Error 0x80070057 During Clean Install Of Windows 7 On New Hard Drive?
Dec 17, 2011
What do I do now? I decided to replace my existing hard drive as I thought it was damaged due to viruses. I installed a new hard and then used my Windows 7 Ultimate DVD to install. I got as far as the above. If this question has been answered somewhere else on this site
View 3 Replies
ADVERTISEMENT
Dec 19, 2011
I decided to replace my hard drive because it seemed to have viruses that were making it run incredibly slow. I put in a brand new hard drive and proceded to run the Windows 7 Ultimate disk. I got as far as the beginning of the actual installation (after telling it what partition to put it on) and it ran for a few minutes and then I got the errror message 0x80070057.
View 2 Replies
View Related
Aug 7, 2012
i tried to do a clean install acording to your suggestion , but this error kept coming up windows error 0x80070057... I'm using asus P6T mobo (no on board gfx option) nvidia gtx285 gfx, 2mb ram, and that's all... The hdd is newly formated..
View 7 Replies
View Related
Dec 20, 2009
I'm trying to install Windows 7 and keep getting the error message "0x80070057, Windows Setup could not configure boot manager." I'm using an OEM disk. Can anyone point me in the right direction?
View 5 Replies
View Related
Oct 16, 2011
I have leptop first I want to recovery but I press format hard drive partition to result in full unlocation not left a single partition 465gb partition unlocation there are leptopku 500GB hard drive and I try to enter recovery dvd lg dvd but do not want the road containing the message dvd / cd rom # 1 not complete, and I also had to replace the windows wishful dream but apparently there is an error code: 0x80070057
View 3 Replies
View Related
Mar 9, 2011
I bought an HP desktop about 2 years ago with vista 64 bit on it and it has been crappy ever since. I've had problems with programs not being recognized, things not installing at all when they should, and it freezing up for no good reason. Anyway, I went out and bought Windows 7 ultimate the full version. I saved the few files I have on a jump drive and I want to completely wipe out the hard drive and install windows 7 and start from scratch.
View 9 Replies
View Related
Jan 4, 2013
Recently did a clean install of windows 7 on my laptop but when I finished the install, I noticed that there still 158 gb used space on my hardddrive. Is this normal? I thought I had reformatted the entire system as i don't have aceess to any of my pre-existing files...
View 2 Replies
View Related
Apr 6, 2012
I purchased an Inspiron 15R today and wanted to do a clean install of Windows 7 right out of the box. I'm using a Windows 7 disk from another machine.I formatted the drive and all of it's partitions (recovery etc.) and installed the OS. After booting though I get sent to an error screen that tells me Windows had an error starting up and that I should choose a way to startup with the usual safe mode etc. No matter what I choose it sends me to this screen. So I booted from the disk again to attempt to format and reinstall, but now I have no disk drives to install to.
I have run a diagnostics check and nothing seems to be wrong, the HDD is still being recognized in the BIOS. What can I do to get my HDD back and showing up in the install destination options?
View 1 Replies
View Related
Dec 22, 2010
I'm doing a clean install on my computer, and it's going alright until it asks me to choose which hard drive I want to install Windows 7 on. Apparently I have 2: a C drive and a D(Recovery) drive.What should I do in this situation? Should I just install on the C drive, or should I do what it says here: Partition the Hard Drive in a Windows 7 Install and delete the partitions and create a new one.
View 7 Replies
View Related
Oct 27, 2009
I have download windows 7, backed up all my drivers and copied all my important info onto my external Hard drive and am about to try and clean install windows 7.
But do i have to partition the hard drive? My Dell laptop has a 110GB hard drive which came already partitioned. 10GB is called 'Recovery', do i need to do the same and make a larger partition and install Windows 7 or just leave it as it is?
