Clean Windows 7 Install On New SSD Installation Error?
Aug 3, 2012
I have a Samsung series 9 (NP9004XC) and I am upgrading the 128gb SSD that came with the computer to a Crucial M4 256GB mSATA. I am doing a clean install from a bootable USB that I created from the recovery disc that was included with the computer.I can load up setup but once I get to the part where I choose what disk I want to install it to I get an error. There is only one disk listed (Disk 0, Partition 1) and when I try to select that disk to install Windows to I get the error:"Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
View 7 Replies
ADVERTISEMENT
Feb 13, 2013
I am getting an error "cannot install" 0x80070714 when I try to install windows 7 into a clean disk and the installation just stops..
View 3 Replies
View Related
Jun 18, 2012
i have built my computer with new parts and the installation stalls returning the errror code: 0x80070570
View 1 Replies
View Related
Jul 1, 2010
i had windows vista on my pc and i did a Clean Installation of windows 7.but now i have some problems,and i want to install windows 7 again.do i have to go back to windows vista? i have a windows 7 upgrade dvd.
View 9 Replies
View Related
Dec 19, 2012
My daughters CQ61 required a clean install after repair. Windows 7 jus goes through the normal install process and hangs at completeing installation. I'm not a Noob but not a Geek either. I can only assume the drive is fine as it is running fine in the T400 IMB i am using now. Now here is the strange bit..... When i was just starting out i to had a CQ61 and it too needed a clean install and it did the same for months with friends in th know looking and trying to. In the end i send off for the factory software discs and tey went on straight away with win7 working fine. It was literally restored to new. I passed on said disks when i sold said CQ61 adising the guy never to go down the road i had. Now the software discs are no longer available from HP and There is none on torrents anywhere. I cannot accept that this is the only way to install clean install. If it was that critical to have the discs they would send them out with the new machine. So thats muti attempts by multiple people on 2 identical machines presenting the same hang. One was solved with the Sowfwaredisks provided by HP and are no longer available. Should have copied them i know but never thought i would be looking down the same barrel of the same gun.
View 1 Replies
View Related
Aug 12, 2012
Everytime I go do a fresh install of windows it gives me this error 0x80070241 and says some of the files may be corrupt.
View 1 Replies
View Related
Aug 20, 2010
I am having some troubles trying to install win 7 home premium. I just finished building this computer with a brand new western digital hard drive 2TB (SATA).Everything on this machine is brand new. When I get to the point to where it asks me "where do you want to install windows?" screen I get this error 0x80300024 or it will just sit there and the little loading icon just hangs there. What is e problem.
View 4 Replies
View Related
Aug 7, 2012
i tried to do a clean install acording to your suggestion , but this error kept coming up windows error 0x80070057... I'm using asus P6T mobo (no on board gfx option) nvidia gtx285 gfx, 2mb ram, and that's all... The hdd is newly formated..
View 7 Replies
View Related
May 7, 2012
emachines em350 netbook with windows 7 installed. For some reason it got messesd up and he tried to do a system restore. Since then when you try to boot up its saying input a password to unlock the harddrive which we dont know. After you input wrong code 3 times you get option to continue which takes you to black screen saying no bootable device detected press any key to continue. Next i tried to do clean install with windows 7 from a usb this goes fine untill it asks for missing cd/dvd driver i have found away round this which is to select cancel then when back on install now screen swap the usb to another port and continue. This works so i select terms and so on then get to part where it asks where to install windows now i have formated and made a active partition on the hard drive but when i try to click next i get error code 0x8007045d this is where im stuck.
View 9 Replies
View Related
Jun 1, 2011
After saving money for quite while, i was able to finally buy a new pc, i had assembled other pc`s for my friends and never had any trouble installing windows on their systems, but now, every time i try to install windows 7 x64, the computer hangs while extracting windows files, then, after some time it prompts me with the error 0x80070002, saying that it didn`t find the required files, so i tried with many suggestions:- Updated to the latest BIOS.- Switched the RAM modules from A2 and B2 to A1 and B1 (my cpu fan was in the way so i had to buy another, and yup, i`m living on cup noodles).
