After installing Windows 7 on my PC all my hard disks(4) are display as removable disks in the icon of safely remove hardware on the taskbar. Is it related with enabling ACHI mode on my system?
View 1 RepliesI would like to NOT have my two SATA hard drives and my DVD/CD player not showing as removable hardware in the list on my task bar. Any ideas anybody?
View 1 Replies View RelatedEnglish is not my first language but i m trying to express my problem, i had a system with windows7 OS then i installed Ubuntu as a dual boot system but some thing happens it removed windows 7 from list. When i used Ubuntu i don't liked it very much so once again change to windows 7 environment... but now my whole drive is not showing , it showing only partial drive. note i don't have any PC to make my hard disk secondary.
View 1 Replies View RelatedI'm building my first pc and I'm getting blocked right at the gate. I have a 64bit Windows 7 installation disk (home version, "for system builders" ). This is a fresh installation, I don't have any other OSs for this build so my options are limited.
It starts out fine, but when I get to the point where I am to pick a hard drive to install to, it won't accept anything. It will allow me to delete partitions but clicking on "New" or "Format" (under the advanced options) makes it think for a few seconds, then just stop like nothing happened.
I have tried formatting it through gparted, but no matter what I do it complains that the drive has been formatted with in GPT, even when the drive is completely clean and unformatted.
I'm using a Samsung Spinpoint F3 HD103SJ 1tb hard drive
on the MSI P67A-GD65 mobo
with intel i7 2600k.
When we install windows 7 our E drive is hidden.
View 3 Replies View RelatedIn my Win 7 setup, I have a drive that is called JRemovable Disk). It seems to be "Canon MX700 series USB Device". I do not know what it is for, and I really do not want it. Could someone describe it to me, and tell me if I should get rid of ot, and, if so, how?
View 6 Replies View RelatedI have unfortunately contracted a virus on my removable hard drive. It is an autorun.inf virus which creates shortcuts of all my folders on my drive and makes all the actual folders hidden. I believe it is refereed to as the recycler virus. I have not plugged the drive into my Windows 7 OS, and don't plan on doing so. I have Ubuntu installed however and plan to use that to format my drive as from what I've read autorun.inf viruses dont affect linux. Is this true? If I plug my hard drive into the Ubuntu OS will everything my fine?
I have an eSATA drive that has stopped functioning properly. I was trying unsuccessfully to install some completely unrelated software when I noticed that my eSATA drive was presenting differently. Under My Computer it now said that the drive was empty and there were four drives that appeared that said "Removable Disk (G)", "Removable Disk (H)", "Removable Disk (I)", and "Removable Disk (J)". When I select my eSATA drive, it says 'folder empty'. When I select one of the removable disk drives it says "Please insert a disk into removable disk (?). Whenever I reboot the computer with the eSATA drive disconnected, all five disk drives go away. I don't remember changing any settings or anything like that. One thing is odd that in device manager, the eSATA drive comes up as a SCSI drive. The device manager shows it as "WDC WD10EADS-65M2B1 SCSI Disk Device", but it is actually a "WDC WD500F032".
[System Summary]
Item Value
OS Name Microsoft Windows 7 Home Premium
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name HOME
[code]...
I purchased a new PC with Windows 7 in June 2012. It came with a Samsung optical disk containing Windows 7. I am eligible for the $14.99 USD upgrade to Windows 8.Will there be an installation disk for Windows 8 available at this price and if not, then how much more will it cost?If not, then how should I ensure that I can easily install Windows 8 after a hard disk crash? Do I have to keep my Samsung optical disk of Windows 7?
View 5 Replies View RelatedI had installed ubuntu 10.10 on my lap Dell N5010 model recently, After few days i got blue screen error message then i decided to format my hard disk, with a windows 7 ultimate version which i got through internet. then i thought to format the system completely so while installing i went to advanced disk options and deleted all drives when i did this the drive which has name primary is detected after installation. the drivers which are under category of logical are not getting displayed in my computer and also in partition manager it is showing as unusable space.
View 1 Replies View RelatedI have a 2.8 Ghz, P4 processor with 768 (512 + 256) MB ram and an Asus p5rd1-vm motherboard with a 128 MB ATI-Radeon Graphics Card. I have been running Windows XP for years. I have decided to upgrade to Windows 7 finally after reading all the reviews. However, During installation, my hard disk is not being detected (There is no drive on screen which I can format or set up on.) Can anyone help? Do I need to update my BIOS?Also, I recently changed my hard disk (upgraded it) and XP has been installed and is running fine.