View 9 Replies
View Related
May 20, 2011
I am trying to install windows 7 ultimate x64 on a new build, I am getting the error in thread title when it begins to install. I've scoured this forum to see what others had similar issues and tried the fixes. I tried with one stick of ram, tried re-burning the iso, i've used 3 different discs one 32 bit the other 2 x64. The funny thing is, I have installed ubuntu 10.10 succesfully from a usb flash drive, but could not install ubuntu from a disc. The ubuntu cd was not a burnt copy but a legit disc i ordered from canonical. the windows install wizard lets me create partitions and delete them, it even looks like it tried to format the hard drive because when i go to attempt to install again evidence of the previous failure is there as a system and primary partition. since the 10.10 installation from flash drive went without a problem i do not believe there is a problem with the hard drive. the dvd drive is sata and is connected properly.
my system info is as follows
amd athlon II x4 630 cpu at 2.8
4gb ram
asus m4a78lt-m motherboard
wd caviar black 640gb HD sata
lite-on dvd multi recorder sata
ati xfx 512 mb video card
my boot settings go to the hdd first and i tried using the popup menu to boot from disc, for some reason it looks like it has a problem writing from the dvd drive to the hard disk.
View 2 Replies
View Related
Jun 30, 2010
In doing a clean install of Windows 7 Ultimate (32 bit), an error appears when it gets to "Expanding Windows Files". Error 0x80070057. Had a look to see if any others had the same problem and many did. I've tried what others have suggested including wiping the hard drive etc etc. Now the strange thing is I have installed Windows 7 Ultimate (32 bit) (same as the one above) already, on the same laptop, with the same hard drive and everything and it installed without a problem!!
View 9 Replies
View Related
Nov 11, 2012
Originally got message - Disk read error occurred press ctl alt del to restart. Then tried plugging this drive using a USB connector into my desktop PC to see if I could run some chkdsk. Then my desktop PC displayed messages telling me my firewall and virus software had been turned off and the computer crashed. ROOTKIT? So I was left with 2 drives not working. I re installed windows on desktop but using ISO on flash drive BUT can't on the 500GB Hitachi HTS545050B9SA00 for some reason. Windows setup loaded and Deleted old partitions and formatted. When I tried to install, it froze. It now just boots up with a windows loading screen and I'm also unable to boot from flash drive as it freezes. This is on a Sony Vaio VPCEB4E4E.
View 2 Replies
View Related
Apr 6, 2012
I have a PC on which the hard drive died. I had previously done the Advisor and it said everything is OK for new install of Win 7 Home Premium.
I removed old hard drive and 2 gigs of memory (now 2 gigs installed) installed new hard drive, set appropriate ( i think) BIOS parms. When I start the DVD I get the 'loading files' message and the colorful logo then a blank screen with a large arrrow cursor -- and nothing. Wait 5, 10 15 minutes and the only hint of activity is the hard drive light is flickering about once every 2 seconds. I've now waited for over an hour and still nothing else.
I've tried to do all the things that have been suggested for others who have had problems but it hasn't helped. Machine is a Dell 4700C with 3.4 GHz processor , 2 gigs of memory, only keyboard, mouse, and monitor attached in addition to the hard drive.
View 9 Replies
View Related
Oct 13, 2012
How to run through a quick clean install of windows 7 and my hard drive as I believe I have some nasty root-kits. All I need to know is where I can download windows 7 again - I have product key). And some basic steps doing the clean wipe. Also could you take me through partitions and how to do one? I want my hard drive completely clean restoring my system.
View 19 Replies
View Related
Aug 12, 2012
Everytime I go do a fresh install of windows it gives me this error 0x80070241 and says some of the files may be corrupt.
View 1 Replies
View Related
Aug 20, 2010
I am having some troubles trying to install win 7 home premium. I just finished building this computer with a brand new western digital hard drive 2TB (SATA).Everything on this machine is brand new. When I get to the point to where it asks me "where do you want to install windows?" screen I get this error 0x80300024 or it will just sit there and the little loading icon just hangs there. What is e problem.