- Ran memtest x86+ for 8 hours (no errors)- Ran sea tools but it didnīt detect any drives (still donīt know why, and the windows 7 installer detects the hdd just fine, also tried it on another computer and works fine)- Switched sata cables, switched sata connectors.- Switched from ahci to ide on the Bios, but it didnīt detect any drives after that, so i returned to ahci.- Disassembled all the pc and re-assembled it, re-checked every connection with every install guide 3 times- Tryied to install again, several times, with the same problem, never getting beyond the 48% extraction, mostly 12%, 9% and so on.And right now, iīm poor, un-able to work, and dangerously nearing towards un-employement (sold my previous computer to buy this one, my savings are gone, and canīt afford to get sick, a little problem called "living in Mexico"
View 16 Replies
View Related
Oct 3, 2012
i just upgrade my windows 7 ultimate to windows 8 9200 then i guess i delete some files and now im having problem with this 0x80070002 error.
View 1 Replies
View Related
Sep 9, 2010
savvy, and am having troubles installing Windows 7 on my laptop. I purchased the software, downloaded the .iso file from Microsoft's site, then burned the .iso file to a disc. Once on the disc it showed a few different folders and a setup option. I launched the setup option, which brought up the install window for windows 7. I chose clean install because upgrade is not an option for the current version of vista that I have, and while it is copying the files, after about 3% it gives me the error code 0x80070241 and says something about not being able to copy all of the needed files and that some of them may be corrupted. I don't know if this is a problem with my computer or with the disc that I've burned.
View 2 Replies
View Related
Apr 29, 2012
I'm weeks of spasmodic attempts into replacing my old C-drive with a new SSD and a clean install of Windows 7, 32 bit. Here's the current loop: Following Sandisk's instructions on formatting SSD for use as OS with Win 7:
1) I verify BIOS - SATA is (as before) set to ACHI
2) I place Windows 7 upgrade disc in drive, hoping to use "Option 1 - normal clean install" (from Clean Install with a Upgrade Windows 7 Version )
3) I get "Windows Error Recovery" screen, stating "windows did not shut down normally" (white text on black screen), with two options - start normally, or startup repair.
- if I select "start normally," it merely returns (after a minute or two) to the same Error Recovery screen after some POSTs (nothing other than single-beep) - no request for my input, no "press any key," etc.
- if I select default ("startup repair") option load: "Windows cannot repair this computer automatically" ultimately results after a lot of attempting to repair, etc.
PC will still run Ok from old HD when connected, and shows the SSD in Disk Management with a "System Reserved" 100 MB (F) partition along with a 112GB (E) partition. I keep thinking I need to wipe those and try again, but not sure how or if that's even worth trying. I did have the same SSD up and running Win 7 for a brief time - didn't start at some point afterwards...
View 9 Replies
View Related
Dec 17, 2011
What do I do now? I decided to replace my existing hard drive as I thought it was damaged due to viruses. I installed a new hard and then used my Windows 7 Ultimate DVD to install. I got as far as the above. If this question has been answered somewhere else on this site
View 3 Replies
View Related
Apr 15, 2012
Just inherited a pc, and bought a brand new 1tb hdd yesterday to install windows on. I was foolish at first by not changing any of the bios settings (was a long time since I have done an install) and just left it as it was. I got through to installing windows and it stopped at expanding files with the above error code, which I have heard is really commonWindows cannot install required files. The file may be corrupt or missing. Make sure all files required or installation are available, and restart the installation.Now I am certain there is nothing wrong with the DVD, as it is the same one that has been used on two other PC's. I tried turning it off and restarting, that was when I got another error load up - Bootmgr is missing!After this I restarted it and changed the bios settings to boot from the DVD drive. I tried doing a repair on this through the disc.
