I'm trying to do a clean reinstall, but I can't reformat the drive. I don't get very far, menu 'where do you want to install window', which is supposed to have a Format option, it doesn't!
View 7 RepliesI recently did a clean install of Windows 7 pro (64 bit) over an XP pro (32 bit) with 2 HD. The install proceeded without any major "hiccups". After the install, I noticed that when I try to access files on the "D" drive --- my second, I get error messages stating "user does not have access". I have tried troubleshooting but to no avail. Really would like to access those files. Both drives "show" NTFS where they were both FAT32 prior to the new OS. I don't understand how I can access the files on the "C" drive but not on the "D" drive. The files that I would most like to access are *.doc and *.pdf.
View 1 Replies View RelatedI bought an HP desktop about 2 years ago with vista 64 bit on it and it has been crappy ever since. I've had problems with programs not being recognized, things not installing at all when they should, and it freezing up for no good reason. Anyway, I went out and bought Windows 7 ultimate the full version. I saved the few files I have on a jump drive and I want to completely wipe out the hard drive and install windows 7 and start from scratch.
View 9 Replies View RelatedRecently did a clean install of windows 7 on my laptop but when I finished the install, I noticed that there still 158 gb used space on my hardddrive. Is this normal? I thought I had reformatted the entire system as i don't have aceess to any of my pre-existing files...
View 2 Replies View RelatedI purchased an Inspiron 15R today and wanted to do a clean install of Windows 7 right out of the box. I'm using a Windows 7 disk from another machine.I formatted the drive and all of it's partitions (recovery etc.) and installed the OS. After booting though I get sent to an error screen that tells me Windows had an error starting up and that I should choose a way to startup with the usual safe mode etc. No matter what I choose it sends me to this screen. So I booted from the disk again to attempt to format and reinstall, but now I have no disk drives to install to.
I have run a diagnostics check and nothing seems to be wrong, the HDD is still being recognized in the BIOS. What can I do to get my HDD back and showing up in the install destination options?
What do I do now? I decided to replace my existing hard drive as I thought it was damaged due to viruses. I installed a new hard and then used my Windows 7 Ultimate DVD to install. I got as far as the above. If this question has been answered somewhere else on this site
View 3 Replies View RelatedI currently have a 500GB SATA drive with 2 partitions, C: has Vista Ultimate in it and most of my (Really Important) data is in D:- I do not have an external drive with enough space to back up both partitions, only C: -- If I install Windows 7 on C:, will I also lose all the data in D: (Partition 2)?I want to be 100% sure I won't end up with data loss on D: if I do a clean install on C:
View 11 Replies View RelatedI have Windows 7 rc running on one of my 2 ide drives, with XP on an SATA drive - dual booting.
I purchased a 500gb SATA drive to replace the the 2 ide drives
The plan is to:
- connect the new drive while shutdown
- boot into XP
- Partition new drive, with the first partition active(with partition Magic).
- Transfer non-OS partition data to the new ones
- shut down and disconnect the ide drives
- insert Windows 7 disc and perform install on first partion of new drive.
I understand that the MBR is on the Windows 7 partition.
Will I have any problems with the XP install, or will the new Windows 7 install create a new MBR to allow dual boot?
I know I'll have issues with drive letters. But other than the XP, and Windows 7 partitions it's just data - no programs.
Or, are there any other problems you see with my procedure?
Is Windows 7
- x64 ?
- the original installed OS on the system
- full retail version
- What is the age of system (hardware)? approx. 1 year, ssd drive new
- What is the age of OS installation (have you re-installed the OS?) clean install
I have recently (4 days ago)aquired a new Crucial 128Gb ssd drive and performed a clean installation of windows 7 64bit, since then i have been experiencing random BSODs (3 times so far)All software is genuine. Have performed full malware and antivirus check. Results are clean.
I own Windows Vista 64bit, and have ordered Windows 7 Professional 64bit upgrade. How do I do a clean installation of Windows 7 on a new hard drive?
