in fact that file size and dttm is the same in the indicated winsxs folder but different in system32. I get that system32 is a secure dir/file and I cannot just copy/paste. But how to fix this is stumping me.
Weird part - I'm having trouble finding the actual file because of how Windows 7 uses Winsxs to dynamically link these files to the OS depending upon 32 or 64 bit access. I'm guessing there is a junction or symbolic link involved, because in Win explorer the file is correct size and date, in DOS it is correct size and date but when I run superfinder it shows all files with this name and system32 has wrong size and date.So it appears system32catsrvut.dll has a problem, and it further appears that the source to repair is from a pre-SP1 image in this library.I can't repair (OEM to SP1).I can't seem to copy the dll from the backup image.How do I get a valid copy of the dll? Or even tell if it is invalid?
View 7 Replies
View Related
Nov 19, 2012
I am trying to run sfc/scannow but something seems not ok. Here is the log from C:WindowsLogsCBScbs.log. Latest time I started it.
Code:
2012-11-19 14:24:52, Info CSI 00000055 [SR] Verifying 100 (0x00000064) components
2012-11-19 14:24:52, Info CSI 00000056 [SR] Beginning Verify and Repair transaction
2012-11-19 14:24:54, Info CSI 00000057 Repair results created:
POQ 13 starts: 0: Move File: Source =
[Code] ......
View 5 Replies
View Related
Jul 25, 2011
After running sfc/scannow, no matter how many times I run it, I continuously receive the same error(s).sfc/scannow Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection found corrupt files but was unable to fix some of them.
Details are included in the CBS.log windir\Logs\CBS\CBS.log. For example...Here is the portion of the CBS.log giving me the errors:2011-07-25 19:14:27, Info CSI 000002e4 [SR] Verify complete
2011-07-25 19:14:27, Info CSI 000002e5 [SR] Repairing 4 components
[code]....
View 8 Replies
View Related