View 4 Replies
View Related
Aug 3, 2012
I have a Samsung series 9 (NP9004XC) and I am upgrading the 128gb SSD that came with the computer to a Crucial M4 256GB mSATA. I am doing a clean install from a bootable USB that I created from the recovery disc that was included with the computer.I can load up setup but once I get to the part where I choose what disk I want to install it to I get an error. There is only one disk listed (Disk 0, Partition 1) and when I try to select that disk to install Windows to I get the error:"Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
View 7 Replies
View Related
Apr 19, 2012
i was wondering if anyone has any programs they could recommend to use to wipe a hard drive clean before reinstalling windows 7, I noticed you have this CCleaner 3 link on here CCleaner - Download.com If i put that on a disk and started it up as i would to reinstall can that wipe the disk clean?
View 9 Replies
View Related
May 7, 2012
emachines em350 netbook with windows 7 installed. For some reason it got messesd up and he tried to do a system restore. Since then when you try to boot up its saying input a password to unlock the harddrive which we dont know. After you input wrong code 3 times you get option to continue which takes you to black screen saying no bootable device detected press any key to continue. Next i tried to do clean install with windows 7 from a usb this goes fine untill it asks for missing cd/dvd driver i have found away round this which is to select cancel then when back on install now screen swap the usb to another port and continue. This works so i select terms and so on then get to part where it asks where to install windows now i have formated and made a active partition on the hard drive but when i try to click next i get error code 0x8007045d this is where im stuck.
View 9 Replies
View Related
Jun 1, 2011
After saving money for quite while, i was able to finally buy a new pc, i had assembled other pc`s for my friends and never had any trouble installing windows on their systems, but now, every time i try to install windows 7 x64, the computer hangs while extracting windows files, then, after some time it prompts me with the error 0x80070002, saying that it didn`t find the required files, so i tried with many suggestions:- Updated to the latest BIOS.- Switched the RAM modules from A2 and B2 to A1 and B1 (my cpu fan was in the way so i had to buy another, and yup, i`m living on cup noodles).
- Ran memtest x86+ for 8 hours (no errors)- Ran sea tools but it didnīt detect any drives (still donīt know why, and the windows 7 installer detects the hdd just fine, also tried it on another computer and works fine)- Switched sata cables, switched sata connectors.- Switched from ahci to ide on the Bios, but it didnīt detect any drives after that, so i returned to ahci.- Disassembled all the pc and re-assembled it, re-checked every connection with every install guide 3 times- Tryied to install again, several times, with the same problem, never getting beyond the 48% extraction, mostly 12%, 9% and so on.And right now, iīm poor, un-able to work, and dangerously nearing towards un-employement (sold my previous computer to buy this one, my savings are gone, and canīt afford to get sick, a little problem called "living in Mexico"
View 16 Replies
View Related
Oct 3, 2012
i just upgrade my windows 7 ultimate to windows 8 9200 then i guess i delete some files and now im having problem with this 0x80070002 error.
View 1 Replies
View Related
Aug 23, 2012
I'm trying to do a clean reinstall, but I can't reformat the drive. I don't get very far, menu 'where do you want to install window', which is supposed to have a Format option, it doesn't!
View 7 Replies
View Related
Aug 15, 2012
Hard drive is full but not really. I think it is a virus because I removed a bunch of programs and there is very little in computer and it said I had 9GB available the next day went to 180KB free out of 296GB. I can't even take pictures off to wipe out and start over.
View 2 Replies
View Related
May 13, 2009
I am very lost, I have a IBM ThinkPad T42 with an older 20Gig hard drive that is blank, no OS on it, nothing at all. I tried to perform a custom clean install of Windows 7 and get to the part where you can format the drive or install drivers. When I select to install the drivers it can never find any.
What am I doing wrong? I know a little but I guess not enough, do I need to install fro somewhere else? and what drivers is it looking for?