View 7 Replies View RelatedI want to do a clean install of my purchased Windows 7 from Windows 7 RC. The problem is I have a lot of data that I want to keep and since it is about 500GB in size, i have no cheap way of backing it up (obviously considering buying another HDD, but i'd rather not for now). I was thinking that maybe I should partition my 1TB main HDD into 2, and transfer all my data over to new partition, format/clean install the old one and lastly merge the partitions. Is this possible?
View 5 Replies View RelatedI'm doing a clean install on my computer, and it's going alright until it asks me to choose which hard drive I want to install Windows 7 on. Apparently I have 2: a C drive and a D(Recovery) drive.What should I do in this situation? Should I just install on the C drive, or should I do what it says here: Partition the Hard Drive in a Windows 7 Install and delete the partitions and create a new one.
View 7 Replies View RelatedI have a Core 2 Duo PC with 2 SATA internal drives:
Seagate 320 gig, with C and D partitions. C contains a legit retail upgrade version of Vista Home. D is for data.
Western Digital 640 gig, with a single E partition, currently used as backup.
I ordered a Windows 7 Home Premium retail upgrade at the discounted price a few months ago and expect it in a month.
My Seagate drive is running low on space and I want to retire it. I would like to boot to the Win 7 DVD, have my Vista install on the Seagate recognized, and then do a clean install of Windows 7 on the Western Digital drive, currently E.
I hope to buy another considerably larger backup drive shortly to replace the Western Digital as a backup drive.
Will the WD drive be available as a location for the installation in these circumstances?
Any previous time I have installed MS operating systems, I always chose to install to the same drive as the existing OS. This time things are different due to little space on the Seagate drive. Windows 7 would certainly fit on my current C, but I want to retire that drive.
Or will this remain a complete unknown until some time after October 22?
Or will I be forced to install to the Seagate and then somehow migrate the install to the WD?
I have not played with the RC, so I don't know what options are normally presented during the install.
I have download windows 7, backed up all my drivers and copied all my important info onto my external Hard drive and am about to try and clean install windows 7.
But do i have to partition the hard drive? My Dell laptop has a 110GB hard drive which came already partitioned. 10GB is called 'Recovery', do i need to do the same and make a larger partition and install Windows 7 or just leave it as it is?
I have a dead computer, it was a p4 winXP box 6+ years old. I will be assembling a new computer with 64 bit processor and SSD boot drive. I have a full XP license. I would prefer to buy an 'upgrade' version of Windows 7, but will I be able to install an upgrade version of windows 7 on a clean, blank drive? I would strongly prefer not to have to install XP and activate it just to reinstall windows 7. The additional factor is that some people have posted in forums that an 'upgrade' from a 32 bit os to 64 bit windows 7 does not work.
I would prefer to hear from someone who has actually done it and succeeded or failed, not 'it should work' or 'it should not work', because I can find people posting both ways theorizing that it should or should not.
I just put in a new hard drive and installed my Windows 7. Under properties / General there is an option to "Compress this drive to save space." By checking this does it compromise performance at all?
View 2 Replies View RelatedI decided to replace my hard drive because it seemed to have viruses that were making it run incredibly slow. I put in a brand new hard drive and proceded to run the Windows 7 Ultimate disk. I got as far as the beginning of the actual installation (after telling it what partition to put it on) and it ran for a few minutes and then I got the errror message 0x80070057.
View 2 Replies View RelatedI'm currently doing a clean install of windows 7 64 bit on my 32 bit XP computer, I used the upgrade advisor beforehand and it said a lot of my programs where 64 bit compatable, and a large chunk of them are on my other hard drive (the one im not installing windows 7 on). After the install is finished will they be useable or will I have to reinstall them?
