Hard Drive Options Not Showing Up For Clean Windows 7 Install
Apr 6, 2012
I purchased an Inspiron 15R today and wanted to do a clean install of Windows 7 right out of the box. I'm using a Windows 7 disk from another machine.I formatted the drive and all of it's partitions (recovery etc.) and installed the OS. After booting though I get sent to an error screen that tells me Windows had an error starting up and that I should choose a way to startup with the usual safe mode etc. No matter what I choose it sends me to this screen. So I booted from the disk again to attempt to format and reinstall, but now I have no disk drives to install to.
I have run a diagnostics check and nothing seems to be wrong, the HDD is still being recognized in the BIOS. What can I do to get my HDD back and showing up in the install destination options?
View 1 Replies
ADVERTISEMENT
Mar 9, 2011
I bought an HP desktop about 2 years ago with vista 64 bit on it and it has been crappy ever since. I've had problems with programs not being recognized, things not installing at all when they should, and it freezing up for no good reason. Anyway, I went out and bought Windows 7 ultimate the full version. I saved the few files I have on a jump drive and I want to completely wipe out the hard drive and install windows 7 and start from scratch.
View 9 Replies
View Related
Jan 4, 2013
Recently did a clean install of windows 7 on my laptop but when I finished the install, I noticed that there still 158 gb used space on my hardddrive. Is this normal? I thought I had reformatted the entire system as i don't have aceess to any of my pre-existing files...
View 2 Replies
View Related
Dec 17, 2011
What do I do now? I decided to replace my existing hard drive as I thought it was damaged due to viruses. I installed a new hard and then used my Windows 7 Ultimate DVD to install. I got as far as the above. If this question has been answered somewhere else on this site
View 3 Replies
View Related
Dec 22, 2010
I'm doing a clean install on my computer, and it's going alright until it asks me to choose which hard drive I want to install Windows 7 on. Apparently I have 2: a C drive and a D(Recovery) drive.What should I do in this situation? Should I just install on the C drive, or should I do what it says here: Partition the Hard Drive in a Windows 7 Install and delete the partitions and create a new one.
View 7 Replies
View Related
Oct 27, 2009
I have download windows 7, backed up all my drivers and copied all my important info onto my external Hard drive and am about to try and clean install windows 7.
But do i have to partition the hard drive? My Dell laptop has a 110GB hard drive which came already partitioned. 10GB is called 'Recovery', do i need to do the same and make a larger partition and install Windows 7 or just leave it as it is?
View 9 Replies
View Related
Dec 19, 2011
I decided to replace my hard drive because it seemed to have viruses that were making it run incredibly slow. I put in a brand new hard drive and proceded to run the Windows 7 Ultimate disk. I got as far as the beginning of the actual installation (after telling it what partition to put it on) and it ran for a few minutes and then I got the errror message 0x80070057.
View 2 Replies
View Related
Jul 26, 2012
I'm trying to do a clean install of Windows 7 Ultimate x64. I boot from my CD drive, Windows loads the files and then the blue background comes up but there is nothing to click on.Basically I get to step 3 here but have nothing to click on to continue. Clean Install Windows 7
View 1 Replies
View Related
Nov 6, 2011
I have a HP Pavillion dv6000 that was running vista. i have done a clean install of Windows 7 Ultimate. In Vista I had a Nvidia Graphics card and drivers, but now it shows that I have a Standard VGA Graphics Adapter, under the device manager. I have downloaded a number of drivers from Nvidia, but all fail, they say there is no device that they are compatible with. Should I re- insatll with the original disk that came with my computer and do a Windows 7 UPGRADE, will that make a difference?
View 4 Replies
View Related
Jul 16, 2011
My hard drive is not showing up. It did a couple of days ago. I do not remember what happened.
View 21 Replies
View Related
May 2, 2010
I have a SATA hard drive which shows up in BIOS, but not in 'Computer Management' or 'Device Manager'. Does anyone know why this could be?Surely if it was dead, it would not be in BIOS, but Windows doesn't seem to see it anywhere.
View 8 Replies
View Related
Mar 6, 2011
Some files in my external drive has a lock symbol near them, some don't. Why is this happening?