View 1 Replies
View Related
Sep 9, 2010
savvy, and am having troubles installing Windows 7 on my laptop. I purchased the software, downloaded the .iso file from Microsoft's site, then burned the .iso file to a disc. Once on the disc it showed a few different folders and a setup option. I launched the setup option, which brought up the install window for windows 7. I chose clean install because upgrade is not an option for the current version of vista that I have, and while it is copying the files, after about 3% it gives me the error code 0x80070241 and says something about not being able to copy all of the needed files and that some of them may be corrupted. I don't know if this is a problem with my computer or with the disc that I've burned.
View 2 Replies
View Related
Apr 29, 2012
I'm weeks of spasmodic attempts into replacing my old C-drive with a new SSD and a clean install of Windows 7, 32 bit. Here's the current loop: Following Sandisk's instructions on formatting SSD for use as OS with Win 7:
1) I verify BIOS - SATA is (as before) set to ACHI
2) I place Windows 7 upgrade disc in drive, hoping to use "Option 1 - normal clean install" (from Clean Install with a Upgrade Windows 7 Version )
3) I get "Windows Error Recovery" screen, stating "windows did not shut down normally" (white text on black screen), with two options - start normally, or startup repair.
- if I select "start normally," it merely returns (after a minute or two) to the same Error Recovery screen after some POSTs (nothing other than single-beep) - no request for my input, no "press any key," etc.
- if I select default ("startup repair") option load: "Windows cannot repair this computer automatically" ultimately results after a lot of attempting to repair, etc.
PC will still run Ok from old HD when connected, and shows the SSD in Disk Management with a "System Reserved" 100 MB (F) partition along with a 112GB (E) partition. I keep thinking I need to wipe those and try again, but not sure how or if that's even worth trying. I did have the same SSD up and running Win 7 for a brief time - didn't start at some point afterwards...
View 9 Replies
View Related
Mar 1, 2011
I recently did a clean install of Windows 7 pro (64 bit) over an XP pro (32 bit) with 2 HD. The install proceeded without any major "hiccups". After the install, I noticed that when I try to access files on the "D" drive --- my second, I get error messages stating "user does not have access". I have tried troubleshooting but to no avail. Really would like to access those files. Both drives "show" NTFS where they were both FAT32 prior to the new OS. I don't understand how I can access the files on the "C" drive but not on the "D" drive. The files that I would most like to access are *.doc and *.pdf.
View 1 Replies
View Related
Mar 8, 2011
am struggling with error code 0x80070057 which is affecting import of photo's into windows photo gallery
View 2 Replies
View Related
Apr 15, 2012
Just inherited a pc, and bought a brand new 1tb hdd yesterday to install windows on. I was foolish at first by not changing any of the bios settings (was a long time since I have done an install) and just left it as it was. I got through to installing windows and it stopped at expanding files with the above error code, which I have heard is really commonWindows cannot install required files. The file may be corrupt or missing. Make sure all files required or installation are available, and restart the installation.Now I am certain there is nothing wrong with the DVD, as it is the same one that has been used on two other PC's. I tried turning it off and restarting, that was when I got another error load up - Bootmgr is missing!After this I restarted it and changed the bios settings to boot from the DVD drive. I tried doing a repair on this through the disc.
Went through all the settings and typed Bootrec.exe/REBUILDBCD in command prompt but that came back fine. I tried clicking startup repair after this but it did not restart, so I just went through the motions and restarted it manually as by this point I was getting frustrated. Upon restart I went through and booted from the DVD, and it went straight through. This time I tried re-installing but deleted all the partitions on the drive which had appeared since trying to install. However the same error message has come up again
View 1 Replies
View Related
Oct 26, 2011
I currently have a 500GB SATA drive with 2 partitions, C: has Vista Ultimate in it and most of my (Really Important) data is in D:- I do not have an external drive with enough space to back up both partitions, only C: -- If I install Windows 7 on C:, will I also lose all the data in D: (Partition 2)?I want to be 100% sure I won't end up with data loss on D: if I do a clean install on C:
View 11 Replies
View Related