View 1 Replies View RelatedDoes anyone know a good website to lead me through reformatting my C drive? I ran a registry scan that came up with 640 errors. I think all the problems I had with my defective RAM contributed to that? How do I make sure I have all the drivers I need and everything will work with a fresh install of Win7? All my media and documents are on the D drive, so I don't need to worry about that
View 4 Replies View Relatedhow to reformat my drive c with existing Windows 7 and reinstall Windows 7 again?
View 5 Replies View RelatedMy HP mini laptop has been distructed its program and the Swedish keyboard and word program turn up side down...I want to reboot or reformat so it will be in its normal program.
View 1 Replies View RelatedSo I'm trying to reformat my HD, and I'm having quite the time doing so. I have borrowed and Windows 7 disk from a buddy of mine and was going to reformat my HD and then buy a key online, but here is my problem:
I put the disk into my DVD Drive and restart, I immediately go into BIOS and make sure that my DVD-RW drive is first choice in boot order, it is. Upon restarting, it just does a normal boot process, it doesn't give me the option to boot from disk.
Anyways I have computer that I owned for a year now and have decided to reformat the computer due to some difficulties with it such as sluggish performance..windows processes getting stuck etc. and I have way to many programs to find out the root of the cause, but with the lack of experience on reformatting computers I may end up with errors in the end, I've searched up some forums like these as well on how to properly reformat a computer with windows 7 OS but just so I don't miss anything I would like to request if anyone has a Step by Step guide on how to do this. Also if you must know here are my PC specs and the software CDs drivers etc that I had when I was first setting up the pc.[CODE]
View 3 Replies View Relatedcan i instal windows 7 on a dynabook? if so how do it do it ?
View 1 Replies View RelatedI have a problem for a Mac formatted WD My Passport external drive. PC recognizes the WD Smartware part of the disk but not the data. I want to reformat the whole drive to Windows 7, but I can't see any options to do that.
View 1 Replies View RelatedI've ordered new parts for a new computer and I read that I could transfer the license being used on this (current) computer to the new one because I have the full version of Windows not the OEM. I plan on (if possible) transfering my windows 7 license to the new computer/SSD and use this old hard drive for storage/backup. But I'm a little confused/unsure about a few things: 1. Do I install Windows 7 and activate it on the new computer/SSD first and then remove Windows 7 from the old hard drive? Or do I have to remove it from the old computer before attempting to install on the new one, 2. How do I remove Windows from the old drive? I haven't reformatted before but from what I've read from guides, I use the windows CD to reformat, but it reinstalls a clean version of Windows. How would I clean the old drive without reinstalling Windows?
View 1 Replies View RelatedI have been getting frequent BSOD's on my 18 month old Dell XPS 17 L701x laptop, so I completely wiped the hard drive and reinstalled windows 7 on it. However the BSOD still persists. The error message given states, 'STOP Error0x000000D1:DRIVER_IRQL_NOT_LESS_OR_EQUAL'. I am running Windows 7 home premium 64bit OEM. I will attach the dump files to this post.
View 3 Replies View Relatedhow to reformat a dell hardrive and install windows 7
View 3 Replies View RelatedI recently purchased a new laptop - Toshiba R835 P50x - and replaced the 640gb 5400rpm drive with a 120gb ssd(Kingston v100). I cloned the 640gb, 3 partition(2 hidden) drive to the SSD(all 3 paritions) and replaced it in the laptop and everything is working just fine I now have the original drive in a usb external enclosure and would like to use it for an external back-up drive.What the best(and easiest) method reformatting that drive to eliminate the hidden partitions, and give me just one?
View 4 Replies View RelatedShould i flash my bios to get rid of infection
how do i reformat the external hard drive
or what tools can i use.
RAID-1 DRIVE PULL OUT TO TRANSFER ...
I have a pair of mirrored RAID-1 drives (these have been removed and sitting as is for about 6months or so)
There is no important data on this that im concerned about preserving.
What i want to do is reformat them into 2 separate single storage HDD'safter installing them into my new system. or will it mess up my new system?