Ide Hard Disk Installation In I3
Jan 30, 2012i have conversion data card (conversion card sata hard disk) installed on my new i3 cpu. But during the boot proces the hard disk is not recognising.
View 1 Repliesi have conversion data card (conversion card sata hard disk) installed on my new i3 cpu. But during the boot proces the hard disk is not recognising.
View 1 RepliesI purchased a new PC with Windows 7 in June 2012. It came with a Samsung optical disk containing Windows 7. I am eligible for the $14.99 USD upgrade to Windows 8.Will there be an installation disk for Windows 8 available at this price and if not, then how much more will it cost?If not, then how should I ensure that I can easily install Windows 8 after a hard disk crash? Do I have to keep my Samsung optical disk of Windows 7?
View 5 Replies View RelatedEnglish is not my first language but i m trying to express my problem, i had a system with windows7 OS then i installed Ubuntu as a dual boot system but some thing happens it removed windows 7 from list. When i used Ubuntu i don't liked it very much so once again change to windows 7 environment... but now my whole drive is not showing , it showing only partial drive. note i don't have any PC to make my hard disk secondary.
View 1 Replies View RelatedMy SONY VAIO VPCEB15FX laptop has been getting the S.M.A.R.T failures. I checked with SONY and since my laptop is more than 12 months old - could not get them to help me with this issue without paying (laptop started having issues exactly after 15 months- not so good for a branded laptop). So i thought i will try to handle this myself, created the recovery discs, repair disk and backed up all the data in 15 DVDs. I bought a WD Scorpio Blue hard drive (WD5000BPVT - Advanced Format Drive) and replaced the same in my laptop and started off with the recovery discs. I chose to restore complete system and it proceeded. Once it completed the process - the system restarted and the OS Setup began - now comes the issue. When the setup started it throws this error "Windows setup could not configure Windows to run on this computer's Hardware" I ordered the SONY recovery discs - repeated the above RESTORE process - but still facing the same error?
View 9 Replies View RelatedI have a 2.8 Ghz, P4 processor with 768 (512 + 256) MB ram and an Asus p5rd1-vm motherboard with a 128 MB ATI-Radeon Graphics Card. I have been running Windows XP for years. I have decided to upgrade to Windows 7 finally after reading all the reviews. However, During installation, my hard disk is not being detected (There is no drive on screen which I can format or set up on.) Can anyone help? Do I need to update my BIOS?Also, I recently changed my hard disk (upgraded it) and XP has been installed and is running fine.
View 3 Replies View RelatedSet up did not find any hard disk drives during installation?
View 1 Replies View RelatedI'm building my first pc and I'm getting blocked right at the gate. I have a 64bit Windows 7 installation disk (home version, "for system builders" ). This is a fresh installation, I don't have any other OSs for this build so my options are limited.
It starts out fine, but when I get to the point where I am to pick a hard drive to install to, it won't accept anything. It will allow me to delete partitions but clicking on "New" or "Format" (under the advanced options) makes it think for a few seconds, then just stop like nothing happened.
I have tried formatting it through gparted, but no matter what I do it complains that the drive has been formatted with in GPT, even when the drive is completely clean and unformatted.
I'm using a Samsung Spinpoint F3 HD103SJ 1tb hard drive
on the MSI P67A-GD65 mobo
with intel i7 2600k.
When we install windows 7 our E drive is hidden.
View 3 Replies View RelatedI am preparing a laptop for sale, and have carried out a fresh install of Windows (booting from recovery CD). During this process, I selected 'Custom installation'followed by the hard disk partition containing my personal data and 'Drive options (advanced)', followed by 'Delete'. Is this a secure method of erasure or should I take additional precautionary steps before selling?
View 3 Replies View RelatedAfter installing Windows 7 on my PC all my hard disks(4) are display as removable disks in the icon of safely remove hardware on the taskbar. Is it related with enabling ACHI mode on my system?
View 1 Replies View Relatedi can not install dual-both window7 and window8 on my computer.i think that may be my hard is dynamite.not basic.
View 13 Replies View Relatedim usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir.
