My dad downloaded lots of bloatware and phishing programs... I want to reformat his computer. He has windows 7 32bit ultimate installed. He has the disc for 32 and 64 bit upgrade cds. Can i switch his to the Windows 7 64 bit? If so, how?
View 6 RepliesI have a gateway desktop model gm-5483e with a motherboard ecs-945gct-m3 it came with vista home premium 32-bit what hardware do I need to swap out to make the 64-bit version run also I want to use it for some light gaming so how powerful can I go with the CPU right now its an Intel Pentium d925 dual core with each core at 3ghz
View 3 Replies View RelatedAfter Done Formatting My Computer I Installed The Sound Card And It Worked Perfectly Then I Download Graphic Media Accelarator And Then After Download When I Tried To Install It An Error Pop Out Saying Your System Doesn't Meet the minimum requirement
View 9 Replies View RelatedFirst here are my specs:
Acer Extensa 5620 (Laptop)
Intel Core2Duo T5250 1.5GHZ
2GB DDR2 RAM 533 MHZ ( I think)
120 GB HDD
I'm not too sure on the motherboard So I formatted my WinXP drive, and tried to install Windows 7 Ultimate x86.Everything went fine until after the first reboot, "completing installation" it would just crash and everything froze, making me have to do a 5 sec forced shutdown.Then I tried again about 3 more times...Still same problem.I didn't get a photo, but here is an image I found on google images, similar to my situation, except for my laptop, it has stripes like that but the original image still is in the background.
I keep getting this message: Windows could not format a partition on disk 0. The error occurred while preparing the computer's system volume. Error Code: 0x80070057I have done several steps already, I opened the cmd and I did the following steps[CODE]
View 1 Replies View RelatedThe way I have things set up right now is I've got Windows 7 Ultimate 32-bit on my netbook and it's dualboot with Ubuntu 12.04 32-bit (beta); what I want to do (and I'm not sure if this is even possible) is get my existing Windows 7 installation to work in VirtualBox inside Ubuntu.Basically what I want to do, is dualboot Windows 7 but also be able to run that same installation (with all programs and settings) in a virtual machine when in Ubuntu.Anyways, is this even possible? And if so, how do I do this?(currently I'm trying to figure it out myself but I haven't had any luck; although I have yet to try everything)And the point is to be able to still dualboot while at the same time being able to run the same installation in a VM if needed.
View 5 Replies View RelatedI have windows 7 ultimate installed in my system. But now I need windows xp 2 to be installed in my system.
View 2 Replies View RelatedI have Windows 7 Ultimate installed on an older PC and cannot get the service pack 1 to successfully install.At one time Microsoft Security Essentials was installed, but it has been uninstalled.I have tried with other virus scanners installed and with no security programs installed.I have searched the Microsoft forums
View 14 Replies View RelatedI currently running Vista Home Premium and am finally moving to Win 7I have the bootable Windows 7 install disc and certainly want to do a clean installNow I'm a bit on the anal side so I really want the install to be clean and am considering doing a wipe on the drive, then booting from teh Win 7 install cd.Is this wipe needed? Or will I get a good, clean install by simply booting to the Win 7 install cd
View 2 Replies View RelatedI bought Windows 7 Ultimate which comes with the 32bit and 64bit dvd's. Right now I have the Windows 7 RC1 32bit installed but as we all know its gonna start acting up in March since it will start to expire.As the computer boots up with the dvd in the drive, all works fine until it starts asking for the dvd drivers. Yes, my drive is IDE. Not SATA. Do I really have to go buy a SATA cabled dvd drive to install windows 7? Second, is the fact that I have a 32 bit OS now, affecting the fact that it can't find the drivers? Is it because it's looking for 64 bit drivers when I have a 32 bit os now? I've already read up on this issue for the dvd drivers and it seems it was coming up alot even before the RTM versions and it seemed that redownloading an ISO was the solution aside from getting a SATA drive. But, I didn't download my copy. I have a real disc. I've already tried switching in the BIOS where my drive is set to RAID and moving it to IDE and then to the other option on there and no luck so far on getting it installed.
View 9 Replies View RelatedCould not install windows 7 ultimate.Had first formatted hard disk. Started window on disk and has gone through all the steps except the last. Fail at one of the reboot during installation.
View 3 Replies View RelatedI am useing win 7 ultimate 64 bit and I never made rescue cd I do have,files backed up on carbonite but no hard copy. I installed sp1 but got a fatal area code (C000009A ) and instructed to,insert instalation cd to corect witch is the point I have no idea what I did with it. How do I get another cd, a boot cd, or,restore win 7 ultimate to factory setting.
View 4 Replies View Relatedi am running windows 7 ultimate on my Dell Inspiron desktop. I keep getting error codes whenever i try to install the sp1. I have tried everything that Microsoft has recommended. I have used the update tool and even took all the language packs off my system. I am still having the same problems. All other updates run fine.