Went through all the settings and typed Bootrec.exe/REBUILDBCD in command prompt but that came back fine. I tried clicking startup repair after this but it did not restart, so I just went through the motions and restarted it manually as by this point I was getting frustrated. Upon restart I went through and booted from the DVD, and it went straight through. This time I tried re-installing but deleted all the partitions on the drive which had appeared since trying to install. However the same error message has come up again
View 1 Replies
View Related
Jun 26, 2009
I have an old Dell XPS Gen2 desktop that is running WinXP. I wipped my Raid0 hard drives to perform the install of Windows7. After helping the setup see my raided hard drives, I started the install.
After the second step in the installation process I keep getting an error message that says something like: "Windows could not configure your computer's boot sequence. The installation could not continue"
Does anyone know what I'm missing? Could my bios be too out of date for this setup? or is it something else?
View 6 Replies
View Related
Sep 19, 2012
I had 32 bit Windows 7 home premium provided by OEM. Recently I purchased Windows 7 professional 64 bit in order to increase my memory.(My system is 64 bit capable) I followed [1]. I am using USB for installation. I booted the system with USB. Then at disk manager I deleted all the partitions(including recovery ) Then I refreshed and click next and I got an error saying setup unable to create system partition.
View 9 Replies
View Related
Dec 20, 2009
I'm trying to install Windows 7 and keep getting the error message "0x80070057, Windows Setup could not configure boot manager." I'm using an OEM disk. Can anyone point me in the right direction?
View 5 Replies
View Related
Dec 6, 2012
The laptop was running slow and I decided it was time to clean things up and get her running like new again. Backed up everything and wiped the drive using KillDisk.Three and a half hours later when the process was done I popped in my Wndows 7 OEM disc only to be greeted with the dreaded Unmountable Boot Volume on that pretty blue screen . Tried several times but it's the same thing each time.
(Dell XPS 15, Western Digital 750GB hard drive)
View 6 Replies
View Related
Oct 16, 2011
I have leptop first I want to recovery but I press format hard drive partition to result in full unlocation not left a single partition 465gb partition unlocation there are leptopku 500GB hard drive and I try to enter recovery dvd lg dvd but do not want the road containing the message dvd / cd rom # 1 not complete, and I also had to replace the windows wishful dream but apparently there is an error code: 0x80070057
View 3 Replies
View Related
Dec 19, 2011
I decided to replace my hard drive because it seemed to have viruses that were making it run incredibly slow. I put in a brand new hard drive and proceded to run the Windows 7 Ultimate disk. I got as far as the beginning of the actual installation (after telling it what partition to put it on) and it ran for a few minutes and then I got the errror message 0x80070057.
View 2 Replies
View Related
Dec 24, 2012
So I have spent the last few days troubleshooting the problem, I have tried most of the solutions I have found online, but still I get the 0x80070570 error at 14% of the install process. I have reformatted the hd prior to trying as well.some random observations:I have run hd diagnostics and everything passedI notice that in the BIOS setup utility that there are 3 SATA HDDs listed though I only have the one 'internal one' and no peripheralsI have downloaded and burned (and burned to USB) the .ISO file about five times with the same resultI haven't tried removing RAM because I only have one chip (4 gb) and I assume I cant have 'no' RAM to proceedAs I am sure you can imagine, it is driving me absolutely crazy.
View 8 Replies
View Related
Aug 12, 2012
I have windows 7 32bit and going to clean install the 64 bit version and the OS is on drive C (or partion C) so I copied my personal files to drive G,If i clean install windows 7 64 bit will it delete everything on my hard drive or will it just format the partion that has the os.
View 1 Replies
View Related
Mar 18, 2012
i tried many time to reformat, then re-install win 7, pc re-started and stopped at the black screen with mouse cursor, i have tried F8 and start up repair, nothing helps.
View 1 Replies
View Related
Jul 23, 2011
I've done a clean installation of win 7 home for a mate on his laptop and want to use the product key that is underneath the laptop to complete the installation but the key has faded completely, I've emailed toshiba about it as its a toshiba model but ive had no response and its been 2 days. Is there any way to retrave it any quicker?