View 6 Replies View RelatedI have IOmega 1 TB hard drive. 2 days ago, my comp restarted suddenly after which my external drive is corrupted.I get the error 'H: is not accessble' The disk structure is corrupted and unreadable.It shows up in the disk management as RAW file system,I have almost 700 GB of important documents, pictures & files that I don't want to lose.Does anybody know of any good recovery software that can help.
View 5 Replies View Relatedin my hardisk with G: size 465gb xp shows that 74.86 gb is remaining space......while space used is 0 , there are no hidden files, nothing in the disk K: size 186gb same as above and remaining is 35 gb according to windows xp i: size 196gb .in this only 9 gb is used and xp shows that 10gb is remaining//
i remember, last week everything was ok and all of sudden this problem has occurred. all other drives are ok only these three are way over their own heads.
my system is
Intel Core i5-2300 cpu@2.8ghz
2.79ghz,3.48 GB of RAM
and windows is 32 bit/
I have few questions on Windows 7 Upgrade. Currently I'm using windows vista home premium 64 bit and I bought an windows 7 home premium 64 bit upgrade disk.
first thing is I want to format my previous operating system and all the data in my laptop and install windows 7 in it using the Upgrade disk.
second thing is I don't have my vista installation disk with, my laptop was pre-installed with vista so in future if I want to switch can I get back VISTA using system restore.
third is can i install windows 7 on a new hard disk using a windows 7 Upgrade disk?
hard drive 1: (vista)Plugged the hard drive in, the start up screens and the bios both recognise it, yet under 'My Computer' and when trying to install vista on it, it wasn't showing up when asked where I wanted to install vista to. I'm positive I have wired it up properly as there's only 2 wires which are completely different from one another. I do have with me the original installation disk that came with the PC also.
hard drive 2: (windows 7)Same sorta situation with the PC not finding it really. Though his PC only has enough power connections for the 1 hard drive and he wants both at once (there's 2 power connections that fit, but the other goes to the CD drive) Also in the 'cage' bit there is only room for 1 hard drive. also I can't seem to make a installation disk, when I have the old hard drive in, it created a repair disk, not installation disk.
I don't know what is my problem because is not the first time that usb external hard drive is working fine until get damage and said " it need to be formatted " and lost all the INFO because I have to format again the disk to be usefull. Also it is not the same hard disk.
View 1 Replies View RelatedSo my computer is royally screwed and after looking for solutions for a few days I've decided to just reformat the whole thing. I have all my important files backed up but the problem is I don't have a windows 7 installation disk or any backup disks or anything ( my computer didn't come with any of that...or if it did its gone soo) is there a way for me to reformat it without that?
View 14 Replies View RelatedI tried to reformat my dads hard drive to reinstall windows 7. It was in 2 partitions, so I ran the windows 7 disc and it ran through the motions, I formatted the c to re-install windows and it wouldn't let me. I went into dos under diskpart to try and format it that way, still no luck. I connected it to my computer then under disk management deleted the 2 partitions so there was only 1 now which had the size i.e, 600GB Unallocated. I connected it back into my dads computer and ran the set-up again. Now the computer wont even detect the drive. I need to re-format the drive to like factory default, is this possible, also do I have to do it in dos.
View 6 Replies View RelatedI accidentally recently over wrote my windows C: hard drive by trying to dual install linux on my laptop. I downloaded and burned a windows 7 64 bit repair disk but I have no point to repair it from! So I think I need a clean installation, is there anyway I can also burn an installation disk.
View 2 Replies View RelatedI was having problems with my laptop being very slow and was trying to do a full system restore. I didnt have the battery in when i tried to do the restore and unfortunately half way through the charger came out and switched the laptop off. i turned it back on and it says i had to insert my windows disc which i dont have. it wont let me do anything else now. ive tried downloading windows to disc but when it gets back to the restore page it says i need to have the windows installation disc and wont let me restore from an earlier time as these have all been erased. its a dell inspiron n5030, with windows 7.
View 1 Replies View RelatedYesterday , randomly , when I turned on the computer I saw nothing but a black screen. It wasn't the black screen of death , looked like a windows black screen but it just wasn't displaying anything. Its almost like windows is operating normally in the background , its just not showing me. When I put the disk in it comes up occasionally and works fine , but when I shut down and turn it back on its back to the same ole thing.