I am using Microsoft Sync and recently I had to use "Run as Administrator" for it because some files were "access denied". (I am using the drive in different operating systems in different partitions).
Should I run Sync in administrator mode, or regular? How should I arrange the security for the drive? Should I add users or everyone? (now it is creator owner, system, administrators and me -I am administrator and only user-).
I got confused because before I didn't need to use the administrator mode for syncing and I don't want it to cause problems when syncing, not to miss any files.
(When I try to give myself -username-pc/username- full control, after that it still returns to not full control, no permissions for the drive are inherited )
View 2 Replies
View Related
Oct 15, 2012
I am having problems getting one of my hard drives to show up in windows 7 64 bit enterprise. What seems to go on is that some times is there and ready to go and other times it doesn't even show up on the My computer screen.
View 1 Replies
View Related
Apr 6, 2012
I have a PC on which the hard drive died. I had previously done the Advisor and it said everything is OK for new install of Win 7 Home Premium.
I removed old hard drive and 2 gigs of memory (now 2 gigs installed) installed new hard drive, set appropriate ( i think) BIOS parms. When I start the DVD I get the 'loading files' message and the colorful logo then a blank screen with a large arrrow cursor -- and nothing. Wait 5, 10 15 minutes and the only hint of activity is the hard drive light is flickering about once every 2 seconds. I've now waited for over an hour and still nothing else.
I've tried to do all the things that have been suggested for others who have had problems but it hasn't helped. Machine is a Dell 4700C with 3.4 GHz processor , 2 gigs of memory, only keyboard, mouse, and monitor attached in addition to the hard drive.
View 9 Replies
View Related
Oct 13, 2012
How to run through a quick clean install of windows 7 and my hard drive as I believe I have some nasty root-kits. All I need to know is where I can download windows 7 again - I have product key). And some basic steps doing the clean wipe. Also could you take me through partitions and how to do one? I want my hard drive completely clean restoring my system.
View 19 Replies
View Related
Jan 7, 2012
As some of you may know i encountered the infamous "BOOTMGR MISSING" error which i could find no fix for and decided to do a fresh install of the OS.
Now at the Windows 7 Installation i selected the language and then selected Custom install and get a page asking which hard drive partition i would like to install the OS on. Now here is where somethings wrong. The only thing listed is the 100mb System reserved partition. How do i get the other partitions listed.
View 10 Replies
View Related
Jan 6, 2012
After installing Windows 7 on my PC all my hard disks(4) are display as removable disks in the icon of safely remove hardware on the taskbar. Is it related with enabling ACHI mode on my system?
View 1 Replies
View Related
Sep 18, 2012
I have a gateway computer running windows 7 ultimate and im trying to add another hard drive but its not showing up anywhere. My primary hard drive is a 3.5 sata 500gb and im trying to add a 3.5 IDE 200gb hard drive. I've looked in computer management and everything but the hdd is not showing anywhere.
View 3 Replies
View Related
Jul 9, 2009
I have two SATA harddrives 0 and 1. I had Vista on firsst partition on 1 dual booting with XP on 0. When I came to load W7 it did not see drive 1 so I ended up booting it on a partition on drive 0. It is still a dual boot installation.
The problem is that W7 still does not see drive 1 (visible in XP and previously Vista)
It is not visible in computer management or elsewhere. The drive has 3 primary partitions none of which are logical.
View 2 Replies
View Related
Aug 3, 2011
I just got a new Packard bell go external hard drive which I used for a couple of days with no problem. btw it has never fell or had any physical damage. I plugged it one day into the PC and it couldn 't be detected in my computer. it shows up in devices and printers and also in disk management. I read on some forums to try and initialize it but it gives me an error saying cyclic redundancy check. I 've tried everything but still not working. this is a new hard drive which has never fell and no physical damage. and please don' t tell me to return it cos it was bought in another country. the only option right now is to fix it?
View 14 Replies
View Related
Mar 23, 2012
I have a problem My 3TB Western Digital Hard Drive is not showing up on any PC I connect it to. The light on the drive itself is on, but no where on the PC does it register.
I am pretty sure the disks aren't spinning either, but that is probably because the computer isn't picking it up, and no vice-versa.