View 3 Replies View RelatedI have tried installing & uninstalling xp mode and vm 4 times with new downloads again and again to no avail. i have tried to install xp mode first and get the error 2203...I have installed vm first and then xp mode with the same result. Error 2203 on the web seems to be related to an installer problem yet I have installed many programs with no errors at all.
View 1 Replies View RelatedI have an HP Pavillion m9515y that I bought at a garage sale. This is a pretty meaty desktop (Quad processors, 8 GB of RAM) that was a little over a year old when I bought this past July. It had Vista freshly (re)installed on it when I bought it. Vista ran well enough, although it had its own issues, none of which were like these Hard-lock auto-reboots I keep getting. -original installed OS on the system? Vista, reinstalled from discs from the guy I bought it from
- an OEM or full retail version? 64-bit Ultimate that a friend who works in IT gave me.
- What is the age of system (hardware)? - 1.5-2 years old.
- What is the age of OS installation? About 1 month now, although I reinstalled it twice with other complications within one week before settling on the installation I have now.
I installed Windows 7 (with SP1 included) the first time in early Sept. and, after having done so, did an update of the drivers, most relevant were the network and display drivers. For some reason, after going into sleep mode the first time, it would not wake up. A hard reboot found that the wireless network card would not reconnect after doing this. Reading through some forums I found that others had a similar issue and had to reinstall, so I did. Also, I had installed overtop the preivious installation (which I thought I told it not to do), so reinstalling from scratch-scratch seemed like a good idea. I blew away partitions, recreated them, formatted and reinstalled, and after reinstalling most of the programs, I finally did the critical windows update, which, ironically, only crtically crippled the machine. Apparently it was related to the display driver (which later I corroborated - see below). Updating the NVidia GEForce SE driver to the latest 5-2011 driver caused it to simply hang at a black screen, never allowing a log on screen. I lived with this for several days--always rebooting into the last known good config--and decided to reinstall. (Mind you, I tried to do a Restore but it wouldn't let me for some reason, saying it may have something to do with an antivirus running, which I turned off and it still wouldn't do it.)So I reinstalled it a 3rd time about a month ago, resolving to do Windows Updates one at a time in order to 1) be able to roll it back just one update if it caused a problem and 2)discern which one/s were causing problems. Sure enough, the display driver recaused the black-screen login hang issue, so I rolled it back and chose not to reinstall it. As it is, I have the original 2009 driver. In a related issue, I believe the screen blacks out for several seconds on occasion due to this. I can live with that, but I can't live with the...
BSOD (Hard-lock auto-reboot), which happens every day or two. I have found it to lock up with some consistency when I'm browsing the internet (on mozilla or chrome) and then again sometimes when I'm listerning to music with media monkey. I just yesterday updated the sound card driver and it hasn't locked up while listening to music (yet). I'm at my wit's end. I do not want to reinstall again because I'm in graduate school for literature and don't have the time nor patience to deal with it (at least not during the quarter), which is why I've enlisted the help of the technical community. I used to work in IT back in the 90s and early 2000s, and got out of it precisely because I wasn't all that good at it. Of course, this knowledge has helped me somewhat in this process, at least knowing how to install, reinstall and update drivers, but I am need of the community.
It won't install! It's stuck at "Expanding Windows Files 92%". Why?
View 6 Replies View RelatedI have just built a new computer -
Asus Sabertooth P67 B3
Intel i7 2600K (2nd Gen)
Seagate Barracuda 1TB 32mb cache
ATI Radeon HD 6870
Corsair 16gb DDR3 1600mHz
Thermaltake TR2 RX 650w
LG BDrom/DVDwriter
This is my first build. I have upgraded Mobo bios to 3209. I get the BSOD when I try to load Windows 7 Ultimate 64bit. [0x0000007E] I know I have probably missed something.
I just got the windows ultimate 7 64 bit disc from Microsoft the other day. I have been trying to install it on my computer and everything goes well until the second reboot. At this point the computer freezes at the windows 7 splash screen. The 32 bit version installs perfectly without any problems.
View 8 Replies View RelatedI'm trying to install Windows 7 Ultimate, 64-bit on my desktop. I reformatted the harddisk and booted to the DVD. I've already checked the compatibility and was previously running Windows 7 Ultimate, 32-bit. In the computer properties, it did say that the processor (AMD Athlon 64x2) is capable of running 64-bit. When I boot to the DVD, it goes through the process and seems like it is working, but after a few automatic reboots, it just black-screens. At that point, if I reboot, it just black-screens again it.I am able to put 32-bit back on it, and it installs without problems, but am trying to get it setup to run SharePoint dev tools. Is there something additional I need to do to install 64-bit that was running 32-bit?
View 1 Replies View RelatedI have an unusual problem which I could not find any answer so far.My version of Windows 7 is the Ultimate 64-bit, and lately I cannot install many 64-bit programs as it appears a message of incompatible version of Windows. Very strange.
View 5 Replies View RelatedHow to install turbo c in windows 7 ultimate
View 1 Replies View Relatedthis is 32 bit configured computer ,..............