View 3 Replies View RelatedMy hard drive is not showing up. It did a couple of days ago. I do not remember what happened.
View 21 Replies View RelatedI have a SATA hard drive which shows up in BIOS, but not in 'Computer Management' or 'Device Manager'. Does anyone know why this could be?Surely if it was dead, it would not be in BIOS, but Windows doesn't seem to see it anywhere.
View 8 Replies View RelatedI am preparing a laptop for sale, and have carried out a fresh install of Windows (booting from recovery CD). During this process, I selected 'Custom installation'followed by the hard disk partition containing my personal data and 'Drive options (advanced)', followed by 'Delete'. Is this a secure method of erasure or should I take additional precautionary steps before selling?
View 3 Replies View RelatedI have one more problem with my laptop this time . i have a Dell xps 15 , i re partitioned it and made my C drive of 141 GB . i installed all the required application and from the last few days i was watching the there is less space in my C drive than it should be there. i checked out the properties and found out that only 32.6 GB of disk space is utilized out of 141 so there should be around 108 GB free instead it shows me that only 92.9 gb is free .i cleared out the temp folder and there is nothing except 3-4 files which is of some Kbs . then where is the rest 15 GB gone ? is there a virus in my pc which is eating up the space ? i am really freaked out
i have a genuine windows 7 ultimate and microsoft security essential and it is updated and i scanned it and found nothing . btw there is something more , few hours ago there was 94.8 GB free , i installed a game in another drive and i removed it after 2-3 minutes coz i didn't liked it , so after un installing the game i saw there there was 93.4 GB left in my c drive again , i removed files from the temp folder but nothing happened and now there is just 92.9 gb left ! what is happening ! i am really freaked out now
I am having problems getting one of my hard drives to show up in windows 7 64 bit enterprise. What seems to go on is that some times is there and ready to go and other times it doesn't even show up on the My computer screen.
View 1 Replies View Relatedi have conversion data card (conversion card sata hard disk) installed on my new i3 cpu. But during the boot proces the hard disk is not recognising.
View 1 Replies View RelatedAs some of you may know i encountered the infamous "BOOTMGR MISSING" error which i could find no fix for and decided to do a fresh install of the OS.
Now at the Windows 7 Installation i selected the language and then selected Custom install and get a page asking which hard drive partition i would like to install the OS on. Now here is where somethings wrong. The only thing listed is the 100mb System reserved partition. How do i get the other partitions listed.
I purchased an Inspiron 15R today and wanted to do a clean install of Windows 7 right out of the box. I'm using a Windows 7 disk from another machine.I formatted the drive and all of it's partitions (recovery etc.) and installed the OS. After booting though I get sent to an error screen that tells me Windows had an error starting up and that I should choose a way to startup with the usual safe mode etc. No matter what I choose it sends me to this screen. So I booted from the disk again to attempt to format and reinstall, but now I have no disk drives to install to.
I have run a diagnostics check and nothing seems to be wrong, the HDD is still being recognized in the BIOS. What can I do to get my HDD back and showing up in the install destination options?
If I update the BIOS on my Intel motherboard to any one of the three most recent BIOS's, my add-in Intel network card (located in one of the pci slots) shows up as a removable device in the taskbar (Much like a USB device; for example a passport removable hard drive or flash drive). However, the motherboard's network controller does not exhibit this behavior.
Intel support is telling me that it can vary as to how the devices are detected by Windows and that this is normal. I have never ever seen a pci slot card being detected as a removable device in the 20 years that I have been using Windows, so I was wondering if what they are telling me is a valid statement? It seems kind of scary that this is happening.
[code]...
I have created an encrypted drive (X) on my system (Windows 7 - 64 bit) and wish to store my emails there. I did this successfully in Vista.To do this I need to change X:/ from a Removable Disk to a Local Disk, please can somebody explain to me how and wehre to do this?