I have windows 7 home premium , 32-bit. I read somewhere that I may need to check the boot order , but I have no idea how to do any of this.
I own a Dell xps M1530 with a: 2.0 ghz dual core processor, 3gb of RAM, and (currently) a 360gb 7200rpm hard drive. I have purchased Windows 7 professorial 32bit to upgrade from Vista. Not shortly afterwards my hard drive started to go so I bought a new one(better on of coarse) I want to upgrade the RAM in my laptop to 8gb and I need a 64bit os to do so. I now am using Ubuntu 64bit on my laptop until I install windows. I have legally got the installers for the 64bit version of Windows 7 professional. I am planning on using the same key for the 64bit version which after research I believe will work. Right now I am having problems installing 7. I would really like to not have to waste a DVD to install it. I used some Microsoft utility to extract the ISO to a thumb drive which, I believe is bootable in the purpose of installing 7. Every time I try loading the os from the Thumb drive I get this error message:
Error: Unknown file system
Grub Rescue
Also, the Setup.exe file for installing windows doesn't seem to run under a linux operating system even with wine.
My friend's Gateway laptop has problems and I want to install Windows again. But when I try to boot to the installation disk, after I select the DVD in the boot selection menu, I just get a blank screen with a flashing cursor. After a few minutes, one time I saw a message that said something like "bootmgr cannot be found" or is missing or something like that.
But the computer can successfully boot to a Puppy Linux boot disk.
My computer has been unable to boot to the Windows 7 installer for the past two days. My boot order is correct I have confirmed that the drive works (It runs a live CD of Ubuntu just fine). I have checked that the disk works (it boots fine in another machine). I have used this same disk on this computer before several times before with successful outcomes.
My diagnostics come back successful as well. I'm on a Dell Studio 1735 (from 2008). I'm really at a lost as to why it's not booting to the DVD. I'm currently typing this from my Ubuntu partition; I don't have convenient access to a Windows machine at this point.
lost install cd and i lost my security key
View 1 Replies View Relatedmy computer crashed and is trying to reinstall windows 7, all the files that were on my computer have been backed up and saved on th hard drive insider a specific file that the computer chose. The problem I am having is when I power the computer on the windows startup screen appears then a error message appears stating that the computer turned off or unexpectedly restarted click OK to restart computer to re-install windows 7. My computer was purchased brand new with all the software preinstalled, no disks were included or provided with the purchase. How can I or do I reinstall windows 7 when I do not hve the installation disk. Apperantly all software files/programs r an can be located within the hard drive of the computer I don't know where or how to even try to locate them.
View 2 Replies View RelatedI have a Lenovo Y560p 64-bit i7 machine sold without a recovery or re-installation Win 7 disk. It has a so-called OneKey Recovery button which will in theory recover or re-install Windows 7 from the O/S info stored on a special HD partition. But I would like a DVD-Rom that boots the computer and does a re-installation of Win 7 should Windows break down. How do I create such a disk?
View 5 Replies View RelatedA couple of weeks ago i started receiving an error on startup saying that Disk C: needed to be checked for constancy, Type of file is NTSF, Cannot open Volume for Direct Access due to a recent software package installation, please use system restore to a point prior to the software installation. There is not a restore point available to access as far back as i need to go. What do i need to do fix this problem??? Plus is there any way to figure out what program is causing this issue, so i can uninstall it??
View 14 Replies View RelatedThis issue has just start a couple of days ago were the computer would restart at the point of the boot logo just before the orbs came in, i have tried booting in all safe modes and the computer would restart, tried repair and it restarts before finished loading. I have tried using the os install disk but it also restarts. There is no BSOD. Is there a way to fix this or would i have to replace my motherboard?
View 6 Replies View RelatedI had a retail version of the genuine edition of Windows 7 Ultimate edition, but I threw away the disk upon moving. However I do still have the CD key for it.I'm wondering how I can do a reformat of the hard drive without a CD/DVD. If there's an official ISO file out there anywhere, I could just enter my CD key again.I have no way of getting to the desktop right now because of BSOD on boot.
View 3 Replies View Related