View 1 Replies View RelatedI bought a new Desktop PC and it has the win 7 30 day trial.I need to install my Win 7 ultimate 64bit to my PC, deleting the 30 day trial. ( I need to know how to start the setup when the PC is booting up, most importantly)
[code]...
I built 2 PCs with the following spec:
CPU: Core i5 2500
MB: Asrock H61M/U3S3 (revised esata issue fixed)
RAM: 4GB GSkill Ripjaw X (2 x 2GB)
PSU: 450W Thermaltake PSU
HDD: 1TB Seagate 7200 HDD
ODD: Samsung DVD Drive
On both PCs after a successful clean Windows 7 x64 Ultimate, starts windows for the first time etc etc ask me to select windows update setting, goes into windows desktop then does a auto restart (proper logging off restart etc). At this point, after bios screen when it attempts to boot from hdd the PC just resets inself and goes back to POST, over and over again. I've tried using only one stick of ram, tried using VGA to do a clean install again instead of DVI, tried changing my RAM to a lower clock speed, every other bios setting is default. I also tried updating to the latest bios and again did a clean install (delete and create partition) even tried installing x86 instead of x64.
I was having problems with a computer with a win 7 ultimate installation. Ran Spinrite and found errors, they were corrected. When trying to reboot - something was wrong. So decided to do a clean install from the original disk. This is the same disk used for the previous clean install.Once disk started and accepted the terms of service choose Install - Custom and formatted the drive... really wanted a clean install. After the format chose next and the install seems to start normally. During the "Expand Windows Files"?, I think that is what it says the following error comes up...Windows cannot install required files. Make sure all files for installation are available. 0x80070079.
View 7 Replies View RelatedWhenever I want to install Internet Explorer 9 in my windows 7 ultimate x86
View 8 Replies View RelatedI'm currently running in Safe Mode right now because I can't sit on standard boot too long before I have a random BSOD. It's completely random and very annoying, I need help as soon as I can get it. I'll be back with my minidump file shortly, in the mean time here are my specs:
CPU: Intel i5 2300
PSU:diablotek 600W
Memory: PNY Optima PC3-10666 2x4GB
GPU: Geforce 550 Ti
Mobo: GIGABYTE Z68AP-D3
Soundcard: none
Case: Custom
PS. I thought maybe this was an install issue so I reinstalled Windows 7 x64 again without downloading any updates and its still giving me grief.
Using ASUS P5K-E motherboard which I bought in 2007. and I just installed Windows 7 Ultimate.
When I run the Chipset Drivers Installation CD into my drive, it shows this (attached JPG)
It should be compatibility problem between the drivers softwares and the OS version...any solution?
I've build a computer and want to install windows 7 x64 on it. But when I start the setup I allways get a bsod: Most of the time with this error: 0x00000124. I also had these: 0x0000007F, 0x0000009C, 0X0000007E, 0x0000000A
These are my specifications:
Mobo: MSI P45 Diamond
CPU: Intel core 2 Quad Q9650 3GHz
RAM: Kingston HyperX (KHX1600C9D3K3/6GX), I've put in 2 X 2GB in slot 1 and 3 atm.
HD: 1 Maxtor I, 1 Maxtor II (tried seperatly, no success)
Graphics: Powercolor radeon HD 6850 PCS+
PSU: OCZ ModXstream Pro, 600W
The files are loaded from the DVD, then I see the windows logo. After that I usually get a BSOD. Right before I have to do the settings and create partitions. Very rarely I can get past it and start the installation, but then a blue screen comes up anyway. When I try in Safe mode, it loads drivers until driver.sys. Then it just stops.
Right now, I've put only one memory stick in (2GB) and I tested it with memtest86+, there were no errors. I also checked the hard drive for errors. I was able to successfully install windows 2000 professional.
I also tried to install Windows XP, but that didn't work either. Could it be my graphics card? If so, what can I do about it. I don't have onboard graphics.
I recently purchased a new motherboard, RAM and SSD to upgrade my computer a bit. I planned on doing a clean install onto the new SSD, rather than upgrading Vista x64, which is installed on a 750GB hard drive. However, after I set the BIOS to boot from CD, hit a key to boot off CD, it freezes at the loading windows screen before you can select your language preferences. I tried running this with only 1 4GB memory stick instead of 2.
Also, unplugged everything that wasn't needed from the computer, leaving just the video and ps/2 mouse + keyboard. I also tried, taking out the PCI Sound card, starting with just the SSD drive connected and the 750GB drive disconnected and disabling everything I could think of that wasn't needed in the BIOS. I tried both the 64bit (which I would like to use) and the 32bit install CDs. Both freeze at the same spot.
A while back I purchased a retail copy of Windows 7 Home Premium which had both a 32 and 64bit disk. I installed the 64bit version on my PC, but subsequently purchesd and installed a Ultimate upgrade (via disk). This disk had a different key on it. Can I now use my old Windows 7 HP disk (64 or 32 bit) and key to do an install on another home computer?
View 4 Replies View Related