OS Name: Windows 7 Home Premium
Version: 6.1.7601 Service Pack 1 build 7601
System Type: x64-based PC
My SONY VAIO VPCEB15FX laptop has been getting the S.M.A.R.T failures. I checked with SONY and since my laptop is more than 12 months old - could not get them to help me with this issue without paying (laptop started having issues exactly after 15 months- not so good for a branded laptop). So i thought i will try to handle this myself, created the recovery discs, repair disk and backed up all the data in 15 DVDs. I bought a WD Scorpio Blue hard drive (WD5000BPVT - Advanced Format Drive) and replaced the same in my laptop and started off with the recovery discs. I chose to restore complete system and it proceeded. Once it completed the process - the system restarted and the OS Setup began - now comes the issue. When the setup started it throws this error "Windows setup could not configure Windows to run on this computer's Hardware" I ordered the SONY recovery discs - repeated the above RESTORE process - but still facing the same error?
View 9 Replies View RelatedSet up did not find any hard disk drives during installation?
View 1 Replies View RelatedI have a gateway computer running windows 7 ultimate and im trying to add another hard drive but its not showing up anywhere. My primary hard drive is a 3.5 sata 500gb and im trying to add a 3.5 IDE 200gb hard drive. I've looked in computer management and everything but the hdd is not showing anywhere.
View 3 Replies View RelatedI have two SATA harddrives 0 and 1. I had Vista on firsst partition on 1 dual booting with XP on 0. When I came to load W7 it did not see drive 1 so I ended up booting it on a partition on drive 0. It is still a dual boot installation.
The problem is that W7 still does not see drive 1 (visible in XP and previously Vista)
It is not visible in computer management or elsewhere. The drive has 3 primary partitions none of which are logical.
i updated this post. look above it to find the other one.
View 1 Replies View Relatedi have an hp pavilion slimline. (model: s5213w) i am upgrading my hard drive but my power supply is limited to having just one hard drive installed at a time. when i put the new one in i ran the disks given to me by HP. the first half of the installation works fine (the part where im putting all the diff cd's in) then it says to remove all cd's and windows will automatically start installing the software. (it may take up to 3 hours). then a black screen comes on. kinda like comand prompt and the cursor line just flashes. three hours later. same deal. any help on this issue? its SATA btw.. idk if that makes a difference.What im trying to install is windows 7 on a Brand New WD5000AAKX (western digital) hard drive. ive used these cds before on my previous hard drive (which came with widows 7 on them from HP) and they worked fine to re install windows 7. The paper that came with the cds from HP say to use them when you want to "upgrade to a new hard disk drive"do i have to create a partition inside it or something? i jsut put the blank hard drive in because i dont have the power supply hookup for 2...
View 1 Replies View RelatedI have a laptop which has a ATA HDD and I tried to install Windows 7 on it, but when you come to the window for choosing a partition, nothing shows up. I have tried to upload new drivers for the chipset on the motherboard from intel (Intel 865 Chipset) but no luck still it doesn't do anything. I am able to find the drivers and I guess it installs them but in the end nothing. So my second attempt was to try and bypass this. I took another laptop and pluged in the hdd there and tried the installation, everything went smooth, when the first restart was prompted I took out the HDD and plugged it in my comp. Now windows starts up but only up to the logo and than restarts, over and over. I tried to install all over again but it still doesn't recognize the HDD on my laptop.
View 9 Replies View RelatedI get to the part of the installation where you select a partition/drive, and there is nothing there. I have tried using different two different HDD both spin up but the installation doesn't see them. I have also switched out SATA Cables, used different power connectors, even tried loading drivers, and have reset the BIOS by removing the CMOS Battery.
Specs:
GIGABYTE GA-Z68AP-D3 Intel Z68 Motherboard
Intel Core i5-2500 Processor
4x 1GB DDR3
Radeon 4870 Graphics Card
530 watt Power Supply
Seagate 320GB 7200 RPM SATA HDD ( tried to install first, no luck moved to the other HDD. Only one at a time connected. )
Maxtor 500GB 7200 RPM SATA HDD
No Disc Drive Atm Installing from Flash Drive?
I just got a new Packard bell go external hard drive which I used for a couple of days with no problem. btw it has never fell or had any physical damage. I plugged it one day into the PC and it couldn 't be detected in my computer. it shows up in devices and printers and also in disk management. I read on some forums to try and initialize it but it gives me an error saying cyclic redundancy check. I 've tried everything but still not working. this is a new hard drive which has never fell and no physical damage. and please don' t tell me to return it cos it was bought in another country. the only option right now is to fix it?
View 14 Replies View RelatedI have a problem My 3TB Western Digital Hard Drive is not showing up on any PC I connect it to. The light on the drive itself is on, but no where on the PC does it register.
I am pretty sure the disks aren't spinning either, but that is probably because the computer isn't picking it up, and no vice-versa.