View 9 Replies
View Related
Mar 29, 2012
After formatting and setting a new partition using the installation disk, I install Windows 7, all goes well. But as soon as the installation is finished and my laptop restarts, it wont boot from the HDD. I keep getting error messages saying:
Windows Boot Manager
Windows failed to start....
File: ootBCD
Status: 0xc000000e
[Code].....
A copy of the current boot configuration data will be saved as c:ootcd.backup.0001
However when i hit the "ok go ahead and fix it then!"-button i get another error saying Startup Repair cant save the new boot options. Anyone know if i can fix this problem with BCDedit or bootrec.exe
View 3 Replies
View Related
Sep 13, 2012
Got Windows 7 Clean Installation over the computer's USB 3.0 port done without too many problems but with some hassle anyhow.For the clean installation I followed the procedure of GreGrocker Clean Reinstall - Factory OEM Windows 7 and put the whole installation onto a 4GB USB Flash Drive.From the computer's USB 2.0 ports there was no problem whatsoever and Windows 7 got installed very quickly.However, over the computer's USB 3.0 port things weren't easy. I finally got it done by uploading the proper USB 3.0 Root Hub and Controller drivers *.ini and *.sys files.Strangely enough, at first everything went well over the USB3 port and the WinPE environment with its RAM drive (X:) got deployed correctly. The only sensible explanation for that is that the computer's BIOS used the appropriate and build-in USB3 driver to do that part of the job.However, once the the installer (located in the X: drive) was about to install Window 7 on the system HDD, it asked me for a CD/DVD driver. I loaded the appropriate USB3 drivers at that stage and the installation process continued over the USB3 port.I had a closer look in the RAM drive (X:WindowsSystem32DriverStoreFileRepository), and indeed, there are no USB3 drivers present anywere in that folder, only USB2 drivers where in there, named: usb.inf_amd64... and usbpor.inf_amd64... So I was wondering, as USB3.0 is so common and the future standard, why aren't there any USB3 drivers in that folder present? Is there any possibility that the creators of the Windows 7 Clean Installation files (Digital River, or My Digital Live) could put USB3 drivers in the Win7CI package?
View 1 Replies
View Related
Jul 31, 2011
Purchased a Windows 7 64 bit Professional (academic). I have been originally using a Windows 7. However, the HDD had been giving me fits and has currently died. I'm not unable to activate my upgrade key since my new HDD does not have an old version of Windows to upgrade from. What should I do?
View 1 Replies
View Related
May 17, 2011
i was just wondering how i extract the files from an installation disc onto a flash drive, so i can use the flash drive to perform a clean install.Extract Files from Windows 7 Installation DVD.i already looked at this but it wasn't specific to my uses.
View 3 Replies
View Related
Dec 1, 2011
I've been troubleshooting this computer for some time now. At first, I disabled RAID because of the blue screens and I found that one was bad and the second of the RAID 1 appeared fine. Well, I installed XP to ensure it would work and that was extremely slow. My client didn't have a disc to XP MCE, but instead bought Windows 7. The installation took about 12 hours and the system is often unresponsive. On resource monitor, the 2.13Ghz Conroe CPU is barely tapped and the 2GB of RAM is barely at 30%. However, the system takes forever to boot and it very often stops responding for a period of time.
I did my research and found out that this model--original specs--can handle 7 better than this. I told the client it was probably an HDD error, as it seems to hang everytime the system must access the HDD. I can't even run the Index to find out what the systems rating is. I mem tested the RAM and chkdsk the HDDs before removing the first because of its clear faults in its inability to hold an OS installation. I recently installed the 2.5.3 BIOS update, but I haven't had a chance to install a newer version of Intel Matrix Manager.
View 1 Replies
View Related
May 6, 2012
i clean installed new WINDOWS 7 PROFESSIONAL 32bit on laptop SONY VAIO VGN-FZ11Z.Operating system is genuine but downloaded from MSDN. But it is giving me a lot of process validation errors. Genrally these errors are coming on application launch. After that mostly application aborts or restarts.
View 2 Replies
View Related