View 5 Replies
View Related
Jan 12, 2010
So I recently purchased and installed a new hard drive in my PS3. To do that I had to reformat my Western Digital 250 GB hard drive to FAT32 format. Ok, so that's all well and good but I then decided to take my PS3, 60 GB HD (the brand escapes me, but it's a big manufacturer of hard drives) and put it in an external hard drive enclosure. I figured that it's a perfectly good hard drive so there was no sense wasting it. Anyway, as technologically impaired as I might sound after this (which I'm really not) I feel compelled to divulge that I actually did not know that two external hard drives shouldn't be too close to each other. As soon as I put one on top of the other, the 60 GB hard drive beeped and a message popped up saying it needed reformatting. So after reformatting everything a second time, I plugged in the hard drives and the 60 GB one showed up but my 250 GB one did not.
It's showing up everywhere else (disk management, device manager) but not in My Computer. So I have no access to it at all. Also, I did not need to reformat the 250 GB HD since my computer gave me no message indicating that I should. I'd rather only use reformatting as an absolute last resort since it takes HOURS but if it's necessary that I'll have to break down. Throw other options at me first though
View 9 Replies
View Related
Dec 9, 2012
I'm installing Windows 7 on an older PC. It was running on it before but my hard drive bit the dust. When I boot from the install disk and go to install it, there are no hard drives listed and the message says "No drives were found. Click Load Driver to provide a mass storage driver for installation."
It's an old Dell Dimension 8300 with a couple WD hard drives in it, a 250GB and a 500GB. I could get the model numbers if that's necessary.
View 6 Replies
View Related
Apr 19, 2012
i was wondering if anyone has any programs they could recommend to use to wipe a hard drive clean before reinstalling windows 7, I noticed you have this CCleaner 3 link on here CCleaner - Download.com If i put that on a disk and started it up as i would to reinstall can that wipe the disk clean?
View 9 Replies
View Related
Jun 16, 2012
I'm a little confused about what kind of OS I'm running - a 32 bit one, or a 64 bit version of windows 7.When I'm looking at the "Performance information and tools" in the control panel it seems that my system is running 64 bit version of windows 7.But, when I look in the advanced settings (from the screen resolution section of the control panel), in the "Adapter" tab, I'm looking in "list all modes" and I only have 32 and 16 bit options to choose from! So what is going on? am I running 64 bit or 32 bit? and is there any point of upgrading to 64bit or down-grading to 32 bit?
View 8 Replies
View Related
Aug 23, 2012
I'm trying to do a clean reinstall, but I can't reformat the drive. I don't get very far, menu 'where do you want to install window', which is supposed to have a Format option, it doesn't!
View 7 Replies
View Related
Sep 16, 2009
I would like to NOT have my two SATA hard drives and my DVD/CD player not showing as removable hardware in the list on my task bar. Any ideas anybody?
View 1 Replies
View Related
May 5, 2012
I have a dead laptop, I believe it was the hard drive, anyway. I took the hard drive out, connected it to my Network computer, all looks well, I heard it spinning (Good sign?) and then I booted the computer, it didn't actually load windows 7, it spent like a good 10-15mins saying "Loading windows 7" so I turned it off, moved the SATA cable to a different slot, it booted.. then when trying to detect the drive, it doesn't exist. I will need to format it, as it does have windows 7 on that drive aswell.
View 1 Replies
View Related
Mar 13, 2012
just replaced my 350g hd to a 750g hd in my laptop. loaded the ghost image and when i open the computer icon it show me the same amount of storage i had before?
View 2 Replies
View Related
Sep 24, 2012
After a hard drive failure on a 500 GB hard drive, I restored the image onto a new 1TB hard drive.
Windows is showing the C: drive with 224 GB and partition D: with 225 GB.
I'm guessing that Windows doesn't know that it's on a 1TB drive now, so how do I get access to the missing 500GB?
View 4 Replies
View Related
Aug 15, 2012
Hard drive is full but not really. I think it is a virus because I removed a bunch of programs and there is very little in computer and it said I had 9GB available the next day went to 180KB free out of 296GB. I can't even take pictures off to wipe out and start over.
View 2 Replies
View Related